Scribd
Upload
123 views1 page

As7001 00 As7002 00

The document describes Avenger System sensor bases AS7001 and AS7002. The AS7001 is a 4" sensor base and the AS7002 is a 6" sensor base. Both bases are designed to be used with Avenger analog sensors and connect to a Supreme Signaling Line Circuit. The bases allow for easy replacement of sensors without disturbing wiring and contain screw terminals for connections.

Uploaded by

Gopinath Sekar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
123 views1 page

As7001 00 As7002 00

The document describes Avenger System sensor bases AS7001 and AS7002. The AS7001 is a 4" sensor base and the AS7002 is a 6" sensor base. Both bases are designed to be used with Avenger analog sensors and connect to a Supreme Signaling Line Circuit. The bases allow for easy replacement of sensors without disturbing wiring and contain screw terminals for connections.

Uploaded by

Gopinath Sekar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AS7001-00 AS7002-00

4” Sensor Base 6” Sensor Base

Standard Features Operation


• UL Listed The AS7001 4” base and AS7002 6” base is
designed specifically for use with the Avenger
• Designed for use with all NS analog
sensors Analog sensors, models AS2010 Heat Sensor,
AS2011 Photoelectric Smoke Sensor and AS2012
• Available in 4 and 6 inch models Multi Criteria Heat Sensor.
• Contains a security locking tab for
The AS7001 and AS7002 common mounting
tamper protection
bases allows for complete compatibility for all of
AS7001-00 the Avenger System Analog sensors.

Application The bases are lightweight and very thin, providing


a low profile once installed. The solder-less screw
The AS7001 4” base and AS7002 6” base is terminals enable quick and easy wiring
designed for use with Avenger System style connections.
sensors models AS2010, AS2011 and
AS2012. Engineering
Each base is connected to a Supreme
Signaling Line Circuit (SLC) and provides Specifications
easy replacement of sensors, without
The Dealer shall furnish and install where
disturbing the wiring.
indicated on the plans, Avenger System AS2011
The bases are electronics free and contain a photoelectric sensors, AS2010 Heat Sensor or
simple rugged design with screw terminals AS2012 Multi-criteria Sensor part number.
for wiring connections. A common
AS7002-00 The selected sensor shall be attached to the
mounting base allows sensor interchange
AS7001 or AS7002 base and permit direct
and maintains loop continuity when
interchange between the listed sensors.
sensors are removed. A simple anti-tamper
head Locking system is provided which is The vandal-resistant, security locking feature shall
enabled by removing a small plastic tab on be used in those areas as indicated on the
the back of the sensor. Once locked, the drawing. The locking feature shall be optional and
head can only be removed using a small can be implemented when required.
diameter screw driver.
It shall be possible to perform a functional test of
the sensor without the need of generating smoke.
The test method shall simulate the effects of
products of combustion in the chamber to ensure
testing of internal circuitry.
Technical Specifications NOTE: SLC maximum resistance is 50 ohms.
AS7001: 4” Sensor Base
AS7002: 6” Sensor Base
Security feature: Plastic Tamper-Lock
Color & Case Material: Bone PC / ABS Blend
Compatible Sensors: AS2010, AS2011, AS2012

Fire Detection System by Avenger, Las Vegas, Nevada 89141 U.S.A. I Phone: 1-702-513-4654
[email protected] I www.avengersystems.com
VERSION 3.01 - 2017/09

You might also like