Scribd Logo
Upload

Welcome to Scribd!

  • 25 views

    3 EE650170-650270-TaperedRollerBearings-TS (TaperedSingle) Imperial

    Uploaded by

    Juan Lopez
    This document provides specifications and dimensions for a tapered roller bearing with part numbers EE650170 and 650270. It includes details like the bearing weight, cage material, dimensions, load ratings, and various factors. The bearing consists of a cone (inner ring) and cup (outer ring) and is commonly used in pairs to support a shaft. It is designed for inch units.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    3 EE650170-650270-TaperedRollerBearings-TS (TaperedSingle) Imperial

    Uploaded by

    Juan Lopez
    25 views5 pages
    This document provides specifications and dimensions for a tapered roller bearing with part numbers EE650170 and 650270. It includes details like the bearing weight, cage material, dimensions, load ratings, and various factors. The bearing consists of a cone (inner ring) and cup (outer ring) and is commonly used in pairs to support a shaft. It is designed for inch units.

    Original Title

    3 EE650170-650270-TaperedRollerBearings-TS(TaperedSingle)Imperial

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications and dimensions for a tapered roller bearing with part numbers EE650170 and 650270. It includes details like the bearing weight, cage material, dimensions, load ratings, and various factors. The bearing consists of a cone (inner ring) and cup (outer ring) and is commonly used in pairs to support a shaft. It is designed for inch units.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    25 views5 pages

    3 EE650170-650270-TaperedRollerBearings-TS (TaperedSingle) Imperial

    Uploaded by

    Juan Lopez
    This document provides specifications and dimensions for a tapered roller bearing with part numbers EE650170 and 650270. It includes details like the bearing weight, cage material, dimensions, load ratings, and various factors. The bearing consists of a cone (inner ring) and cup (outer ring) and is commonly used in pairs to support a shaft. It is designed for inch units.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 5

    11/28/2022 | Page 1 of 4

    The Timken Company


    4500 Mt Pleasant St. NW
    N. Canton, OH 44720
    Phone: (234) 262-3000
    E-Mail: [email protected] • Web site: www.timken.com

    Part Number EE650170 - 650270, Tapered Roller Bearings - TS (Tapered Single) Imperial
    This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the
    cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.

    Specifications | Dimensions | Abutment and Fillet Dimensions | Basic Load Ratings | Factors

    Specifications

    Series 650000

    Cone Part Number EE650170

    Cup Part Number 650270

    Design Unit Inch

    541.00 lb
    Bearing Weight
    245.400 Kg

    Cage Material Pin-Type

    Dimensions

    17.0040 in
    d - Bore
    431.902 mm
    11/28/2022 | Page 2 of 4

    26.9960 in
    D - Cup Outer Diameter
    685.698 mm

    6.8750 in
    B - Cone Width
    174.625 mm

    5.6250 in
    C - Cup Width
    142.875 mm

    7.0000 in
    T - Bearing Width
    177.800 mm

    Abutment and Fillet Dimensions

    R - Cone Backface "To Clear" 0.25 in


    Radius1 6.4 mm

    r - Cup Backface "To Clear" 0.250 in


    Radius2 6.35 mm

    da - Cone Frontface Backing 18.54 in


    Diameter 471 mm

    db - Cone Backface Backing 18.78 in


    Diameter 477 mm

    Da - Cup Frontface Backing 25.63 in


    Diameter 648.50 mm

    Db - Cup Backface Backing 24.69 in


    Diameter 627.13 mm

    Ab - Cage-Cone Frontface 0.29 in


    Clearance 7.4 mm

    Aa - Cage-Cone Backface 0.5 in


    Clearance 12.7 mm

    -1.43 in
    a - Effective Center Location3
    -36.3 mm

    Basic Load Ratings


    11/28/2022 | Page 3 of 4

    C90 - Dynamic Radial Rating (90 270000 lbf


    million revolutions)4 1200000 N

    C1 - Dynamic Radial Rating (1 1040000 lbf


    million revolutions)5 4640000 N

    2080000 lbf
    C0 - Static Radial Rating
    9230000 N

    Ca90 - Dynamic Thrust Rating (90 150000 lbf


    million revolutions)6 669000 N

    Factors

    K - Factor7 1.8

    e - ISO Factor8 0.32

    Y - ISO Factor9 1.85

    G1 - Heat Generation Factor


    7670
    (Roller-Raceway)

    G2 - Heat Generation Factor


    341
    (Rib-Roller End)

    Cg - Geometry Factor10 0.254

    1 These maximum fillet radii will be cleared by the bearing corners.


    2 These maximum fillet radii will be cleared by the bearing corners.
    3 Negative value indicates effective center inside cone backface.
    4 Based on 90 x 106 revolutions L
    10 life, for The Timken Company life calculation method. C90 and Ca90 are
    radial and thrust values.
    5 Based on 1 x 106 revolutions L life, for the ISO life calculation method.
    10
    6 Based on 90 x 106 revolutions L
    10 life, for The Timken Company life calculation method. C90 and Ca90 are
    radial and thrust values for a single-row, C90(2) is the two-row radial value.
    7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction
    on use.
    8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction
    on use.
    11/28/2022 | Page 4 of 4

    9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction
    on use.
    10 Geometry constant for Lubrication Life Adjustment Factor a3l.
    5.6250

    0.29

    To clear 0.25 max 0.50


    Fillet Radius

    6.8750
    26.9960

    17.0040
    24.69

    18.54

    18.78

    25.63
    -1.43

    7.0000 To clear 0.25 max


    Fillet Radius

    IMPERIAL UNITS
    ISO Factor - e 0.32
    ISO Factor - Y 1.85 EE650170 - 650270
    Bearing Weight 541 lb Tapered Roller Bearings - TS (Tapered Single)
    Number of Rollers Per Row 26 Imperial
    Effective Center Location -1.43 inch

    K Factor 1.8
    Dynamic Radial Rating - C90 270000 lbf
    THE TIMKEN COMPANY Dynamic Thrust Rating - Ca90 150000 lbf
    NORTH CANTON, OHIO USA Static Radial Rating - C0 2080000 lbf
    Dynamic Radial Rating - C1 1040000 lbf

    Every reasonable effort has been made to ensure the accuracy of the information contained in this writing, but no
    liability is accepted for errors, omissions or for any other reason. FOR DISCUSSION ONLY

    You might also like