Scribd
Upload
72 views2 pages

Installation Manual EM-103: I. Accessory Parts II. Installation Procedures

This 3-sentence summary provides the key steps for installing an expanded memory unit on various Applied Machines printer models: 1) Turn off the printer and unplug it, remove the rear cover, and insert the expanded memory unit into the slot on the motherboard. 2) Reinstall the rear cover and turn the printer back on. 3) Enter the service mode to confirm that the memory volume has correctly increased after installation.

Uploaded by

Андрей Крупкин
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
72 views2 pages

Installation Manual EM-103: I. Accessory Parts II. Installation Procedures

This 3-sentence summary provides the key steps for installing an expanded memory unit on various Applied Machines printer models: 1) Turn off the printer and unplug it, remove the rear cover, and insert the expanded memory unit into the slot on the motherboard. 2) Reinstall the rear cover and turn the printer back on. 3) Enter the service mode to confirm that the memory volume has correctly increased after installation.

Uploaded by

Андрей Крупкин
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

EM-103 Expanded Memory Unit

INSTALLATION MANUAL
Applied Machines: 163/181/211/220
MFP: 16 ppm/18 ppm/21 ppm/22 ppm
for Product Code: A08E/A09A

I. Accessory parts II. Installation procedures


No. Name Shape Q’ty 1. Turn off the machine and unplug the power cord
from the machine.
1. Expanded 2. Remove the rear cover (nine screws).
memory unit
1

1383U002AC

2. Installation
manual
1
set

4980IXC019DA

Note: A0A6IXC001DA

If the network interface card is setup at the same


time, first install the expanded memory unit. 3. Insert the expanded memory unit into the slot
(CN105) on the board.
Note:
• Do not touch the electric connection edge of the
memory board.
After unpacking, be sure to get rid of the
• Confirm the mounting direction (notch) of the
packaging materials and keep them out of
add-on memory board all the way until a click is
the reach of children.
heard.
Putting the head in the plastic bag
involves danger of suffocation.

A0CJIXC079DA

A0CJIXC080DA

34364C026H019 A0CJ-9553-00
E-1
4. Reinstall the rear cover (nine screws) 4. Press the OK key.
Note:
Use the screw with washer to the position indi-
cated by the arrow.

A0CJIXE043DA

5. Press the ▼ key four times.


A0A6IXC001DA

III. Confirmation of the memory volume


The following illustration shows the ▼ key, ▲ key,
and OK key used in the following procedures.

A0CJIXE044DA

6. Press the OK key.

A08EIXC076DA

1. Plug the power cord into the machine and turn on


the machine.
2. Call the SERVICE MODE to the screen.
(See the service manual for how to call the SER-
VICE MODE to the screen.)
3. Press the ▼ key three times.
A0CJIXE045DA

7. Make sure that the volume of memory was


increased. (Standard: 32MB)

A08EIXE071DA

A0CJIXE046DB

E-2

You might also like