Scribd
Upload
152 views2 pages

GV55 Quick Start

This document provides instructions for basic operation of the GV55N tracking device: 1. Check included parts and install the SIM card, battery, and USB driver on the computer. 2. Connect the GV55N to the computer and run the management tool to configure reporting parameters like SMS or TCP mode. Input server IP, APN, and other settings. 3. Set scheduled position reports and Geo-fence rules using the management tool to enable basic tracking functions. More advanced functions are described in other documents.

Uploaded by

João Paulo Machado Claro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
152 views2 pages

GV55 Quick Start

This document provides instructions for basic operation of the GV55N tracking device: 1. Check included parts and install the SIM card, battery, and USB driver on the computer. 2. Connect the GV55N to the computer and run the management tool to configure reporting parameters like SMS or TCP mode. Input server IP, APN, and other settings. 3. Set scheduled position reports and Geo-fence rules using the management tool to enable basic tracking functions. More advanced functions are described in other documents.

Uploaded by

João Paulo Machado Claro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

GV55N Quick Start

Page 1 : Basic Operation

Check Parts List Open the case

triangular-pry-opener

The USB Data_Cable_M is


not in the delivery list.
Please contact your vendor
for it.

Install SIM Card Install the battery Close the case Switch ON Battery

Find “PL2303_Prolific_DriverInstaller_v1_9_0.rar
” in develop suit and install the drive for PL2303. If
you have already installed it please go to Step 6. Connect GV55N to computer by USB
Da-

To mini USB

To computer

Find “Queclink GV55N Manage Tool Vx.xx.exe” in develop suit


and run it to configure the running parameters of GV55N.
Please refer to Page 2 for detail.
Page 2 : PC Manage Tool Quick Start
If you want to test the GV55N by SMS then set “Report
Run manager tool. Select correct Com port and in- Mode” to “SMS” and input the phone number which
put default password “gv55n”. Then press OK. you want to receive the SMS from GV55N. After that
you can go to Step 6.

Otherwise please go to Step 3

k
Set “Report Mode” to “TCP Short Connection”. input the Please contact your SIM card provider and get the

n
IP address and port number of the backend server. APN information for GPRS. Input it in GTBSI setting.

c l i a l
u e n t i
Q fide
Press the “Send” button and update the parame- Set the parameters of scheduled fixed timing re-

n
ters of GV55N. Then the GV55N can report infor- port so that the GV55N will report it’s position to
mation to your backend server or SMS receiver. backend server period periodically. Press
Note: These commands can also be sent to “Send” button to update the parameters.

o
GV55N by SMS. Follow screen shot shows how to configure the
GV55N to report it’s position every 3 minutes.

C
Command has been accepted when you see the suc-
cess window.

The following screen shot shows how to create a Geo-


Fence rule. Press “Send” button to update the parameters.
After these steps. GV55N will have some
basic tracking functions like scheduled
timing report and Geo-Fence. For other
advanced functions of GV55N please re-
fer to “GV55N @Tracker Air Interface
Protocol” or visit our website.

http://www.queclink.com Queclink

[email protected] Grace Wang


2017.09.28

You might also like