160TG001

Terminal blocks
G - Distribution terminal blocks

Summary

1. Distribution bars

Screw clamp ground terminal block ...................................................................................... 384

Connection with 18 x 3 mm collector bar ............................................................................. 385
Bars with base for ground wire .............................................................................................. 386
Busbar clamp ......................................................................................................................... 387

2. Distribution terminal blocks

Phases - Ground assemblies ................................................................................................. 388

Single pole distribution blocks .............................................................................................. 390
Three pole distribution blocks ............................................................................................... 392
Four pole distribution blocks ................................................................................................. 392

383
 160T01050

Ground terminal block E 10/13.P

Screw clamp Spacing 13 mm (.512")
DIN 1 (EN 50035, DIN 46277/1, NFL 63018)

Type Part number Type Part numbers

1 Screw clamp
Can also be used as end stop
E 10/13.P 1SNA 162 855 R2300

Characteristics NFC DIN UL CSA NFC DIN UL CSA

Wire size Screw Rigid 0-16 mm² 16-8 AWG

clamp Flexible 0-10 mm² 16-8 AWG

Rated currend A 85
Rated wire size mm²/AWG 10 mm² 8 AWG
Wire strip. Recomm. Recomm. Protection Wire strip. Recomm. Recomm. Protection
Other characteristics length screwdriver torque length screwdriver torque
12 mm 6.5 mm
.47" .25"

Accessories Type Part numbers Type Part numbers

1 Rail 32 x 15 PR1 Z2 1SNA 163 050 R0400
2 Label with symbol "ground" IDTBM 1SNA 167 357 R0400

Distribution of polarities
If the distribution bar is longer than Grey Description Types Part numbers
1 foot (300 mm) use an intermediate BADH 1SNA 116 900 R2700
end stop for support. In this case the Grey Copper bar BO3 1000 x 10 x 3 mm 1SNA 164 406 R2400
precut bar passages need to be
BAEH 1SNA 116 934 R0400
punched out of the end stop. Wire clamp SFB1 20-2 AWG (0.5-35 mm²) 1SNA 163 860 R0500
Wire clamp SFB2 6-2 AWG (16-35 mm²) 1SNA 168 956 R0600

This end stop is also recommended :

1 - For use with neutral switch blocks series "NT"

G
1

cut-out
partition

2 - For use with separators SCFCV4 with protection cover

precut section to punch

for installation of the bar

Max. current : 150 A with a 10 x 3 mm bar

Voltage : 500 V (IEC standard)
A 1/4 inch (6,4 mm) spacing should be used
between clamps.

384
160T01092

Connection with 18 x 3 mm
collector bar
DIN 3

Shield terminals for collector bar

- Mounting on 18 x 3 mm collector bar
- Easy shield connection to a collector bar
- Brass with nickel coating clamp with a steel spring to make
contact without damaging the shield
- Shield terminals available in 4 versions (shield diameter from
1,5 to 24 mm)
- Not designed for wire connection
- Mounting : place the shield of the stripped cable on the
collector bar. Hold the terminal on the shield, press and snap
the terminal onto the collector bar. As soon as the terminal is
released, contact is made on the bar through the spring
pressure.

Characteristics
Shield diameter B (mm) L (mm) H max (mm) Spring force (N) Description P/N
1,5 - 6,5 10 25 40 8 - 13 SFB.B1 1SNA 205 170 R1400

5 - 11 17 25 47 22 - 31 SFB.B2 1SNA 205 171 R0100

10 - 17 23 25 63 32 - 58 SFB.B3 1SNA 205 172 R0200

16 - 24 30 25 78 37 - 53 SFB.B4 1SNA 205 173 R0300

Terminals for collector bar

- 35 mm² terminal for 18 x 3 mm collector bar.
- Stainless steel clamp and screw
- Insulating part in polyamid 6,6 without halogen
- Possibility to print 3 characters per marker
If a separate ground is required, isolated mounting on rail
should be made through a bar holder P/N 1SNA 205 176
R0600

SFB.P 1SNA 205 174 R0400

Bar holder (isolated from ground)

- To be screwed on plate or snapped onto DIN 3 rail
- Thermoplastic material, black colour
- Spacing : 12 mm .473"

G
DSPBO.PI 1SNA 205 176 R0600 1

Collector bar
- Electroplated copper with tin coating 18 x 3 x 1000 mm
BO 318 1SNA 205 175 R0500

Bar holder (connected to the mounting rail)

- To be snapped onto DIN 3 rail.
- Thermoplastic material, black colour.
- Tined coated steel socket
- Spacing : 10 mm .394"

DSPBO.P 1SNA 205 177 R0700

385
 160T01125

Bars with base for DBTI

ground wire 7 outputs 12 outputs

DIN 3

M5 screw M5 screw
slotted Pozidriv slotted Pozidriv
cruciform head cruciform head
53.5 2.11” 90.5 3.56”

354”
354”

9
9
6 6
.236” .236”
Ø 5.5
.216” 17 Ø 5.5
5 .669” .216”
22 50 22 50

32,5 1.27”
.197”

25 .984”
32,5 1.27”
.866” 1.98” .866” 1.98”

25 .984”
center of rail 25 center of rail 25
.984 .984

Blue or green base - Mounting on DIN 3 rail Blue or green base - Mounting on DIN 3 rail

Type P/N Type P/N

7 outputs blue base 12 outputs blue base

DBTI 1SNA 356 100 R1500 DBTI 1SNA 356 102 R0300
PR3.Z2 35 x 7,5 x 1 1SNA 174 300 R1700
PR4 35 x 15 x 2,3 1SNA 168 500 R1200 7 outputs green base 12 outputs green base
PR5 35 x 15 x 1,5 1SNA 168 700 R2200
Other rails : see section on accessories. DBTI 1SNA 356 101 R0200 DBTI 1SNA 356 103 R0400

Characteristics IEC UL CSA IEC UL CSA

Connection
- Screw clamp 7 outputs 12 outputs
- Max. wire size 10 mm² 10 mm²

Torque on screw 1.5 Nm 13.3 Ib.in 13.3 Ib.in 1.5 Nm 13.3 Ib.in 13.3 Ib.in
Screw M5 M5 M5 M5 M5 M5

G
1

Type P/N Type P/N

Characteristics IEC UL CSA IEC UL CSA

386
160T01051

Busbar clamp SPBO Mounting on rail PR1 with mounting foot

ACD13-6 1SNA 113 135 R0000 (DIN 1 - DIN 3)
10 x 3 or 6 x 6 or 15 x 6 mm Spacing 20 mm (.787")
.34 x .12 or .23 x .23 or .59 x .23"
DIN 1 - 2 - 3 or panel mount

Mounting on rail PR2 with mounting foot

ACD23-6 1SNA 118 005 R2700 (DIN 2 - DIN 3)

Colour Type Part number

Reversible grey clamp
SPBO 1SNA 114 712 R1300

Mounting on rails PR3, PR30, PR4, PR5

with mount.foot ACD13-6 1SNA 113 135 R0000 (DIN 1 - DIN 3)
Characteristics
Wire size NFC DIN UL CSA

Screw Rigid
Rail 35 x 7,5 x 1 PR3.Z2 1SNA 174 300 R1700 clamp Flexible
Rail 35 x 15 x 2,3 PR4 1SNA 168 500 R1200
Rail 35 x 15 x 1,5 PR5 1SNA 168 700 R2200 Neutral bar see beside
Rail 32 x 15 x 1,5 PR1.Z2 1SNA 163 050 R0400 Voltage
Other end stops, rails and accessories : see section on accessories. Rated ~ AC 750 V Gr.C
Rated = DC 660 V Gr.C
Notes Pollution degree
Current
Rated
Wire size
Rated / Gauge with mount.foot ACD23-6 1SNA 118 005 R2700 (DIN 2 - DIN 3)
Wire strip. Recomm. Recomm. Protection
length screwdriver torque

Accessories Type Part numbers

1 Locking foot ACD13-6 for rail DIN 1 or DIN 3 1SNA 113 135 R0000
1 ACD23-6 for rail DIN 2 or DIN 3 1SNA 118 005 R2700
2 Busbar BO3 10x3 mm 1SNA 164 406 R2400
BO6 15x6 mm 1SNA 168 417 R2200

2
3 Wire clamp SFB1 for BO3 - 20-2 AWG (0,5-35mm²)
SFB2 for BO3 - 6-2 AWG (16-35mm²)
1SNA 163 860 R0500
1SNA 168 956 R0600
G
SFB3 for BO6 - 4-00 AWG (19-95mm²) 1SNA 168 690 R1000
1
3
Mounting on panel by M4 screw

Various options of placing the busbars

on the busbar clamp
BO3 BO6
Busbars 10 x 3 6x6 15 x 6

Option n° 1 X

Option n° 2 X

Option n° 3 X
R
R See section on markers Option n° 4 X X
marking method RC610
Option n° 5 X X

387
 160T01052

Distribution terminal blocks MB 4/6.L... MB 6/8.L...

· phase MB 4/6.P... MB 6/8.P...
· ground Spacing 6 mm (.238") Spacing 8 mm (.315")

DIN 1-3

Colour Type Part numbers Colour Type Part numbers

L
Nb of L
Nb of
Phases blocks mm Phases blocks mm
End stop th. 9 mm BADL V0 1SNA 399 903 R0200 Grey 2 14,5 MB 4/6.L2 1SNA 115 406 R1300 Grey 2 18,5 MB 6/8.L2 1SNA 115 413 R0100
End stop th. 10 mm BAM2 V2 1SNA 206 351 R1600
Grey 3 20,5 MB 4/6.L3 1SNA 115 407 R1400 Grey 3 26,5 MB 6/8.L3 1SNA 115 414 R0200
End stop th. 10 mm BAM2 V0 V0 1SNA 296 351 R0000
Rail 35 x 7,5 x 1 PR3.Z2 1SNA 174 300 R1700 Grey 4 26,5 MB 4/6.L4 1SNA 115 408 R2500 Grey 4 34,5 MB 6/8.L4 1SNA 115 415 R0300
Rail 35 x 15 x 2,3 PR4 1SNA 168 500 R1200 Grey 5 32,5 MB 4/6.L5 1SNA 115 409 R2600 Grey 5 42,5 MB 6/8.L5 1SNA 115 416 R0400
Rail 35 x 15 x 1,5 PR5 1SNA 168 700 R2200 Grey 6 38,5 MB 4/6.L6 1SNA 115 410 R1200 Grey 6 50,5 MB 6/8.L6 1SNA 115 417 R0500
Rail 32 x 15 x 1,5 PR1.Z2 1SNA 163 050 R0400 Grey 8 50,5 MB 4/6.L8 1SNA 115 411 R0700 Grey 8 66,5 MB 6/8.L8 1SNA 115 418 R1600
Other end stops, rails and accessories : see section on accessories. Grey 10 62,5 MB 4/6.L10 1SNA 115 412 R0000 Grey 10 82,5 MB 6/8.L10 1SNA 115 419 R1700
Ground (no electrical connection ro rail) Ground (no electrical connection ro rail)
Notes Green-Yellow 2 14,5 MB 4/6.P2 1SNA 165 420 R2600 Green-Yellow 2 18,5 MB 6/8.P2 1SNA 165 427 R1100
The use of some accessories may decrease the block's Green-Yellow 3 20,5 MB 4/6.P3 1SNA 165 421 R1300 Green-Yellow 3 26,5 MB 6/8.P3 1SNA 165 428 R2200
voltage rating. For more information, consult us. Green-Yellow Green-Yellow 4 34,5 MB 6/8.P4 1SNA 165 429 R2300
4 26,5 MB 4/6.P4 1SNA 165 422 R1400
Green-Yellow 5 32,5 MB 4/6.P5 1SNA 165 423 R1500 Green-Yellow 5 42,5 MB 6/8.P5 1SNA 165 430 R2000
Green-Yellow 6 38,5 MB 4/6.P6 1SNA 165 424 R1600 Green-Yellow 6 50,5 MB 6/8.P6 1SNA 165 431 R1500
Example of application : Green-Yellow 8 50,5 MB 4/6.P8 1SNA 165 425 R1700 Green-Yellow 8 66,5 MB 6/8.P8 1SNA 165 432 R1600
Green-Yellow 10 62,5 MB 4/6.P10 1SNA 165 426 R1000 Green-Yellow 10 82,5 MB 6/8.P10 1SNA 165 433 R1700

Characteristics Characteristics
Wire size IEC UL CSA Wire size IEC UL CSA
NFC DIN NFC DIN
Screw Rigid 0,2-4 mm² 22-10 AWG 22-12 AWG Screw Rigid 0,5-10 mm² 22-8 AWG 20-8 AWG
clamp Flexible 0,22-4 mm² 22-10 AWG 22-12 AWG clamp Flexible 0,5-6 mm² 22-8 AWG 20-8 AWG

Voltage Voltage
Rated 800 V 600 V 600 V Rated 800 V 600 V 600 V
Impulse withstand 8 kV Impulse withstand 8 kV
G The monobloc connector bar ensures perfect
continuity between input and distribution. Each
Pollution degree 3 Pollution degree 3
Current Current
block has 2 Screw clamp terminals. Rated Short-circuit 32A 300A/1s 20 A 25 A Rated Short-circuit 41A 720A/1s 50 A 35 A
2 Wire size Wire size
Rated / Gauge 4 mm²/A4 10 AWG 10 AWG Rated / Gauge 6 mm² 8 AWG 8 AWG
Wire strip. Recomm. Recomm. Protection Wire strip. Recomm. Recomm. Protection
length screwdriver torque length screwdriver torque
9,5 mm 4 mm 0,5-0,8 Nm IP20 12 mm 4-5 mm 0,8-1 Nm IP20
.37" .16" 4.5-7.1 lb.in NEMA 1 .47" .16-.20" 7.1-8.9 lb.in NEMA 1
Accessories Type Part numbers Type Part numbers
1 Test socket AL2 DIA. 2 mm 1SNA 163 043 R2100 AL2 DIA. 2 mm 1SNA 163 043 R2100
1
AL3 DIA. 3 mm 1SNA 163 261 R0000 AL3 DIA. 3 mm 1SNA 163 261 R0000
AL4 DIA. 4 mm 1SNA 163 262 R0100
2 Test device DCJ yellow 1SNA 173 059 R0300 DCO orange 1SNA 173 060 R0000
2 3 Test plug FC2 DIA. 2 mm 1SNA 007 865 R2600 FC2 DIA. 2 mm 1SNA 007 865 R2600
FC4 DIA. 4 mm 1SNA 167 860 R0100
3 4 Assembled jumper bar BJM6 2 to 10 poles (1) BJM8 2 to 10 poles (1)
(without IP 20 protection)
4 Assembled jumper bar BJMI6 2 to 10 poles (1) BJMI8 2 to 10 poles (1)
4 (with IP 20 protection)
5 Shield connector CBM5 th. 0,5 mm 1SNA 178 745 R1400
5 CBM8 th. 0,8 mm 1SNA 178 746 R1500

R R See section on markers

marking method RC65 - RC610 RC810
Note : (1) See section : accessories

388
160T01048

MB 10/10.L... MB 70/10.L... MB 2x70/10.L...

MB 10/10.P... MB 70/10.P... MB 2x70/10.P...
Spacing 10 mm (.394") Spacing 10 mm (.394") with single connection point Spacing 10 mm (.394") with double connection point

Colour Type Part numbers Colour Type Part numbers Colour Type Part numbers
L
Nb of Nb of L Nb of L
Phases blocks mm Phases blocks mm Phases blocks mm
Grey 2 22,5 MB 10/10.L2 1SNA 115 328 R2300 Grey 2x1 54 MB 70/10.L2 1SNA 115 335 R1200 Grey 2x4 143 MB 2x70/10.L8 1SNA 115 342 R2100
Grey 3 32,5 MB 10/10.L3 1SNA 115 329 R2400 Grey 2x2 74 MB 70/10.L4 1SNA 115 336 R1300
Grey 4 42,5 MB 10/10.L4 1SNA 115 330 R2100 Grey 2x3 94 MB 70/10.L6 1SNA 115 337 R1400
Grey 5 52,5 MB 10/10.L5 1SNA 115 331 R1600 Grey 2x4 114 MB 70/10.L8 1SNA 115 338 R2500
Grey 6 62,5 MB 10/10.L6 1SNA 115 332 R1700
Grey 8 82,5 MB 10/10.L8 1SNA 115 333 R1000
Grey 10 102,5 MB 10/10.L10 1SNA 115 334 R1100
Ground (no electrical connection to rail) Ground (no electrical connection to rail) Ground (no electrical connection to rail)
Green-Yellow 2 22,5 MB 10/10.P2 1SNA 165 343 R0400 Green-Yellow 2x1 54 MB 70/10.P2 1SNA 165 350 R1700 Green-Yellow 2x4 143 MB 2x70/10.P8 1SNA 165 357 R0200
Green-Yellow 3 32,5 MB 10/10.P3 1SNA 165 344 R0500 Green-Yellow 2x2 74 MB 70/10.P4 1SNA 165 351 R0400
Green-Yellow 4 42,5 MB 10/10.P4 1SNA 165 345 R0600 Green-Yellow 2x3 94 MB 70/10.P6 1SNA 165 352 R0500
Green-Yellow 5 52,5 MB 10/10.P5 1SNA 165 346 R0700 Green-Yellow 2x4 114 MB 70/10.P8 1SNA 165 353 R0600
Green-Yellow 6 62,5 MB 10/10.P6 1SNA 165 347 R0000
Green-Yellow 8 82,5 MB 10/10.P8 1SNA 165 348 R1100
Green-Yellow 10 102,5 MB 10/10.P10 1SNA 165 349 R1200

Characteristics Characteristics Characteristics

Wire size IEC UL CSA Wire size IEC UL CSA Wire size IEC UL CSA
NFC DIN NFC DIN NFC DIN
Compression Rigid 0,5-16 mm² 22-6 AWG 18-6 AWG Compression Rigid 0,5-16 mm² 22-6 AWG 14-6 AWG Compression Rigid 0,5-16 mm² 22-6 AWG 14-6 AWG
clamp Flexible 0,5-10 mm² 22-6 AWG 18-6 AWG clamp Flexible 0,5-10 mm² 22-6 AWG 14-6 AWG clamp Flexible 0,5-10 mm² 22-6 AWG 14-6 AWG
Max. 95 mm² 00 AWG 00 AWG max. Max. 2x95 mm² 00 AWG 00 AWG max.
Lugs Lugs
Rated 70 mm² 00 AWG 00 AWG max. Rated 2x70 mm² 00 AWG 00 AWG max.
Voltage Voltage Voltage
Rated 800 V 600 V 600 V Rated 800 V 600 V 600 V Rated 800 V 600 V 600 V
Impulse withstand 8 kV Impulse withstand 8 kV Impulse withstand 8 kV
Pollution degree 3 Pollution degree 3 Pollution degree 3 G
Current Current Current
Rated Short-circuit 63A 1200A/1s 65 A 50 A Rated Short-circuit 63A 1200A/1s 200 A 200 A Rated Short-circuit 63A 1200A/1s 200 A 200 A
Wire size Wire size Wire size
2
Rated / Gauge 10 mm² 6 AWG 6 AWG Rated / Gauge 10 mm² 6 AWG 6 AWG Rated / Gauge 10 mm² 6 AWG 6 AWG
Wire strip. Recomm. Recomm. Protection Wire strip. Recomm. Recomm. Recomm. Wire strip. Recomm. Recomm. Recomm.
length screwdriver torque length screwdriver torque (screws) torque (lugs) length screwdriver torque (screws) torque (lugs)
12 mm 5,5-6 mm 1,2-1,4 Nm IP20 12 mm 5,5-6 mm 1,2-1,4 Nm 6 Nm 12 mm 5,5-6 mm 1,2-1,4 Nm 6 Nm
.47" .22-.24" 10.6-12.3 lb.in NEMA 1 .47" .22-.24" 10.6-12.3 lb.in 52 lb.in .47" .22-.24" 10.6-12.3 lb.in 52 lb.in

Type Part numbers Type Part numbers Type Part numbers

AL2 DIA. 2 mm 1SNA 163 043 R2100 AL2 DIA. 2 mm 1SNA 163 043 R2100 AL2 DIA. 2 mm 1SNA 163 043 R2100
AL3 DIA. 3 mm 1SNA 163 261 R0000 AL3 DIA. 3 mm 1SNA 163 261 R0000 AL3 DIA. 3 mm 1SNA 163 261 R0000
AL4 DIA. 4 mm 1SNA 163 262 R0100 AL4 DIA. 4 mm 1SNA 163 262 R0100 AL4 DIA. 4 mm 1SNA 163 262 R0100

FC2 DIA. 2 mm 1SNA 007 865 R2600 FC2 DIA. 2 mm 1SNA 007 865 R2600 FC2 DIA. 2 mm 1SNA 007 865 R2600
FC4 DIA. 4 mm 1SNA 167 860 R0100 FC4 DIA. 4 mm 1SNA 167 860 R0100 FC4 DIA. 4 mm 1SNA 167 860 R0100
BJM10 2 to 10 poles (1) BJM10 2 to 4 poles (1) BJM10 2 to 4 poles (1)

BJMI10 2 to 10 poles (1) BJMI10 2 to 4 poles (1) BJMI10 2 to 4 poles (1)

RC65 - RC610 RC810 RC1010 RC65 - RC610 RC810 RC1010 RC65 - RC610 RC810 RC1010
Note : (1) See section : accessories

389
 160T01109

Single pole distribution BRU 80 A BRU 125 A BRU 160 A

blocks

mount
base mount

base mount

base
DIN 3

center of rail

center of rail center of rail

Axis-Axis Axis-Axis Axis-Axis

Oblong hole Oblong hole Oblong hole Oblong hole Oblong hole
for screw DIA.
Oblong hole
for screw DIA.
1

Wire size
10 to 70 mm²
8-00 AWG

Rail (DIN 3) or base mounted (M5 screw)

Colour : grey

Three holes on unit top allow wire entry

from top or bottom.
Rail (DIN 3) or base mount with 2 x M5
BADL th. 9 mm V0 1SNA 399 903 R0200 Rail (DIN 3) or base mounted (M5 screw)
screws. Unit may be mounted
BAM2 th. 10 mm V2 1SNA 206 351 R1600 Colour : grey
horizontally or vertically.
BAM2 V0 th. 10 mm V0 1SNA 296 351 R0000 Jumper bar : 2 spades 20 mm² or
Finger contact protection IP 20.
BADH th. 12 mm V2 1SNA 116 900 R2700 8 spades 20 mm² (to be cut)
BAMH th. 9,1 mm V2 1SNA 114 836 R0000
BAMH V0 th. 9,1 mm V0 1SNA 194 836 R0100
PR3.Z2 35 x 7,5 x 1 1SNA 174 300 R1700 Type P/N Type P/N Type P/N
PR4 35 x 15 x 2,3 1SNA 168 500 R1200
PR5 35 x 15 x 1,5 1SNA 168 700 R2200 Grey body Grey body Grey body
Other end stops, rails and accessories : see section on BRU 80 A 1SNA 356 208 R2500 BRU 125 A 1SNA 356 204 R1100 BRU 160 A 1SNA 356 200 R2100
accessories.

Characteristics IEC UL/CSA IEC UL/CSA IEC UL/CSA

Rated voltage 690 V 600 V 690 V 600 V 690 V 600 V
Rated current 80 A 80 A 125 A 125 A 160 A 160 A
Inputs (maximum wire size) 2,5 - 16 mm² 14 - 4 AWG 10 - 70 mm² 8 - 00 AWG
left input wire size 10 -35 mm² 8 -2 AWG
right input wire size 6 -16 mm² 10 -6 AWG
Recommended torque 1.5 Nm 1.5 Nm 3,5 Nm 31 Ib.in 4 Nm 35 Ib.in
Recommended torque wrench Allen key/4 mm Allen key/4 mm 6 flats/5 mm 6 flats/5 mm
Outputs
G with ferrules
without ferrules
4 x 2,5 to 16 mm²
6 x 2,5 to 16 mm²
14 AWG to 6 AWG
14 AWG to 6 AWG 6 x 2,5 to 16 mm² 14 AWG to 6 AWG
Recommended torque 2 Nm 17.6 Ib.in 2 Nm 17.6 Ib.in

2 wire size with/without ferrule 2 x 16 mm² 14 AWG to 4 AWG

Recommended torque 1,5 Nm 1,5 Nm
wire size with or without ferrule 4 x 2.5 to 6 mm² 14 AWG to 10 AWG
Recommended torque 0.8 Nm 0.8 Nm
Screwdriver Posidriv Z2 or flat
Posidriv Z2 or flat
Weight Weight Weight
73 gr 137 gr 234 gr
0.16 Ib 0.3 Ib 0.516 Ib

Accessories Type P/N Type P/N Type P/N

1 Jumper bar Coupling with wire (6 - 16 mm²) PCF.1.2 2 spades 1SNA 356 205 R1200
PCF.1.8 8 spades 1SNA 356 206 R1300
2 Busbar 16 x 5 mm 160 A BO 16/5 2 poles 1SNA 356 201 R1600
BO 16/5 3 poles 1SNA 356 202 R1700
BO 16/5 4 poles 1SNA 356 203 R1000

390
160T01053

Single pole distribution BRU 175 BRU 250 A BRU 400 A

blocks
4 0.16"

50 ±0,5 base mount

DIN 3 61 2.4"

59.5
52
0.54"
13.7
17.6 0.69"

45 1.77"
center of rail 37.4

96 ±0,5

10 11
7
2
ø 5.4x5.2 0.21"x0.20"

6
29.5 ±1
44.5

9
1

8
Axis-Axis 84.5 ±1

46.5 1.83"
Oblong holes 5.3 x 7.5 mm

43.5 1.71"
54 2.12"
for screw DIA. 5 mm

Input wire
39.4 1.55" center of rail 0000 AWG Max for BRU 250 A
71 2.8"
350 MCM Max for BRU 400 A

Allen key
6 flats hollow

BADL th. 9 mm V0 1SNA 399 903 R0200

BAM2 th. 10 mm V2 1SNA 206 351 R1600
BAM2 V0 th. 10 mm V0 1SNA 296 351 R0000
BADH th. 12 mm V2 1SNA 116 900 R2700
BAMH th. 9,1 mm V2 1SNA 114 836 R0000
BAMH V0 th. 9,1 mm V0 1SNA 194 836 R0100
PR3.Z2 35 x 7,5 x 1 1SNA 174 300 R1700 Type P/N Type P/N Type P/N
PR4 35 x 15 x 2,3 1SNA 168 500 R1200
PR5 35 x 15 x 1,5 1SNA 168 700 R2200 Grey body BRU 175 1SNA 356 212 R0000 Grey body BRU 250 A 1SNA 179 657 R1500 Grey body
Other end stops, rails and accessories : see section on BRU 400 A 1SNA 179 650 R2200
accessories. Black body BRU 250 ALU 1SNA 356 207 R1400

Characteristics IEC UL/CSA IEC UL/CSA IEC UL/CSA

Rated voltage 690 V 600 V 690 V 600 V 690 V 600 V
Rated current 175 A 175 A 250 A 230 A 400 A 310 A
Input (min. - max. wire size) 16 - 70 mm² 6 AWG - 2/0 AWG 35 - 120 mm² 2 - 0000 AWG 95 - 185 mm² 000 AWG - 350 MCM
Recommended torque 6 Nm 55.2 Ib.in 19 Nm 170 Ib.in 25 Nm 230 Ib.in
Allen key 6 flats/5 mm 6 flats/5 mm 6 flats/6 mm 6 flats/6 mm 6 flats/8 mm 6 flats/8 mm
Outputs
wire size with ferrule 10 x 2,5 to 16 mm² 10 x14AWG to 4AWG 2 x 2,5 to 25 mm² 2x14AWG to 4AWG 2 x 2,5 to 25 mm² 2x14AWG to 4AWG
wire size without ferrule 10 x 2,5 to 16 mm² 10 x14AWG to 4AWG 2 x 2,5 to 35 mm² 2x14AWG to 2AWG 2 x 2,5 to 35 mm² 2x14AWG to 2AWG
Recommended torque
wire size with/without ferrule
3 Nm 27.6 Ib.in 3,5 Nm
5 x 2,5 to 16 mm²
31 Ib.in
5x14AWG to 6AWG
3,5 Nm
5 x 2,5 to 16 mm²
31 Ib.in
5x14AWG to 6AWG
G
Recommended torque 2 Nm 18 Ib.in 2 Nm 18 Ib.in
wire size with or without ferrule 4 x 2,5 to 10 mm² 4x14AWG to 8AWG 4 x 2,5 to 10 mm² 4x14AWG to 8AWG
Recommended torque 2 Nm 18 Ib.in 2 Nm 18 Ib.in
2

Weight Weight Weight

BRU 250 A BRU 250 ALU
230 gr 450 gr 220 gr 450 gr
0.507 lb 0.992 Ib 0.485 lb 0.992 Ib

Accessories Type P/N Type P/N Type P/N

391
 160t01165

Three and four pole BRT 115 A BRT 175 A BRTC 125 A
distribution blocks Three pole Three pole Four pole
DIN 3

mount

mount
base

base
center of rail center of rail center of rail

Axis - Axis Axis - Axis

Three pole
Axis - Axis

Axis - Axis

Axis - Axis

Axis - Axis
Oblong hole Oblong hole

Oblong hole

Four pole

BADL th. 9 mm V0 1SNA 399 903 R0200

BAM2 th. 10 mm V2 1SNA 206 351 R1600
BAM2 V0 th. 10 mm V0 1SNA 296 351 R0000
BADH th. 12 mm V2 1SNA 116 900 R2700
BAMH th. 9,1 mm V2 1SNA 114 836 R0000
BAMH V0 th. 9,1 mm V0 1SNA 194 836 R0100
PR3.Z2 35 x 7,5 x 1 1SNA 174 300 R1700 Type P/N Type P/N Type P/N
PR4 35 x 15 x 2,3 1SNA 168 500 R1200
PR5 35 x 15 x 1,5 1SNA 168 700 R2200 Grey body Grey body Grey body
Other end stops, rails and accessories : see section on BRT 115 A 1SNA 356 209 R2600 BRT 175 A 1SNA 356 210 R2100 BRTC 125 A 1SNA 356 211 R0700
accessories.

Characteristics IEC UL/CSA IEC UL/CSA IEC UL/CSA

Rated voltage 690 V 600 V 690 V 600 V 690 V
Rated current 125 A 115 A 175 A 175 A 125 A
Inputs 10 to 35 mm² 8 to 2 AWG 16 to 70 mm² 6 to 2/0 AWG 10 to 35 mm²

Recommended torque 6 Nm 53.1 lb. in 6 Nm 53.1 lb. in 1,5 to 3 Nm

Recommended torque wrench 6 flats 4mm 6 flats 5 mm
Outputs 6 x 2,5 to 16 mm² 6 x 14 to 4 AWG 6 x 2,5 to 16 mm² 6 x 14 to 4 AWG 5 x 1 to 6 mm²

G 2 x 1,5 to 10 mm²

Recommended torque 3 Nm 26.53 lb. in 3 Nm 26.53 lb. in 0,8 to 1,2 Nm

Recommended torque wrench 6 flats 3mm 6 flats 3mm
2 Neutral 6 x 1,5 to 10 mm²
4 x 1,5 to 6 mm²
Recommended torque 0,8 to 1,2 Nm

Weight Weight Weight

400 gr 400 gr 320 gr

Accessories Type P/N Type P/N Type P/N

1 Jumper bar Coupling with wire Coupling with wire Coupling with wire

392
160T01054

Four pole BRT 80 A BRT 125 A BRT 160 A

distribution blocks
DIN 3

BADL th. 9 mm V0 1SNA 399 903 R0200

BAM2 th. 10 mm V2 1SNA 206 351 R1600 Rail or base mounted Rail or base mounted Rail or base mounted
BAM2 V0 th. 10 mm V0 1SNA 296 351 R0000 Colour : grey Colour : grey Colour : grey
BADH th. 12 mm V2 1SNA 116 900 R2700
BAMH th. 9,1 mm V2 1SNA 114 836 R0000
BAMH V0 th. 9,1 mm V0 1SNA 194 836 R0100
PR3.Z2 35 x 7,5 x 1 1SNA 174 300 R1700 Type P/N Type P/N Type P/N
PR4 35 x 15 x 2,3 1SNA 168 500 R1200
PR5 35 x 15 x 1,5 1SNA 168 700 R2200 Grey body Grey body Grey body
Other end stops, rails and accessories : see section on BRT 80 A 1SNA 179 534 R2200 BRT 125 A 1SNA 179 535 R2300 BRT 160 A 1SNA 179 892 R2200
accessories.

Characteristics IEC UL CSA IEC UL CSA IEC UL CSA

Rated voltage 600 V 600 V 600 V 600 V 600 V

Rated current 80 A 65 A 125 A 65 A 160 A
Short circuit current 21,6 kA / 3 kA 1s. 21,6 kA 29,6 kA / 4,2 kA 1s. 29,6 kA 20 kA / 6,2 kA 1s.
Input 16 mm² 6 AWG 35 mm² 4 - 2 AWG 10 to 50 m²
Outputs (with ferrule) 8 x 10 mm² 8 x 8 AWG 4 x 16 mm² 4 x 6 AWG 3 x 6 to 35 mm²
7 x 10 mm² 7 x 8 AWG 8 x 2,5 to 16 mm²

G
2

Weight Weight Weight

210 gr 300 gr 380 gr
0.463 lb 0.661 lb 0.837 lb

Accessories Type P/N Type P/N Type P/N

393