1st SUMMATIVE TEST IN EPP/ TLE-6 (Industrial Arts)

2nd Periodical Test

Name:__________________________________________________________________Score:_______________
Grade & Section:________________________________________________________ Date: _______________
Read the sentences carefully and write TRUE on the blank if the sentence is true and FALSE if it is not correct.
______1.Evaluation is the last step in any planned activity.
______2. Evaluation can be by oneself or letting others do it for you.
______3. Become conceited because you got higher mark on the finished project
______4. Accepts willingly the feedback or remarks from people who evaluated your project.
______5. The checklist, rubrics, and scorecard are used to guide to do your work/project very well.

Direction: Fill in the blank. Choose the correct answer inside the box. Write it before the
number.

Paint Varnish Gloss enamel

Non-gloss enamel Shellac Oil stains

__________1. The easiest to apply on wood is the __________.

__________ 2. This is a transparent finishing material that comes from gum, linseed oil and resin.
__________ 3. It is a kind of enamel that gives shine and has an attractive on wood.
__________ 4. A kind of varnish dries up easily and is not waterproof.
__________ 5. A finishing material commonly used on wood.

Direct Marketing, Advertising in Print Media,

Radio, Television and Internet Advertising,

Distributing Products via Transport System

II. Identify the following:

6. It is a modern way of endorsing finished products. ___________

7. This is a popular activity being done by the producers through demonstrations. ____________
8. In what kind of activity do producers put investments in promoting their products through advertisements in
newspapers, magazines and flyers. ____________.
9. This is a kind of activity through the means of land, air and sea transportation.__________.
10. One of the steps to ensure the success of the product is through ___________

III . Read the sentences carefully and write the letter of the correct answer on the line before each number.

____12. In planning your project for finished products, you must know how to be resourceful in using ______.
a. time c. money
b. materials d. all of the above
____ 13. The packaging should adhere to the rules of disposal. Waste reduction must be the top priority when it comes
to packaging. What packaging requirement does it shows?
a. durability c. disposability
b. appearance d. cost
____14. Packaging materials must withstand the distribution stresses that may be encountered. What packaging
requirements it is?
a. protection c. appearance
b. durability d. cost
____ 15 This is a marketing strategy use in promoting the finished products through the internet, e-mail and social
networking sites.
a. print media c. internet marketing
b. product display d. all of the above
 Division of City School
School District IX
EULOGIO RODRIGUEZ SR. ELEMENTARY SCHOOL
3rd District, Quezon City, Metro Manila

2nd SUMMATIVE TEST IN EPP/ TLE-6 (Industrial Arts)

2nd Periodical Test
SY 2017-2018

Name:___________________________________________Score:___________________________________

Grade & Section:__________________________________Date:___________________________________

____ 1.. Finished product can be marketed in print advertisements such as newspapers, magazines, brochures and flyers.
a. print media c. internet marketing
b. product display d. all of the above
____ 2. It refers to the proceeds earned after expenses for productions and operations are deducted.
a. sales c. income
b. profit d. capital
____3. ______ refers to the proceeds from selling the products.
a. sales c. income
b. profit d. capital
____ 4. The formula in computing income from sales is ________.
a. total income + capital = profit c. total income x capital = profit
b. total income – capital = profit d. total income /capital = profit
____5. It is a planning ideas for mass production that enhance packaging and distribution or
selling. It includes adapting to current trends.
a. budget planning c. product planning
b. market planning d. all of the above
____ 6. Used to drive in or remove screws that fasten electrical wires or other electrical accessories.
a. pliers c. wire stripper
b. screwdrivers d electric drill
____7. Ehancing decorating means _________?
a. Improving c. Decorating
b. Beautifying d. All of the above
____8. Decorating products may be done by putting_________________.
a. Drawing c. Finishes
b. Accessories d. Appearance surface
____9. One method of enhancing / decorating products includes___________.
a. Sketching c, drawing
b. Outlining d. Measuring
____10. Creating lights and dark patterns on the surface of a products is__________.
a. Shading c. Outlining
b. Drawing d. Cutting

IV. Direction: Identify the tools commonly used in household repairs.

1. _______________ 6. ___________

2. _______________ 7. ____________

3. ______________ 8. ____________

4. ______________
9. ____________

5. ______________ 10. ____________

 Division of City Schools
School District IX
EULOGIO RODRIGUEZ SR. ELEMENTARY SCHOOL
3rd District, Quezon City, Metro Manila

3rd SUMMATIVE TEST IN EPP/ TLE-6 (Industrial Arts)

2nd Periodical Test

Name:_____________________________________Score:______________________________

Grade &Section:_____________________________Date:_________________________________

Read the question Carefully and write the letter of the correct answer on the space provided
before each number.

. ______1.It is a drawing in which only the contours of a product are seen, thus emphasizing the
shape of a design.
a. sketching c. outlining
b. shading d. carving
______ 2. Free hand drawing on the surface of the product.
a. sketching c. outlining
b. shading d. carving
____ __3. It is the process of removing lint and rough edges on wood.
a. sketching c. carving
b. smoothening d. shading
______ 4. Creating shades of lights and dark patterns in a composition or design.
a. sketching c. outlining
b. shading d. carving
______ 5. It involves thinking what to do and how to go about making the project.
a. planning c. evaluating
b. monitoring d. marketing
______ 6. It is the process of checking whether the project followed the standards in making a good
quality project.
a. planning c. evaluating
b. monitoring d. marketing
______ 7. The bases for evaluating a project are the _______ found in the scorecard for judging a
finished product.
a. criteria c. standards
b. statements d. all of the above
______ 8. The part of the project plan that shows the step by step process in the construction of a
project refers to ______.
a. materials and tools c. sketching
b. procedure d. tools
______ 9. Also a part of the project plan where materials and tools are indicated.
a. materials and tools c. sketching
b. procedure d. bills of materials

_______10. In planning your project for finished products, you must know how to be resourceful in
using ______.
a. time c. money
b. materials d. all of the above
_______ 11. The packaging should adhere to the rules of disposal. Waste reduction must be the top
priority when it comes to packaging. What packaging requirement does it shows?
a. durability c. disposability
b. appearance d. cost

________12. Packaging materials must withstand the distribution stresses that may be encountered.
What packaging requirements it is?
a. protection c. appearance
b. durability d. cost
________13. This is a marketing strategy use in promoting the finished products through the
internet, e-mail and social networking sites.
a. print media c. internet marketing
b. product display d. all of the above
________14. Finished product can be marketed in print advertisements such as newspapers,
magazines, brochures and flyers.
a. print media c. internet marketing
b. product display d. all of the above
________15. It refers to the proceeds earned after expenses for productions and operations are
deducted.
a. sales c. income
b. profit d. capital
________16. ______ refers to the proceeds from selling the products.
a. sales c. income
b. profit d. capital
________17. The formula in computing income from sales is ________.
a. total income + capital = profit c. total income x capital = profit
b. total income – capital = profit d. total income /capital = profit
________18. It is a planning ideas for mass production that enhance packaging and distribution or
selling. It includes adapting to current trends.
a. budget planning c. product planning
b. market planning d. all of the above
________19. When preparing a plan for mass production, you have to consider the following
questions:
I. Is the market for the product an expanding one?
II. Does the product gives you an advantage over your competitors, such as in price,
function or use?
III. Are the raw materials sufficiently available at a reasonable amount?
a. I and II only c. II and III only
b. I and III only d. I,II and III
________20. Used to drive in or remove screws that fasten electrical wires or other electrical
accessories.
a. pliers c. wire stripper
b. screwdrivers d electric drill
 Division of City Schools
School District IX
EULOGIO RODRIGUEZ SR. ELEMENTARY SCHOOL
3rd District, Quezon City, Metro Manila

4th SUMMATIVE TEST IN EPP/ TLE-6 (Industrial Arts)

2nd Periodical Test

Name:_____________________________________Score:______________________________

Grade &Section:_____________________________Date:_________________________________

I- Multiple Choice write the letter of the correct answer on the space provided before
each number.
____ 1. The tool used to remove the insulation from a wire, usually to enable the wire to be spliced or
connected to gadgets or other electrical devices.
a. pliers c. wire stripper
b. screwdrivers d electric drill
____ 2. The tool used for bending wires in order to make loops.
a. diagonal pliers c. side-cutting pliers
b. long-nose pliers d. mechanical pliers
____ 3. This material is where you connect the male plug of your appliance in order to get electrical power.
a. flat cord c. male plug
b. doorbell d. convenience outlet
____ 4. A material used for allowing the current flow in getting electrical power.
a. switch c. male plug
b. receptacle d. convenience outlet
____ 5. It is a small electrical or electronic device with a practical use.
a. insulator c. switch
b. voltage d. gadget
____ 6. This is a simple electrical gadget where you can plug your electrical appliance in order to run.
a. extension cord c .buzzer
b. lampshade d. plugs
____ 7. An electrical device that rings when the electrical circuit is activated by the switch.
a. extension cord c. buzzer
b. lampshade d. plugs

____ 8. This is an electrical device used for lightning an area when reading or controlling the light in the room.
a. extension cord c. buzzer
b. lampshade d. plugs
____ 9. To avoid injury or electrocution, it is the best precaution to observe.
a. industry c. silence when working
b. safety precaution d. value of making electrical gadget
____ 10. In making gadgets, ________all exposed wires at the service cord.
a. used electrical tape c. loop
b. braid d. Insulate

II- Matching type: Choose from A the correct answer with column B

A B
__________1. Recycling a. Form the habit of cleaning
__________2. Sort b. Identify and eliminate unnecessary items
__________3. Sustain c. Put all needed materials and tools in order
__________4. Standardize d. Clean the work place
__________5. Sweep e. Maintain quality cleanliness
__________6.Systematize/Set in Order. f. Reduce, ruse. Recycle
__________7. Three RS (3 Rs_) g. Cell phones, computer, TV, DVD
__________8. Electric waste appliances
__________9. Municipal solid waste h. Garbage from home
__________10. Construction and demolition waste i. Concrete, wood metal, plastic doors
j. To transform into something usable

Prepared by:
Amado Cadiong
Teacher - I
Division of City Schools
School District IX
EULOGIO RODRIGUEZ SR. ELEMENTARY SCHOOL
3rd District, Quezon City, Metro Manila

5th SUMMATIVE TEST IN EPP/ TLE-6 (Industrial Arts)

2nd Periodical Test

Name:_____________________________________Score:______________________________

Grade &Section:_____________________________Date:_________________________________

DIRECTION: Identify the following. Write your answer on the blank provided. Choose the answer from
the circle below.

1.A tool used to guide in drawing vertical and obligue lines.______________________

2. It is made of wood,metal or plastic that is used to guide in drawing horizontal lines. _________________________
3. A continuous mark made on a surface and connects a point into another. __________________________
4. It is used in drawing arcs and circles. __________________________
5. It is made of wood, measuring 26 x 22 or 18 x 24 inches.____________________

T-SQUARE- COMPASS -DRAWING TABLE –TRIANGLES -DRAWING

II. DIRECTION; Fill in the blank with TRUE or FALSE.

____________1. We need to consider the benefits that we can get out of the product.

____________2. We have to prepare the tools and equipment needed.

____________3. Choose the materials that are expensive.

____________4. You need to make a plan before doing the project.

____________5. Just use the materials available in your house.

III. DIRECTION; Match column A with column B.

A B

____1. Prevents moisture on the woods w/,c cause decay. A. sketching

_____2. GIive the wood a shiny glow. B sand paper

_____3. It refinish furnitures . C. varnish

_____4. Is a process by which an image is drawn in a loose manner. D .paint

_____5. Is a process of making on the outer parts of any shape

Objects or any figure by the use of lines. E. Outlining

IV. DIRECTION: Arrange the jumbled word to form a new word. ( Tools used in sketching,drawing,shading and outlining.

1. NEPSILS ________________ 4. VIDIRED _________________

2. PASSMOC _______________ 5. SELGNAIRT ________________

3. CARTROTORP ____________

Prepared by:
AMADO M. CADIONG
TEACHER - I