Right Angle XLR Cable Connector

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

R

ASSEMBLY INSTRUCTION
NC*FRX & NC*MRX | XLR Cable Connector

A A Slide the boot onto the cable.

B Prepare cable as shown.

C Insert wires into the terminals and solder


them.

D Position the sleeve over the cables.


18
B
4 E Slide insert into the housing until it snaps
in.
Align insert with housing.

F Position the cable.


C
G Slide the chuck into the housing.
Pay attention to position chuck as shown.

F
45° 9 0°

-145°-90°

0 -45°

Page 1
R

ASSEMBLY INSTRUCTION I NC*FRX / NC*MRX

I H Position the cover.


Before placing the cover choose the orientation
of cable outlet by turning housing.

I Finish the assembly by turning the bushing


onto the connector.
H

Disassembly of the insert


A
A Remove cover and chuck.

B Push latch and turn housing approx. a half


C turn until housing can be separated.

C Lift the locking clip by help of a screw driver.

D Remove insert.
B

Clip arrangement!

NEUTRIK AG LI T: +423 / 237 24 24 F: +423 / 232 53 93 NEUTRIK France FR T: +33 1 / 4131 6750 F: +33 1 / 4131 0511
NEUTRIK USA Inc. USA T: +1 704 / 972 3050 F: +1 704 / 438 9202 NEUTRIK Tokyo Ltd. JP T: +81 3 / 3663 4733 F: +81 3 / 3663 4796
NEUTRIK (UK) Ltd. UK T: +44 1983 / 811 441 F: +44 1983 / 811 439 NEUTRIK Hong Kong Ltd. HK T: +852 / 2687 6055 F: +852 / 2687 6052
NEUTRIK Vertriebs GmbH DE / NL / AT/DK T: +49 8131 / 280 890 F: +49 8131 / 280 830

Draft. Nr.: BDA 173-0 / 3102M1441 I Update: 13.07.2011 I Data subject to change without prior notice. ©2011 NEUTRIK® . ALL RIGHTS RESERVED.

www.neutrik.com Page 2

You might also like