Digital

multimeters
DMG 600-610
Digital multimeters
DMG 600 - 610

are capable of viewing

the measurements
with high accuracy on
the wide LCD display,
which allow to control
energy distribution
networks.

 Easy and intuitive menu navigation

 LCD display with text in 5 languages
 Expandability with EXP... modules
 High measurement accuracy
 Display of voltage and current
harmonics up to the 15th order
 Wide range for power supply,
measurements and temperature
 Suitable for LV, MV and HV electric
systems and installations
 

 


Plug-in modules LCD display with icons and text

Optical port

APP
Wi-Fi dongle

The main features include an extended power

supply voltage range (100...440VAC), high
measurement accuracy (±0.5% for voltage and
current), expandability (using EXP modules) and
LCD interactive interface for simple use.
Main measurements and functions include:
Voltage: phase, line and system values
Current: phase values (neutral current
calculated)
Power: apparent, active and reactive phase
and total values
Power Factor per phase and total
Frequency of measured voltage value
HIGH-LOW-AVERAGE value functions for all measurements
Maximum demand of power and current values
Voltage and current asymmetry
Total harmonic distortion (THD): voltage and current
Display of voltage and current harmonics up to the 15th order
Energy meters for active, reactive,
apparent partial and total values,
per phase and system values
Hour counter for programmable
total and partial hours
Phase active power unbalance.
 Digital multimeters DMG 600 - 610
Optical port
LCD display
Unit of measure Measurement value DMG 600 and DMG 610 are equipped with a front optical port to support
New icon type display, with white backlight to ensure good programming through CX 01 and to use the functionality
visibility in environments with low light conditions. of CX 02 Wi-Fi dongle.
Scrolling text with 4 characters to show: Advantages:
• Alarm messages configured by the user • No need to remove power from the panel to connect to the multimeter
• Help messages for the user • Electrical safety (no electrical connection)
• Description of setup menu and parameters. • IP54 guaranteed
The text is available in 5 languages • Convenience of working on the front.
(English, Italian, French, Spanish and Portuguese).

Limit thresholds and

Bar graph, percentage protection functions
Type of of a full scale value On all available measurements, the user can set up to 8 independent
thresholds to generate alarms or activate outputs in excess of the set
measurement values. The user can decide the activation of the limit threshold on
the overcoming of maximum, minimum values or both, with on and
off delay to protect the system from unnecessary trippings and
USB and Wi-Fi dongle Subpage indication: hysteresis thresholds to avoid the "bouncing" around the threshold.
Through the optical port, direct connection to a PC USB Voltage
Instantaneous measurements,
port (using CX 01) or via WiFi (using CX 02) is allowed.
maximum, minimum, average
CX 02 dongle (WiFi) can furthermore make: Flashing icon values and maximum demand
Limit
thresholds
• Copy of the parameters
All parameters in the DMG can be saved in the CX 02
for alarms
memory and in case reloaded on the same device
(backup function) or on a different one of the same Active energy meter Relay output
type (replication of the configuration). t
always available in all (using EXP10 03)
• Clone of the device settings
In addition to the copy of the parameters, the current pages Relay
values of energy meters and hour counters can be
saved in memory as well, in order to fully replicate a Adding the EXP1003 expansion module to the DMG600-610
DMG on another device of the same type or to restore provides protection relay functions:
the DMG to a previously saved state. • Broad range of protection functions (maximum or minimum
voltage, current, frequency, or power, ...)
• Relay activation (NC or NO logic) on a specific protection or on
Scrolling text in case of alarms, messages all at once
• Includes 2 changeover relays, independently configurable with
for the user or parameter setup different protection functions
Alarms and notification • Protection functions activated by digital inputs.
by flashing display
To the limit thresholds or to the activation of a digital Management of power "maximum demand"
input, there are available 4 alarms with user- Often in the contracts between user and utility, a limit on the maximum demand of active power,
configurable text description. When an alarm occurs, calculated as an average over a time window, exists. In order to help the user, DMG 600 and DMG 610
an icon and a descriptive text appear on any page of Expandability (1 slot) include features which allow the control of demand limits as follows:
the meter. The configuration of the devices in different installations can have many • 4 methods of integration of active and reactive power:
Setting a parameter, the user can activate the flashing variants, for example the types of communication (USB, RS485, Ethernet) or - Fixed window
of the display backlight in case of alarm. The alarm the number of inputs and outputs required. - Moving average
becomes visible even from a distance, saving a DMG 600 and DMG 610 support expandability by EXP... modules. - Synchronisation via digital input (typical solution used by utilities)
warning light indicating a global alarm. The expansion modules shared with other devices lighten the costs of - Synchronisation message via the serial interface (Modbus)
management • Setting a threshold on the average power kW Peak demand
and first of all guarantee configuration flexibility at installation time and secondly ease of value, in order to activate outputs which
performance increasing when the system is already in operation. can disconnect non-priority loads to limit
Peak usage rescheduled to
The following EXP modules are available: the need of power or to notify the user return below lower threshold
• Digital inputs and outputs (static type to generate energy pulses or relay type to control coils) about the need to reduce the loads.
• USB, RS232, RS485 and Ethernet communication. Shaved peak demand
The module is recognized automatically by the base device which set it to be used. The particular
shape of the back of the DMG lets the addition of the expansion module without increasing the
space required inside the electrical panel, because the size of the EXP module is fully contained in
the base module size, limited to 65mm only, including connectors.
t
 Sam1 APP
Furthermore, CX 02 dongle is the access point to the device through
the Sam1 APP.
Thanks to Sam1, one can:
• See on smartphones or tablets all the measures of the multimeter
• Send commands, such as counters reset or enabling and
disabling of multimeter outputs
• Set the parameters, save a copy in a file and retrieve it in case of
need (the file can be sent via email as well)
• See active user alarms.
Sam1 APP can be downloaded from
Google Play Store or Apple iTunes.

PARAMETER SETTING MEASUREMENT VIEWING SEND COMMANDS ALARM VIEWING

configuration and remote control software

provides for:
• Transfer parameter settings from PC to DMG 110
and vice-versa
• Read measurements
• Display events and alarms
• Send commands.

energy management software

to supervise and control (via Web server) the electrical
parameters measured by LOVATO Electric devices
with a communication port.
In addition to providing datalogs and simple,
user-configured Web pages, it can also be used to:
• Configure alarms (for sending by email)
• Make and view trend graphs
• Send commands to devices
• Energy usage by time slots.
HOW TO ORDER

LCD multimeters Order code Description

DMG 600 Backlight icon LCD, 72x46mmm, auxiliary supply100-440VAC / 120-250VDC,
front optical port
DMG 610 Backlight icon LCD, 72x46mmm, auxiliary supply 100-440VAC / 120-250VDC,
front optical port and RS485 port

Operational characteristics
– Auxiliary supply voltage range: 100-440VAC / – Non-volatile memory for data storage
120-250VDC – Communication protocol Modbus-RTU, ASCII
DMG 600 - DMG 610 – Voltage measurement range: 50-720VAC and TCP
– Usage in medium and high-voltage systems – Compatible with software and APP
with voltage transformers – Flush-mount housing 96x96mm
– Rated input current: 1A or 5A – IEC degree of protection: IP54 on front; IP20 at
– Frequency measurement range: 45-66Hz terminals.
– True RMS measurements: for voltage and
current
– Measurement accuracy:
• Voltage: ±0.5% (50-720VAC)
• Current: ±0.5% (0.1-1.1In) Certifications and compliance
• Power: ±1% f.s. Certifications obtained: EAC, cULus.
• Frequency: ±0.05% Compliant with standards: IEC/EN 61010-1,
• Active energy: Classe 1 (IEC/EN 62053-22) IEC/EN 61000-6-2, IEC/EN 61000-6-3,
• Reactive energy: Class 2 (IEC/EN 62053-23) UL 61010-1, CSA C22-2 n°61010-1.

Expansion modules Order code Description Communication Order code Description

Inputs and outputs ports and CX 01 USB/optical dongle for
EXP10 00 4 opto-isolated digital accessories PC − LOVATO Electric
inputs product connection,
for programming, data
EXP10 01 4 opto-isolated static
download, diagnostics
outputs
and firmware upgrade.
EXP10 02 2 digital inputs and Complete with cable,
2 static outputs, CX 01
1.8m long
opto-isolated
CX 02 Wi-Fi dongle for
EXP10 03 2 relay outputs rated PC − LOVATO Electric
5A 250VAC product programming,
EXP10...
EXP10 08 2 opto-isolated digital data download,
inputs and 2 relay CX 02
diagnostics and
outputs rated 5A cloning
250VAC EXP80 00 Plastic insert for
Communication ports customising label
EXP10 10 Opto-isolated USB EXP80 00 fixing
interface
EXP10 11 Opto-isolated RS232
interface
EXP10 12 Opto-isolated RS485
interface
EXP10 13 Opto-isolated Ethernet
interface with web
server function
 details, such as technical and operational data, drawings, diagrams and instructions, etc., do not have any contractual value.
The products described in this publication are subject to be revised or improved at any moment. Catalogue descriptions and

In addition, products should be installed and used by qualified personnel and in compliance with the regulations in force for
electrical systems in order to avoid damages and safety hazards.

www.LovatoElectric.com
Follow us
LOVATO ELECTRIC S.P. A. Tel. +39 035 4282111 Sales Department:
VIA DON E. MAZZA, 12 Fax +39 035 4282200 Tel. +39 035 4282354
24020 GORLE (BERGAMO) ITALY E-mail [email protected] Fax +39 035 4282400

LOVATO Electric offices in the world

United Kingdom Spain Poland Czech Republic China
LOVATO ELECTRIC LTD LOVATO ELECTRIC S.L.U. LOVATO ELECTRIC SP. Z O.O. LOVATO ELECTRIC S.R.O. LOVATO ELECTRIC
Tel. +44 8458 110023 Tel. +34 93 7812016 Tel. +48 71 7979010 Tel. +420 226 203203 (SHANGHAI) CO LTD
PD 98 GB 10 15

www.Lovato.co.uk www.LovatoElectric.es www.LovatoElectric.pl www.LovatoElectric.cz Tel. +86 21 62961837

www.LovatoElectric.cn
Germany USA United Arab Emirates Romania
LOVATO ELECTRIC GmbH LOVATO ELECTRIC INC. LOVATO ELECTRIC ME FZE LOVATO ELECTRIC SRL
Tel. +49 7243 7669370 Tel. +1 757 5454700 Tel. +971 4 3712713 Tel. +40 372 074 155
www.LovatoElectric.de www.LovatoUsa.com www.LovatoElectric.ae www.LovatoElectric.ro
France Canada Turkey Russia
LOVATO ELECTRIC SAS LOVATO ELECTRIC CORP. LOVATO ELEKTRK LTD 000 LOVATO ELECTRIC
Tel. +33 4 72913030 Tel. +1 450 6819200 Tel. +90 216 5401426-27-28 www.LovatoElectric.ru
www.LovatoElectric.fr www.Lovato.ca www.LovatoElectric.com.tr

LOVATO Electric products are available in over 100 countries through its distributors.