C-SGS-6341 Series - L
C-SGS-6341 Series - L
C-SGS-6341 Series - L
Stacking Features
• IP Stacking
–– Connects with stack member via Gigabit TP, SFP and 10G
SFP+ interfaces
–– Single IP address management, supporting up to 24 IP
units stacked together
• Hardware Stacking
–– Virtualized multiple SGS-6341 series stacked into one
logical facility
–– Connects with stack members via assigned 10G SFP+
interfaces
Powerful 10Gbps and Layer 3 Routing Solution for Enterprise Backbone
–– Single IP address stack management, supporting up to 4
and Data Center Networking
hardware units stacked together
PLANET SGS-6341 series is a Layer 3 Stackable Managed Gigabit Switch
–– Stacking architecture supports redundant Ring mode
that provides high-density performance, Layer 3 static routing, RIP (Routing
Information Protocol) and OSPF (Open Shortest Path First). With 10Gbps uplink
interfaces and switch stacking capability, the SGS-6341 series can handle extremely
IP Routing Features
large amounts of data in a secure topology linking to an enterprise backbone or high- • IP routing protocol supports RIPv1/v2, RIPng, OSPFv2/v3,
capacity servers. The powerful multicast routing and network security features make the BGP4/4+
SGS-6341 series perform effective data traffic control for ISP and enterprise VoIP, video • Routing interface provides per VLAN routing mode
streaming, and multicast applications. • VRRPv1/v3 protocol for redundant routing deployment
The hardware specifications of these models are shown below: • Supports route redistribution
10/100/1000T 100/1000X 1000/10G PoE Power • Supports hardware-based wire-speed VLAN routing
Models
Copper SFP SFP+ Ports Input
SGS-6341-24T4X 24 -- 4 -- AC
SGS-6341-24P4X 24 4 (combo) 4 24 AC
Multicast Routing Features
SGS-6341-16S8C4XR 8 (combo) 24 4 -- AC + DC • Supports PIM-DM (Protocol Independent Multicast – Dense
SGS-6341-48T4X 48 -- 4 -- AC
Mode) and PIM-SM (Protocol Independent Multicast – Sparse
Mode) and PIM-SSM (Protocol Independent Multicast – Source
Specific Multicast)
• Supports DVMRP (Distance Vector Multicast Routing Protocol)
• Supports IGMP v1/v2/v3 and MLD v1/v2
Layer 2 Features
• High performance Store-and-Forward architecture, broadcast
storm control, port loopback detection
• 16K MAC address table, automatic source address learning
1
SGS-6341 Series
Quality of Service
Slave Slave
• 8 priority queues on all switch ports
High Reliability Hardware Stacking • Support for strict priority and WRR (Weighted Round Robin)
Two of the 10G SFP+ ports can be configured to connect several SGS-6341 series for CoS policies
building a virtually logical facility. The SGS-6341 series gives the enterprises, service • Traffic classification
providers and telecoms flexible control over port density, uplinks and switch stack –– IEEE 802.1p CoS/ToS
performance. The SGS-6341 series can connect as a ring for redundancy and ensures
–– IPv4/IPv6 DSCP
that data integrity is retained even if one switch in the stack fails. You can even hot-swap
–– Port-based WRR
switches without disrupting the network, which greatly simplifies the tasks of upgrading
• Strict priority and WRR CoS policies
the LAN for catering to increasing bandwidth demands.
Standby Master
Security
Slave
• IEEE 802.1x port-based network access authentication
Slave
• MAC-based network access authentication
• Built-in RADIUS client to cooperate with the RADIUS servers
for IPv4 and IPv6
Redundant Ring, Fast Recovery for Critical Network Applications • TACACS+ login users access authentication
The SGS-6341 series supports redundant ring technology and features strong, rapid • IP-based Access Control List (ACL)
self-recovery capability to prevent interruptions and external intrusions. It incorporates • MAC-based Access Control List
advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology and • Supports DHCP snooping
Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system
• Supports ARP inspection
reliability and uptime in harsh environments. In a certain simple Ring network, the
• IP Source Guard prevents IP spoofing attacks
recovery time could be less than 50ms to quickly bring the network back to normal
• Dynamic ARP Inspection discards ARP packets with invalid
operation.
MAC address to IP address binding
2
SGS-6341 Series
Enterprise Branch
Management
Headquarters
SGS-6341-16S8C4XR • Management IP for IPv4 and IPv6
10G • Switch Management Interface
–– Console/Telnet Command Line Interface
SGS-6341 Series
–– Web switch management
10G
ERPS Ring for Metropolitan Area Network Application –– SNMP v1, v2c, and v3 switch management
Recovery Time < 10ms
–– SSH/SSL secure access
10G
• BOOTP and DHCP for IP address assignment
• Firmware upload/download via TFTP or HTTP Protocol for
SGS-6341-24P4X
10G
Enterprise Branch IPv4 and IPv6
• SNTP (Simple Network Time Protocol) for IPv4 and IPv6
SGS-6341-24T4X • User privilege levels control
Enterprise Branch
• Syslog server for IPv4 and IPv6
Layer 3 Routing Support • Supports DDM
The SGS-6341 series enables the administrator to conveniently boost network efficiency
• Four RMON groups 1, 2, 3, 9 (history, statistics, alarms and
by configuring Layer 3 static routing manually, the RIP (Routing Information Protocol) or
events)
OSPF (Open Shortest Path First) settings automatically.
• Supports sFlow
► The RIP can employ the hop count as a routing metric and prevent routing loops
• Supports ULDP
by implementing a limit on the number of hops allowed in a path from the source
• Supports ULPP (Uplink Protection Protocol)
to a destination.
• Supports ULSM (Uplink State Monitor protocol)
► The OSPF is an interior dynamic routing protocol for autonomous system based
on link state. The protocol creates a database for link state by exchanging link • Supports LLDP/LLDP MED
states among Layer 3 switches, and then uses the Shortest Path First algorithm to • Supports DHCP Option82, Option37/38
generate a route table based on that database. • Supports ping, trace route function for IPv4 and IPv6
Full IPv6 Support • Circuit protection prevents power interference between ports
The SGS-6341 series provides IPv6 management and enterprise-level secure features • Remote power feeding up to 100 meters
such as SSH, ACL, WRR and RADIUS authentication. It thus helps the enterprises to • PoE management
step in the IPv6 era with the lowest investment. In addition, you don’t need to replace –– Total PoE power budget control
the network facilities when the IPv6 FTTx edge network is built. –– Per port PoE function enable/disable
–– PoE port power feeding priority
Robust Layer 2 Features
–– Per PoE port power limitation
The SGS-6341 series can be programmed for basic switch management functions such
–– PD classification detection
as port speed configuration, port aggregation, VLAN, Multiple Spanning Tree Protocol,
–– PoE schedule
bandwidth control and IGMP snooping. This switch provides 802.1Q tagged VLAN,
Q-in-Q, voice VLAN and GVRP Protocol functions. By supporting port aggregation, the
SGS-6341 series allows the operation of a high-speed trunk combined with multiple
Redundant Power System (SGS-6341-16S8C4XR)
ports. It enables up to 16 groups for trunking with a maximum of 8 ports for each group. • 100~240V AC / 11-13V DC Dual power redundant
• Active-active redundant power failure protection
MSTP LACP
• Backup of catastrophic power failure on one supply
Q-in-Q QoS LLDP
MLD IGMP
L2/L4 L2/L4
Managed Switch Managed Switch
3
SGS-6341 Series
SGS-6341 Series
01010101010110010101010100010101010
01010101010110010101010100010101010
01010101010110010101010100010101010
Computer
6
4 8
2 10
Ammeter
0 12 30
V
20 40
10 50
0 60
mA
Temperature
50
25 75
0 100
°C
SGS-6341 Series
0
−20 20
−40 40
−60 60
dBm
0
−20 20
−40 40
−60 60
Power Transmit
dBm
Power Receiver 4
SGS-6341 Series
The SGS-6341-24P4X’s PoE capabilities also help to reduce deployment costs for network devices as a result of freeing from the restrictions of power outlet locations.
Power and data switching are integrated into one unit, delivered over a single cable and managed centrally. It thus eliminates the cost for additional AC wiring and
reduces installation time.
Applications
Excellent Solution to Enterprise Security and QoS Switch
The SGS-6341 series performs 128/178 Gigabits per second non-blocking switch fabric, so it can easily provide a local 10Gbps high bandwidth Ethernet
network for the backbone of your department. With the four built-in SFP+ ports, the SGS-6341 series provides the uplink to the backbone network through
the 10G Ethernet LR/SR SFP+ modules. It further improves the network efficiency and protects the network clients by offering the security and QoS features.
10G NIC
10G 10G
SGS-6341 Series
1G Communication
10G 10GBASE-SR/LR Fiber-optic
1000BASE-T UTP 5
SGS-6341 Series
protocols can be applied via VLAN interface. The SGS-6341 series is certainly a cost-effective and ideal solution for enterprises.
17F
l.: F
in
VL ance D
AN
100 epartm
Do e 20F
ma nt l.: S
in B a
192 VL les De
450m AN p
. 300 artme
1000
168
.10 Do nt
.x/2 ma
4 in A
1000 550m 192
.16
8.3
0.x
/24
10G
1000
NA
S 200m
Co Ser Stora
ntro ver ge
l Ce Ra
VL nte ck
AN r
1D
om
ain
192 4Fl
.16 .: M
8.0 K
.x SGS-6341 Series VL T Dep
AN a
200 rtmen
Do t
ma
in C
192
.16
8.2
0.x
1000 1000BASE-SX/LX Fiber-optic /24
10G 10GBASE-SR/LR Fiber-optic
fiber interface and the transmission distance can be extended to 120km. The SGS-6341 series features strong, rapid, self-recovery capability to prevent
interruptions and external intrusions. It incorporates IEEE 802.1s MSTP (Multiple Spanning Tree Protocol, spanning tree by VLAN) into customer’s
automation network to enhance system reliability and uptime. The SGS-6341 series is the ideal solution for data centers, service providers and telecoms to
build redundant connection and establish high bandwidth for Big Data server farm.
Enterprise Center
SGS-6341 Series
1000
10G
1000
10G
10G
10G
Edge Switch
1000BASE-T UTP
Enterprise Branch
10G 10GBASE-SR/LR Fiber-optic
6
SGS-6341 Series
Specifications
Product SGS-6341-24T4X SGS-6341-24P4X SGS-6341-16S8C4XR SGS-6341-48T4X
Hardware Specifications
Hardware Version 2 2 2 1
10/100/1000 RJ45 Ports 24 24 8 (combo) 48
100/1000BASE-X SFP Ports -- 4 (combo) 24 -
4 10GBASE-SR/LR SFP+ interface
10G SFP+ Ports
Backward compatible with 1000BASE-SX/LX/BX SFP transceiver
Management Port 1 x 10/100/1000BASE-T RJ45 port
Console Port 1 x RJ45-to-RS232 serial port (115200, 8, N, 1)
USB Port 1 x USB 2.0 for switch configuration backup and resoter
CPU ARM A9 800MHz
RAM 512Mbytes
Flash Memory 128Mbytes
Dimensions (W x D x H) 440 x 240 x 43.6 mm 440 x 320 x 43.6mm 440 x 240 x 43.6 mm 440 x 240 x 43.6mm
Weight 3170g 4503g 3170g 3471g
15.4 watts/
26 watts/ 52.51BTU (System)
Power Consumption 34 watts/116BTU 46.4 watts/158.22 BTU
88.66 BTU 401.7 watts/
1369.8 BTU (System+PoE)
Power Requirements- AC AC 100~240V, 50/60Hz AC 100~240V, 50/60Hz AC: 100~240V, 50/60Hz AC 100~240V, 50/60Hz
Power Requirements - DC -- -- DC: 36~72V --
Fan 1 2 1 1
PWR, MGMT, SYS PWR, MGMT, SYS, PoE PWR, MGMT, SYS PWR, MGMT, SYS
- 10/100/1000T RJ45 Port: - 10/100/1000T RJ45 Port: - 10/100/1000T RJ45 Port: - 10/100/1000T RJ45 Port:
LED LNK/ACT LNK/ACT and PoE-in-Use LNK/ACT LNK/ACT
-1/10G SFP+ Port: LNK/ - 1/10G SFP+ Port: LNK/ - 1/10G SFP+ Port: LNK/ - 1/10G SFP+ Port: LNK/
ACT ACT ACT ACT
Switching Specifications
Switch Architecture Store-and-forward
Switch Fabric 128Gbps/non-blocking 176Gbps/non-blocking
Switch Throughput 95.23Mpps 130.95Mpps
Address Table 16K MAC address table with auto learning function
ARP Table 4K
Routing Table 1024 (IPv4 + IPv6)
IP Interface 1024
ACL Table 1024
Shared Data Buffer 1.5MB
Jumbo Frame 10KBytes
Back pressure for half duplex
Flow Control
IEEE 802.3x pause frame for full duplex
Power over Ethernet Specifications
PoE Standard -- IEEE 802.3at PoE+ PSE -- --
PoE Power Supply Type -- End-span -- --
Per port 53V DC,
PoE Power Output -- -- --
30.8 watts (max.)
Power Pin Assignment -- 1/2(+), 3/6(-) -- --
PoE Power Budget -- 370 watts (max.) -- --
IPv4 Layer 3 Functions
■ Static route
■ RIPv1/v2
■ OSPFv2
IP Routing Protocol ■ BGPv4
■ Policy-based routing (PBR)
■ LPM routing (MD5 authentication)
■ Hardware-based Layer 3 routing
■ IGMP v1/v2/v3
■ DVMRP
Multicast Routing Protocol
■ PIM-DM/SM
■ PIM-SSM
7
SGS-6341 Series
■ VRRP v1/v3
■ ARP
Layer 3 Protocol
■ ARP Proxy
■ IGMP Proxy
IPv6 Layer 3 Functions
■ RIPng
■ OSPFv3
■ BGPv4+
■ IPv6 LPM Routing
IP Routing Protocol ■ IPv6 Policy-based Routing (PBR)
■ IPv6 VRRPv3
■ IPv6 URPF
■ IPv6 RA
■ Hardware-based Layer 3 routing
■ PIM-SM/DM for IPv6
■ MLD for IPv6 (v1)
■ MLDv1/v2
Multicast Routing Protocol ■ MLD Snooping, 6 to 4 Tunnels
■ IPv6 Any Cast RP
■ Multicast receive control
■ Illegal multicast source detect
■ Configured Tunnels
Layer 3 Protocol ■ ISATAP
■ GRE Tunnel
Other ICMPv6,ND,DNSv6
Layer 2 Functions
Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Port Configuration Flow control disable/enable
Bandwidth control on each port
Port loopback detect
Port Status Display each port’s speed duplex mode, link status, flow control status and auto negotiation status
802.1Q tagged VLAN, up to 4K VLAN groups
802.1ad Q-in-Q (VLAN stacking)
GVRP for VLAN management
VLAN Private VLAN Edge (PVE) supported
Protocol-based VLAN
MAC-based VLAN
IP subnet VLAN
STP, IEEE 802.1D (Classic Spanning Tree Protocol)
RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)
Spanning Tree Protocol
MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN)
Supports BPDU and root guard
IGMP v1/v2/v3 snooping
Querier mode support
Multicast MLD v1/v2 snooping
Multicast VLAN Register (MVR)
Up to 4K multicast groups (IPv4 + IPv6)
IEEE 802.3ad LACP/static trunk
Link Aggregation
Supports 12 groups with 8 ports per trunk group
TX/RX/Both
Bandwidth Control
At least 64Kbps step
8 priority queues on all switch ports
Supports strict priority and Weighted Round Robin (WRR) CoS policies
Traffic classification:
QoS
- IEEE 802.1p CoS/ToS
- IPv4/IPv6 DSCP
- Port-based WRR
Ring Supports ITU-G G.8032 ERPS
Security Functions
Supports Standard and Expanded ACL
IP-based ACL/MAC-based ACL
Access Control List
Time-based ACL
Up to 1024 entries
8
SGS-6341 Series
9
SGS-6341 Series
Ordering Information
SGS-6341-24T4X Layer 3 24-Port 10/100/1000T + 4-Port 10G SFP+ Stackable Managed Switch
SGS-6341-24P4X Layer 3 24-Port 10/100/1000T 802.3at PoE + 4-Port 10G SFP+ Stackable Managed Switch (370W)
Layer 3 16-Port 100/1000X SFP + 8-Port Gigabit TP/SFP + 4-Port 10G SFP+ Stackable Managed Switch
SGS-6341-16S8C4XR
(100~240V AC, 36~75V DC)
SGS-6341-48T4X Layer 3 48-Port 10/100/1000T + 4-Port 10G SFP+ Stackable Managed Switch
Related Products
XGS3-24042 Layer 3 24-Port 10/100/1000T + 4-Port 10G SFP+ Stackable Managed Switch
Layer 3 24-Port 100/1000X SFP + 8-Port Shared TP + 4-Port 10G SFP+ Stackable Managed Switch
XGS3-24242
(100~240V AC, 36-75V DC)
XGS-5240-24X2QR Layer 2+ 24-Port 10G SFP+ + 2-Port 40G QSFP+ Stackable Managed Switch
10
SGS-6341 Series
Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp.
MTB-RJ 10G Copper -- 30m -- 0 ~ 70 degrees C
MTB-SR 10G LC Multi Mode 300m 850nm 0 ~ 60 degrees C
MTB-LR 10G LC Single Mode 10km 1310nm 0 ~ 60 degrees C
MTB-TSR 10G LC Multi Mode Up to 300m 850nm -45 ~ 75 degrees C
MTB-TLR 10G LC Single Mode 10km 1310nm -45 ~ 75 degrees C
Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (TX) Wavelength (RX) Operating Temp.
MTB-LA20 10G WDM(LC) Single Mode 20km 1270nm 1330nm 0 ~ 60 degrees C
MTB-LB20 10G WDM(LC) Single Mode 20km 1330nm 1270nm 0 ~ 60 degrees C
MTB-LA40 10G WDM(LC) Single Mode 40km 1270nm 1330nm 0 ~ 60 degrees C
MTB-LB40 10G WDM(LC) Single Mode 40km 1330nm 1270nm 0 ~ 60 degrees C
MTB-LA60 10G WDM(LC) Single Mode 60km 1270nm 1330nm 0 ~ 60 degrees C
MTB-LB60 10G WDM(LC) Single Mode 60km 1330nm 1270nm 0 ~ 60 degrees C
Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp.
MGB-GT 1000 Copper -- 100m -- 0 ~ 60 degrees C
MGB-SX 1000 LC Multi Mode 550m 850nm 0 ~ 60 degrees C
MGB-SX2 1000 LC Multi Mode 2km 1310nm 0 ~ 60 degrees C
MGB-LX 1000 LC Single Mode 20km 1310nm 0 ~ 60 degrees C
MGB-L40 1000 LC Single Mode 40km 1310nm 0 ~ 60 degrees C
MGB-L80 1000 LC Single Mode 80km 1550nm 0 ~ 60 degrees C
MGB-L120 1000 LC Single Mode 120km 1550nm 0 ~ 60 degrees C
MGB-TSX 1000 LC Multi Mode 550m 850nm -40 ~ 75 degrees C
MGB-TLX 1000 LC Single Mode 10km 1310nm -40 ~ 75 degrees C
MGB-TL40 1000 LC Single Mode 40km 1310nm -40 ~ 75 degrees C
MGB-TL80 1000 LC Single Mode 80km 1550nm -40 ~ 75 degrees C
Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (TX) Wavelength (RX) Operating Temp.
MGB-LA10 1310nm 1550nm
1000 WDM(LC) Single Mode 10km 0 ~ 60 degrees C
MGB-LB10 1550nm 1310nm
MGB-LA20 1310nm 1550nm
1000 WDM(LC) Single Mode 20km 0 ~ 60 degrees C
MGB-LB20 1550nm 1310nm
MGB-LA40 1310nm 1550nm
1000 WDM(LC) Single Mode 40km 0 ~ 60 degrees C
MGB-LB40 1550nm 1310nm
MGB-LA60 1310nm 1550nm
1000 WDM(LC) Single Mode 60km 0 ~ 60 degrees C
MGB-LB60 1550nm 1310nm
MGB-TLA10 1310nm 1550nm
1000 WDM(LC) Single Mode 10km -40 ~ 75 degrees C
MGB-TLB10 1550nm 1310nm
MGB-TLA20 1310nm 1550nm
1000 WDM(LC) Single Mode 20km -40 ~ 75 degrees C
MGB-TLB20 1550nm 1310nm
MGB-TLA40 1310nm 1550nm
1000 WDM(LC) Single Mode 40km -40 ~ 75 degrees C
MGB-TLB40 1550nm 1310nm
MGB-TLA60 1310nm 1550nm
1000 WDM(LC) Single Mode 60km -40 ~ 75 degrees C
MGB-TLB60 1550nm 1310nm