Electronic pressure measurement

Pressure transmitter for general industrial applications Model A-10

Applications
Machine building Machine tools Measurement and control technology Hydraulics and pneumatics Pumps and compressors

Special features
Measuring ranges from 0 1 bar to 0 600 bar Non-linearity 0.25 % or 0.5 % Outputsignal 4 ... 20 mA, 0 ... 10 V, 0 ... 5 V and others

Electrical connection: Angular connector form A and C, Process connection G 1/4 A DIN 3852-E, 1/4 NPT and

connector M12 x 1, cable outlet 2 m others

Pressure transmitter model A-10

Description
The A-10 pressure transmitter for general industrial applications is not only notable for its compact design, but it also offers excellent quality at an extremely competitive price. The user can choose between a non-linearity of 0.25 % and 0.5 %. A free test certificate provides information on the measuring points recorded during manufacture. The A-10 is set up for worldwide use through the international cULus and GOST certification. The various pressure units and process connections required for particular operating conditions are available at short notice.

WIKA data sheet PE 81.60 05/2011

Data sheets showing similar products: Pressure transmitter for general applications; model S-10; see data sheet PE 81.01

Page 1 of 7

Measuring ranges
Relative pressure
bar psi 0 ... 40 0 ... 1 0 ... 60 0 ... 1.6 0 ... 100 0 ... 2.5 0 ... 160 0 ... 4 0 ... 250 0 ... 6 0 ... 400 0 ... 10 0 ... 600 0 ... 16 0 ... 25 0 ... 300

0 ... 500

0 ... 15

0 ... 1000

0 ... 25

0 ... 1500

0 ... 30

0 ... 2000

0 ... 50

0 ... 3000

0 ... 100

0 ... 5000

0 ... 160

0 ... 10000

0 ... 200

Absolute pressure
bar psi 0 ... 1 0 ... 15 0 ... 1.6 0 ... 25 0 ... 2.5 0 ... 30 0 ... 4 0 ... 50 0 ... 6 0 ... 100 0 ... 10 0 ... 150 0 ... 16 0 ... 200 0 ... 25 0 ... 300

Vacuum and +/- measuring range

bar psi -1 ... 0 -1 ... 15 -1 ... 0.6 -1 ... 24 -30 inHG ... 15 -1 ... 1.5 -30 inHG ... 30 -1 ... 3 -30 inHG ... 60 -1 ... 5 -30 inHG ... 100 -1 ... 9 -30 inHG ... 160

-30 inHG ... 0

-30 inHG ... 200

-30 inHG ... 300

The given measuring ranges are also available in kg/cm2, MPa and kPa. Other measuring ranges available on request

Overpressure safety: 2-fold Vacuum resistance: from 10 bar

Output signal
Signal type
Current (2-wire) Voltage (3-wire) Ratiometric (3-wire)

Value
4 ... 20 mA DC 0 ... 10 V DC 0 ... 5 V DC 1 ... 5 V DC 0.5 ... 4.5 V

DC 0.5 ... 4.5 V

Other output signals available on request

Load in Current (2-wire): (power supply - 8 V) / 0.02 A Voltage (3-wire): > Umax / 1 mA Ratiometric (3-wire): > 4.5k

Power supply
Supply voltage 2) Current
Standard Option DC 8 ... 30 V DC 8 ... 35 V
1)

Voltage
DC 8 ... 30 V DC 8 ... 35 V

DC 0 ... 10 V
DC 14 ... 30 V DC 14 ... 35 V

Ratiometric
DC 5 V 10 % -

Total current consumption Current output: Voltage output: Signal current, maximum 25 mA 8 mA

1) Not possible with non-linearity 0.25 % BFSL 2) The power supply for the pressure transmitter must be made via an energy-limited electrical circuit in accordance with section 9.3 of UL/EN/IEC 61010-1 or an LPS to UL/EN/ IEC 60950-1 or class 2 in accordance with UL1310/UL1585 (NEC or CEC). The power supply must be suitable for operation above 2,000 m should the pressure transmitter be used at this altitude.

Page 2 of 7

WIKA data sheet PE 81.60 05/2011

Accuracy
Non-repeatability: Long-term drift (per IEC 61298-2): Signal noise: Settling time: Temperature error at 0 ... 80 C Typical: Maximum: 0.1 % of span 0.1 % of span 0.3 % of span < 4 ms 1 % of span 2.5 % of span

Non-linearity per BFSL (IEC 61298-2)

Standard Option 0.5 % of span 0.25 % of span

Standard Measuring deviation of the zero signal Typical 0.5 % of span Maximum 0.8 % of span Accuracy at room temperature 3): 1 % of span
3) Including non-linearity, hysteresis, zero offset and end value deviation (corresponds to measured error per IEC 61298-2). Calibrated in vertical mounting position with process connection facing downwards.

Option Measuring deviation of the zero signal Typical 0.15 % of span Maximum 0.4 % of span Accuracy at room temperature 3): 0.5 % of span, 0.6 % of span (at 0 ... 5 V)

Reference conditions (per IEC 61298-1)

Temperature: Atmospheric pressure: Humidity: Nominal position: Power supply: Load: Mounting position: 15 ... 25 C 950 ... 1050 mbar 45 ... 75 % relative process connection lower mount (LM) DC 24 V see output signals as required

Operating conditions
Mechanics Vibration resistance: 10 g (IEC 60068-2-27, under resonance) 20 g available on request Shock resistance: 500 g (IEC 60068-2-6, mechanical) Service life: 10 million load cycles Temperatures Permissible temperature range Medium
Standard Option 0 ... +80 C

Ambient
-30 ... +100 C 0 ... +80 C

Storage
-20 ... +80 C -30 ... +100 C

-30 ... +100 C

WIKA data sheet PE 81.60 05/2011

Page 3 of 7

Process connections
Connections Standard
EN 837 G 1/8 B 1) G 1/4 B G 1/4 female G 3/8 B G 1/2 B G 1/4 A G 1/2 A M14 x 1.5 1/8 NPT 1) 1/4 NPT 1/4 NPT female 1/2 NPT M20 x 1.5 R 1/4 R 3/8 R 1/2 PT 1/4 7/16-20 BOSS O-ring 9/16-18 BOSS O-ring

Sealings Thread EN 837

Standard Option Cu Stainless steel

DIN 3852-E
NBR FKM

UNF BOSS
FKM -

The sealings listed under "Standard" are included in the delivery.

DIN 3852-E 2) ANSI/ASME B1.20.1

ISO 7 KS UNF 2) 3)

All process connections are available, as standard, with an entry bore of diameter 3.5 mm. Optional diameters for: G 1/4 A DIN 3852-E: 6 mm, 0.6 mm, 0.3 mm 1/4 NPT: 6 mm, 0.6 mm, 0.3 mm

1) Maximum measuring range 400 bar. 2) Maximum overpressure safety 600 bar 3) Maximum permissible temperature -10 ... +100 C

Electrical connections
Specifications Description
Angular connector DIN 175301-803 A
with mating connector with solid laid cable

Ingress protection
IP 65 IP 65 IP 65 IP 65 IP 67 IP 67 IP 67 IP 67

Wire cross-section
up to max. 1.5 mm2 3 x 0.75 mm2

Cable diameter
6 ... 8 mm 6 mm

Cable material
-

PUR -

Angular connector DIN 175301-803 C

with mating connector with solid laid cable

up to max. 0.75 mm2 4 x 0.75 mm2

4.5 ... 6 mm 5.9 mm -

PUR -

Circular connector M12 x 1 (4-pin)

without mating connector straight with solid laid cable

Cable outlet unshielded

angled with solid laid cable

3 x 0.34 mm2 3 x 0.34 mm2 3 x 0.34 mm2

4.4 mm 4.4 mm 4 mm

PUR PUR PUR

The stated ingress protection (per IEC 60529) only applies when plugged in using mating connectors that have the appropriate ingress protection.

Mating connectors (with and without cable) are also separately available as accessories. Cable lengths of 2 m or 5 m are available. Electrical safety Short-circuit resistance: S+ vs. 0V Reverse polarity protection: UB vs. 0V Insulation voltage: DC 500 V

Page 4 of 7

WIKA data sheet PE 81.60 05/2011

Connection diagram Angular connector DIN 175301-803 A Angular connector DIN 175301-803 C

Assignment
2-wire

with mating connector 1 with cable brown 3-wire UB

UB

0V 2 blue 0V 2 blue S+

Assignment
2-wire

with mating connector 1 with cable brown 3-wire UB

UB

0V 2 blue 0V 2 blue S+

with mating connector 1 with cable brown

3 black

with mating connector 1 with cable brown

3 black

Circular connector M12 x 1, 4-pin

Cable outlet

Assignment
2-wire

with mating connector 1 with cable brown 3-wire UB

UB

0V 3 blue 0V 3 blue S+

Assignment
2-wire

UB

0V blue 0V blue S+

brown

3-wire

with mating connector 1 with cable brown

4 black

brown

UB

black

Materials
Wetted parts Stainless steel 316L from 10 bar 316L and 13-8 PH For sealing materials see "Process connections" Pressure transmission medium Silicone oil: up to 0 ... 6 bar relative, up to 0 ... 25 bar absolute Dry measuring cell: from 0 ... 10 bar relative Non-wetted parts Stainless steel 316L HNBR PA66

Approvals, directives and certificates

Approvals cULus, GOST CE conformity EMC directive: 2004/108/EC EN 61326 emission (group 1, class B) and interference immunity (industrial application)

Pressure equipment directive: 97/23/EC

WIKA data sheet PE 81.60 05/2011

Page 5 of 7

Dimensions in mm
Pressure transmitters with angular connector form A with angular connector form C with circular connector M12 x 1 with cable outlet, PUR cable, unshielded

Weight: approx. 80 g

Weight: approx. 80 g

Weight: approx. 80 g

Weight: approx. 80 g

Process connections

G
G 1/4 A DIN 3852-E G 1/2 A DIN 3852-E M14 x 1.5 Female thread

L1
12 14 12

G
G 1/4 B EN 837 G 3/8 B EN 837 M20 x 1.5 Female thread

L1
13 16 20

G
9/16-18 UNF BOSS 7/16-20 UNF BOSS

L1
10 9

G
G 1/4 EN 837

L1
20

L2
13

L3
10

D1
25

G
1/4 NPT

L1
20

L2
14

D1
25

G
1/4 NPT 1/2 NPT R 1/4 R 3/8 R 1/2 PT 1/4 PT 3/8 PT 1/2

L1
13 19 13 15 19 13 15 19

G
G 1/ 8 B EN 837

L1
10

For information on tapped holes and welding sockets, see Technical Information IN 00.14 at www.wika.de.
Page 6 of 7 WIKA data sheet PE 81.60 05/2011

Accessories and spare parts

Mating connector Sealing for mating connector

Sealing for process connection

Mating connector Order number

without cable Angular connector DIN 175301-803 A
with cable gland, metric with cable gland, conduit

with 2 m cable 11225793 11225823 11250780 11250798

with 5 m cable 11250186 11250194 11250259 11250232

11427567 1439081 11022485

Angular connector DIN 175301-803 C Circular connector M12 x 1.5, 4-pin

straight angled

2421262 2421270

Sealings for mating connectors Order number

Angular connector DIN 175301-803 A Angular connector DIN 175301-803 C 1576240 11169479

Sealings for process connection Order number

Cu G1/4 EN 837, M12x1.5 G1/8 EN 837 G1/2 EN 837, M20x1.5 G1/4 DIN 3852-E 11250810 Stainless steel 11250844 11251042 NBR FKM -

11250861 -

11251051 -

G1/2 DIN 3852-E

1537857

1039067

1576534

1039075

Only use the accessories and spare parts listed above, otherwise it could lead to the loss of the approval. Ordering information Model / Measuring range / Output signal / Power supply / Non-linearity / Temperature range / Process connection / Sealing / Electrical connection
2011 WIKA Alexander Wiegand SE & Co. KG, all rights reserved. The specifications given in this document represent the state of engineering at the time of publishing. We reserve the right to make modifications to the specifications and materials.

05/2011 D

WIKA data sheet PE 81.60 05/2011

Page 7 of 7