Scribd Logo
Upload

Welcome to Scribd!

  • 49 views

    10.0.3 - Smoke Detector

    Uploaded by

    Gopinath Sekar
    1) The AS2011 photoelectric smoke sensor uses light scattering technology to detect smoke particles. It has a light emitting diode and photodiode arrangement inside a detection chamber. 2) When smoke enters the chamber, it scatters the light causing more light to hit the photodiode. If smoke density exceeds a threshold, an interrupt is transmitted to the fire alarm panel. 3) The sensor has features like automatic contamination compensation, built-in fire test, and vandal resistance locking. It can detect optically dense smoke from smoldering or flaming fires.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    10.0.3 - Smoke Detector

    Uploaded by

    Gopinath Sekar
    49 views2 pages
    1) The AS2011 photoelectric smoke sensor uses light scattering technology to detect smoke particles. It has a light emitting diode and photodiode arrangement inside a detection chamber. 2) When smoke enters the chamber, it scatters the light causing more light to hit the photodiode. If smoke density exceeds a threshold, an interrupt is transmitted to the fire alarm panel. 3) The sensor has features like automatic contamination compensation, built-in fire test, and vandal resistance locking. It can detect optically dense smoke from smoldering or flaming fires.

    Original Title

    10.0.3 -Smoke detector

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) The AS2011 photoelectric smoke sensor uses light scattering technology to detect smoke particles. It has a light emitting diode and photodiode arrangement inside a detection chamber. 2) When smoke enters the chamber, it scatters the light causing more light to hit the photodiode. If smoke density exceeds a threshold, an interrupt is transmitted to the fire alarm panel. 3) The sensor has features like automatic contamination compensation, built-in fire test, and vandal resistance locking. It can detect optically dense smoke from smoldering or flaming fires.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    49 views2 pages

    10.0.3 - Smoke Detector

    Uploaded by

    Gopinath Sekar
    1) The AS2011 photoelectric smoke sensor uses light scattering technology to detect smoke particles. It has a light emitting diode and photodiode arrangement inside a detection chamber. 2) When smoke enters the chamber, it scatters the light causing more light to hit the photodiode. If smoke density exceeds a threshold, an interrupt is transmitted to the fire alarm panel. 3) The sensor has features like automatic contamination compensation, built-in fire test, and vandal resistance locking. It can detect optically dense smoke from smoldering or flaming fires.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    AS2011-00

    Photoelectric Smoke Sensor

    Standard Features Operation


    • Low Profile - Only 2.0” high, including The detection chamber consists of a light-
    base emitting diode (LED) and photodiode
    arrangement. The chamber is designed such
    • Simple and reliable device addressing
    that light emitted by the LED cannot
    • Automatic compensation for sensor normally reach the photodiode. In the event
    contamination of fire, particles of smoke enter the chamber
    and scatter the light. As the smoke level
    • Built-in fire test feature increases, the scattering effect increases,
    • Uses the noise-immune Digital causing more light to hit the photodiode.
    Communication Protocol (DCP), which The chamber contains a unique baffle design
    utilizes interrupts for fast response to which allows smoke to enter the chamber
    fires while preventing external light from
    affecting the photodiode. The photodiode
    • Two built-in power/alarm LEDs input level is sampled to sense smoke
    density.
    • Programmable non-polling LEDs
    When the smoke density exceeds a preset
    • Non-directional smoke chamber
    threshold the sensor transmits an interrupt
    • Vandal resistant security locking feature to the fire control panel indicating a fire
    condition. The fire alarm control panel can
    • Removable smoke labyrinth for cleaning adjust the sensor threshold to compensate
    or replacement for contamination.
    Note: Up to 127 devices are permitted on each SLC
    loop. A sensor address is set by a hand-held
    Bases are not included Application programming unit. The sensor mounts to an
    electronics-free base and incorporates a
    with detectors, please The AS2011 Photoelectric Smoke Sensor is locking mechanism for secure installation.
    particularly suited to detecting optically dense The base provides mounting slots, terminals
    order separately. smoke typical of fires involving materials such for field wiring and a third contact for a
    as soft furnishings, plastic, foam or other remote indicator / LED. The sensor
    similar materials which tend to smolder and incorporates dual LEDs for easy viewing of
    produce large visible smoke particles. sensor status
    Avenger’s unique design allows fast response
    to flaming fires as well as smoldering fires
    while preventing false alarms.

    Fire Detection System by Avenger, Las Vegas, Nevada 89141 U.S.A. I Phone: 1-702-513-4654
    [email protected] I www.avengersystems.com
    VERSION 3.01 - 2017/09
    Engineering Specification
    The contractor shall furnish and install where indicated on
    Technical Specifications
    the plans, photoelectric sensors AS2011 The combination Operating Voltage: 17-41 VDC
    sensor head and twist lock base shall be UL listed compatible Standby Current: 450μA
    with a UL listed fire alarm control panel. Alarm Current: 540μA
    The Sensor and Base shall be UL listed as compatible with the Transmission Method: DCP—Digital Communication Protocol
    fire alarm control panel (FACP). The base shall permit direct
    Maximum Humidity: 95% RH Non-Condensing
    interchange with the Avenger AS2011 photoelectric smoke
    sensor, AS2010 heat sensor, and the AS2012 Multi-Criteria UL Temperature Range: 32º F to 115º F
    sensor. Operating Temperature Range: 14º F to 122º F
    The sensitivity of the sensor shall be capable of being Sensitivity Range: 0.7 - 4.0%/ FT @ 300 FPM
    measured by the control panel. 0.7 - 3.86%/ FT @ 2000 FPM 0.7
    2.65%/ FT @ 4000 FPM
    The vandal-resistant, security locking feature shall be used in
    Air Velocity Range: 0-4000 fpm
    those areas as indicated on the drawing. The locking feature
    shall be optional and can be implemented when required. Color & Case Material: Bone/ White - ABS Blend
    Weight: 3.4 oz, (5.1 oz with 4” base)

    Bases
    The AS7001 and the AS7002 mounting bases are electronics
    free and are a simple rugged design with screw terminals for
    Ordering Codes
    wiring connections. A common mounting base allows sensor Part Number Description
    interchange and maintains loop continuity when sensors are AS2011-00 Photoelectric Smoke Detector
    removed. A simple anti-tamper head locking system is
    provided which is enabled by removing a small plastic tab on AS7001-00 4” Mounting Base
    the back of the sensor. Once locked, the head can be AS7002-00 6” Mounting Base
    removed using a small diameter screw driver. AS7008-00 6” Sounder Base

    Fire Detection System by Avenger, Las Vegas, Nevada 89141 U.S.A. I Phone: 1-702-513-4654
    [email protected] I www.avengersystems.com
    VERSION 3.01 - 2017/09

    You might also like