Valves 2/2 E290: Pressure Operated Bronze or Stainless Steel Body Threaded Ports, 3/8 To 2 1/2

VALVES
2/2
E290
NC
pressure operated
bronze or stainless steel body
threaded ports, 3/8 to 2 1/2
Series
NO
2
FEATURES
High flow due to angled seat design

Anti-waterhammer design (fluid entry under the disc)
Vacuum operation up to 10-2 mbar
Wide range of piston-type operators (32 - 50- 63 - 90 -125 mm dia.) rotatable
through 360, for maximum performance at different minimum pilot pressures
High performance, maintenance-free stuffing box
The valves satisfy Pressure Equipment Directive 97/23/EC, category 1 (DN > 25)
or article 3.3 (DN 25)
GENERAL
Differential pressure
Maximum allowable pressure
Ambient temperature range
Maximum viscosity
Pilot fluid
Max. pilot pressure
Min. pilot pressure
Pilot fluid temperature
Response time
See SPECIFICATIONS [1 bar =100 kPa]

16 bar
-10C to +60C
600 cSt (mm2/s)
Filtered air or water (1)
10 bar
See below and following page
-10C to +60C
See page V402-7
fluids ()
temperature range
disc seal ()
DN 50: air and gas groups 1 & 2

DN 65: air and gas group 2
all DN: water, oil, liquids groups 1 & 2 and steam
- 10C to + 184C
PTFE
D
1
MATERIALS IN CONTACT WITH FLUID
() Ensure that the compatibility of the fluids in contact with the materials is verified
Bronze body
Stainless steel body
Valve body
Bronze
AISI 316L
Stuffing box housing
Brass
AISI 316L
Stem
Stainless steel
Stainless steel
Disc
Brass
Stainless steel
Stuffing box packing
PTFE chevrons
PTFE chevrons
Wiper seal
FPM
FPM
Disc seal
PTFE
PTFE
Valve body seal
PTFE
PTFE
NC function, entry under the disc, 32 and 50 mm operators
OTHER MATERIALS
Operator
Optical position indicator
(1)
Glass fibre filled PA

PA 12, supplied standard on valves with 63, 90
and 125 mm operators
For dia. 32, 50, 63, 90 and 125 mm operators: At service fluid temperatures inside the valve body above
100C, it is prohibited to pilot the valve with water.
NC function, entry under the disc, 63, 90 and 125 mm operators
00049GB-2010/R03
Availability, design and specifications are subject to change without notice. All rights reserved.
SPECIFICATIONS
piping
(ISO 6708)
pipe
size
DN
flow
coefficient
Kv
(m3/h) (l/min)
(G*)
pilot
pressure
(bar)
min.
operating pressure
differential (bar)
min.
max.
NC - Normally closed, entry under the disc

3/8
10
1/2
15
3/4
20
25
2,8
4,1
4,9
82
6,5
108
9,4
157
12,8
213
16,5
275
27
1 1/4
47
68
10
10
10
10
10
0
0
0
0
0
10
2,5
4
10
10
0
0
10
2,5
10
10
2,5
10
4
2,5
10
10
0
0
450
32
29
4
4
4
2,5
4
483
catalogue
number
operator
diameter
air, inert gas,

aggressive fluids
max.
water, oil, liquids,
aggressive liquids
()
()
()
(184C)
(mm)
16
12
16
16
6
10
16
12
6
10
16
6
12
6
12
3
7
16
16
16
12
16
16
6
10
16
12
6
10
16
6
12
6
12
3
7
16
16
10
10
10
10
6
10
10
10
6
10
10
6
10
6
10
3
7
10
10
32
32
50
63
32
50
63
63
50
63
90
63
90
63
90
63
90
125
125
steam
bronze
stainless steel
E290A384
E290B002
E290A385
E290B005
E290B004
E290A386
E290B010
E290B011
E290B008
E290B009
E290A016
E290A017
E290A014
E290A015
E290A642
E290A641
E290A791
E290A792
E290A393
E290B045
E290A793
E290A394
E290B048
E290B047
E290A395
E290B053
E290B054
E290B051
E290B052
E290A059
E290A060
E290A057
E290A058
E290A646
E290A645
(1)
All leaflets are available on: www.asconumatics.eu

V410-1
VALVES SERIES E290

SPECIFICATIONS
piping
(ISO 6708)
pipe
size
DN
flow
coefficient
Kv
(m3/h) (l/min)
(G*)
pilot
pressure
(bar)
min.
operating pressure
differential (bar)
min.
max.
catalogue
number
operator
diameter
air, inert gas,

aggressive fluids
max.
water, oil, liquids,
aggressive liquids
()
()
()
(184C)
(mm)
4
8
4
16
10
2,5
6
2,5
10
5
2
6
4
8
4
16
10
2,5
6
2,5
10
5
2
6
4
8
4
10
10
2,5
6
2,5
10
5
2
6
16
16
16
16
16
16
16
16
16
16
16
16
16
11
16
16
7
13
16
7
16
16
16
16
16
16
16
16
16
16
16
16
16
16
11
16
16
7
13
16
7
16
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
7
10
10
7
10
steam
bronze
stainless steel
63
90
90
125
125
63
90
90
125
125
90
125
E290A020
E290A021
E290A019
E290A482
E290A481
E290A024
E290A025
E290A023
E290A485
E290A484
E290A487
E290A488
E290A063
E290A064
E290A062
E290A495
E290A494
E290A067
E290A068
E290A066
E290A498
E290A500
E290A501
32
32
50
63
32
50
63
50
63
90
63
90
125
63
90
125
63
90
125
90
125
E290A387
E290B026
E290A388
E290B027
E290A389
E290B028
E290B029
E290A030
E290A031
E290A643
E290A032
E290A033
E290A489
E290A034
E290A035
E290A490
E290A491
E290A492
E290A794
E290A795
E290A396
E290B069
E290A796
E290A397
E290B070
E290B071
E290B072
E290A073
E290A074
E290A647
E290A075
E290A076
E290A502
E290A077
E290A078
E290A503
E290A504
E290A505
NC - Normally closed, entry under the disc (1)

45
1 1/2
2 1/2
750
40
48
800
59
983
66
1100
94
111
1567
1850
50
65
10
2,5
4
2,5
10
10
10
0
0
0
10
2,5
4
2,5
4
4
10
10
10
10
10
0
0
0
0
0
NO - Normally open, entry under the disc

3/8
10
1/2
15
3/4
20
25
1 1/4
32
1 1/2
40
50
2 1/2
65
2,8
4,1
47
68
4,9
82
6,5
108
9,4
157
12,8
213
16,5
275
27
450
29
483
45
750
48
800
59
983
66
94
111
1100
1567
1850
IX ()
IX ()
I ()
II ()
IX ()
I ()
II ()
I ()
II ()
III ()
II ()
III ()
IV ()
II ()
III ()
IV ()
II ()
III ()
IV ()
III ()
IV ()
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
3/8
10
1/2
15
3/4
20
2,8
4,1
47
68
4,9
82
6,5
108
9,4
157
213
275
25
12,8
16,5
1 1/4
32
27
450
1 1/2
40
45
750
50
59
983
65
94
111
1567
1850
2 1/2
X ()
X ()
V ()
VI ()
X ()
V ()
VI ()
V ()
VI ()
VI ()
VII ()
VI ()
VII ()
VI ()
VII ()
VII ()
VIII ()
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
10
10
10
10
10
10
10
10
10
10
10
10
10
9
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
9
10
10
10
32
32
50
63
32
50
63
50
63
63
90
63
90
63
90
90
125
E290A390
E290B036
E290A391
E290B037
E290A392
E290B038
E290A039
E290A136
E290A040
E290A041
E290A042
E290A043
E290A623
E290A624
E290A797
E290A798
E290A399
E290B079
E290A799
E290A400
E290B080
E290A401
E290B081
E290A082
E290A137
E290A083
E290A084
E290A085
E290A086
E290A625
-
() Minimum pilot pressure varies with differential pressure, see page V402-7.
(1)
Calculation of the minimum pilot pressure at a P of max. 10 bar with allowable backpressure (backpressure not recommended with liquids as waterhammer may
occur).
- 32 and 50 mm operators, 4 bar minimum pilot pressure version: add 2 bar to the minimum pilot pressure of chart V or X, page V402-7.
- 63, 90 and 125 mm operators, 4 bar minimum pilot pressure version: add 1,5 bar to the minimum pilot pressure of chart VI, VII or VIII, page V402-7.

V410-2
00049GB-2010/R02
NC - Normally closed, entry above the disc (version recommended for rapid-cycling steam applications)
VALVES SERIES E290

OPTIONS AND ACCESSORIES (see page V435/V436)
Signaling box or compact signaling unit

Stroke limiter for opening
Manual safety device
Optical position indicator on 32-50 mm operators, NC function
Adapter plate for NAMUR pad mounting pilot (63-90-125 mm operators only)
Oxygen service (except DN 65), pressure limited to 15 bar, temperature limited to + 60C
Vacuum applications up to 1,33 10-3 mbar
NET-INOX passivation treatment on stainless steel body valve
All AISI 316L version with NET-INOX passivation treatment
ATEX 94/9/EC versions for potentially explosive atmospheres
Pilot operated drain valve assembly with electronic timer (see Solenoids, Coils & Accessories section)
Other pipe connections are available on request
INSTALLATION
The valves can be mounted in any position without affecting operation

Compatible with ASTM 1, 2 and 3 oils
Pipe connections (G*) have standard combination thread according to ISO 228/1 and ISO 7/1
Installation/maintenance instructions are included with each valve
E
E
E
E
spare parts kit no.

DN
10
15
20
25
32
40
50
65
ORDERING EXAMPLES:
SPARE PARTS KITS

32 mm
50-63-90-125 mm
C140100
C140101
C140102
-
C131204 (1)
C131205 (1)
C131206 (1)
C131207 (1)
C131208 (1)
C131209 (1)
C131622 (1)
290 A 792
290 B 002 SM2
290 A 791 SU
290 A 082
pipe thread
basic number
suffix
ORDERING EXAMPLES KITS:
(1)
Standard suffix VM also applies to kits (see V435).
- Not available
C140100
C140205
C140205
VM
suffix
basic number
32 mm operator
50 mm operator
63, 90 and 125 mm operators
00049GB-2010/R01
1
2
NO function
1
2
NC function, fluid entry above disc

V410-3
VALVES SERIES E290

DIMENSIONS (mm), WEIGHT (kg)
TYPE 01-02
32 and 50 mm operators
Fluid entry:
under the disc at 2
above the disc at 1
F
1/8
50
36
type
operator
diameter
01
32 mm
02
50 mm
(1)
weight (1)
3/8
1/2
3/4
1/2
3/4
1
92
99
107
142
150,5
155
93
97
104,5
154,5
159
165
81,5
83,5
88
141
143
145
55
65
75
65
75
90
43,5
43,5
43,5
69
69
69
27
27
27
43
43
43
23,5
28
30
27
32
41
0,35
0,4
0,45
0,9
1
1,4
Weight of valve without pilot.

Solenoid pilot valves: see V440 (32 and 50 mm operators).
TYPE 03-04-05
63, 90 and 125 mm operators
Fluid entry:
under the disc at 2
above the disc at 1
158
156
36
C
D
1/8 (63 mm)

1/4 (90-125 mm)
E
B
Operator dia. 125 mm, NO function
type
(1)
operator
diameter
03
63 mm
04
90 mm
05
125 mm
A
1/2
3/4
1
1 1/4
1 1/2
2
1
1 1/4
1 1/2
2
2 1/2
1 1/4
1 1/2
2
2 1/2
170 182 169

175 185 170
179 192 172
217 229 204
224 245 215
249 259 224
197 209 189
236 246 221
243 262 232
267 276 241
299 300 257
284 298 273
291 313,5 283,5
315 328 293
347 352 308
weight (1)
65
75
90
110
120
150
90
110
120
150
190
110
120
150
190
85
85
85
85
85
85
118
118
118
118
118
156
156
156
156
50,5
50,5
50,5
50,5
50,5
50,5
67
67
67
67
67
86
86
86
86
27
32
41
50
60
70
41
50
60
70
86
50
60
70
86
1,2
1,3
1,7
2,1
2,9
3,7
2,3
2,7
3,5
4,3
6,3
5,2
6
6,8
8,9
Weight of valve without pilot. Add 0,2 for dia. 125 mm operator NO.
Solenoid pilot valves: see V439 (63 mm operator) / V444 (90 and 125 mm operators).

V410-4
00049GB-2009/R01
50

Valves 2/2 E290: Pressure Operated Bronze or Stainless Steel Body Threaded Ports, 3/8 To 2 1/2

Uploaded by

Copyright:

Available Formats

Valves 2/2 E290: Pressure Operated Bronze or Stainless Steel Body Threaded Ports, 3/8 To 2 1/2

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Valves 2/2 E290: Pressure Operated Bronze or Stainless Steel Body Threaded Ports, 3/8 To 2 1/2

Uploaded by

Copyright:

Available Formats

VALVES

High flow due to angled seat design

See SPECIFICATIONS [1 bar =100 kPa]

DN 50: air and gas groups 1 & 2

MATERIALS IN CONTACT WITH FLUID

NC function, entry under the disc, 32 and 50 mm operators

Glass fibre filled PA

NC function, entry under the disc, 63, 90 and 125 mm operators

NC - Normally closed, entry under the disc

air, inert gas,

All leaflets are available on: www.asconumatics.eu

VALVES SERIES E290

air, inert gas,

NC - Normally closed, entry under the disc (1)

NO - Normally open, entry under the disc

All leaflets are available on: www.asconumatics.eu

VALVES SERIES E290

Signaling box or compact signaling unit

The valves can be mounted in any position without affecting operation

spare parts kit no.

SPARE PARTS KITS

ORDERING EXAMPLES KITS:

63, 90 and 125 mm operators

NC function, fluid entry above disc

All leaflets are available on: www.asconumatics.eu

VALVES SERIES E290

Weight of valve without pilot.

1/8 (63 mm)

Operator dia. 125 mm, NO function

170 182 169

All leaflets are available on: www.asconumatics.eu

You might also like