®

BB 621 C
TRACKED PAVER FINISHER

The machine shown can be fitted with additional equipment

ENGINE TECHNICAL SPECS

Make Hatz 2M 41L Transmission hydrostatic

Cylinders 2 Track base 1430 mm (56")

Cooling system air Shoe width 200 mm (8")

Output at 2800 rpm (DIN 6271) 26.4 kW (35.4 HP) Ground pressure (hoppers empty) 0.68 kg/cm2 (9.7 lbs/in2)

Electric starting 12 V Inside turning radius 0.70 m (27.5")

Operating weight (CECE reg.) 4000 kg (8,818 lbs)

SPEED Hopper capacity (tunnel included) 6 t (6.6 ton)

1st gear (work) 0÷ 33 m/min (108 fpm) Hopper discharge height - at centre 490 mm (19")

2nd gear (travel) 0÷ 4.1 km/h (2.5 mph) at sides 525 mm (21")

Ground clearance 185 mm (7.3")

SCREED RB 260

Hydraulically extending screed width 1.40÷ 2.60 m (4'7"÷ 8'6") PERFORMANCES

with 2 extensions (0.20 m (7")) (optional) max 3.00 m (9'10") Max. production 80 t/h (88 tph)

Paving width reduction (optional) 1.40÷ 0.50 m (4'7"÷20") Mat thickness 5÷ 200 mm (0.2"÷8")

Smoothing plate width 245/210 mm (9.6"/8.3")

Screed heating LPG TANK CAPACITIES

Smoothing plate vibration frequency Diesel fuel 69 l (18 gal)

121-06-0301

3400 rpm (56.7 Hz) Hydraulic oil 73 l (19 gal)

Ecological liquid 22 l (6 gal)

All top performances cannot be obtained simultaneously
PAVER FINISHER BB 621 C

Dimens. A B B1 C D D1 E F G H I L M N O P Q R S T T1 U V Z
mm 4040 1400 2600 1975 1250 1500 2800 1725 610 470 500 1295 840 500 200 1280 1420 1600 1600 490 525 1320 2600 185
ft/in 13'3" 4'7" 8'6" 78" 49" 59" 9'2" 68" 24" 18.5" 20" 51" 33" 20" 8" 50" 56" 63" 63" 19" 21" 52" 8'6" 7.3"

CARRIAGE: tracked machine with two rubber shoe crawlers. HOPPER AND FEEDING SYSTEM: the independent
Track tension is achieved by two grease pistons and a shock movement of the two side wings is obtained by two hydraulic
absorption system. cylinders. The bottom plate of the hopper is built of abrasion-
These type of tracks ensures perfect stability, low noise level proof steel.
and excellent leveling performances as it reduces soilslope The conveyor is made of wear-resisting steel.
variations to a minimum. The material conveyed is spread by two independently
controlled reversible augers. Four automatic stop feed
TRANSMISSION: hydrostatic transmission with two variable devices control conveyor and augers operation.
displacement pumps feeding two variable displacement Augers height can be adjusted by raising the screed. This
axial piston motors directly splined to the planetary final facilitates side and reduction paving group assembling, as
reduction gears in oil bath. well as loading the machine onto a trailer.
An electro-hydraulic servo-control consents machine starting
and stopping (for asphalt supply, etc.) with no preset working ELECTRIC SYSTEM: 12 V system with 1 battery 100 A.h.
speed variation. Work lights fitted.
Machine steering is operated by a steering wheel that
controls the variable displacement pumps electric servo-
CONTROLS: the machine is hydraulically controlled and
controls. This system guarantees a gradual and precise
driven by simple switches and levers. All solenoid valves of
steering.
the hydraulic system can be manually operated.
All main components are at easy reach for maintenance and
SCREED RB 260: fitted with two central fixed elements and repair work.
two hydraulically operated side mobile elements. The two
side elements slide on a chromium plated telescopic and
fixed guide. Bushes are oversized to resist shocks and
vibrations.
Smoothing plates are made from wear resisting shape- ON REQUEST:
retaining steel and are heated by four LPG burners, one - Automatic LEVELLING devices:
fitted to each element. - GRADE control, mechanical
Screed vibration is hydraulically controlled and applied over - SLOPE control
the complete length of the screed.
- DIGITAL SLOPE control
Variable paving width is obtained by electro-hydraulic
distributors. - CENTRAL PAVING WIDTH REDUCTION elements to
W V 0.50 m (20")
The screed plate axis allows modifications of shapes (V W )
with different camber angles between +4.5% and -2.5%. - MECHANICAL EXTENSION ELEMENTS with auger
Other adjustments allow recovery of the smoothing plate wear. extensions for paving widths up to 3.00 m (9'10")
- RIGHT SIDE PAVING GROUP from 0.15 m to 0.60 m (6" to
23.6") (up to 1.00 m (39") if the machine is equipped with
BRAKES: the hydrostatic drive acts as the service brake;
mechanical extensions) BITELLI PATENT
the parking brake is a mechanical multi-disk brake with
negative hydraulic control. - BURNERS ELECTRONIC IGNITION with automatic
adjustment of screed temperature
DRIVING POSITION: the operator drives the paver from the - Screed REMOTE CONTROL UNIT with main machine
platform positioned behind the screed. The platform is fitted operative controls
with a pressure sensitive microswitch that indicates the - REVERSIBLE CONVEYOR
operator's presence. - LIGHTING SYSTEM for ROAD CIRCULATION
All machine operations are controlled by simple controls. - BIODEGRADABLE hydraulic oil

Via IV Novembre, 2 - 40061 MINERBIO (Bologna) - ITALY

Tel. +39-051-6607111 - Fax +39-051-6607115
121-06-0301

www.bitelli.com MANAGEMENT SERVICE

UNI EN ISO 9001

ISO 9001 Certified Certificato n° 50 100 0585

Specs and data are subject to change without notice or obligation. Illustrations shown may show the machine fitted with additional equipment.