Instruction Sheet

P/N 108 147C

Hose Fittings

1. Fittings for This section has the following fittings:

High-Pressure Hose  Hose-to-hose connectors
 Hose-to-hose swivel elbows
 Straight pipe-to-hose connectors
 Pipe-to-hose elbows
 Quick-disconnect coupler
 Y-fittings
 Cap (female)

Hose-to-Hose Connectors See Figure 1.

A = 1/2-20 37 JIC Tapper

B = 1/2-20 37 JIC Tapper

Part A B Material Specifications Feature

972 350 1/ -20 1/ -20 Steel zinc plated 3/ and 1/4 hose-to-hose
2 2 16

972 360 1/ -20 1/ -20 316 stainless steel 3/ and 1/4 hose-to-hose
2 2 16

972 503 3/ -16 3/ -16 Steel zinc plated 3/ hose-to-hose

4 4 8

972 107 1/ -20 3/ -16 Steel zinc plated 3/ and 1/4 hose to 3/8 hose
2 4 16

Fig. 1 Hose-to-Hose Connector

 2000 Nordson Corporation 108 147C Manual 5-4

All rights reserved
Issued 1/00
2 Hose Fittings

Hose-to-Hose Swivel Elbows See Figure 2.

A = 37 JIC Tapper female

B = 37 JIC Tapper male

Part A B Material Specifications Feature

972 353 1/ -20 1/ -20 Steel zinc plated 3/ and 1/4 hose-to-fitting
2 2 16

972 400 9/ -18 9/ -18 Steel zinc plated 5/ PTFE hose-to-fitting

16 16 16

B A

Fig. 2 Hose-to-Hose Swivel Elbow

See Figure 3.

A = 37 JIC Tapper male

B = 37 JIC Tapper female

Part A B Material Specifications Feature

972 719 1/ -20 1/ NPTF Steel zinc plated Nordson hose-to-female NPT
2 4

Fig. 3 Hose-to-Female NPT

Manual 5-4 108 147C  2000 Nordson Corporation

All rights reserved
Issued 1/00
 Hose Fittings 3

Straight Pipe-to-Hose See Figure 4.

Connectors
A = NPT
B = 37 JIC Taper

Part Pipe A Hose B Material Specifications Feature

972 025 1/ 1/ -20 Steel zinc plated Standard hose
4 2

972 028 3/ 1/ -20 Steel zinc plated Standard hose

8 2

972 029 1/ 1/ -20 316 stainless steel Standard hose

4 2

972 051 1/ 9/ -18 Brass nickel plated For 5/16 PTFE hose
4 16

972 052 3/ 9/ -18 316 stainless steel For 5/16 PTFE hose
8 16

972 100 1/ 7/ -14 Steel zinc plated Siphon

2 8

972 101 3/ 3/ -16 Steel zinc plated Drain off

8 4

972 102 1/ 7/ -14 316 stainless steel Siphon

2 8

972 103 3/ 3/ -16 316 stainless steel Drain off

8 4

972 111 3/ 7/ -14 Steel zinc plated Siphon

4 8

972 112 3/ 7/ -14 316 stainless steel Siphon

4 8

972 105 3/ 1-1/16-12 Steel zinc plated 180C and 25B 2 and 4:1
4

972 106 1/ 3/ -16 Steel zinc plated Drain off

4 4

972 110 3/ 1-1/16-12 316 stainless steel 180C and 25B 2 and 4:1
4

972 108 1/ 3/ -16 Steel zinc plated NH4 wide/dual passage heaters
2 4

Fig. 4 Straight Pipe-to-Hose Connector

 2000 Nordson Corporation 108 147C Manual 5-4

All rights reserved
Issued 1/00
4 Hose Fittings

Pipe to Hose Elbows See Figure 5.

A = NPT
B = 37 JIC Taper

Part Pipe A Pipe B Material Specifications Feature

972 176 1/ 1/ -20 Steel zinc plated Standard hose
4 2

972 177 1/ 1/ -20 316 stainless steel Standard hose

4 2

972 200 1/ 9/ -18 Steel zinc plated For 5/16 PTFE hose
4 16

972 251 1/ 7/ -14 Steel zinc plated Siphon

2 8

972 252 1/ 7/ -14 316 stainless steel Siphon

2 8

972 255 3/ 3/ -16 Steel zinc plated Drain off

8 4

972 180 3/ 1/ -20 Steel nickel plated Corrosion resistant

8 2

972 583 3/ 1-1/16-12 Steel zinc plated 180C and 25B 2 and 4:1 siphon
4

972 603 3/ 1-1/16-12 316 stainless steel 180C and 25B 2 and 4:1 siphon
4

972 254 1/ 3/ -16 Steel zinc plated —

4 4

972 598 3/ 7/ -14 Steel zinc plated Siphon

4 8

972 599 3/ 7/ -14 316 stainless steel Siphon

4 8

Fig. 5 Pipe-to-Hose Elbow

Manual 5-4 108 147C  2000 Nordson Corporation

All rights reserved
Issued 1/00
 Hose Fittings 5

Quick-Disconnect Coupler See Figure 6.

This connector is designed for dead-end hand airless guns only.

Material flows through this connector in one direction only from the male
half through the female half.

Item Part Material Specifications

— 243 144 Quick-disconnect
1 243 145 Male, half, 1/2-20 JIC
2 243 146 Female, half, 5/8-18 male
3 940 140 O-ring 1/2 x 5/8 in.

2
3

Fig. 6 Quick-Disconnect Coupler

Y-Fittings See Figure 7.

Part A (NPT) B (NPT) C (NPT) Material Specifications Feature

973 952 1/ 1/ 1/ Steel zinc plated Cold airless Y
4 4 4

Fig. 7 Y -Fitting

 2000 Nordson Corporation 108 147C Manual 5-4

All rights reserved
Issued 1/00
6 Hose Fittings

Cap (Female) See Figure 8.

Part A Material Specifications

972 359 1/ -20 JIC Steel zinc plated
2

Fig. 8 Cap (Female)

Manual 5-4 108 147C  2000 Nordson Corporation

All rights reserved
Issued 1/00
 Hose Fittings 7

2. High-Pressure Pipe This section has the following fittings:

 Nipples
 Pipe-reducing bushings (male to female)
 Pipe couplings
 Male reducers
 Street elbows
 90 elbows
 Pipe plugs
 Pipe tees

Nipples See Figure 9.

Part A (NPT) L Material Specifications Feature

973 001 1/ 2-1/2 Steel zinc plated Pipe-to-pipe
8

973 002 1/ 1-1/2 Steel zinc plated —

8

973 026 1/ Close Steel zinc plated —

4

973 029 1/ 1-11/16 hex 316 stainless steel —

4

973 034 1/ 1-11/16 Standard steel —

4

973 037 1/ 1-7/16 hex Steel zinc plated —

4

973 050 3/ Close Steel nickel plated —

8

973 051 3/ 1-1/2 Steel zinc plated —

8

973 052 3/ 2-1/2 Steel zinc plated —

8

973 053 3/ 3 Steel zinc plated —

8

973 059 3/ 1-11/16 hex 316 stainless steel —

8

973 081 1/ Close, hex Steel zinc plated —

2

Fig. 9 Nipple

 2000 Nordson Corporation 108 147C Manual 5-4

All rights reserved
Issued 1/00
8 Hose Fittings

Pipe-Reducing Bushings See Figure 10.

(Male and Female)
A = male
B = female

Part A (NPT) B (NPT) Material Specifications

973 370 3/ 1/ Steel galvanized
8 4

973 372 1/ 1/ Steel zinc plated

4 8

973 371 3/ 1/ 316 stainless steel

8 4

Fig. 10 Pipe-Reducing Bushing (Male and Female)

Pipe Couplings See Figure 11.

Part A (NPT) B (NPT) Material Specifications

973 500 1/ 1/ Steel zinc plated
4 4

973 522 1/ 3/ Steel zinc plated

4 8

973 521 1/ 3/ 316 stainless steel

4 8

973 520 3/ 3/ Steel zinc plated

8 8

Fig. 11 Pipe Coupling

Manual 5-4 108 147C  2000 Nordson Corporation

All rights reserved
Issued 1/00
 Hose Fittings 9

Male Reducers See Figure 12.

Part A (NPT) B (NPT) Material Specifications

973 958 3/ 1/ Steel nickel plated
8 4

973 963 1/ 1/ Steel zinc plated

2 4

973 961 3/ 1/ Steel zinc plated

4 2

973 959 3/ 1/ 316 stainless steel

4 2

B
A

Fig. 12 Male Reducer

Street Elbows See Figure 13.

Part A (NPT) B (NPT) Material Specifications Feature

973 126 1/ 1/ Steel zinc plated SAE hydraulic
8 8

973 151 1/ 1/ Steel zinc plated Long-high-pressure

4 4

973 154 1/ 1/ 316 stainless steel SAE hydraulic

4 4

973 180 3/ 3/ 316 stainless steel SAE hydraulic

8 8

A
B

Fig. 13 Street Elbow

 2000 Nordson Corporation 108 147C Manual 5-4

All rights reserved
Issued 1/00
10 Hose Fittings

90_ Elbows See Figure 14.

Part A (NPT) B (NPT) Material Specifications Feature

973 153 1/ 1/ Steel zinc plated SAE hydraulic
4 4

973 179 3/ 3/ Steel zinc plated SAE hydraulic

8 8

973 176 3/ 3/ 316 stainless steel SAE hydraulic

8 8

Fig. 14 90 Elbow

Pipe Plugs See Figure 15.

Part A B Material Specifications Feature

973 402 1/ NPTF Hex center sunk Steel zinc plated —
8

973 403 1/ NPTF Hex center sunk Steel zinc plated —

16

973 410 1/ NPTF Hex center sunk Steel zinc plated —

4

973 411 1/ NPTF Hex center sunk Steel zinc plated —

4

973 412 1/ NPTF Square Delrin Delrin

4

973 422 3/ NPTF Hex center sunk Steel zinc plated —

8

973 431 1/ NPT Hex center sunk Steel zinc plated —

2

973 415 1/ NPTF Hex center sunk Steel zinc plated —

4

973 423 3/ NPTF Hex center sunk Steel zinc plated —

8

Fig. 15 Pipe Plug

Manual 5-4 108 147C  2000 Nordson Corporation

All rights reserved
Issued 1/00
 Hose Fittings 11

Pipe Tees See Figure 16.

Part A (NPT) B (NPT) C (NPT) Material Feature

Specifications
973 260 1/ 1/ 1/ Steel zinc plated SAE hydraulic
4 4 4

973 273 3/ 3/ 3/ 2000 malleable zinc 2000 psi max

8 8 8
plated
973 282 1/ 1/ 1/ Steel zinc plated SAE hydraulic
2 2 2

973 293 3/ 3/ 1/ Steel zinc plated Circular valve

4 4 2

973 284 1/ 1/ 1/ 316 stainless steel SAE hydraulic

2 2 2

A
C

Fig. 16 Pipe Tee

 2000 Nordson Corporation 108 147C Manual 5-4

All rights reserved
Issued 1/00
12 Hose Fittings

3. High-Pressure Tube This section has the following fittings:

 Pipe-to-tube male connectors
 Pipe-to-tube male elbows
 Tube-to-tube connectors
 Tube-to-tube elbows
Pipe-to-Tube Male See Figure 17.
Connectors
B = OD tube compression

Part A B Material Specifications Feature

971 255 1/ NPTF 3/ OD Steel zinc plated Seamless steel tube
8 8

971 250 1/ NPT 3/ OD Steel zinc plated Seamless steel tube

4 8

971 251 3/ NPT 3/ OD Steel zinc plated Seamless steel tube

8 8

A
B

Fig. 17 Pipe-to-Tube Male Connector

Pipe-to-Tube Male Elbows See Figure 18.

B = OD tube compression

Part Pipe A (NPT) Tubing B Material Specifications Feature

971 450 1/ 5/ OD Steel zinc plated Seamless steel tube
8 16

971 500 3/ 3/ OD Steel zinc plated Seamless steel tube

8 8

971 505 3/ 3/ OD 316 stainless steel Seamless steel tube

8 8

971 504 1/ 3/ OD 316 stainless steel Seamless steel tube

4 8

971 501 1/ 3/ OD Steel zinc plated Seamless steel tube

4 8

Fig. 18 Pipe-to-Tube Male Elbow

Manual 5-4 108 147C  2000 Nordson Corporation

All rights reserved
Issued 1/00
 Hose Fittings 13

Tube-to-Tube Connectors See Figure 19.

Part Tubing A Tubing B Material Specifications Feature

971 702 3/ OD 3/ OD Steel zinc plated Seamless steel tube
8 8

A B

Fig. 19 Tube-to-Tube Connector

Tube-to-Tube Elbows See Figure 20.

Part Tubing A Tubing B Material Specifications Feature

971 703 3/ OD 3/ OD Steel zinc plated Seamless steel tube
8 8

Fig. 20 Tube-to-Tube Elbow

 2000 Nordson Corporation 108 147C Manual 5-4

All rights reserved
Issued 1/00
14 Hose Fittings

4. Low-Pressure Pipe This section has the following fittings:

 Nipples
 Reducing bushings
 Elbows
 Street elbows
 Tees
 Couplings and reducing coupling
 Cross
 Bulkhead fitting
Nipples See Figure 21.

Part A (NPT) L Material Specifications

973 000 1/ 3/ Steel zinc plated
8 4

973 032 1/ 2-1/2 Steel galvanized

4

973 027 1/ 3/ Brass

4 4

973 036 1/ 3 Brass

4

973 076 1/ Close Steel galvanized

2

973 109 3/ 2 Steel galvanized

4

Fig. 21 Nipple

Reducing Bushings See Figure 22 and refer to the Pipe Reducing Bushings (Male and
Female) table in Pipe High Pressure.

Fig. 22 Pipe-Reducing Bushing

Manual 5-4 108 147C  2000 Nordson Corporation

All rights reserved
Issued 1/00
 Hose Fittings 15

Elbows See Figure 23.

Part A (NPT) B (NPT) Material Specifications Feature

973 152 1/ 1/ 150 malleable zinc plated —
4 4

973 158 1/ 1/ 150 malleable galvanized Reducing

4 8

973 300 1/ 3/ 150 malleable galvanized Reducing

2 8

Fig. 23 Elbow

Street Elbows See Figure 24.

Part A (NPT) B (NPT) Material Specifications Feature

973 125 1/ 1/ Brass zinc plated SAE J530a
8 8

973 156 1/ 1/ Steel or brass —

8 4

973 157 1/ 1/ Brass Short

4 4

Fig. 24 Street Elbow

 2000 Nordson Corporation 108 147C Manual 5-4

All rights reserved
Issued 1/00
16 Hose Fittings

Tees See Figure 25.

Part A B C Material Specifications Feature

(NPT) (NPT) (NPT)
973 261 1/ 1/ 1/ Brass —
4 4 4

973 272 3/ 3/ 3/ 150 malleable galvanized —

8 8 8

973 281 3/ 3/ 1/ 150 malleable black Reducing tee

8 8 2

973 280 1/ 3/ 1/ 150 malleable black Reducing tee

2 8 2

973 271 3/ 3/ 1/ 300 malleable black Reducing tee

8 8 4

C
A

Fig. 25 Tee

Couplings and Reducing See Figure 26.

Coupling

Part A (NPT) B (NPT) Material Specifications Feature

973 503 1/ 1/ 150 malleable galvanized —
8 8

973 530 1/ 3/ 150 malleable black Reducing

2 8

973 312 1/ 3/ 150 malleable galvanized Reducing

2 8

973 311 3/ 1/ 150 malleable galvanized Reducing

4 4

973 313 1/ 1/ 125 pound brass Reducing

4 8

Fig. 26 Couplings and Reducing Coupling

Manual 5-4 108 147C  2000 Nordson Corporation

All rights reserved
Issued 1/00
 Hose Fittings 17

Cross See Figure 27.

Part A B C D Material Specifications

(NPT) (NPT) (NPT) (NPT)
973 974 1/ 1/ 1/ 1/ 150 malleable zinc plated
4 4 4 4

973 962 1/ 1/ 1/ 1/ 150 malleable galvanized

2 2 2 2

973 969 3/ 3/ 3/ 3/ 150 malleable zinc plated

4 4 4 4

973 970 3/ 3/ 3/ 3/ 316 stainless steel

4 4 4 4

B
C

A
D

Fig. 27 Cross

Bulkhead Fitting See Figure 28.

Part A (NPTF) B Material Specifications

973 968 1/ 3/ -16 Bulkhead fitting, 1/4 NPTF
4 4

973 981 3/ 1-14 Bulkhead fitting, 3/8 NPTF

8

Fig. 28 Bulkhead Fitting

 2000 Nordson Corporation 108 147C Manual 5-4

All rights reserved
Issued 1/00
18 Hose Fittings

5. Low-Pressure Hose This section has the following fittings:

 Female connectors
 Male adapters
 Male reducer
 Circulation block
 Quick-disconnect air
 Quick-disconnect fluid

Female Connectors See Figure 29.

A = used for air hose and low-pressure fluid hose.

B = plastic tube or plastic paint hose size.

Part A (NPS) B Tube Material Specifications Feature

971 772 1/ 1/ in. Brass nickel plated For 1/4 ID paint tube
4 4

971 770 3/ 1/ in. Brass nickel plated For 1/4 ID paint tube
8 4

971 760 3/ 3/ in. Brass nickel plated For 3/8 ID paint tube
8 8

B
A

Fig. 29 Female Connector

Male Adapters See Figure 30.

B = used for air hose and low-pressure fluid.

Part A (NPT) B Material Specifications Feature

972 550 3/ 3/ NPS Steel zinc plated Pipe-to-air/fluid hose
8 8

970 552 1/ 1/ NPS Brass Pipe-to-air/fluid hose

8 4

972 553 1/ 3/ NPS Steel zinc plated Pipe-to-air/fluid hose

4 8

972 556 1/ 1/ NPSM Brass cadmium plated Pipe-to-air/fluid hose

4 4

Fig. 30 Male Adapter

Manual 5-4 108 147C  2000 Nordson Corporation

All rights reserved
Issued 1/00
 Hose Fittings 19

Male Reducer See Figure 31.

Part A (NPSM) B (NPSM) Material Specifications Feature

972 582 1/ 3/ Brass Hose-to-hose
4 8

A B

Fig. 31 Male Reducer

Circulation Block See Figure 32.

Part A (NPT) B and C C (NPS) Material Specifications Feature

244 913 3/ (female) 3/ (male) 3/ (male) Aluminum and steel zinc plated Gun mounting
8 8 8

B
A

Fig. 32 Circulation Block

Quick-Disconnect Air See Figure 33.

Part A (NPT) Material Specifications Feature

972 594 1/ Steel Female half
4

972 595 1/ Steel Male half

4

Fig. 33 Quick-Disconnect Air

 2000 Nordson Corporation 108 147C Manual 5-4

All rights reserved
Issued 1/00
20 Hose Fittings

Quick-Disconnect Fluid See Figure 34.

Part A (NPT) Material Specifications Feature

972 642 1/ Stainless steel Quick disconnect, female and male
4

Fig. 34 Quick-Disconnect Fluid

Manual 5-4 108 147C  2000 Nordson Corporation

All rights reserved
Issued 1/00
 Hose Fittings 21

6. Low-Pressure Tube This section has the following fittings:

 Pipe-to-tube male elbows
 Tee tube-to-pipe or tube-to-tube
 Nut with ferrule
 Pipe-to-tube male connectors
 Tube-to-tube connectors
 Pipe-to-tube connector female

Pipe-to-Tube Male Elbows See Figure 35.

B = OD plastic tube compression

Part Pipe A Tubing B Material Specifications Feature

(NPTF)
971 405 1/ 1/ Brass Plastic ferrule
8 8

971 403 1/ 1/ Brass Plastic ferrule

8 4

971 406 1/ 1/ Brass Plastic ferrule

4 4

971 508 1/ 3/ Brass Plastic ferrule

8 8

971 506 1/ 3/ Brass Plastic ferrule

4 8

971 515 3/ 3/ Brass Plastic ferrule

8 8

971 509 3/ 1/ Brass Plastic ferrule

8 2

971 407 1/ 1/ Nylon All plastic

8 4

B
A

Fig. 35 Pipe-to-Tube Male Elbow

 2000 Nordson Corporation 108 147C Manual 5-4

All rights reserved
Issued 1/00
22 Hose Fittings

Tee Tube-to-Pipe or See Figure 36.

Tube-to-Tube
B = OD plastic tube compression

Part A Tubing B Material Specifications Feature

971 616 1/ NPTF (pipe) 1/ x 1/4 Brass Plastic ferrule
8 4

971 628 1/ (tube) 1/ x 1/4 Brass Plastic ferrule

4 4

B1

B2

Fig. 36 Tee Tube-to-Pipe or Tube-to-Tube

Nut with Ferrule See Figure 37.

A = OD plastic tube

Part A Material Specifications Feature

972 579 1/ Brass Plastic ferrule
4

Fig. 37 Nut with Ferrule

Manual 5-4 108 147C  2000 Nordson Corporation

All rights reserved
Issued 1/00
 Hose Fittings 23

Pipe-to-Tube Male See Figure 38.

Connectors
B = OD plastic tube compression

Part Pipe A Tubing B Material Specifications Feature

(NPTF)
971 154 1/ 1/ Brass Plastic ferrule
8 4

971 155 1/ 1/ Brass —

4 4

971 156 3/ 1/ Brass —

8 4

971 260 1/ 3/ Brass —

8 8

971 258 1/ 3/ Brass —

4 8

971 259 3/ 3/ Brass —

8 8

Fig. 38 Pipe-to-Tube Male Connector

Tube-to-Tube Connectors See Figure 39.

A = OD plastic tube compression

B = OD plastic tube compression

Part Tubing A Tubing B Material Specifications Feature

971 618 1/ 1/ Brass Ferrule
4 4

971 617 1/ 1/ Brass Bulk head

4 4

Fig. 39 Tube-to-Tube Connector

 2000 Nordson Corporation 108 147C Manual 5-4

All rights reserved
Issued 1/00
24 Hose Fittings

Pipe-to-Tube Connector See Figure 40.

Female
B = OD plastic tube compression

Part Pipe A Tubing B Material Specifications Feature

(NPTF)
971 612 1/ 1/ Brass Plastic ferrule
8 4

Fig. 40 Pipe-to-Tube Connector Female

Manual 5-4 108 147C  2000 Nordson Corporation

All rights reserved
Issued 1/00
 Hose Fittings 25

7. Low-Pressure Plastic This section has the following fittings:

Fittings  Straight connectors
 Elbows
 Tube nuts

Straight Connectors See Figure 41.

Part Thread A Thread B Feature

971 159 1/ NPT 1/ ID tube Used on air line plastic regulator and dump valve
8 4

Fig. 41 Straight Connector

Elbows See Figure 42.

Part Thread A Thread B Feature

247 832 3/ NPTF 3/ ID tube special PTFE Heavy wall; used on plastic regulator
8 16

971 627 3/ NPT 3/ ID tube special PTFE Heavy wall with nut
8 16

971 407 1/ NPT 1/ ID tube Used on air line plastic regulator and dump valve
8 4

971 507 1/ NPT 3/ ID tube special PTFE Heavy wall; used on AN-9 and dump valve
4 16

Fig. 42 Elbow

 2000 Nordson Corporation 108 147C Manual 5-4

All rights reserved
Issued 1/00
26 Hose Fittings

Tube Nuts See Figure 43.

Part Thread A Feature

972 602 3/ OD tube Nut with ferrule; used on heavy wall fittings
8

972 645 1/ OD tube Nut with ferrule; used on heavy wall fittings
2

Fig. 43 Tube Nut

Original copyright date 1979. Nordson and the Nordson logo are registered trademarks of Nordson Corporation.

Delrin is a registered trademark of E. I. DuPont de Nemours and Company.

Manual 5-4 108 147C  2000 Nordson Corporation

All rights reserved
Issued 1/00