Solar Water Pump Presentation

1. Principle And Application

2. Advantages And Functions of DC

Pump

3. AC Pump System

4. Configuration of Solar Pump

5. Accessories Selection

2/24
01
PA R T O N E

3/24
Principle and Application

Principles and Features

The Solar Pumping System makes full use of the Photovoltaic
effect of the crystalline silicon photovoltaic panel interface,
converts solar energy into electricity, and drives the pump to
pump water from deep wells, rivers, lakes, reservoirs and other
water sources.

The Solar Pumping System mainly consists of solar modules,

Pump inverter (controller) and water pump, water tank.

Solar pumps use the long-lasting energy from the sun, work at
sunrise and rest at sunset, without fuel, without power grid, no
battery needed and the water pump is directly driven to pump
water, which greatly saves the costs of construction, operation
and maintenance.

It can be widely used in agricultural irrigation, desert governance,

livestock and animal husbandry, desalination, landscape
fountain, domestic water supply, etc.

4/20
02
PA R T T W O

5/24
Advantages and Functions of DC Pump

1. High Efficiency  2. Multiple drivers &  3. Environmentally-  4. Rust less

Easy Switching friendly
 Full SS304 Stainless Steel
Most efficient permanent  Compatible with diversified  Advanced water-filled motor
magnet brushless motor make power supply systems;  Can adapt to complicated
efficiency up to 97%  Effectively solve the problem underwater environment
The latest MPPT Technology  Can adapt to multiple power of water pollution caused by application;
1）Real-time tracking for the supply modes; the leakage of traditional oil-
filled motors  Avoid corrosion problem
solar panels, output maximum  The perfect solution to solve due to pump damage
power and get largest water trouble that the pump  Achieve true zero pollution.
supply with least panels; cannot work due to fewer
2）Ultra-wide voltage:60~410V power supply options
3）Compatible with any PV
panel
Advantages and Functions of DC Pump

Solar Note: The main difference between

products low-voltage DC permanent magnet
synchronous motor and AC permanent
magnet synchronous motor is that the
former input is low-voltage DC, while
the latter input high-voltage AC.
DC Solar AC Solar Solar pump
Pump Pump Inverter Due to the different input power, the
stator winding and structure of the low-
voltage DC permanent magnet
synchronous motor have been adjusted
Permanent Permanent to adapt to the low-voltage large AC.
AC
DC Brush magnet magnet
asynchronous
Pump synchronous synchronous
water pump
pump pump
Naming Rule

8/24
Advantages and Functions of DC Pump

DC Inverter-HDPI
 Advantages and Functions of DC Pump

Applications
• Agriculture irrigation, livestock feeding, Domestic water lifting.
• Clear water supply from wells or reservoirs
• Off grid solar pumping system
Pump Features
• With MPPT DC controller
• Plastic impeller and diffuser
• AISI304 oil chamber & outlet
• NSK bearing
• High efficiency PMSM brushless motor(PMSM: Permanent Magnet Synchronous Motor)
MPPTDC Controller
• Protection class:IP55
• Ambient temperature: -15~ 60C
• LED Displays working conditions & Fault code
• Auto Start & Stop
• Soft start & VFD function

Recommended models
Recommended Solar Panel
Rated Optimum Input
Model Power(w) Max Flow(m3/h) Max Head(m) Outlet(inch) Cable(m)
Voltage(V) Voltage(V) Open Circuit Voltage(voc) Power
3HDP3.5-80-72-600 600 72 90-120 3.5 80 11Τ4 " 2 <150 ≥1.3*Pump Power
3HDP3.5-95-72-750 750 72 90-120 3.5 95 11Τ4 " 2 <150 ≥1.3*Pump Power
3HDP3.5-62-48-500 500 48 60-90 3.5 62 11Τ4 " 2 <100 ≥1.3*Pump Power
3HDP3.8-123-110-1100 1100 110 110-150 3.8 123 11Τ4 " 2 <200 ≥1.3*Pump Power
3HDP3.5-195-110-1500 1500 110 110-150 3.5 195 11Τ4 " 2 <200 ≥1.3*Pump Power
4HDP6-84-110-1100 1100 110 110-150 6 84 11Τ4 " 2 <200 ≥1.3*Pump Power
Advantages and Functions of DC Pump

Compatible with asynchronous motor and

synchronous permanent magnet motor

GPRS Remote Control

DC With AC/DC and AC/DC
hybrid mode Single and double floating ball switching

cable adaptive within 300 meters Compatible with various power supply modes:
With AC/DC and AC/DC hybrid mode

HDPI Built in temperature control, all-round protection controller

AC
Multifunctions: Compatible with ultra wide voltage ac60-300 DC 90-440
Such as the upper limit speed, child lock function, impeller
cleaning mode, no water protection time setting, and over
temperature protection temperature setting, etc. Full power operation at low voltage input
Advantages and Functions of DC Pump
 Advantages and Functions of DC Pump

Applications
• Agriculture irrigation, livestock feeding, Domestic water lifting.
• Clear water supply from wells or reservoirs
• Off grid solar pumping system
Pump Features
• With MPPT DC controller
• Plastic impeller and diffuser
• AISI304 oil chamber & outlet
• NSK bearing
• High efficiency PMSM brushless motor(PMSM: Permanent Magnet Synchronous Motor)
MPPTDC Controller
• CAN be used for both AC and DC power supply
• Protection class:IP55
• Ambient temperature: -15~ 60C
• LED Displays working conditions & Fault code
• Auto Start & Stop
• Soft start & VFD function
Recommended models
Recommended Solar Panel
AC Optimum Input
Model Power(w) Max Flow(m3/h) Max Head(m) Outlet(inch) Cable(m)
Voltage(V) Voltage(V) Open Circuit Voltage(voc) Power
3HYP3.5-95-110-750P 750 80-280 90-430 3.5 95 11Τ4 " 2 <430 ≥1.3*Pump Power
3HYP6-125-200-1500P 1500 80-280 90-430 6 125 11Τ4 " 2 <430 ≥1.3*Pump Power
4HYP4.5-85-110-750 750 80-280 90-430 4.5 85 11Τ4 " 2 <430 ≥1.3*Pump Power
 Advantages and Functions of DC Pump

HDP
Controller Power of Rated Voltage Recommended Input Maximum input open Solar Panel Alternative Alternative series-parallel
Voltage pump of pump Voltage of Controller circuit voltage (Voc) configuration Series-parallel mode configuration mode
12 80W 12 20-36V 50V 60W 2PCS Two pcs in series connection
24 120W 24 30-48V 50V 80W 2PCS Two pcs in series connection
36 210W 36 30-48V 50V 150W2PCS Two pcs in series connection
48 500W 48 60-90V 100V 330W2PCS Two pcs in series connection
72 750W 72 90-120V 150V 330W3PCS Three pcs in series connection
72 1100W 72 90-120V 150V 280W6PCS 3 pcs in series, 2 strings in parallel 500W3PCS Three pcs in series connection
110 1100W 110 110-150V 200V 450W3PCS Three pcs in series connection
Three pcs in series connection
110 1300W 110 110-150V 200V 550W3PCS Three pcs in series connection 285W6PCS two in parallel
110 1500W 110 110-150V 200V 330W6PCS 3 pcs in series, 2 strings in parallel 650W3PCS Three pcs in series connection
HYP
Municipal Power of Rated Voltage Recommended Input Maximum input open Solar Panel Alternative Alternative series-parallel
Electricity pump of pump Voltage of Controller circuit voltage (Voc) configuration Series-parallel mode configuration mode
80-220V 750W 110 120-430V 430V 280W4PCS Four pcs in series connection
80-220V 1100W 150 160-430V 430V 450W4PCS Four pcs in series connection 400W4PCS Four pcs in series connection
80-220V 1300W 150 160-430V 430V 450W4PCS Four pcs in series connection
80-220V 1500W 200 210-430V 430V 450W5PCS Five pcs in series connection 500W4PCS Four pcs in series connection
80-220V 2200W 300 310-430V 430V 450W7PCS Seven pcs in series connection 400W8PCS Eight pcs in series connection

Power of Rated Voltage Recommended Input Maximum input open Solar Panel Alternative Alternative series-parallel
DC pumps pump of pump Voltage of Controller circuit voltage (Voc) configuration Series-parallel mode configuration mode
180W 12 12-24V 180W2PCS Two pcs in series connection
370W 24 24-48V 330W2PCS Two pcs in series connection
550W 48 48-72V 180W4PCS Four pcs in series connection
1100W 110 110-150V 450W3PCS Three pcs in series connection
1300W 150 150-200V 550W3PCS Three pcs in series connection

14/24
03
PA R T T H R E E

15/24
Ac Pump System

 Advanced MPPT: the maximum power tracking efficiency

reaches 99%.
 Wide voltage & power range: support single-phase 220V, three-
phase 220V and three-phase 380V, power 0.7~710kW.
 Simple and easy operation: no need to set parameters, run
automatically after connecting the lines.
 Multiple protections: water level protection, dry-running
protection, over-voltage & over-current & over-load protection
 , phase loss protection, over temperature protection, etc.
 Low-voltage start: optional booster module to achieve low-
voltage start and reduce costs (for customers who already have
low-power water pumps below 2.2KW).
 Automatic switching: optional switching module, realize
automatic switching of municipal electricity, 24 hours of
uninterrupted operation.
 Support remote monitoring and control: optional GPRS module,
realize remote monitoring, start and stop, fault checking and so
on.
 Economical, low cost (compared to IP54 65 solution)

16/24
Ac Pump System

In order to make the best solution, we need you to provide the following
on-site information:
1) The installation location of the solar pumping system, the longitude
and latitude of the local city of the customer’s country.
2) Daily water consumption (the hourly flow is calculated according to
the local average sunshine time per day).
3) Head (converted from the vertical height of the water storage point
and the water source point plus the height of the horizontal pipe
loss and the bevel distance).
4) Water source situation (water source (well water, river water, pond
water), water quality, etc.).
5) The distance from the pump to the pump station (distance from the
inverter/controller), the distance from the component installation to
the pump station, etc.
6) In view of the existing water pump, when changing to single solar
power supply, it is necessary to know the working time and
frequency of the customer's original water pump, and then make
an alternative plan.

17/24
04
PA R T F O U R

18/24
Configuration of Solar Pump

Power of Inverter MPPT recommended

Model of Inverters Solar panels（Vmp） Connections Pump recommended
(KW) voltage

1-3Phase：220V，50/60Hz

4PCS, 2 pcs in series, 2 strings in Single phase/three phase

SPIm-2S-0.7B 0.75KW Polysilicon 275W 31V DC input:280-350v
parallel (5x boost） 220v0.55KW

Monocrystalline silicon 4PCS, 2 pcs in series, 2 strings in Single phase/three phase

SPIm-2S-1.5B 1.5KW DC input:280-350v
340W 34v parallel (5x boost） 220v0.75KW

Monocrystalline silicon 6PCS, 2 pcs in series, 3 strings in Single phase/three phase 220v
SPIm-2S-1.5B 1.5KW DC input:280-350v
340W 34v parallel (5x boost） 1.1KW

Single phase/three phase

SPIm-2S-0.7B 750W Polysilicon 60W 18V 18PCS, 18 pcs in series DC input:280-350v
220v0.55KW

Single phase/three phase

SPIm-2S-1.5B 1.5KW Polysilicon 80W 18V 18PCS, 18 pcs in series DC input:280-350v
220v0.75KW

Single phase/three phase 220v

SPIm-2S-1.5B 1.5KW Polysilicon 100W 18V 18PCS, 18 pcs in series DC input:280-350v
1.1KW

Single phase/three phase 220v

SPIm-2S-2.2B 2.2KW Polysilicon 285W 31V 9PCS, 9 pcs in series DC input:280-350v
1.5KW

Monocrystalline silicon Single phase/three phase 220v

SPIm-2S-4.0B 4.0KW 7PCS, 7 pcs in series DC input:280-350v
550W 42V 2.2KW

Boost Module Model Max power Max input voltage Working voltage Output voltage
LV40-70 1600W 70V DC 40v-70v DC 240-420V DC
LV60-90 1600W 90V DC 60-90v DC 420-630V DC

19/24
Configuration of Solar Pump
Pump MPPT Recommended
Model No. Power of Inverter Solar panels（Vmp） Connections
recommended Voltage

Municipal Electricity input 3-Phase：380V，50/60Hz Range：-15%～+30%

SPI-4T-4.0B 4.0KW Polysilicon 275W 31V 16PCS, 16 pcs in series 380V 2.2KW DC:450-600V

SPI-4T-4.0B 4.0KW Polysilicon 275W 31V 18PCS, 18 pcs in series 380V 3.0KW DC:450-600V

SPI-4T-5.5B 5.5KW Monocrystalline silicon 450W 41V 14PCS, 14 pcs in series 380V 4.0KW DC:450-600V

SPI-4T-7.5B 7.5KW Monocrystalline silicon 550W 42V 15PCS, 15 pcs in series 380V 5.5KW DC:450-600V

SPI-4T-011B 11KW Monocrystalline silicon 450W 41V 28PCS, 14 pcs in series, 2 strings in parallel 380V 7.5KW DC:450-600V

SPI-4T-011B 11KW Monocrystalline silicon 550W 42V 28PCS, 14 pcs in series, 2 strings in parallel 380V 9.2KW DC:450-600V
SPI-4T-015B 15KW Monocrystalline silicon 550W 42V 30PCS, 15 pcs in series, 2 strings in parallel 380V 11KW DC:450-600V
SPI-4T-015B 15KW Monocrystalline silicon 550W 42V 42PCS, 14 pcs in series, 3 strings in parallel 380V 13KW DC:450-600V
SPI-4T-018B 18.5KW Monocrystalline silicon 550W 42V 45PCS, 15 pcs in series, 3 strings in parallel 380V 15KW DC:450-600V
SPI-4T-022B 22KW Monocrystalline silicon 550W 42V 56PCS, 14 pcs in series, 4 strings in parallel 380V 18.5KW DC:450-600V
SPI-4T-030B 30KW Monocrystalline silicon 550W 42V 65PCS, 13 pcs in series, 5 strings in parallel 380V 22KW DC:450-600V
SPI-4T-030B 30KW Monocrystalline silicon 550W 42V 75PCS 15 pcs in series, 5 strings in parallel 380V 26KW DC:450-600V
SPI-4T-037B 37KW Monocrystalline silicon 550W 42V 84PCS 14 pcs in series, 6 strings in parallel 380V 30KW DC:450-600V
SPI-4T-045B 45KW Monocrystalline silicon 550W 42V 105PCS 15 pcs in series, 7 strings in parallel 380V 37KW DC:450-600V
SPI-4T-055B 55KW Monocrystalline silicon 550W 42V 126PCS 14 pcs in series, 9 strings in parallel 380V 45KW DC:450-600V
SPI-4T-075B 75KW Monocrystalline silicon 550W 42V 150PCS 15 pcs in series, 10 strings in parallel 380V 55KW DC:450-600V
SPI-4T-075B 75KW Monocrystalline silicon 550W 42V 180PCS 14 pcs in series, 12 strings in parallel 380V 63KW DC:450-600V
SPI-4T-090B 90KW Monocrystalline silicon 550W 42V 210PCS 14 pcs in series,15 strings in parallel 380V 75KW DC:450-600V
SPI-4T-0110B 110KW Monocrystalline silicon 550W 42V 255PCS 15 pcs in series, 17 strings in parallel 380V 93KW DC:450-600V
20/24
05
PA R T F I V E

21/24
Accessories Selection

Power
Efficiency

Recommended
1. First, choose a type of pump after analyzing the customer's water source, pump
Flow range station and other environmental conditions, such as deep well pump, surface pump,
horizontal multi-stage centrifugal pump, vertical multi-stage centrifugal pump etc.

2. Check the curve diagram in the manual, and choose the pump close to the best
efficiency point according to the calculated head and required flow rate.

3. DO NOT choose a pump close to the maximum head.

Flow

22/24
Accessories Selection

23/24
Accessories Selection

1. Usually 1.3~1.5 times than the power of the pump, 1.5 times is the common type, and 1.3 times can be
chosen when the competition is fierce.
2. Under the requirement of motor’s working voltage, normally configured 1.414 times than motor voltage.
3. The open circuit voltage shall be less than the voltage marked on the controller.

For example, the DC pump’s power is 750W, and the motor voltage is 72V.
Then P=750W*1.3=975W, Vmp=72V*1.414=101.8V, according to the panel parameters, the most suitable
component is: Monocrystalline silicon 330W, Vmp=37.87V, Voc=45.82V.
The unit solar panel is 330W, and need 3 pieces connected in series, which can not only meets the open
circuit voltage requirements, but also meets the working voltage requirements, and as well as the power
configuration of the solar panel.

Remarks:
a) The open circuit voltage is proportional to the logarithm of the light
intensity, that is, the light intensity changes greatly, and the open circuit
voltage changes very little. Similarly, the MPPT voltage changes very little.
b) The short-circuit current is proportional to the light intensity.
c) The open circuit voltage is inversely proportional to the ambient
temperature, that is, the higher the temperature, the lower the open circuit
voltage。
d) Open circuit voltage is no related to the area of solar panel.

24/24
Accessories Selection

For example, a customer’s motor is 20HP, 380V and he needs to configure solar pumping system. How to select the solar panel?
1. Firstly, we have to make conversion of the power. 1HP=0.735KW, usually takes 0.75KW, so 20HP=15KW,.
2. Secondly, calculate the power required by the solar panel. 15KW*1.5=22.5KW.
It needs to meet the working voltage of 380*1.414=537.32V (takes 540V) then we choose the conventional 545W solar panels.

Open circuit voltage is less than 750V, so directly use the DC working voltage of the inverter (540V) and divide it by the working voltage of
the solar panel (41.8V) to calculate the number of series required for the solar panels, 540*41.8=12.9 takes an integer and 13 solar panels
are connected in series and 3 strings in parallel, that is:
13*545*3=21.255KW, if the customer does not mind less than 1.5 times to the motor power, then this plan can be adopted;
if need to meet 1.5 times the power of the solar panels, than add one panel to each string, that is 14*545*3=22.89KW. It can also meet the
requirement of open circuit and the working voltage.

25/24
Accessories Selection

26/24
1418-35 Moganshan Road, Shangcheng
Industrial Zone, Hangzhou, China

0571-28025572

[email protected]

HEXING HEXING
www.hxgroup.com official website official Accounts