Scribd
Upload
55 views1 page

LMB162GDC

This document provides specifications for an LCD module with a 16x2 character display. It includes details on the module dimensions, character size, electrical characteristics like voltage thresholds, and a block diagram showing the LCD controller chip and connections to the display panel and backlight. Maximum ratings for voltage, temperature, and current draw are also listed.

Uploaded by

ameer4009 ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
55 views1 page

LMB162GDC

This document provides specifications for an LCD module with a 16x2 character display. It includes details on the module dimensions, character size, electrical characteristics like voltage thresholds, and a block diagram showing the LCD controller chip and connections to the display panel and backlight. Maximum ratings for voltage, temperature, and current draw are also listed.

Uploaded by

ameer4009 ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

LMB162G 16 characters x 2 lines

ABSOLUTE MAXIMUM RATINGS MECHANICAL DATA


Item Symbol Min. Max. Unit Item Nominal Dimensions Unit
Supply Voltage(Logic) VDD - VSS -0.3 7.0 V Module Size( W x H x T ) 122.0 x 44.0 x 9.5 mm
Supply Voltage(LCD) VDD - VO -0.3 13.0 V Viewing Area( W x H ) 99.0 x 24.0 mm
Input Voltage VI -0.3 VDD + 0.3 V Character Size( W x H ) 4.84 x 9.66 mm
Operating Temp. Topr -0 50 C Dot Size( W x H ) 0.92 x 1.1 mm
Storage Temp. Tstg -10 60 C Weight g

ELECTRICAL CHARACTERISTICS ( V DD =5V â0.25V ) PIN CONNECTIONS


Test Typ. Max. Unit
Item Symbol Condition Min. Pin Symbol Level Function
Input High Voltage VIH -- 2.2 -- V DD V 1 VSS -- GND ( 0V )
Input Low Voltage VIL -- - 0.3 -- 0.6 V 2 V DD -- Supply Voltage for Logic(+5V)
Output High Voltage VOH IOH = - 0.2mA 2.4 -- V DD V 3 VO -- LCD Driving Voltage
Output Low Voltage VOL IOL = 1.2mA 0 -- 0.4 V H : Data
4 RS H/L
Supply Current I DD VDD = 5.0V -- 1.5 3.0 mA L : Instruction Code
LCD Driving Voltage VDD - VO Ta=25 C -- 4.6 -- V
5 R/W H/L
H : Read
L : Write
_
6 E H,H >L Enable Signal
BLOCK DIAGRAM
7 DB0 H/L
8 DB1 H/L
9 DB2 H/L
10 DB3 H/L
Data Bus Line
VSS 11 DB4 H/L
16 COM LCD PANEL
VDD LCD 12 DB5 H/L
VO Controller 16 Characters x 2 Lines 13 DB6 H/L
RS LSI 14 DB7 H/L
R/W
KS0066 40 SEG 15 LEDA --
E LED Backlight Power Supply
or Eqv. 40 SEG 16 LEDK --
DB0

Segment driver

DB7
LED BACKLIGHT SPECIFICATIONS (Ta=25 C)
Item Symbol Typ. Max. Unit
LEDA Forward Voltage Vf 4.05 4.25 V
LED Backlight
LEDK 240 mA
Forward Current If --
Emission Wave Length λp 568 -- nm

You might also like