Scribd Logo
Upload

Welcome to Scribd!

  • 122 views

    Tire and Rim (Rear) - Remove and Install - 2

    Uploaded by

    Carlos
    TIRES

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Tire and Rim (Rear) - Remove and Install - 2

    Uploaded by

    Carlos
    122 views4 pages
    TIRES

    Original Title

    Tire and Rim (Rear) - Remove and Install_2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    TIRES

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    122 views4 pages

    Tire and Rim (Rear) - Remove and Install - 2

    Uploaded by

    Carlos
    TIRES

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Media Search - KENR6490 - 836K Landfill Compactor, 834K Wheel Dozer and 988...

    Page 1 of 4

    Shutdown SIS

    Previous Screen

    Product: NO EQUIPMENT SELECTED


    Model: NO EQUIPMENT SELECTED
    Configuration: NO EQUIPMENT SELECTED

    Disassembly and Assembly


    836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader Power Train
    Media Number -KENR6490-08 Publication Date -01/09/2015 Date Updated -27/04/2020

    i07686237

    Tire and Rim (Rear) - Remove and Install


    SMCS - 4202-010-RE

    Removal Procedure
    Table 1
    Required Tools
    Tool Part Number Part Description Qty
    9U-7536 Lift Stand 2
    A(1) 447-0910 Electric Hydraulic Pump (115 V) 1
    447-0911 Electric Hydraulic Pump (230 V) 1
    OR
    A1 504-9826 Lift Gp (50/60 Hz)(2) 2
    504-9827 Lift Gp (50/60 Hz)(3) 2
    (1)
    Use Tooling (A) or (A1) based on requirements.
    (2)
    Operating-Voltage (380-500V)
    (3)
    Operating-Voltage (180-300V)

    Start By:

    a. Connect the steering frame lock.

    Follow the recommended procedure for removal and installation of tires


    and or wheel assemblies.

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 24/04/2022
    Media Search - KENR6490 - 836K Landfill Compactor, 834K Wheel Dozer and 988... Page 2 of 4

    Ensure that the machine and tire and or wheel assembly are properly
    supported at all times.

    Improper procedures that are used to remove and install tires and or
    wheel assemblies can result in personal injury or death.

    Improper blocking of the rear axle housing can cause personal injury.

    The rear axle housing is made to oscillate. During removal and


    installation of the rear tires and rims, the rear axle housing must be
    prevented from oscillating.

    Place wood blocks between the rear axle housing and the rear main
    frame to prevent oscillation of the rear axle housing.

    1. Lower the bucket to the ground.

    Illustration 1 g00683293

    2. Place suitable chocks in front of the front tires and behind the front tires, as shown.

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 24/04/2022
    Media Search - KENR6490 - 836K Landfill Compactor, 834K Wheel Dozer and 988... Page 3 of 4

    Illustration 2 g00367854

    3. Place suitable block (2) between axle housing (3) and rear main frame (1) on both sides of
    the machine, as shown. This will prevent the rear axle housing from oscillating.

    Illustration 3 g00683052
    For Tooling (A)

    4. Position Tooling (A) under the rear frame, as shown. Make sure that Tooling (A) is
    positioned under the frame rails.

    5. Use Tooling (A) to raise the rear of the machine until the tires are off the ground. Lock
    Tooling (A) in position.

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 24/04/2022
    Media Search - KENR6490 - 836K Landfill Compactor, 834K Wheel Dozer and 988... Page 4 of 4

    Illustration 4 g06395374
    Typical example
    For Tooling (A1)

    6. Position Tooling (A1) under the rear frame, as shown. Make sure that Tooling (A1) is
    positioned under the frame rails. Refer to Tool Operating Manual, NEHS1328, "Lift Group
    (Stand - 60 Ton)" for more information on Tooling (A1).

    7. Use Tooling (A1) to raise the rear of the machine until the tires are off the ground. Lock
    Tooling (A1) in position.

    Illustration 5 g00367856

    8. Attach a suitable lifting device to tire (4), as shown.

    9. Remove bolts (5) from the rim.

    Note: Do not damage the valve stem when the tire and the rim are removed.

    10. Use a suitable lifting device to remove tire (4) and the rim as a unit. The combined weight
    of the tire and of the rim is approximately 1590 kg (3500 lb).

    11. Repeat this procedure for the other rear tire.

    Installation Procedure
    1. Install tire (4) and the rim in the reverse order of removal.

    a. Tighten bolts (5) to a torque of 570 ± 80 N·m (420 ± 60 lb ft). Turn bolts (5) an extra
    60 ± 5 degree.

    Copyright 1993 - 2022 Caterpillar Inc. Sun Apr 24 21:06:22 EST 2022
    All Rights Reserved.
    Private Network For SIS Licensees.

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 24/04/2022

    You might also like