(Common Scheme to all disciplines)

Revised First Year Scheme: Academic Year 2018-19 onwards

GROUP A

(Electrical/Electronics/ Electronics and Telecommunication/Computer/Information Technology)

SEM- I

Course Code Course Name Hr/Week Credits

L T P
1 R4CH1011T Applied Chemistry –I 2 0 0 2
R4CH1011P Applied Chemistry 0 0 2 1
Laboratory -I
2 R4PH 1011T Applied Physics-I 3 0 0 3
R4PH 1011P Applied Physic Laboratory -I 0 0 2 1
3 R4MA1011S Applied Mathematics-I 3 1 0 4
4 R4SA1001T Engineering Mechanics 3 0 0 3
R4SA1001P Engineering Mechanics- 0 0 2 1
Laboratory
5 R4ME1002T Engineering Graphics 2 0 0 2
R4ME1002P Engineering Graphics 0 0 2 1
laboratory
6 R4HM1011L Business English 1 0 2 2
TOTAL 14 1 10 20
SEM-II

Course Code Course Name Hr/Week Credits

L T P
1 R4CH1021T Applied Chemistry-II 2 0 0 2
R4CH1021P Applied Chemistry 0 0 2 1
Laboratory -II
2 R4PH 1021T Applied Physics-II 3 0 0 3
R4PH 1021P Applied Physic Laboratory -II 0 0 2 1
3 R4MA1021S Applied Mathematics - II 3 1 0 4
4 R4EE1001T Basic of Electrical 2 0 0 2
Engineering
R4ME1003T Elements of Mechanical 2 0 0 2
Engineering
5 R4CO1001T Computer Programming 2 0 0 2
R4CO1001P Computer Programming 0 0 4 2
Laboratory
6 R4ME1001L Workshop (Mechanical) 0 0 2 1
14 1 10 20
 Revised First Year Scheme for the Academic year 2018-19 onwards
GROUP B
(Mechanical/Production/Civil/Textile)
SEM I

Course Course Name Hr/Week Credits

Code
L T P
1 R4CH1011T Applied Chemistry-I 2 0 0 2
R4CH1011P Applied Chemistry 0 0 2 1
Laboratory -I
2 R4PH 1011T Applied Physics-I 3 0 0 3
R4PH 1011P Applied Physic Laboratory -I 0 0 2 1
3 R4MA1011S Applied Mathematics- I 3 1 0 4
4 R4EE1001T Basic of Electrical 2 0 0 2
Engineering
R4ME1003T Elements of Mechanical 2 0 0 2
Engineering
5 R4CO1001T Computer Programming 2 0 0 2
R4CO1001P Computer Programming 0 0 4 2
Laboratory
6 R4ME1001L Workshop (Mechanical) 0 0 2 1
14 1 10 20

SEM II

Course Code Course Name Hr/Week Credits

L T P
1 R4CH1011T Applied Chemistry –II 2 0 0 2
R4CH1011P Applied Chemistry Laboratory 0 0 2 1
-II
2 R4PH 1011T Applied Physics-II 3 0 0 3
R4PH 1011P Applied Physic Laboratory -II 0 0 2 1
3 R4MA1011S Applied Mathematics-II 3 1 0 4
4 R4SA1001T Engineering Mechanics 3 0 0 3
R4SA1001P Engineering Mechanics- 0 0 2 1
Laboratory
5 R4ME1002T Engineering Graphics 2 0 0 2
R4ME1002P Engineering Graphics 0 0 2 1
laboratory
6 R4HM1002L Business English 1 0 2 2
Total 14 1 10 20
Programme Name : F. Y. B. Tech Semester I
Course Code : PH1011T
Course Title : Applied Physics I
Teaching Scheme Examination Scheme
L T P TA % IST% ESE% ESE (Hr) Credit
3 0 0 20 20 60 3 3
Course Outcomes (CO’s) for Applied Physics -I
1. Classify, draw, describe, and distinguish crystal structures and their defects.
2. Analyze crystal structures by X-Ray diffraction, distinguish bonds in solids and compute forces
between atoms.
3. Analyze the band theory of solids and semiconductors.
4. Identify and summarize properties and applications of dielectric materials and crystals.
5. Classify and analyze magnetic materials and superconductors.

Course Contents
1 Crystal Structures
Classification of solids, space lattice, atomic basis, unit cell, Crystal systems, Cubic
16hr
crystals (Monoatomic), CCP and HCP, Diatomic Cubic crystals (CsCl2, NaCl, Diamond,
ZnS, Barium Titanate), ligancy 3-8, Crystallographic planes, Miller Indices and
Direction, Inter-planar separation. Crystal defects: Point defects, linear defects,
planer of interfacial defects and bulk or volume defects. X-ray Diffraction: Bragg’s law,
Bragg’s spectrometer, Brags law for determination of crystal structure, x-ray
diffraction methods-Laue’s method, Powder method, Rotating crystal method

2 Bonding in solids 3hr

Force between atoms, bonding in solids, ionic bonding, and cohesive energy of ionic
crystals, Covalent bonding, Metallic bonding, Inert gas crystals, and Hydrogen bonded
crystals.
3 Semiconductor Physics 6hr
Band Theory of Solids: Electrical Conduction, Formation of energy bands, Energy Gap,
Classification of Solids, Energy Band structure of lithium, magnesium and silicon.
Density of states, Fermi-Dirac distribution function, Energy band structure of a
Conductor, Insulator and Semiconductor.
Semiconductors and Insulators: Intrinsic semiconductor-electron and hole
concentration, carrier density, conductivity. Doping– n-type and p-type semiconductor,
Position of Fermi level in extrinsic semiconductor, Hall Effect.
4 Dielectric Materials 7hr
Dielectric Constants, Polarizability - Polar dielectric, non-polar dielectrics, macroscopic
approach, dielectric constant and polarized medium, dielectric susceptibility, Gauss
law in dielectrics, Types of polarization - Electronic, ionic, orientation, space and total.
Internal fields in solids, ClausiusMossotti equation, Dielectrics in alternating fields,
Frequency dependence of the Dielectric constant, Dielectric loss, Dielectric strength,
Ferroelectrics, Piezoelectric and application
5 Magnetic Materials 9hr
Basics Concepts, Classification of magnetic materials, Diamagnetism, Langevin theory
of diamagnetism, paramagnetism, Langevin theory of paramagnetism, ferromagnetism
and its properties, exchange and bonding energy, Anti-ferromagnetism,
Ferrimagnetism, Weiss theory of ferromagnetism, Heisenberg exchange interaction,
 Domain theory of ferromagnetism, Hysteresis, Magnetostriction, soft and hard
magnetic materials and applications.
Superconductivity
Persistent current, critical current density, critical magnetic field- Meissner effect, type
I and type II superconductor, flux quantization, penetration depth, phase diagram, BCS
theory, superconductor junctions, applications

Text Books
1 Applied Physics P K. Mittal I k international
2 Applied Physics I For Science and Engineering, DattatrayWavhal , SELF Publications (2017)

Reference Books
1. Modern Physics, 3rd edition, R Serway, C Moses and C Moyer, Thomson Learning inc., 2005
2. Material Science and Engineering: An Introduction, 6th Edn., Callister W.C. Jr., John Wiley & Sons
3. Introduction to Magnetic Materials, 2nd Edition, B D Cullity, C D Graham, , IEEE Press, A John Wiley
and Sons Inc. Publications, 2009
4. A textbook of Engineering Physics, M N Avadhanulu and P. G. Kshirsagar

Programme Name : F. Y. B. Tech Semester I

Course Code : PH1011P
Course Title : Applied Physics I Laboratory
Teaching Scheme Examination Scheme
L T P 100% CIE Credit
0 0 2 1

Course Outcomes (CO’s) for Applied Physics -I, Laboratory

1. Calculate resistivity, band gap / susceptibility of given materials.

2. Infer magnetic properties of the given material using Hysteresis.
3. Determine Hall Voltage and Carrier concentration of the given semiconductor.
4. Determine velocity of ultrasound in water / dielectric constant and Curie temperature of given
samples.
5. Draw and analyze unit cells, Miller planes and Miller directions

Course Contents
Any 10 experiments from the following

1. Crystal Structure I Unit Dell

2. Crystal Structure II Miller Indices
3. Band gap of Semiconductor by four probe methods
4. Resistivity of solids by four probe method
5. Hall Effect in Semiconductors
6. Hysteresis by Magnetometer
7. Hysteresis loop tracing for a ferromagnetic material
8. Curie temperature by two probe method
9. Dielectric Constant by Parallel Plate Capacitor
10. Susceptibility of solids by Gouy’s method
11. Ultrasonic Interferometer
12. Flaw detection using Ultrasonic
13. Diffusion potential and band gap of P-N junction
14. Diode Characteristics
Programme Name : F. Y. B. Tech Semester II
Course Code : PH1021T
Course Title : Applied Physics II

Teaching Scheme Examination Scheme

L T P TA % IST% ESE% ESE Credit
(hour)
3 0 0 20 20 60 3 3

Course outcomes (CO) for Applied Physics -II

1. Describe properties of light using interference and its applications.

2. Apply concepts of diffraction, polarization and Quantum concepts.
3. Explain basic concepts of Thermodynamics and comprehend the different laws.
4. Apply thermodynamic principles and make conclusions
5. Define the concepts of Special Theory of Relativity.

Course Contents
1 Optics 14hr
Interference:Coherent sources, conditions for sustained interference. Division of
Wave-Front - Fresnel’s Biprism, Division of Amplitude- Wedge-shaped film,
Newton’s Rings, Michelson Interferometer, applications (Antireflection coating,
dielectric mirror, determination of wavelengths).
Diffraction:Difference between interference and diffraction Fraunhofer and Fresnel
diffraction. Fraunhofer diffraction through a single slit, Plane transmission
diffraction grating, absent spectra, dispersive power, resolving power and Rayleigh
criterion of resolution and Applications
Polarization:Polarized and un-polarized light, Malus law Uniaxial crystals double
refraction, Nicol prism, quarter and half wave plates, Detection and Production of
different types of polarized light, Polarimetry; Optical and specific rotation, Biquartz
and Laurent’s half shade polarimeter, Applications.
2 Quantum Mechanics 4hr
Difficulties with Classical physics, Black Body radiations, Discovery of Planck’s
constant, Concept of de Broglie‟s Matter waves, phase velocity and group velocity,
derivation of wavelength of matter waves in different forms, Heisenberg’s
Uncertainty principle, illustration- why an electron cannot exist in the nucleus;
Concept of wave function Ψ and interpretation of |Ψ|2

3 Thermodynamics 16hr
Basic concepts of thermodynamics, Concept of temperature and Zeroth law, work,
heat and first law of thermodynamics and its application, Carnot’s cycle, Second law
of thermodynamics, Kelvin-Plank and Clausius statement, Carnot theorem, Heat
Pump, Stirling Engine, Entropy, disorder and second law, Clausius-clapeyrons latent
heat equation, Third law of thermodynamics
4 Special theory of relativity 6hr
Frame of Reference (Inertial and Non-inertial), Galileo Principle of Relativity,
Galilean Transformations, Failure of Galilean Transformations, Einstein principle of
Relativity, The Lorentz Transformations (Co-ordinate and velocity) and conclusion,
Michelson –Morley Experiment, Consequences of special Relativity, Simultaneity of
 two Events, Length Contraction, Time Dilation, The Relativistic mass, Momentum,
Relation between momentum and energy.

Text Book
1. Engineering thermodynamics P.K. Nag, CRC press,2nd edition (2004)
2. Optics, Brijlal&Subramaniam, S.Chand& Co. (2008)
3. Applied Physics II, For Science and Engineering, DattatrayWavhal, SELF Publications (2016),

Reference Books
1. Thermodynamics & Statistical Mechanics, Keith Stowe, 2nd Edition, Cambridge University Press
2. Quantum Computation & Quantum Information, Nielsen M. A., I. L. Chuang, Cambridge Univ. Press
3. Thermodynamics: An Engineering Approach, Cengel& Boles, Tata McGraw-Hill, New Delhi ,Vth
Edition (2007)
4. Concepts of Modern Physics Arthur Beiser, McGraw-Hill-Science, edition no.6,(2002-03)
5. Relativity A. Einstein, Walker & Co publisher.

Programme Name : F. Y. B. Tech Semester II

Course Code : PH1021P
Course Title : Applied Physics -II Laboratory
Teaching Scheme Examination Scheme
L T P 100% CIE Credit
0 0 2 1

Course Outcomes (CO’s) for Applied Physics -II, Laboratory

1. Calculate diameter and radius of curvature of lens using Newton’s Rings.
2. Determine thickness of wire by interference and optical activity by polarimeter.
3. Develop proficiency in making measurements using spectrometer / interferometer.
4. Test the functions of a CRO by measurements and calculate grating element using Laser
Diffraction.
5. Use photoelectric effect to determine Planck’s constant.

Course Contents
Any 10 experiments from the following
1. Newton’s Ring Experiment
2. Wedge shape Method
3. Michelson Interferometer
4. Wavelength and energy measurement of spectral lines using spectrometer
5. Laser diffraction method
6. Specific rotation of Cane sugar solution using polarimeter.
7. Polarization of light and verification of Malus law
8. CRO based measurements
9. Plank’s constant determination
10. e/m by Thomson Method
11. Fresnel Biprism
12. Refractive Index of hollow prism
13. Heat conduction in solids
14. Specific heat capacity measurements
15. Heat conduction in bad conductor
Course Name : F.Y. B. Tech. SEMESTER - I

Course Code : CH1011T

Subject Title : Engineering Chemistry-I

Teaching and Examination Scheme:

Teaching Scheme Examination Scheme

ESE [W]
L T(tutorial) P TA (%) IST (%) ESE (%) Credits
Hrs

02 - 2 20 20 60 02 03

Course Outcome (CO) of Engineering Chemistry - I

 The students will be able to
1. Correlate the different chemical reaction mechanisms that are used in the synthesis of
organic materials.
2. Analyse water for its different types of hardness & adopt suitable method of treatment
suitable for various industrial applications.
3. Select appropriate Lubricant for different service conditions based on the mechanism of
lubrication and alloys based on their composition and properties.
4. Differentiate different polymers based on their structure, mechanism of polymerization,
and fundamental properties.
5. Rationalise the concept of adsorption theory and it's relevance in catalysis.

CourseContents: -
Module1: F U N D A M E N T A L S O F R E A C T I O N M E C H A N I S M S 2L
Classification of reactions,Organic reactions involving substitution, addition, elimination, oxidation,
cyclization, and ring opening reactions.

Module2:POLYMER CHEMISTRY 6
BasicsofPolymerChemistry, classification of polymers, Molecularweight and the determination,
,Molecularshape,Crystallinity,Glasstransitiontemperatureandmeltingpoint,Visco-
elasticity,polymerization mechanisms, s t r u c t u r e p r o p e r t y r e l a t i o n s h i p o f
thermoplastics, thermosets and elastomers with
e x a m p l e s ( PE,PVC,PMMA, Formaldehyde resins)., c h a r a c t e r i z a t i o n o f p o l y m e r i c
materials
Module3:WATERCHEMISTRY
8
Waterindifferentsector,waterqualityparameters,Hardnessofwater,Typesofhardness,Units,Determination
ofhardnessbyEDTAmethod,(includingNumericalproblems),SofteningmethodsandNumericalproblemsbas
edonthesemethods, Problems with Boiler feedwaterandits treatments, Testing of waste water (dissolved
oxygen, COD, BOD,toxic elements)

Module4:LUBRICANTS 4L
Typesoflubricants,Mechanismoflubrication,PhysicalandChemicalpropertiesoflubricants,A
dditivesof lubricants,Selectionof lubricants
Module5:ALLOYS 3L
Purposesofmakingalloys,TypesofAlloys:ferrousandnon-ferrous
alloys,Carbonsteel:Advantagesofaddingcarbon,Types,%composition,Alloysteel:Heatresist
antsteel,corrosionresistant steel,Non-ferrousalloys: AlloysofCu,Al andPb.
Module6:SURFACE CHEMISTRY AND CATALYSIS 3L
Classification of Adsorption, Langmuir's theory of adsorption, Characteristics of
colloidal solutions, Protective colloids, emulsions, gels. Types of catalysis
reactions, Theory of catalysis, Characteristics of catalytic reactions.
Text books

1) EngineeringChemistry - JainandJain,Danpatraipublications;16thedn(2013)
2) Engineering Chemistry - Dr.S.S.Dara, Dr.S.S. Umare, S.Chand& Company Ltd, 12 thed
3) A Text Book of Engineering Chemistry - ShashiChawla, Danpatrai publications ; 4 thedn;
(2010)
Reference Books: -
 1) Polymer Science - Billmayer, F. John Willey & Sons, N.Y.; 3 rdedn(1984)
2) Introduction to Material Science - William Callister, John Willey & Sons, N.Y.; 9th edn;
(2013)
3) Engg. Chemistry - NPTEL web- book, by T.L. Tembe, Kamaluddin and M.S.
Krishnan
4) Fundamentals of Molecular spectroscopy : C.N. Banwell

Course Name : F.Y. B. Tech. SEMESTER - I

Course Code : CH1011P

Subject Title : Engineering Chemistry-I Laboratory

Teaching and Examination Scheme:

Teaching Scheme Examination Scheme

L T P Credits
100 % CIE
- - 2 1

Course Outcome (CO) of Engineering Chemistry - I Laboratory

The students will be able to

1. Determine the quality of water suitable for different sectors.

2. Determine physical characteristics of lubricating oils.

 3. Find the purity and suitability of lubricating oils based on chemical characteristics.

4. Measure the fundamental properties such as viscosity, conductance of solutions.

Titleofthe Experiment[ A n y Ten]

1. Determination of Hardnessof Water ( Total, carbonate and non-carbonate hardness )
2. Determination of Chemical oxygen Demand (COD) of waste water sample
3. Determination of Chloride Content and alkalinity inWater
4. Methodofremovalofhardnessofwater usingionexchangecolumn
5. Saponification Valueof anOil
6. Acid valueofanOil
7. Viscosity& ViscosityIndexbyRedwoodViscometer
8. Flash PointbyAbel’s and Pensky - Marten's Apparatus
9. Characterization of polymer sample- hardness, Impact strength, tensile strength
10. Determination of Viscosity of using by Ford cup viscometer.
11. Determination of conductance of solution using conductometers
Text Books :-

1. Lab. Manual for Engineering Chemistry - Dr.S.K.Basin&Dr. S.K. Rani, DhanapatRai Publishing
Company; (2009)
2. Practical Manual for Chemistry of Engineering Materials - D.D. Shah, Nandu Publication,
Mumbai
3. Post Graduate Practical Chemistry - H.N. Patel, S.P. Turakhia, S.S. Kelkar, S.R. Puniyani,
Himalaya Publishing House, 5thedn; (2008)
4. A Manual of Practical Engineering chemistry Sudha Jain &ShradhaSinha , S.Chand Company Ltd
1st edn (2002)

Course Name : F.Y. B. Tech. SEMESTER - II

Course Code : CH1021T

Subject Title : Engineering Chemistry-II

Teaching and Examination Scheme:

Teaching Scheme Examination Scheme

ESE [W]
L T(tutorial) P TA (%) IST (%) ESE (%) Credits
Hrs

02 - 01 20 20 60 02 03

Course Outcome (CO) of Engineering Chemistry - II

The students will be able to
 1. Apply the concepts of electrochemistry and corrosion science to solve corrosion problems.

2. Classify the fossil fuels and determine the different physical and chemical parameters of
fuel.

3. Recognize scope of advanced materials such as nano materials, conducting polymers and
liquid crystalline polymers for Engineering applications.

4. Choose environmentally friendly technology for manufacturing & utility aspect of

materials using green chemistry principles and using the concept of sustainability.

5. Analyse the materials using spectroscopic and chromatographic techniques.

CourseContents: -
Module1: CORROSION 6L

Directchemicalcorrosion,Electrochemicalcorrosionandits reaction
mechanisms,Typesofelectrochemicalcorrosion,(differentialaeration,galvanic,concentrat
ioncell),ElectrochemicalcorrosionlikePitting,Inter
granular,Soil,Waterline.Factorsaffectingcorrosion,Protectionofcorrosion,
Applicationswithfewpracticalproblemsofcorrosion.

Module2:FUELS 8L
Typesoffuels,Calorificvalue,Determination ofCalorificvalue, Numericalproblemsbased
onit.Analysisofcoal,RefiningofPetroleum by fractional
distillation,FuelsforICengines,Knockingandantiknock agents,Octaneand
Cetanevalues,Effect of structure of hydrocarbon on knocking of fuels.

Module3: ADVANCEDMATERIALS 6L
Advancedpolymers: Conductingpolymers,Liquid crystalpolymers.
Composites:Basicsofcomposites,CompositionandCharacteristicpropertiesofcomposites
.TypesofComposites:Particle,Fiber,Reinforced,Structural,applications.
Nanomaterials:Introduction,Fullerenes,Carbonnanotubes,Nanowires,Electronicandme
chanicalproperties,Synthesisofnanomaterials,Applicationsofnanomaterials-
Catalysis,Electronics&Telecommunication,Medicines, Energysciences.

Module4: PRINCIPLES OF SUSTAINABLE AND GREEN CHEMISTRY 3L

Principles of Green Chemistry, Waste minimization and Atom Economy, Reduction of
Materials and Energy requirement, Significance, c o n c e p t o f s u s t a i n a b i l i t y ,
Industrialapplicationsofgreen chemistry.
Module5: SPECTROSCOPIC AND CHROMATOGRAPHIC TECHNIQUES 4L

FundamentalsofSpectroscopy, M o l e c u l a r s p e c t r o s c o p y , ApplicationsofUV-
visible,IRSpectroscopy,Atomicabsorptionspectroscopy,Flamephotometry,Principlesand
applicationsofchromatographictechniques.

Text books

1) EngineeringChemistry - JainandJain,Danpatraipublications;16thedn(2013)
2) Engineering Chemistry - Dr.S.S.Dara, Dr.S.S. Umare, S.Chand& Company Ltd, 12 thed
3) A Text Book of Engineering Chemistry - ShashiChawla, Danpatrai publications ; Third edn;
(2003)
Reference Books: -

1) Polymer Science - Billmayer, F. John Willey & Sons, N.Y.; 3 rdedn

(1984)
2) Introduction to Material Science - William Callister, John Willey & Sons, N.Y.; 9th edn;
(2013)
3) Nano: The essentials - T.Pradeep;McGraw-HillEducation,(2009)
Course Name : F.Y. B. Tech. SEMESTER - II

Course Code : CH1021P

Subject Title : Engineering Chemistry-II Laboratory

Teaching and Examination Scheme:

Teaching Scheme Examination Scheme

L T P Credits
100 % CIE
- - 2 1

Course Outcome (CO) of Engineering Chemistry - II Laboratory

The students will be able to

1. Estimate metal content from alloys by iodometric method.

2. Determine metal content from their alloys by complexometric method.

3. Analyse quality of solid and liquid fuels based on different tests.

4. Use chromatography and spectroscopy for qualitative analysis of materials.

5. Use conductometric method for quantitative analysis of materials.

Titleofthe Experiment[ AnyTen]

1) Determination ofIron bycolorimetricmethod.

2) To determineIron in theplaincarbonsteelsample.
3) To determineZincin thebrasssample by complexometric titration
4) To estimateNickelinthealloysteelsample.
5) Determine the percentage of available chlorine in bleaching powder .
6) AnalysisOf fuel:Proximateanalysisofthe givencoalsample
7) Determination ofthe percentageofNitrogen inthe givencoalsample.
8) Determination ofadulterationintransport fuels
9) Determination ofthe percentageofSulphurinthe givencoalsample.
10) DemonstrationOf TLC/Paperchromatography
11) Determine the concentration of a solution by Spectrophotometric method .
12) Determination of toxic elements by Flame photometry
Text Books :-
 1. Lab. Manual for Engineering Chemistry - Dr.S.K.Basin&Dr. S.K. Rani, DhanapatRai
Publishing Company; (2009)
2. Practical Manual for Chemistry of Engineering Materials - D.D. Shah, Nandu
Publication, Mumbai
3. Post Graduate Practical Chemistry - H.N. Patel, S.P. Turakhia, S.S. Kelkar, S.R.
Puniyani, Himalaya Publishing House, 5thedn; (2008)

Applied Mathematics – I
Programme Name : F.Y. B.Tech SEMESTER-I

Course Code : MA10011S

Course Title : Applied Mathematics – I

Teaching Scheme Examination Scheme Scheme of Evaluation

Lectures L Tutorial P ESE MST MS ESE TA MST ESE Credits

T
(Hrs/week Hrs Hrs
 )

(3+1) 03 01 00 03 1.5 40 100 20 20 60 04

Course Outcomes:
1) To develop logical thinking and understand the basic concepts of complex
numbers to find nth roots, expansion of trigonometric functions and hyperbolic
functions.
2) To study the different theorems related to differential calculus, expansion of
functionand the infinite series.
3) To understand the basic concepts of partial derivativesand its application to solve
engineering problems.
4) To understand basics of vector and matrices theory as applied to different areas
of linear algebra.

1. Module -I: Complex Numbers [12 Hrs]

Revision: Complex Numbers as ordered pairs, Argand’s diagram, Cartesian, Polar and
Exponential form of Complex Numbers, De’moivre’s Theorem and its
application to determine powers of complex numbers
1.1 Roots of complex numbers by De’moivre’s Theorem
1.2 Expansion of and in terms of powers of and .
1.3 Expansion of and in terms of sines and cosines of multiple of .
1.4 Hyperbolic Function: Exponential form, Circular function and relation between circular
and hyperbolic function, Inverse hyperbolic functions.
1.5 Separation of real and imaginary parts of complex numbers.
1.6 Logarithm of complex numbers

2. Module -II: Differential Calculus [11Hrs]

2.1 Successive Differentiation: nth derivative of Standard functions. Use of De’moivre’s
theorem.
2.2Lebnitz’s Theorem on nth derivative of product of two functions.
2.3Review of the continuity and differentiability of a function. Roll’s, Lagrange’s and
Cauchy’s Mean Value Theorems with geometric interpretation.
2.4 Infinite series. Tests for its convergence and divergence. Maclaurian’s series(without
proof) Expansion of standard function, Expansion of function in power series by using i)
Maclaurian’s series ii) Standard Series Method iii) Method of differentiation and
Integration Method iv) Method of Substitution.
2.5 Taylor’s Series (Without Proof) Expansion of function ( + ℎ) in power of and ℎ and
( ) in power of( − ).
0∞
2.6 Indeterminate forms: 0,∞, 0 ∞, ∞ − ∞, 1∞ , 0∞ , ∞0 by L’Hospital’s rule.

3. Module -III: Partial Differentiation [11Hrs]

3.1 Partial derivatives of first and higher order, total differential coefficient and total
derivative. Partial derivatives of Composite and Implicit functions, Change of
Independent variables.
 3.2 Euler’s theorem on homogeneous functions with two and three independent variables,
deduction from Euler’s theorem
3.3 Application of partial derivatives:
i) Error and Approximation
ii) Maxima and Minima of functions of two variables.
iii) Lagrange’s Method of undetermined multipliers.

4. Module -IV: Matrix and Vectors [08 Hrs]

Revision: Revision of basic matrix and vectors.
4.1 Rank of Matrix, definition, Normal form, and Echelon form.
4.2 Consistency and solution of simultaneous linear homogeneous and Non-
homogeneous
equations.
4.3Linear dependence and independence of vectors.
Text Books:
1. Applied Mathematics-I -G V Kumbhojkar, Jamnadas and Co--5th Edition,2009
2. Higher Engineering Mathematics - Dr. B S Grewal, Khanna Publication-39th Edition
2005
Reference Books:
1. Higher Engineering Mathematics -B V Ramana, Tata McGrawhill Pub Co. Ltd 1st
Edition,2007
2. Advance Engineering Mathematics - Erwin Kreyzig 9 th Edition
3. Applied Mathematics-I - Dr. U B Jungam, K P Patil& N Kumtekar –
NanduPublication 1998
4. A Textbook of Applied Mathematics - P N Wartikar& J N Wartikar– 2nd Edition,1997
5. Calculus and Analytical Geometry- G B Thomas & R L Finney, Narosa
Publication House, N. Delhi – 6th Edition.

Programme First Year Bachelor of Technology Semester II

Name

Course Code All Branches

Course Title Business English

Course Outcomes:
1. Acquire basic proficiency in English grammar and vocabulary.
2. Develop enhanced writing skills required for technical communication.
Programme Name B. Tech SEMESTER – I / II

Course Code EE1001T

Course Title Basics of Electrical Engineering

3. Analyze a given text critically for logical consistency and organizations.

Detailed contents :
1. Vocabulary Building
1.1 The concept of Word Formation 1.2 Root words from foreign languages and their use in
English 1.3 Acquaintance with prefixes and suffixes from foreign languages in English to form
derivatives1.4 Technical vocabulary specific to engineering fields.
2. Basic Writing Skills
2.1 (This unit involves interactive practice sessions in Language Lab) Sentence Structures 2.2
Use of phrases and clauses in sentences 2.3 Importance of proper punctuation 2.4 Creating
coherence 2.5 Organizing principles of paragraphs in documents
3. Identifying Common Errors in Writing
3.1 Subject-verb agreement 3.2 Noun-pronoun agreement 3.3 Misplaced modifiers 3.4 Articles
3.5 Prepositions
5. Writing Practices – Summarisation, email, business letters
6. Critical Reading – Reading a text with enhanced clarity and comprehension
Suggested Readings:
(i) Practical English Usage. Michael Swan. OUP. 1995.
(ii) Remedial English Grammar. F.T. Wood. Macmillan.2007
(iii) On Writing Well. William Zinsser. Harper Resource Book. 2001

Course Outcomes:
After completing the course, students will be able to
1. Apply knowledge of DC circuits for analysing network theorems.
2. Analyse single phase AC circuits.
3. Apply concepts of resonance, bandwidth in series and parallel AC circuits
4. Analyse three phase AC circuits.

Module Detailed Contents

01 DC Circuits(Only Independent Sources): Kirchhoff ’s laws, Ideal and practical voltage
and current source, Mesh and Nodal analysis, Supernode and Supermesh analysis,
Source transformation, Star-delta transformation, Superposition theorem, Thevenin’s
theorem, Norton’s theorem, Maximum power transfer theorem,

02 AC Circuits: Generation of alternating voltage and currents, RMS and Average value,
form factor, crest factor, AC applied to resistance, inductance and capacitance, R-L, R-C
and R-L-C series and parallel circuits, phasor diagrams, calculations of power and
power factor, series and parallel resonance, Q factor and bandwidth in AC circuits..
03 Three Phase Circuits: Three phase voltage and current generation, star and delta
connections(balanced load only), relationship between phase and line currents and
voltages, Phasor diagrams, Basic principle of wattmeter, measurement of power by one
and two wattmeter methods.

Books:

Text Books
1. V. N. Mittle and Arvind Mittal “Basic Electrical Engineering” Tata McGraw Hill, Second Edition,
2005
2. Vincent Del Toro, “Electrical Engineering Fundamentals", PHI Second Edition, 2011

Additional Reading
1. B.L.Theraja “A Textbook of Electrical Technology Volume-I”, S. Chand, 2008
2. Edward Hughes, “Electrical and Electrical Technology”, Pearson Education, Tenth Edition
3. D P Kothari and I J Nagrath “Theory and Problems of Basic Electrical Engineering”, PHI,
Thirteenth edition 2011.

Programme Name Bachelor of Technology Semester – I

Course Code CO0001T
Course Title Computer Programming & Problem Solving
Prerequisites NIL

Course Objectives
Upon completion of this course students will be able to
1. Understand the fundamental of computing & Object Oriented systems development.
2. Solve simple and moderately complex problems using C++.
3. Understand the implementation of various user-defined data types and its applications.

Course name Hr/week Credits (Examination Scheme

(Evaluation in% weightage)
L T P TA IST ESE TOTAL ESE
(W)
(HRS)
Computer Programming 3 0 - 3 20 20 60 100 3
and Problem Solving
Total 3 0 - 3

Course Outcomes:
Student will be able to:
1. Implement programs in C and C++
2. Write algorithm and flowchart for the specified problem.
3. Understand Object- Oriented modelling.
4. Use constructs like arrays, functions, pointers, structures and classes.
5. Apply inheritance, polymorphism, and work with files

Syllabus:

1. Principles of Object-Oriented Programming

Elements of computer systems, OS Commands & Linux environment, Language Processors,
Object-Oriented Programming Paradigm and benefits, Applications of OOP.

2. Object-Oriented Systems Development

Object-Oriented Analysis: static and dynamic modeling, and Design: class design and
algorithm design, case studies.

3. Beginning with C++

Tokens, Expressions, Control Structures, Array, Functions, Structures and Unions.

4. Class and Objects

Specifying a Class, Defining Member Functions, Private Member Functions, Static Data and
Member Functions, Arrays of Objects, Friend Functions.

5. Constructors and Destructors

Constructor, Parameterized Constructors, Multiple Constructors in a Class, Copy
Constructors, Dynamic Constructors, Destructors.

6. Inheritance
Single Inheritance, Multilevel Inheritance, Multiple Inheritance, Hierarchical Inheritance,
Hybrid Inheritance, Virtual Base Classes, Abstract Classes

7. Polymorphism
Operator Overloading, Function Overloading. Virtual Functions, Pure Virtual Functions.

8. Files
I/O stream operation, File Stream Operations, Opening and Closing a File, Detecting end-of-
file, more about Open(): File Modes, Sequential Input and Output operations.

Text Books:

1. “Object-Oriented paradigm with C++”, Dr. BanduMeshram, Shroff Publisher & Distributors
Pvt. Ltd, 2016.
2. “Object-Oriented Programming with C++”, E. Balagurusamy, 5th Edition, Published by Tata
McGraw Hill in year 2011.

Reference Books:

1. “Programming workbook for Object-Oriented paradigm with C++”, Dr. BanduMeshram,

Shroff Publisher & Distributors Pvt. Ltd, 2016.
2. “Mastering C++”, K. R. Venugopal, Rajkumar, 2nd Edition, Published by Tata McGraw Hill in
the year 1997.
Programme Name Bachelor of Technology Semester – I/II
Course Code CO0001P
Course Title Computer Programming & Problem Solving Lab
Prerequisites NIL

Course Objectives:
1. Understand fundamentals of programming such as variables, conditional and iterative
execution methods, etc.
2. Understand fundamentals of object-oriented programming in C++.
3. Have the ability to write an algorithm and develop computer program to solve specified
problems.
4. Be able to use the g++ compiler to create, debug and run simple C and C++ programs.

Course name Hr/week Credits (Examination Scheme

(Evaluation in% weightage)
L T P TA IST ESE TOTAL ESE
(W)
(HRS)
Computer Programming 0 0 2 1.5 100% CIE -
and Problem Solving Lab
Total 0 0 2 1.5

Course Outcomes:

The students would be able to

1. Apply and practice logical ability with help of algorithms and flowcharts to solve the
problems.
2. Understand C++ programming development environment, compiling, debugging, linking and
executing a program using the development environment.
3. Modularize the problems into small modules and then convert them into programs.
4. Understand
nderstand and apply the pointers, memory allocation techniques and use of files for
dealing with variety of problems.

Program List:

Sr Topics
No.
1. A. Write a C++ program to calculate total and percentage of marks, also decide grade
of student depending on the percentage using nested if-else
if else statement.
B. Write a C++ program for menu driven calculator using switch case Statement
2. A. Write a C++ program to find Maximum and minimum element from array.
B. Write a C++ program for multiplication of nXn matrix
mat
3. Write a C++ Program to reverse string and check whether it is palindrome or not.
4. A. Write a C++ program to swap numbers using call by value and call by reference.
B. Write a C++ program to calculate factorial of number using recursive function
function.
5. Write a C++ program to create class Student and display the information of n number
of student using array of objects.
6. Write a C++ program to explain concept of constructor and destructor
7. A. Write a C++ program to study concept of function overloading
B. Write a C++ program to adding 2 complex numbers using an overloaded operator.
8 A. Write a C++ program to study multilevel inheritance and implement following
hierarchy

B Write a C++ program to study Multiple Inheritance and implement following

hierarchy
9. Write a C++ program to study abstract class and virtual function.

Programme Name First Year Bachelor of Technology

Course Code SA 100IP
Course Title Engineering Mechanics lab

CO1: Perform experiments to verify the laws of static equilibrium including friction.
CO2 : Perform experiemtns to find out the unknown forces in plane and space trusses.
CO3 : Perform experiments to compute the frequency of vibration of dynamic SDOFs.
CO4 : Perform experiments to understand the applications of laws of kinematics and dynamics
equilibrium.
Title of the Experiment:

1. Bell Crank Lever

2. Simple Beam
3. Simple Jib Crane
4. Link Chain
5. Screw Jack (Friction)
6. Shear Leg Apparatus
7. ‘g’ by falling weight method
8. Plane motion of bodies
9. M.I. of fly wheel
10. Compound pendulum
11. Torsional pendulum
12. Principle of conservation of energy (connected bodies with flywheel)
13. Stiffness of spring
Programme Name First Year Bachelor of Technology Semester – I/II

Course Code SA 1001T

Course Title Engineering Mechanics

Course Outcomes:
1. Ability to understand &analyse basic theory and principle of forces in Mechanics and
their relationship to engineering applications.

2. To analyse motion, forces & motion, work & energy problems and their relationship to
engineering applications.

Course Contents:

1. Fundamental of Mechanics :
Review of basic concepts – mass, space, time and force: Particles and rigid bodies:
Scalars and vectors: Free, sliding, fixed and unit vectors: Addition, subtraction and
multiplication of two vectors. Definition of a force : Classification of forces : Principles of
transmissibility.

2. Force systems:
Introduction to different force systems: Composition of forces – triangle, parallelogram
and polygon law of forces, addition of two parallel forces: Resolution of forces: Moment
of a force, Varignon’s theorem: Couple of forces: Force – couple systems: Resultant of a
force system: Equilibrium conditions for a force system: Free body diagram: Different
types of supports.
 3. Distributed Forces :
Line, area and volume distributions of forces: Centre of gravity: Centre of mass: Centroid
of plane figures: Cerntroid of composite figures, Moment of Inertia: Area and mass
moments of inertia: Perpendicular and parallel axes theorems of moment of inertia:
Radius of gyration.

4. Plane Truss:
Statically determinate trusses: Force analysis of a truss – method of joints, method of
section and graphical method (Maxwell diagram).

5. Dry Friction:
Laws of dry friction, Co-efficient of friction: Angle and cone of friction: Angle of repose:
Applicatrions of friction-wedges and screw jacks. Coil Friction and its applications.

6. Virtual Work:
Work done by forces and couples: Virtual displacement and virtual work: Principle of
virtual work for equilibrium bodies in equilibrium: Active force diagram: Degree of
freedom.

7. Kinematics of Particles:
Differential equations of kinematics – plane, rectilinear and curvilinear motions:
Cartesian co-ordinate system: Normal and tangent co-ordinate system, projectile
motion.

8. Kinetics of Particles:
Newton’s second law of motion; Work and energy principle – gravitational-potential
energy, elastic-potential energy, kinetic energy, power, efficiency, Principle of impulse
and momentum; Impact motion – direct central impact.

9. Rotation of Rigid Bodies:

Kinematics of rotation; Kinetics of rotation – equation of motion, principle of work and
energy; Principle of impulse and momentum.

10. Plane Motion of Rigid Bodies:

Translaion of a rigid body in a plane; Kinematics of plane motion; Instantaneous centre
of rotation, Kinetics of plane motion – equation of motion, principles of work and
energy; Principle of impulse and momentum.

Text Books
1. A textbook of Engineering Mechanics, Dr.Sadhu Singh (S.Chand publishing)
2. Tayal A.K., Mechanics for Engineering, Statics and Dynamics, Umesh Publication, N.
Delhi, 2008.

3. Engineering Mechanics, K.L.Kumar, Veenu Kumar, McGow Higher Education.

Additional Reading

1. Bhavikatti S.S. &Rajashekarappa K.G. Engineering Mechanics, New Age International (P)
Limited publishers 1998.
 2. Shames I.H, Engineering Mechanics, P.H.I. India 1980.
3. Kumar K. L., Engineering Mechanics, McGraw Hill publishing company New Delhi 2008.
4. Beer and Johnston, Mechanics for Engineers, McGraw Hill, 2009.
5. Timoshenko and Young, Mechanics for Engineers, McGraw Hill, 2010.
6. Mclean and Nelson, Mechanics for Engineers, Schaum Outline Series 2010.
7. Hibbeler R.C., Mechanics for Engineers, Pearson Education, 2012.
8. Singer, Mechanics for Engineers, McGraw Hill, 2013

Programme Name First Year Bachelor of Technology Semester – I/II

Course Code
Course Title Engineering Graphics

Course Outcomes
The student should be able to –
1. Represent projections of lines, planes and solids.
2. Draw projections of solids cut by section planes and develop the lateral surfaces.
3. Convert the pictorial view into orthographic projections.
4. Convert the orthographic projections into isometric view.

Course Contents

Introduction to Drawing & Geometrical Contraction

Introduction: Introduction and importance of engineering drawing, Drawing Instruments and
their use, Drawing layout, types of lines, lettering and Dimensioning
Geometrical Constructions: Dividing a straight line into number of equal parts,
tangents to lines and arcs, construction of polygons.
Engineering Curves: conic section – ellipse, parabola and hyperbola & Rectangular hyperbola
(General method only); Cycloidal curves – Cycloid, Epicycloid, and Hypocycloid; Involutes
Projection of Points. Lines and Planes
Introduction: Method of projections, Orthographic projection, Reference planes, Quadrants,
Reference line etc. Projection of Points.
Projections of lines: Line inclined to both the reference planes (excluding the traces),
True/Apparent lengths & inclinations.
Projection of Planes: Triangular, Square, Rectangular, Pentagonal, Hexagonal and Circular
planes inclined to either HP or VP only (excluding composite planes).
Projection Solids, Sections of Solids and Development of Surfaces
Projections of Solids: Solids (Prism, Pyramid, Cylinder, Tetrahedron, Hexahedron and cone only
with their axis inclined to HP or VP only (Excluding Spheres, Composite and Hollow solids) Use
change of position or Auxiliary Plane method.
Section of Solids: Section of Prism, Pyramid, Cylinder, Tetrahedron, Hexahedron & cone cut by
plane. Use change of Position or Auxiliary plane method.
Development of Lateral Surfaces of sectioned solids: Lateral surface development of Prism,
Pyramid, Tetrahedron, Hexahedron, Cylinder, and Cone with Section Plane inclined to HP or VP
only (Excluding Reverse Development).
Orthographic Projections
Multi View Orthographic projections of simple machine parts by first angle method, Sectional
views of simple machine parts (full & Half Section only)

Isomeric Projection
Isomeric scale, isometric view/Drawing of simple blocks with plain and cylindrical surfaces.
(excluding spherical surface)

Note: Only FIRST ANGLE Method of projections must be used throughout the course.

Text books
1. N. D. Bhatt, Engineering Drawing, Charotar publishing house, 53rd Edition, 2014
2. N. H. Dubey, Engineering Drawing Nandu Publishers & printers, 15th Edition, 2015

Programme Name First Year Bachelor of Technology Semester – I/II

Course Code
Course Title Engineering Graphics Laboratory

Course Outcomes
The student should be able to –
1. Draft various Geometrical Elements used in Engineering Practice using CAD software.
2. Draft projections of various objects and their representation and dimensioning using CAD
software.
3. Visualize any object through Isometric Projections and interpret drawings of engineering
parts and objects.

Course Contents

Introduction to Computer Aided sketching

Computer screen, layout of the software, standard tool bar/menus and description of most
commonly used tools bars, navigational tools. Co-ordinate system and reference
planes.Definitions of HP, VP.Creation of 2D/3D environment.Selection of drawing size and scale.
Commands and creation of co-ordinate points, lines, axes, polylines, square, rectangle, polygons,
splines, circles, ellipse, text, move, copy, offset, mirror, rotate, trim, extend, break, chamfer, fillet,
curves, constraints viz. tangency, parallelism, inclination and perpendicularity. Dimensioning,
line conventions material conventions and lettering

Minimum 10 Exercises based on above mentioned topics with minimum two problems in
each Exercise.
Programme Name First Year Bachelor of Technology Semester – I/II
Course Code
Course Title Elements of Mechanical Engineering

Course outcomes
The student should be able to –
1. Understand basic aspects of heat transfer & fluid flow and related equipments.
2. Study aspects of energy engineering and energy conversion equipments.
3. Understand various metal cutting & joining processes required for manufacturing.
4. Identify the applications of mechanical drives and components.

Course Contents

Introduction to Thermal & Fluid Engineering

Heat Transfer: Modes, Equipment
Fluids: Types of flows, Types of Pumps, Compressors, Hydraulic Turbines (Hydro Power Plants)
(Simple problems to be solved.)
Introduction to Energy Engineering
Energy Generation: Steam Turbines, Gas Turbines, I.C. Engines (elementary treatment and
simple problems)
Conventional & Nonconventional Energy Sources: Comparison
Refrigeration and Air conditioning: (elementary treatment and simple problems)
Introduction to Manufacturing Engineering
Metal cutting processes & Machines: Turning, drilling, shaping, grinding operations,
Introduction to NC / CNC machines.
Metal joining processes: Welding, Soldering, Brazing, Riveting & their applications.
Manufacturing materials: Types & Selection
(Simple problems to be solved.)
Mechanical Drives & Devices
Drives: Belt, rope, chain, gear drives
Power transmission system: Shafts, axles, keys, couplings, bearings, friction clutches & brakes.
(Simple problems to be solved.)

Text Books
1. R. K. Rajput, Basic Mechanical Engineering, 3rd Edition, 2015
2. V. M. Domkundwar, A.T., Basic Mechanical Engineering, NiraliPrakashan, 2014
3. T.S.Rajan, Basic Mechanical Engineering,New Age International (P) ltd. Publishers, 4th
Edition, 2015
4. D. K. Chavan, G.K.Pathak, Basic Mechanical Engineering, 1st Edition, 2016

Programme Name First Year Bachelor of Technology Semester – I/II

Course Code
Course Title Workshop

COURSE OUTCOMES
The student should be able to –
1. Fabricate components with their own hands.
2. Get practical knowledge of the dimensional accuracies and dimensional tolerances possible
with different manufacturing processes.
3. Inculcate respect for physical work and hard labor.
4. Hands on experience on various manufacturing processes.

Course Contents

Fitting
Use and setting of fitting tools for chipping, cutting, filing, marking, center punching, drilling,
tapping. One job involving following operations: filing to size, one simple male female joint,
drilling and tapping.
Carpentry
Use and setting of hand tools like hacksaws, jack planes, chisels and gauges for construction of
various joints, wood tuning and modern wood turning methods. One carpentry job involving a
joint and report.
Forging (Smithy)
At least one smithy job (Lifting hook and handle)
Welding
Edge preparation for welding jobs.Arc welding for different job like, Lap welding of two plates,
butt welding of plates with simple cover, arc welding to join plates at right angles.
One welding job is to be completed using any one welding processes.
Machine Shop
One machine/turning job is to be completed.
Sheet metal working
Use of sheet metal, working hand tools, cutting, bending. One sheet metal job is to be completed.

Text Books
1. Chapman W. A. J., Workshop Technology Parts 1 & 2, Viva Books P. Ltd., New Delhi, 4th Edition,
1998.
2. Welding Handbook. 8th Edition. 3 vols& 7th Edition. 5 vols, Miami, American Welding Society,
1987 & 1976 respectively.
3. Metals Handbook. 9th Edition, Vol 6, Welding, Brazing & Soldering. Metals Park, Ohio, American
Society of Metals, 1983.
4. SeropeKalpakjian Manufacturing Engineering & technology Pearson Steven R. Schmid Education
(Asia) Inc., Delhi, 2002