Unit 2 Geoinfor
Unit 2 Geoinfor
Unit 2 Geoinfor
Introduction
Remote sensing is an art and science of obtaining information about an object or feature without
physically coming in contact with that object or feature. Humans apply remote sensing in their day-
to-day business, through vision, hearing and sense of smell. The data collected can be of many
forms: variations in acoustic wave distributions (e.g., sonar), variations in force distributions (e.g.,
gravity meter), variations in electromagnetic energy distributions (e.g., eye) etc. These remotely
collected data through various sensors may be analyzed to obtain information about the objects or
features under investigation. In this course we will deal with remote sensing through
electromagnetic energy sensors only.
Thus, remote sensing is the process of inferring surface parameters from measurements of the
electromagnetic radiation (EMR) from the Earth’s surface. This EMR can either be reflected or
emitted from the Earth’s surface. In other words, remote sensing is detecting and measuring
electromagnetic (EM) energy emanating or reflected from distant objects made of various materials,
so that we can identify and categorize these objects by class or type, substance and spatial
distribution [American Society of Photogrammetry, 1975].
Different objects reflect or emit different amounts of energy in different bands of the
electromagnetic spectrum. The amount of energy reflected or emitted depends on the properties of
both the material and the incident energy (angle of incidence, intensity and wavelength). Detection
and discrimination of objects or surface features is done through the uniqueness of the reflected or
emitted electromagnetic radiation from the object.
A device to detect this reflected or emitted electro-magnetic radiation from an object is called a
“sensor” (e.g., cameras and scanners). A vehicle used to carry the sensor is called a “platform” (e.g.,
aircrafts and satellites).
C. Interaction of EMR with the object and subsequent reflection and emission
H. Analysis of data
Depending on the source of electromagnetic energy, remote sensing can be classified as passive or
active remote sensing.
In the case of passive remote sensing, source of energy is that naturally available such as the Sun.
Most of the remote sensing systems work in passive mode using solar energy as the source of EMR.
Solar energy reflected by the targets at specific wavelength bands are recorded using sensors
onboard air-borne or space borne platforms. In order to ensure ample signal strength received at the
sensor, wavelength / energy bands capable of traversing through the atmosphere, without
significant loss through atmospheric interactions, are generally used in remote sensing
Any object which is at a temperature above 0o K (Kelvin) emits some radiation, which is
approximately proportional to the fourth power of the temperature of the object. Thus the Earth
also emits some radiation since its ambient temperature is about 300o K. Passive sensors can also be
used to measure the Earth’s radiance but they are not very popular as the energy content is very
low.
In the case of active remote sensing, energy is generated and sent from the remote sensing platform
towards the targets. The energy reflected back from the targets are recorded using sensors onboard
the remote sensing platform. Most of the microwave remote sensing is done through active remote
sensing.
As a simple analogy, passive remote sensing is similar to taking a picture with an ordinary camera
whereas active remote sensing is analogous to taking a picture with camera having built-in flash (Fig.
3).
i. A Uniform Energy Source which provides energy over all wavelengths, at a constant, known, high
level of output
ii. A Non-interfering Atmosphere which will not modify either the energy transmitted from the
source or emitted (or reflected) from the object in any manner.
iii. A Series of Unique Energy/Matter Interactions at the Earth's Surface which generate reflected
and/or emitted signals that are selective with respect to wavelength and also unique to each object
or earth surface feature type.
iv. A Super Sensor which is highly sensitive to all wavelengths. A super sensor would be simple,
reliable, accurate, economical, and requires no power or space. This sensor yields data on the
absolute brightness (or radiance) from a scene as a function of wavelength.
v. A Real-Time Data Handling System which generates the instance radiance versus wavelength
response and processes into an interpretable format in real time. The data derived is unique to a
particular terrain and hence provide insight into its physical-chemical-biological state.
vi. Multiple Data Users having knowledge in their respective disciplines and also in remote sensing
data acquisition and analysis techniques. The information collected will be available to them faster
and at less expense. This information will aid the users in various decision making processes and also
further in implementing these decisions.
Real remote sensing systems employed in general operation and utility have many shortcomings
when compared with an ideal system explained above.
i. Energy Source: The energy sources for real systems are usually non-uniform over various
wavelengths and also vary with time and space. This has major effect on the passive remote sensing
systems. The spectral distribution of reflected sunlight varies both temporally and spatially. Earth
surface materials also emit energy to varying degrees of efficiency. A real remote sensing system
needs calibration for source characteristics.
ii. The Atmosphere: The atmosphere modifies the spectral distribution and strength of the energy
received or emitted (Fig. 5). The effect of atmospheric interaction varies with the wavelength
associated, sensor used and the sensing application. Calibration is required to eliminate or
compensate these atmospheric effects.
iii. The Energy/Matter Interactions at the Earth's Surface: Remote sensing is based on the principle
that each and every material reflects or emits energy in a unique, known way. However, spectral
signatures may be similar for different material types. This makes differentiation difficult. Also, the
knowledge of most of the energy/matter interactions for earth surface features is either at
elementary level or even completely unknown.
iv. The Sensor: Real sensors have fixed limits of spectral sensitivity i.e., they are not sensitive to all
wavelengths. Also, they have limited spatial resolution (efficiency in recording spatial details).
Selection of a sensor requires a trade-off between spatial resolution and spectral sensitivity. For
example, while photographic systems have very good spatial resolution and poor spectral sensitivity,
non-photographic systems have poor spatial resolution.
v. The Data Handling System: Human intervention is necessary for processing sensor data; even
though machines are also included in data handling. This makes the idea of real time data handling
almost impossible. The amount of data generated by the sensors far exceeds the data handling
capacity.
vi. The Multiple Data Users: The success of any remote sensing mission lies on the user who
ultimately transforms the data into information. This is possible only if the user understands the
problem thoroughly and has a wide knowledge in the data generation. The user should know how to
interpret the data generated and should know how best to use them.
c) Able to obtain imagery of any area over a continuous period of time through which the any
anthropogenic or natural changes in the landscape can be analyzed
e) Distortions may occur in an image due to the relative motion of sensor and source
Distribution of the continuum of radiant energy can be plotted as a function of wavelength (or
frequency) and is known as the electromagnetic radiation (EMR) spectrum. EMR spectrum is divided
into regions or intervals of different wavelengths and such regions are denoted by different names.
However, there is no strict dividing line between one spectral region and its adjacent one. Different
regions in EMR spectrum are indicated in Fig. below
ENERGY INTERACTIONS IN THE ATMOSPHERE
In many respects, remote sensing can be thought of as a reading process. Using various sensors, we
remotely collect data that are analysed to obtain information about the objects, areas or
phenomena being investigated. In most cases the sensors are electromagnetic sensors either air-
borne or space-borne for inventorying. The sensors record the energy reflected or emitted by the
target features. In remote sensing, all radiations traverse through the atmosphere for some distance
to reach the sensor. As the radiation passes through the atmosphere, the gases and the particles in
the atmosphere interact with them causing changes in the magnitude, wavelength, velocity,
direction, and polarization.
In order to understand the interactions of the electromagnetic radiations with the atmospheric
particles, basic knowledge about the composition of the atmosphere is essential.
Atmosphere is the gaseous envelop that surrounds the Earth’s surface. Much of the gases are
concentrated within the lower 100km of the atmosphere. Only 3x10-5 percent of the gases are
found above 100 km (Gibbson, 2000).
Energy Interactions
The radiation from the energy source passes through some distance of atmosphere before being
detected by the remote sensor as shown in Fig
The distance travelled by the radiation through the atmosphere is called the path length. The path
length varies depending on the remote sensing techniques and sources.
For example, the path length is twice the thickness of the earth’s atmosphere in the case of space
photography which uses sunlight as its source. For airborne thermal sensors which use emitted
energy from the objects on the earth, the path length is only the length of the one way distance
from the Earth’s surface to the sensor, and is considerably small.
The effect of atmosphere on the radiation depends on the properties of the radiation such as
magnitude and wavelength, atmospheric conditions and also the path length. Intensity and spectral
composition of the incident radiation are altered by the atmospheric effects. The interaction of the
electromagnetic radiation with the atmospheric particles may be a surface phenomenon (e.g.,
scattering) or volume phenomenon (e.g., absorption). Scattering and absorption are the main
processes that alter the properties of the electromagnetic radiation in the atmosphere.
Scattering
Atmospheric scattering is the process by which small particles in the atmosphere diffuse a portion of
the incident radiation in all directions. There is no energy transformation while scattering. But the
spatial distribution of the energy is altered during scattering.
Rayleigh scattering
Mie scattering
Non-selective scattering
Rayleigh scattering
Rayleigh scattering mainly consists of scattering caused by atmospheric molecules and other tiny
particles. This occurs when the particles causing the scattering are much smaller in diameter (less
than one tenth) than the wavelengths of radiation interacting with them.
Smaller particles present in the atmosphere scatter the shorter wavelengths more compared to the
longer wavelengths.
The scattering effect or the intensity of the scattered light is inversely proportional to the fourth
power of wavelength for Rayleigh scattering. Hence, the shorter wavelengths are scattered more
than longer wavelengths
Rayleigh scattering
Mie Scattering
Another type of scattering is Mie scattering, which occurs when the wavelengths of the energy is
almost equal to the diameter of the atmospheric particles. In this type of scattering longer
wavelengths also get scattered compared to Rayleigh scatter
In Mie scattering, intensity of the scattered light varies approximately as the inverse of the
wavelength.
Mie scattering is usually caused by the aerosol particles such as dust, smoke and pollen. Gas
molecules in the atmosphere are too small to cause Mie scattering of the radiation commonly used
for remote sensing.
Non-selective scattering
A third type of scattering is nonselective scatter, which occurs when the diameters of the
atmospheric particles are much larger (approximately 10 times) than the wavelengths being sensed.
Particles such as pollen, cloud droplets, ice crystals and raindrops can cause non-selective scattering
of the visible light.
For visible light (of wavelength 0.4-0.7μm), non-selective scattering is generally caused by water
droplets which is having diameter commonly in the range of 5 to 100 μm. This scattering is
nonselective with respect to wavelength since all visible and IR wavelengths get scattered equally
giving white or even grey color to the clouds.
Absorption
Absorption is the process in which incident energy is retained by particles in the atmosphere at a
given wavelength. Unlike scattering, atmospheric absorption causes an effective loss of energy to
atmospheric constituents.
The absorbing medium will not only absorb a portion of the total energy, but will also reflect, refract
or scatter the energy. The absorbed energy may also be transmitted back to the atmosphere.
The most efficient absorbers of solar radiation are water vapour, carbon dioxide, and ozone.
Gaseous components of the atmosphere are selective absorbers of the electromagnetic radiation,
i.e., these gases absorb electromagnetic energy in specific wavelength bands. Arrangement of the
gaseous molecules and their energy levels determine the wavelengths that are absorbed.
Since the atmosphere contains many different gases and particles, it absorbs and transmits many
different wavelengths of electromagnetic radiation. Even though all the wavelengths from the Sun
reach the top of the atmosphere, due to the atmospheric absorption, only limited wavelengths can
pass through the atmosphere. The ranges of wavelength that are partially or wholly transmitted
through the atmosphere are known as "atmospheric windows." Remote sensing data acquisition is
limited through these atmospheric windows.
Fig. (a) Spectral characteristics of main energy sources (b) Atmospheric windows and (c) Common
remote sensing systems at different wavelengths
From Fig. above it can be observed that electromagnetic radiation at different wavelengths is
completely absorbed, partially absorbed or totally transmitted through the atmosphere. Nitrogen
and other gaseous components in the atmosphere cause absorption of wavelengths shorter than 0.1
μm. Wavelengths shorter than 0.3μm (X-rays, Gamma rays and part of ultraviolet rays) are mostly
absorbed in the atmosphere. This is caused by the ozone (O3) present in the upper atmosphere.
Oxygen in the atmosphere causes absorption centered at 6.3μm.
Infrared (IR) radiation is mainly absorbed due to the rotational and vibrational transitions of the
molecules. The main atmospheric constituents responsible for infrared absorption are water vapour
(H2O) and carbon dioxide (CO2) molecules. Most of the radiation in the far infrared region is also
absorbed by the atmosphere. However, absorption is almost nil in the microwave region.
The most common sources of energy are the incident solar energy and the radiation from the Earth.
The wavelength at which the Sun’s energy reaches its maximum coincides with the visible band
range. The energy radiated from the Earth is sensed through the windows at 3 to 5μm and 8 to
14μm using devices like thermal scanners.
ii. The available atmospheric windows in the spectral range(s) considered. The spectral range of the
sensor is selected by considering the energy interactions with the features under investigation.
iii. The source, magnitude, and spectral composition of the energy available in the particular range.
iv. Multi Spectral Sensors sense simultaneously through multiple, narrow wavelength ranges that
can be located at various points in visible through the thermal spectral regions
When a satellite is launched into the space, it moves in a well defined path around the Earth, which
is called the orbit of the satellite. Gravitational pull of the Earth and the velocity of the satellite are
the two basic factors that keep the satellites in any particular orbit. Spatial and temporal coverage of
the satellite depends on the orbit. There are three basic types of orbits in use.
Geo-synchronous orbits
Sun-synchronous orbits
Geosynchronous orbit
Geostationary or geosynchronous orbit is the one in which the time required for the satellite to
cover one revolution is the same as that for the Earth to rotate once about its polar axis. In order to
achieve this orbit period, geo-synchronous orbits are generally at very high altitude; nearly 36,000
km.
Geo-synchronous orbits are located in the equatorial plane, i.e with an inclination of 180 degrees.
Thus from a point on the equator, the satellite appears to be stationary. The satellites revolve in the
same direction as that of the Earth (west to East).
Geostationary or geosynchronous orbits are used for communication and meteorological satellites.
Example: INSAT, MeteoSAT, GOES, GMS etc.
Polar orbits are usually medium or low orbits (approximately 700-800km) compared to the geo-
synchronous orbits. Consequently the orbit period is less, which typically varies from 90-103
minutes. Therefore satellites in the polar orbits make more than one revolution around the earth in
a single day.
Sun-synchronous orbits
It is a special case of polar orbit. Like a polar orbit, the satellite travels from the north to the south
poles as the Earth turns below it. In a sun-synchronous orbit, the satellite passes over the same part
of the Earth at roughly the same local time each day. These orbits are between 700 to 800 km
altitudes. These are used for satellites that need a constant amount of sunlight.
A typical sun synchronous satellite completes 14 orbits a day, and each successive orbit is shifted
over the Earth’s surface by around 2875 km at the equator. Also the satellite’s path is shifted in
longitude by 1.17deg (approximately 130.54 km) everyday towards west, at the equator “from
platforms and sensors”.
Remote sensing applications generally use near polar, sun-synchronous, near circular orbits. The
near polar orientation helps to attain near global coverage, whereas the near circular orbit helps to
attain uniform swath for the images. Sun synchronous orbits are preferred for maintaining constant
angle between the aspect of incident sun and viewing by the satellite.
Remote sensing satellite orbits maintain nearly 90 degree inclination from the equatorial plane for
the difference in the gravitational pull. Also, medium orbit periods are adopted for the remote
sensing satellites so as to assure the global coverage in each single day.
Resolution refers to the ability of a remort sensing system to record and display fine details. Four
types of resolutions are defined for the remote sensing systems.
Spatial resolution
Spectral resolution
Temporal resolution
Radiometric resolution
Spatial resolution
A digital image consists of an array of pixels. Each pixel contains information about a small area on
the land surface, which is considered as a single object.
Spatial resolution is a measure of the area or size of the smallest dimension on the Earth’s surface
over which an independent measurement can be made by the sensor.
Spectral resolution
Spectral resolution represents the spectral band width of the filter and the sensitiveness of the
detector. The spectral resolution may be defined as the ability of a sensor to define fine wavelength
intervals or the ability of a sensor to resolve the energy received in a spectral bandwidth to
characterize different constituents of earth surface. The finer the spectral resolution, the narrower
the wavelength range for a particular channel or band.
Radiometric resolution
Radiometric resolution of a sensor is a measure of how many grey levels are measured between
pure black (no reflectance) to pure white. In other words, radiometric resolution represents the
sensitivity of the sensor to the magnitude of the electromagnetic energy.
The finer the radiometric resolution of a sensor the more sensitive it is to detecting small differences
in reflected or emitted energy or in other words the system can measure more number of grey
levels.
Temporal Resolution
Temporal resolution describes the number of times an object is sampled or how often data are
obtained for the same area
The absolute temporal resolution of a remote sensing system to image the same area at the same
viewing angle a second time is equal to the repeat cycle of a satellite.