Scribd
Upload
58 views5 pages

Log

The document contains log messages from software running disk operations on two disks, Disk0 and Disk1. It initializes the disks, creates and formats partitions on Disk1, and then deletes one of the partitions. The operations include copying drivers, initializing and reading disk information, creating and formatting partitions, and deleting a partition. Errors were encountered initializing a driver and writing the MBR partition table for Disk1.

Uploaded by

Poer Sin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
58 views5 pages

Log

The document contains log messages from software running disk operations on two disks, Disk0 and Disk1. It initializes the disks, creates and formats partitions on Disk1, and then deletes one of the partitions. The operations include copying drivers, initializing and reading disk information, creating and formatting partitions, and deleting a partition. Errors were encountered initializing a driver and writing the MBR partition table for Disk1.

Uploaded by

Poer Sin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 5

===================================================================================

==
2022-01-04 13:50:35:853 =>
[ main.cpp, 00147] => OS
MajorVer:10 MiniorVer:0 ServicePack:0
2022-01-04 13:50:35:853 =>
[ main.cpp, 00148] => System is
server:No
2022-01-04 13:50:35:853 =>
[ main.cpp, 00149] => Software
is 64 bit:Yes
2022-01-04 13:50:35:853 =>
[ idriver.cpp, 00613] => Copying 64
bit driver.
2022-01-04 13:50:35:935 =>
[ idriver.cpp, 00613] => Copying 64
bit driver.
2022-01-04 13:50:35:938 =>
[ idriver.cpp, 00378] =>
OpenService failed! Error = 1060

2022-01-04 13:50:35:939 =>


[ idriver.cpp, 00700] => Failed to
call ManageDriver(DRIVER_FUNC_START)
2022-01-04 13:50:35:939 =>
[ idriver.cpp, 00455] =>
OpenService failed! Error = 1060

2022-01-04 13:50:35:940 =>


[ idriver.cpp, 00311] =>
OpenService failed! Error = 1060

2022-01-04 13:50:36:199 =>


[ kdpifontstylesetting.cpp, 00114] => SCREEN-
WIDTH:1366 SCREEN-HEIGHT:768
2022-01-04 13:50:36:199 =>
[ kdpifontstylesetting.cpp, 00117] => SCREEN-
WIDTH:1366 SCREEN-HEIGHT:705
2022-01-04 13:50:37:960 =>
[ main.cpp, 00904] =>
rcScreen.width=1366, rcScreen.height=768
2022-01-04 13:50:38:042 =>
[ kvolumemanager.cpp, 00227] => Disk0, V-
GEN10SM21SCY1024HY SATA, CHS:124519,255,63, total sectors: 2000409264, bytes per
sector = 512
2022-01-04 13:50:38:233 =>
[ kvolumemanager.cpp, 00248] => Disk0 set
alignmentFactor =AlignToMB
2022-01-04 13:50:39:975 =>
[ dynamicdisk.cpp, 00215] => Disk0 is
not a dynamic disk.
2022-01-04 13:51:04:027 =>
[ kvolumemanager.cpp, 00227] => Disk0, V-
GEN10SM21SCY1024HY SATA, CHS:124519,255,63, total sectors: 2000409264, bytes per
sector = 512
2022-01-04 13:51:04:178 =>
[ kvolumemanager.cpp, 00248] => Disk0 set
alignmentFactor =AlignToMB
2022-01-04 13:51:04:181 =>
[ kvolumemanager.cpp, 00227] => Disk1, WD
Elements USB, CHS:60801,255,63, total sectors: 976773168, bytes per sector = 512
2022-01-04 13:51:04:267 =>
[ kvolumemanager.cpp, 00248] => Disk1 set
alignmentFactor =AlignToMB
2022-01-04 13:51:05:153 =>
[ dynamicdisk.cpp, 00215] => Disk0 is
not a dynamic disk.
2022-01-04 13:51:05:153 =>
[ dynamicdisk.cpp, 00215] => Disk1 is
not a dynamic disk.
2022-01-04 13:51:33:251 =>
[ kbatchcommandexecutive.cpp, 01415] =>
InitiateDisk DiskIndex:1 Style:0 ForceReboot:0 NoReservedGptPart:1
2022-01-04 13:51:35:053 =>
[ kdisk.cpp, 01315] => Failed to
write MBR partition table. error = 50
2022-01-04 13:51:35:054 =>
[ kbatchcommandexecutive.cpp, 01415] =>
CreatePartition DiskIndex:1 StartingOffset:2048 PartitionLength:1083392
PartTypeId:2147483655 FsType:0 ClusterSize:0 Label:"" Letter:0 Active:0 Primary:1
BootVolume:0 SystemVolume:0 GptPartitionType:0
2022-01-04 13:51:35:576 =>
[ kbatchcommandexecutive.cpp, 01415] =>
CreatePartition DiskIndex:1 StartingOffset:1085440 PartitionLength:204800
PartTypeId:2147483655 FsType:0 ClusterSize:0 Label:"" Letter:0 Active:1 Primary:1
BootVolume:0 SystemVolume:0 GptPartitionType:0
2022-01-04 13:51:36:099 =>
[ kbatchcommandexecutive.cpp, 01415] =>
CreatePartition DiskIndex:1 StartingOffset:361293824 PartitionLength:1075200
PartTypeId:2147483655 FsType:0 ClusterSize:0 Label:"" Letter:0 Active:0 Primary:1
BootVolume:0 SystemVolume:0 GptPartitionType:0
2022-01-04 13:51:36:680 =>
[ kvolumemanager.cpp, 00227] => Disk0, V-
GEN10SM21SCY1024HY SATA, CHS:124519,255,63, total sectors: 2000409264, bytes per
sector = 512
2022-01-04 13:51:36:827 =>
[ kvolumemanager.cpp, 00248] => Disk0 set
alignmentFactor =AlignToMB
2022-01-04 13:51:36:828 =>
[ kvolumemanager.cpp, 00227] => Disk1, WD
Elements USB, CHS:60801,255,63, total sectors: 976773168, bytes per sector = 512
2022-01-04 13:51:36:854 =>
[ kvolumemanager.cpp, 00248] => Disk1 set
alignmentFactor =AlignToMB
2022-01-04 13:51:37:867 =>
[ dynamicdisk.cpp, 00215] => Disk0 is
not a dynamic disk.
2022-01-04 13:51:37:867 =>
[ dynamicdisk.cpp, 00215] => Disk1 is
not a dynamic disk.
2022-01-04 13:52:53:471 =>
[ kbatchcommandexecutive.cpp, 01415] =>
FormatPartition DiskIndex:1 PartitionIndex:1 FsType:7 ClusterSize:2
Label:"Recovery"
2022-01-04 13:52:53:474 =>
[ kvolume.cpp, 00506] => Locking
volume...
2022-01-04 13:52:53:475 =>
[ kvolume.cpp, 00511] => Succeed to
lock volume.
2022-01-04 13:52:53:475 =>
[ kvolume.cpp, 00526] =>
Dismounting volume...
2022-01-04 13:52:53:476 =>
[ kvolume.cpp, 00531] => Succeed to
dismount volume.
2022-01-04 13:52:55:400 =>
[ kbatchcommandexecutive.cpp, 01415] =>
FormatPartition DiskIndex:1 PartitionIndex:2 FsType:7 ClusterSize:1 Label:""
2022-01-04 13:52:55:402 =>
[ kvolume.cpp, 00506] => Locking
volume...
2022-01-04 13:52:55:404 =>
[ kvolume.cpp, 00511] => Succeed to
lock volume.
2022-01-04 13:52:55:404 =>
[ kvolume.cpp, 00526] =>
Dismounting volume...
2022-01-04 13:52:55:405 =>
[ kvolume.cpp, 00531] => Succeed to
dismount volume.
2022-01-04 13:52:55:650 =>
[ kbatchcommandexecutive.cpp, 01415] =>
FormatPartition DiskIndex:1 PartitionIndex:3 FsType:7 ClusterSize:2 Label:""
2022-01-04 13:52:55:652 =>
[ kvolume.cpp, 00506] => Locking
volume...
2022-01-04 13:52:55:654 =>
[ kvolume.cpp, 00511] => Succeed to
lock volume.
2022-01-04 13:52:55:654 =>
[ kvolume.cpp, 00526] =>
Dismounting volume...
2022-01-04 13:52:55:655 =>
[ kvolume.cpp, 00531] => Succeed to
dismount volume.
2022-01-04 13:52:56:117 =>
[ kvolumemanager.cpp, 00227] => Disk0, V-
GEN10SM21SCY1024HY SATA, CHS:124519,255,63, total sectors: 2000409264, bytes per
sector = 512
2022-01-04 13:52:56:264 =>
[ kvolumemanager.cpp, 00248] => Disk0 set
alignmentFactor =AlignToMB
2022-01-04 13:52:56:310 =>
[ kvolumemanager.cpp, 00227] => Disk1, WD
Elements USB, CHS:60801,255,63, total sectors: 976773168, bytes per sector = 512
2022-01-04 13:52:57:109 =>
[ kvolumemanager.cpp, 00248] => Disk1 set
alignmentFactor =AlignToMB
2022-01-04 13:52:57:702 =>
[ dynamicdisk.cpp, 00215] => Disk0 is
not a dynamic disk.
2022-01-04 13:52:57:702 =>
[ dynamicdisk.cpp, 00215] => Disk1 is
not a dynamic disk.
2022-01-04 13:53:21:726 =>
[ kbatchcommandexecutive.cpp, 01415] =>
DeletePartition DiskIndex:1 Partition:1
2022-01-04 13:53:21:729 =>
[ kvolume.cpp, 00506] => Locking
volume...
2022-01-04 13:53:21:732 =>
[ kvolume.cpp, 00511] => Succeed to
lock volume.
2022-01-04 13:53:21:732 =>
[ kvolume.cpp, 00526] =>
Dismounting volume...
2022-01-04 13:53:21:739 =>
[ kvolume.cpp, 00531] => Succeed to
dismount volume.
2022-01-04 13:53:22:053 =>
[ kbatchcommandexecutive.cpp, 01415] =>
DeletePartition DiskIndex:1 Partition:1
2022-01-04 13:53:22:057 =>
[ kvolume.cpp, 00506] => Locking
volume...
2022-01-04 13:53:22:136 =>
[ kvolume.cpp, 00511] => Succeed to
lock volume.
2022-01-04 13:53:22:136 =>
[ kvolume.cpp, 00526] =>
Dismounting volume...
2022-01-04 13:53:22:168 =>
[ kvolume.cpp, 00531] => Succeed to
dismount volume.
2022-01-04 13:53:22:175 =>
[ kbatchcommandexecutive.cpp, 01415] =>
DeletePartition DiskIndex:1 Partition:1
2022-01-04 13:53:22:178 =>
[ kvolume.cpp, 00506] => Locking
volume...
2022-01-04 13:53:22:264 =>
[ kvolume.cpp, 00511] => Succeed to
lock volume.
2022-01-04 13:53:22:264 =>
[ kvolume.cpp, 00526] =>
Dismounting volume...
2022-01-04 13:53:22:276 =>
[ kvolume.cpp, 00531] => Succeed to
dismount volume.
2022-01-04 13:53:22:319 =>
[ kvolumemanager.cpp, 00227] => Disk0, V-
GEN10SM21SCY1024HY SATA, CHS:124519,255,63, total sectors: 2000409264, bytes per
sector = 512
2022-01-04 13:53:22:475 =>
[ kvolumemanager.cpp, 00248] => Disk0 set
alignmentFactor =AlignToMB
2022-01-04 13:53:22:476 =>
[ kvolumemanager.cpp, 00227] => Disk1, WD
Elements USB, CHS:60801,255,63, total sectors: 976773168, bytes per sector = 512
2022-01-04 13:53:23:503 =>
[ dynamicdisk.cpp, 00215] => Disk0 is
not a dynamic disk.
2022-01-04 13:53:23:503 =>
[ dynamicdisk.cpp, 00215] => Disk1 is
not a dynamic disk.
2022-01-04 13:54:12:343 =>
[ kbatchcommandexecutive.cpp, 01415] =>
CreatePartition DiskIndex:1 StartingOffset:2048 PartitionLength:976764928
PartTypeId:7 FsType:7 ClusterSize:8 Label:"" Letter:73 Active:0 Primary:1
BootVolume:0 SystemVolume:0 GptPartitionType:0
2022-01-04 13:54:17:186 =>
[ kvolumemanager.cpp, 00227] => Disk0, V-
GEN10SM21SCY1024HY SATA, CHS:124519,255,63, total sectors: 2000409264, bytes per
sector = 512
2022-01-04 13:54:17:330 =>
[ kvolumemanager.cpp, 00248] => Disk0 set
alignmentFactor =AlignToMB
2022-01-04 13:54:17:334 =>
[ kvolumemanager.cpp, 00227] => Disk1, WD
Elements USB, CHS:60801,255,63, total sectors: 976773168, bytes per sector = 512
2022-01-04 13:54:17:824 =>
[ kvolumemanager.cpp, 00248] => Disk1 set
alignmentFactor =AlignToMB
2022-01-04 13:54:19:324 =>
[ dynamicdisk.cpp, 00215] => Disk0 is
not a dynamic disk.
2022-01-04 13:54:19:324 =>
[ dynamicdisk.cpp, 00215] => Disk1 is
not a dynamic disk.

You might also like