RoCorr MFL-A

ROCORR MFL-A SERVICE
IN-LINE HIGH-RESOLUTION METAL LOSS

DETECTION AND SIZING
Pipeline integrity is affected by corrosion, KEY ADVANTAGES

pitting, erosion, lamination, gouging and other • High-resolution tri-axial magnetic field analysis ensuring
accurate and precise feature classification and sizing in
metal loss features. These threats are a
accordance with API and POF regulations
concern during the complete lifecycle from • Lifetime integrity management supported by full recording
commissioning to phase out. of the raw inspection data
• Largest tool fleet on the market ensuring global tool
Our RoCorr MFL-A service is an important availability and flexibility
basis to ensure that your high-value assets • High quality service with certified processes (API 1163),
personnel qualification (ASNT) and equipment (CE, ATEX)
maintain their structural integrity.
THE SOLUTION
ROSEN’s Magnetic Flux Leakage Technology is the right
choice to reliably and effectively detect and characterize
internal and external metal loss features.
Our inspection tools embody robust and multi-faceted
technology with a proven record of sensitivity and accuracy,
ensuring the best possible results in every performance
category.
Our well-structured, certified data evaluation process
enables ROSEN’s data analysts to provide the required high-
quality assessment on time.
Our reporting software ensures easy data visualization and
facilitates the broad use of inspection results.
SERVICE OPTIONS
All aspects from the inspection request to the final report are
covered with the flexibility to choose from various service
options.
• Cleaning – operational and pre inspection
• Speed Control – inspection at high flow rates
• XYZ – route mapping and strain assessment
• Multi-Diameter – pipelines with varying diameter
• Combo – multiple inspection technologies in one run
• BiDi – single entry pipelines
• Offshore – long distance and high pressure
• Post-ILI – data alignment and combined evaluation
• Integrity Assessments – RBI, FFP, CGA
• NIMA – versatile asset integrity software suite
www.rosen-group.com
ROCORR MFL-A SERVICE
IN-LINE HIGH-RESOLUTION METAL LOSS DETECTION AND SIZING
TECHNICAL SPECIFICATIONS
Standard Operating Specifications Metal Loss Feature Classification
Tool sizes available 3" - 56" All reported metal loss features are classified according to
Pipeline product Gas or liquids the dimensions shown in the following Pipeline Operators’
Product temperature range 0 °C - 65 °C (32 °F - 150 °F) Forum (POF) specification graph.
Maximum operating pressure 15 MPa (2,175 psi)
25 MPa (3,625 psi) optional A = wall thickness or 10 mm (0.39”), whichever value is greater
Operating speed range Up to 3.0 m/s (9.8 mph)
Width/A
Circumferential grooving
Product flow range* Up to 12 m/s (26.8 mph)
Minimum pipeline bend radius 1.5D 8
Circumferential slotting
Wall thickness range 4 - 32 mm (0.15" - 1.26")
7
Maximum operating time 400 hours
Maximum inspection length 800 km (500 miles) 6
* Fitted with optional speed control system (gas lines only)
Note: Please contact ROSEN for conditions outside of these specifications. 5 General
Location and Orientation Capabilities 3
Axial position accuracy from reference marker 1:1000 2

1 m on 1000 m marker distance
Pitting Axial grooving
1 ft. on 1000 ft. marker distance
1
Axial position from closest weld ±0.1 m (±4")
Axial slotting
Circumferential position accuracy ±5°
The axial positioning accuracy is given at 90 % certainty and is based on following 1 2 3 4 5 6 7 8
conditions: Pinhole Length/A
1. D istance between upstream (u/s) and downstream (d/s) marker/reference
point < 2,000 m (6,500 ft.).
2. A ctual aboveground distance to both u/s and d/s marker/reference points have Wall Thickness Detection
been measured and correlated.
3. Marker points are placed correctly according to respective ROSEN marker specification. ±1 mm (± 0.04”) or ±0.1t, whichever value is greater
at 80 % certainty
t = wall thickness
Performance Specifications
General Axial Circumf. Circumf.
metal loss Pitting Grooving Grooving Slotting1)
Depth at POD = 90 % 0.1t 0.1t 0.1t 0.1t 0.15t
Depth sizing accuracy at 80 % certainty ±0.1 t ±0.1 t ±0.15 t ±0.1 t ±0.1 t
Width sizing accuracy at 80 % certainty ±15 mm (0.59") ±12 mm (0.47") ±12 mm (0.47") ±12 mm (0.47") ±15 mm (0.59”)
Length sizing accuracy at 80 % certainty ±15 mm (0.59") ±10 mm (0.39") ±10 mm (0.39") ±10 mm (0.39") ±10 mm (0.39”)
Abbreviations: POD = Probability of Detection; t = wall thickness
Remarks and Features

• API 1163 compliant services
• CE and ATEX certification available
• Tailored solutions with different specifications upon
request: multiple tool sizes or multi-diameter tools, higher
pressure rating
• Specifications are subject to change due to specific
requirements or tool configurations
© 2022 ROSEN Swiss AG. All Rights Reserved.

Obere Spichermatt 14 · 6370 · Switzerland · Phone: +41-41-618-0300 · [email protected]
RoCorr-MFL-A_SF_EN_22.1.1_A4
Entire content is for general information purposes only and is believed to be accurate. ROSEN will not accept any liability in connection with the content. This
limitation applies to all loss or damage of any kind, including but not limited to, compensatory, direct, indirect or consequential damage, loss of income or profit,
loss of or damage to property and claims by third party.
www.rosen-group.com

RoCorr MFL-A

Uploaded by

Copyright:

Available Formats

RoCorr MFL-A

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

RoCorr MFL-A

Uploaded by

Copyright:

Available Formats

ROCORR MFL-A SERVICE

IN-LINE HIGH-RESOLUTION METAL LOSS

Pipeline integrity is affected by corrosion, KEY ADVANTAGES

Operating speed range Up to 3.0 m/s (9.8 mph)

Location and Orientation Capabilities 3

Axial position accuracy from reference marker 1:1000 2

Remarks and Features

© 2022 ROSEN Swiss AG. All Rights Reserved.

You might also like