Scribd
Upload
78 views1 page

Butterfly Valve

TSC butterfly valves are suitable for use in various industries where positive shut-off of clear and slurry fluids is required. They feature mill flatted stems for positive drive and retention pins to increase strength. The field-replaceable seats are bonded elastomer rings fitted in the valve body. One-piece ribbed bodies are available in wafer and tapped-lug patterns in various materials and sizes up to ANSI Class 150.

Uploaded by

o_tosta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
78 views1 page

Butterfly Valve

TSC butterfly valves are suitable for use in various industries where positive shut-off of clear and slurry fluids is required. They feature mill flatted stems for positive drive and retention pins to increase strength. The field-replaceable seats are bonded elastomer rings fitted in the valve body. One-piece ribbed bodies are available in wafer and tapped-lug patterns in various materials and sizes up to ANSI Class 150.

Uploaded by

o_tosta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TSC Butterfly Valves

TSC butterfly valves are can be applied in chemical


processing, power plants, refineries, shipbuilding,
pulp and paper mills, and wherever positive shut-off is
required for clear and slurry fluids. They are an ideal
choice for heating, ventilation and air conditioning
applications.

STEMS

Upper stems are mill flatted for positive drive and


simple installation of handles and actuators. The plate
is retained by tangential pins, for increased strength
and overall valve integrity when handles or actuators
are removed from the valve top.

SEAT

Constructed by bonding the elastomer to a rigid BODY


back-up ring, which forms the outside periphery of
One piece bodies are ribbed to assure high strength
the seat and slip fitted in the valve body, the seat is
with minimal weight. Bodies are cast in both wafer
field replaceable without special tools.
and tapped-lug patterns, in a wide variety of material
STEM JOURNAL choices, to meet a broad range of requirements.
Body rating is ANSI Class 150 (285 psi non-shock).
Two self-lubricating bronze bearings reduce torsional Wafer body diameters are designed to self-center
friction, eliminate galling and seizing of the stem, in ANSI 150 flange patterns.
while supporting the stem against side loading from
pressure on the closed disc For additional information please contact your TSC
representative.
DISC

TSC butterfly valve discs and seats are


configured for low pressure drop and high flow
coefficients. Full radius polished edges slide into
drop tight seat engagement with minimal effort.

DISC DRIVE

Proper orientation of the stem/disc connection


is assured by the rectangular drive. The disc is
permitted to float on the stem to perfectly center in
TSC Offshore
the valve seat.
333 Cypress Run, Suite 375
Houston, TX 77094
Phone: 281.945.4400
Facsimile: 281.945.4405
E-Mail: [email protected]
04/22/09 www.tscoffshore.com

You might also like