Scribd
Upload
30 views

Script Exer4

1. The document provides step-by-step instructions for creating a complex technical drawing in a CAD software using lines, arcs, circles, fillets, and trims. 2. It involves creating horizontal and vertical lines to establish an origin point, then adding additional lines, arcs, and circles with specified coordinates and radii. 3. The drawing is further defined through operations like filleting intersecting lines, trimming excess segments, and adding points and arcs tangent to existing lines or arcs.

Uploaded by

nick franco
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
30 views

Script Exer4

1. The document provides step-by-step instructions for creating a complex technical drawing in a CAD software using lines, arcs, circles, fillets, and trims. 2. It involves creating horizontal and vertical lines to establish an origin point, then adding additional lines, arcs, and circles with specified coordinates and radii. 3. The drawing is further defined through operations like filleting intersecting lines, trimming excess segments, and adding points and arcs tangent to existing lines or arcs.

Uploaded by

nick franco
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Drawing 4

1. Open master cam, press f9, then create, line , horizontal, origin, with x coordinate
( 1.250 ) y coordinate (0), screen fit, screen-unzoom twice
2. Back up, vertical, origin, with coordinates ( 0, -1.800), x coordinate (0), screen fit,
screen-unzoom
3. Back up, vertical, origin with coordinates (0,-2.480), x coordinate (1.250), enter
4. Main menu, modify, fillet, click radius, radius (0.5), then fillet by clicking line (1.250
and 1.800), then line (2.480 and 1.250)
5. Main menu, create, line, parallel, side/distance, select the vertical line (2.480), then
offset direction to left, with distance (0.375), enter
6. Main menu, create, line, polar, endpoint, click upper part of line (2.480), angle
(262.50), length (2.5)
7. Back up, horizontal, endpoint, click the lower part of the vertical line (2.480) and its
offset line, then press enter
8. Main menu, create, arc, tangent, 3 entities/points, select the two intersecting lines
and the offset line (2.480), click screen-zoom, zoom the bottom part
9. Main menu, modify, trim, 1 entity, trim the construction line by clicking the polar (7.5
degrees) and arc then click offset line (2.480) and arc, screen fit, screen-unzoom by 0.8
10. Main menu, create, arc, circle point radius, radius (0.25) with coordinates (0.5, -0.5),
enter, then type (0.75,-0.50) to specify the coordinates of the second circle
11. Main menu, create, line, tangent, 2 arcs, select the upper part of the two radius
(0.25)
12. Main menu, create, point, position, with coordinates (0.320, -1.620), enter, then type
coordinates (0.746, -1.332) for the second point
13. Main menu, create, arc, tangent, point, select, offset line (2.48) and second point,
radius (1), and select arc close to the line and point
14. Main menu, create, line, horizontal, enter coordinates (0, -1.135), select any length
to the right, enter
15. Main menu, create, arc, tangent, point, select the offset line (2.480) and second
point, enter radius (0.265), select the arc close to the offset line and point
16. Backup, point, select the offset line (2.480) and second point, enter radius (0.265),
select the upper part of the arc, screen repaint
17. Back up 2x, circle point radius, radius (0.515), then click the center from menu,
select arc (0.265)
18. Back up, tangent, point, select arc (0.265) and first point, enter radius (0.625), select
the arc close to the first point and arc (0.265)
19. Main menu, create, line, endpoints, click first point and the line from y-axis
20. Main menu, modify, fillet, click radius, radius (0.06) fillet the needed part
21. To fillet click the bottom part of line from y-axis and construction line from endpoints,
next click arc close to first point and construction line from endpoints.
22. Click the two arcs from second point, next click the bottom left part of circle 0.250
and circle 0.515, then click the bottom right part of circle 0.250 and arc 0.515
23. Main menu, modify, trim, 1 entity, click inner top part of arc and the horizontal line,
next click arc 0.265 and arc 0.625, then click bottom part of offset line 2.480 and arc
with radius 1, screen repaint
24. Main menu, modify, trim, 1 entity, screen zoom, zoom the right part of inner arcs,
click the right part of arc 0.250 and the horizontal line, screen fit, delete the two
horizontal construction lines and the vertical construction line, delete the two points

You might also like