Scribd
Upload
69 views6 pages

LCD

This document includes header files and defines functions for initializing an LCD display and the microcontroller's ports. It initializes the oscillator and ports, initializes the LCD, displays two constant strings on separate lines, and enters an infinite loop. It includes functions for initializing the LCD, sending commands and data, displaying a string at a given row, and delaying in milliseconds.

Uploaded by

Sourav Debnath
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
69 views6 pages

LCD

This document includes header files and defines functions for initializing an LCD display and the microcontroller's ports. It initializes the oscillator and ports, initializes the LCD, displays two constant strings on separate lines, and enters an infinite loop. It includes functions for initializing the LCD, sending commands and data, displaying a string at a given row, and delaying in milliseconds.

Uploaded by

Sourav Debnath
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

//-----------------------------------------------------------------------------

// Includes

//-----------------------------------------------------------------------------

#include <SI_C8051F340_Register_Enums.h> // SFR declarations

SI_SBIT(RS, SFR_P1, 0);

SI_SBIT(RW, SFR_P1, 1);

SI_SBIT(EN, SFR_P1, 2);

void OSCILLATOR_Init(void);

void PORT_Init(void);

void lcd_init(void);

void lcd_cmd(unsigned char);

void lcd_dat(unsigned char);

void lcd_dis(unsigned int, const unsigned char);

void enable(void);

void delayms(unsigned int);

const unsigned char* Line1 = " Logsun Systems\0";

const unsigned char* Line2 = " 16x2 LCD\0";

//-----------------------------------------------------------------------------

// SiLabs_Startup() Routine

// ----------------------------------------------------------------------------

// This function is called immediately after reset, before the initialization

// code is run in SILABS_STARTUP.A51 (which runs before main() ). This is a

// useful place to disable the watchdog timer, which is enable by default

// and may trigger before main() in some instances.


//-----------------------------------------------------------------------------

void SiLabs_Startup (void)

// Disable the watchdog here

PCA0MD &= ~0x40; //Disable Watchdog timer.

//-----------------------------------------------------------------------------

// main() Routine

// ----------------------------------------------------------------------------

// Note: the software watchdog timer is not disabled by default in this

// example, so a long-running program will reset periodically unless

// the timer is disabled or your program periodically writes to it.

//

// Review the "Watchdog Timer" section under the part family's datasheet

// for details. To find the datasheet, select your part in the

// Simplicity Launcher and click on "Data Sheet".

//-----------------------------------------------------------------------------

int main (void)

int l =0;

PORT_Init();

OSCILLATOR_Init();

lcd_init();

//(1,"A");

// lcd_dis(2,"*");

while(Line1[l]!='\0')
{

lcd_dat(Line1[l]);

l++;

delayms(50);

l=0;

lcd_cmd(0xC0);

delayms(10);

while(Line2[l]!='\0')

lcd_dat(Line2[l]);

l++;

delayms(50);

// lcd_dis(1,Line1);

//lcd_dis(2,Line2);

while (1) {} // Spin forever

void OSCILLATOR_Init(void){

OSCICN |= 0x03;

}
void PORT_Init(void){

P0MDIN |= 0xFF;

P1MDIN |= 0x07;

P0MDOUT = 0xFF;

P1MDOUT = 0x07;

XBR1 = 0x40;

void delayms(unsigned int time)

int s,t;

for(s=0;s<time;s++){

for(t=0;t<45;t++);

void enable(void){

EN = 1;

delayms(5);

EN = 0;

void lcd_cmd(unsigned char cmd){


P0 = cmd;

RW = 0;

RS = 0;

enable();

void lcd_dat(unsigned char datA)

P0 = datA;

RW =0;

RS =1;

enable();

void lcd_init()

lcd_cmd(0x38); //2 lines 5x7 matrix

delayms(10);

lcd_cmd(0x0F); // LCD ON, Cursor Blink

delayms(10);

lcd_cmd(0x01); // Clear Screen

delayms(10);

lcd_cmd(0x01);

delayms(10);

lcd_cmd(0x80); // Force Cursur to begining of 1st line

void lcd_dis(unsigned int row, const unsigned char* string)

{
unsigned int ptr = 0;

if(row==1){

lcd_cmd(0x80);

else

lcd_cmd(0xC0);

while(string[ptr]!= '\0')

lcd_dat(string[ptr]);

ptr++;

delayms(50);

You might also like