TK-7302(H)V/8302(H)U

Compact VHF/UHF FM Mobile Radios

GENERAL FEATURES • QT / DQT FleetSync® /II (FM)

• Operator Selectable Tone
• 25 / 50 W (136-174 MHz) Models • PTT ID Digital ANI
• Two-Tone Decode
• 25 / 45 W (450-520 MHz) Models • Selective Call & Group Call
• Single & Two-Tone Encode
• Conventional Zones • Paging Call
• DTMF Encode / Decode
• 16 Channels / 2 Zones • Status Messaging
• Special Alert Tone Patterns
• Single Priority Scan • Emergency Status
• Busy Channel Lockout
• Single / Multi-Zone Scan • Input / Output Status Messages
• Time Out Timer
• 2-Digit LED Channel Display • FleetSync® GPS Ready
• Timed Power Off
• Function/Status LED Dots • Send GPS PF Key
• DB15 Accessory Interface
• Blue Function/Status LED • PTT ID & Emergency GPS Reporting
• 8 Programmable I/O Ports
• Transmit /Busy / Call Alert LED • Ignition On/Off GPS Reporting
• Ignition Sense
• Backlit Keys
• Public Address / Horn Alert Output
• 9 Programmable Function Keys MDC-1200
• MIL-Spec Standard Mic
• Emergency / AUX Key • PTT ID Digital ANI
• MIL-Spec 12-Key DTMF Mic Option
• Front Panel Speaker • Emergency Status
• Windows® Programming & Tuning
• Companded Audio • Radio Check
• Cloning
• Voice CH# Announcement (8 Languages) • Radio Inhibit
• MIL-STD-810 C/D/E/F
• Voice Inversion Scrambler Built-in
• IP-54 Water & Dust Intrusion
• 16 Scrambler Codes (per CH)
• Encryption / Board Control
• Emergency Call Features
• Lone Worker Alert
Options
■ KMC-35 ■ KES-3 ■ KLF-2 ■ KCT-60
Microphone External Speaker Line Filter DB 15-to-15 Pin
(Supplied) Molex Adaptor Cable

■ KMC-36 ■ KES-5 ■ KCT-18

Microphone External Speaker Ignition Sense Cable
with Keypad (requires KCT-60 option) (requires KCT-60 option)

■ KMC-9C ■ KMB-10 ■ KCT-36

Desktop Microphone Key Lock Adapter 3m Extension Cable
(for KCT-60)

All accessories and options may not be available in all markets.

Contact an authorized Kenwood dealer for details and complete list of all accessories and options.
Specifications
Model TK-7302V TK-7302HV TK-8302U TK-8302HU Model TK-7302V TK-7302HV TK-8302U TK-8302HU
GENERAL RECEIVER (Measurements made per TIA/EIA-603)
Frequency Range 136-174 MHz 450-520 MHz Sensitivity (12dB SINAD)
Number of Channels Wide 0.28 µV
Zone 2 Narrow 0.35 µV
Channel Max. 16 Selectivity
Channel Spacing 25 kHz/12.5 kHz Wide 75 dB
Operating Voltage 13.6V DC±15% Narrow 65 dB
Current Drain Intermodulation Distortion
Standby 0.4 A Wide 70 dB
Receive 1.0 A Narrow 60 dB
Transmit 8.0 A 14.0 A 8.0 A 14.0 A Spurious Response 75 dB
Operating Temperature Range -22°F ~ +140°F (-30°C ~ +60°C) Audio Output (4 Ω Impedance) 4 W with less than 5% distortion
Frequency Stability ±2.5 ppm (-30°C ~ +60°C) TRANSMITTER (Measurements made per TIA/EIA-603)
Antenna Impedance 50 Ω RF Power Output 5 W ~ 25 W 5 W ~ 50 W 5 W ~ 25 W 5 W ~ 45 W*1
Dimensions (W x H x D) Spurious Response 70 dB
Projections not included 6.3” x 1.7” x 5.4” (160 x 43 x 137 mm) Type of Emission
Weight (Net) 41.6oz (1,180g) Wide 16KØF3E
FCC ID K44407600 K44407601 K44407700 K44407702 Narrow 11KØF3E
FM Hum & Noise
Specifications are subject to change without notice, due to advancements in technology. Wide 45 dB
FleetSync ® is a registered trademark of JVC KENWOOD Corporation in the United States and/or other countries. Narrow 40 dB
Windows® is a registered trademark of Microsoft Corporation in the United States and other countries.
Microphone Impedance 600 Ω
All other trademarks are property of their respective owners.
Audio Distortion Less than 5%
*1: 490 ~ 512 MHz: 5 ~ 40 W, 512 ~ 520 MHz: 5 ~ 35 W

Applicable MIL-STD & IP

Standard MIL 810C MIL 810D MIL 810E MIL 810F
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II
High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II
Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II
Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I
Rain*2 506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, III
Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4
Salt Fog*2 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4
Dust*2 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III
Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I
Shock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V 516.4/Procedure I, IV, V 516.5/Procedure I, IV, V
International Protection Standard
Dust & Water Protection*2 IP54
*2: These MIL-STD and IP54 compliance categories require a KMC-35/36 microphone to be connected; the DB-15 connector to have supplied cover installed and KCT-xx cables or external speakers installed.

ADS#28012 Printed in USA