814 USB Sample Processor
EU declaration of conformity
Metrohm AG 8.814.3003EN / 2016-11-01
CH-9100 Herisau
Switzerland
Phone +41 71 353 85 85
Fax +41 71 353 89 01
[email protected]
www.metrohm.com
EU declaration of conformity EN
1 EU declaration of conformity
This declaration attests the compliance of the instrument with the stan-
dard specifications for electrical instruments and accessories and with the
standard specifications for safety and system validation of the manufactur-
ing company.
1.1 Product validity
This declaration is valid for the following products or product versions:
￭ 814 USB Sample Processor
Sample changer with advanced liquid handling abilities for the automation
of batch processing of larger sample series in analytical laboratories.
1.2 Directives
This instrument has the CE marking and complies with the following EU
directives:
￭ 2014/35/EU (Low Voltage Directive, LVD)
￭ 2014/30/EU (EMC Directive, EMC)
￭ 2011/65/EU (Directive for certain hazardous substances, RoHS)
￭ 2012/19/EU (Waste from electrical and electronic equipment, WEEE)
￭￭￭￭￭￭￭￭ 1
Electromagnetic compatibility (EMC) ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1.3 Safety specifications
This instrument fulfills the following safety requirements:
Design and type ￭ EN 61010-1: 2010
testing Safety requirements for electrical equipment for measurement, con-
trol, and laboratory use
￭ EN 61010-2-081: 2003
Particular requirements for automatic and semi-automatic labora-
tory equipment for analysis and other purposes
￭ EN 60529: 2013 – degree of protection IP20
Degrees of protection provided by enclosures (IP Code)
￭ ISO 12100: 2010
General principles for design - Risk assessment and risk reduction
￭ EN 61140: 2016 – protection class I
Protection against electric shock - Common aspects for installation
and equipment
Testing in Produc- Every instrument is routine-tested according to EN/IEC 61010-1 Appen-
tion dix F in the production division:
Check of the protective conductor connection and the insulation from
power circuits.
1.4 Electromagnetic compatibility (EMC)
Requirements ￭ EN 61326-1: 2013
Electrical equipment for measurement, control and laboratory use -
General EMC requirements
1.4.1 Emission
Standards fulfilled ￭ EN 61000-6-3: 2011
￭ EN 55011 / CISPR 11: 2016
￭ EN 61000-3-2: 2014
1.4.2 Immunity
Standards fulfilled ￭ EN 61000-6-2: 2005
￭ EN 61000-4-2: 2009
￭ EN 61000-4-3: 2010
￭ EN 61000-4-4: 2012
￭ EN 61000-4-5: 2014
￭ EN 61000-4-6: 2014
￭ EN 61000-4-8: 2010
￭ EN 61000-4-11: 2004
￭ EN 61000-4-14: 2009
￭ EN 61000-4-28: 2009
2 ￭￭￭￭￭￭￭￭
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ Authorizations and certificates
1.5 Manufacturer
Metrohm AG, Ionenstrasse 6, CH-9100 Herisau/Switzerland
Metrohm AG holds the SQS certificate ISO 9001 – Quality management
system for the development, production and sale of instruments and
accessories for analyses.
Herisau, November 1st, 2016
P. Hunziker P. Klose
Vice President, Head of Quality Management
Head of Development
2 Authorizations and certificates
2.1 Authorization Federal Inspectorate for Heavy Current Installa-
tions ESTI
This instrument complies with the Swiss Ordinance on Electrical Low-
voltage Equipment (NEV; SR 734.26) and the Swiss Federal Law on
Product Safety (PrSG; SR 930.11). The label attests the inspection by
the independent national certification institute ESTI, accredited accord-
ing to EN 45011.
The product is listed in the register of authorizations at ESTI.
2.2 IEC certificate
This instrument has been tested in accordance with the IEC standards
and certified to the IECEE CB Scheme. The tests also comprise the
national differences for Europe, the USA and Canada. Therefore, the
instrument is in compliance with the respective standards EN 61010-1,
UL 61010-1 and CSA-C22.2 No. 61010-1.
The CB certificate is available in the directory of certified products at
electrosuisse.
￭￭￭￭￭￭￭￭ 3
