IEC GU IDE 1 1 2

®
Edition 4.0 201 7-06

GU IDE

G u i d e on th e s afety o f m u l ti m ed i a e q u i pm e n t
IEC GUIDE 1 1 2:201 7-06(en)
 T H I S P U B L I C AT I O N I S C O P YRI G H T P RO T E C T E D

C o p yri g h t © 2 0 1 7 I E C , G e n e v a , S wi tz e rl a n d

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about I EC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local I EC member National Committee for further information.
IEC Central Office Tel.: +41 22 91 9 02 1 1
3, rue de Varembé Fax: +41 22 91 9 03 00
CH-1 21 1 Geneva 20 [email protected]
Switzerland www.iec.ch
Ab ou t th e I E C

The I nternational Electrotechnical Commission (I EC) is the leading global organization that prepares and publishes
I nternational Standards for all electrical, electronic and related technologies.
Ab o u t I E C p u b l i ca ti o n s

The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
I E C Catal og u e - webstore. i ec. ch /catal og u e E l ectroped i a - www. el ectroped i a. org

The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 1 6 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.
I E C pu bl i cati on s s earch - www. i ec. ch /search pu b I E C G l os sary - s td . i ec. ch /g l oss ary

The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and
CISPR.
I E C J u st Pu bl i s h ed - webstore. i ec. ch /j u stpu bl i sh ed

Stay up to date on all new IEC publications. Just Published I E C C u stom er S ervi ce C en tre - webstore. i ec. ch /csc

details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: [email protected].
 IEC GU I DE 1 1 2
®
Edition 4.0 201 7-06

GU IDE

G u i d e on th e safe ty of m u l ti m ed i a e q u i pm e n t

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION

ICS 35.020 ISBN 978-2-8322-4453-1

Warn i n g ! M ake s u re th a t you ob tai n ed th i s p u b l i cati on from an au th ori zed d i stri b u tor.

® Registered trademark of the International Electrotechnical Commission

 –2– I EC GUI DE 1 1 2:201 7 © I EC 201 7

CONTENTS
FOREWORD . .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... . .. .. ... ... ... ... ... ... ... ... .. 3
I NTRODUCTI ON .. ... ... ... ... ... ... ... ... ... ... ... ... .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. .. . ... ... ... ... ... ... ... ... ... 5
1 Scope .. .. ... ... ... ... ... ... ... ... ... ... ... ... ... .. . ... .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. ... ... ... ... ... ... ... ... ... . 6
2 Reference publications ... ... ... ... .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. ... ... ... ... ... ... ... ... ... . .. ... ... ... . 6
3 Guidelines ... ... ... ... ... ... .. ... ... ... ... ... ... ... ... ... ... . .. ... ... ... ... .. ... ... ... ... ... ... ... ... ... ... ... .. . ... ... .. ... ... .. 6
3.1 Compliance ... ... ... ... ... ... ... ... .. ... ... ... ... .. . ... ... ... ... ... ... ... ... ... .. ... ... ... ... ... ... ... ... ... ... ... ... ... 6
3.2 General requirements . .. ... ... ... ... ... ... ... ... ... ... ... .. . ... ... .. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. 6
3.3 Marking . ... ... .. ... ... ... ... ... ... ... ... ... ... ... . .. ... ... ... .. ... ... ... ... ... ... ... ... ... ... ... ... .. . ... .. ... ... ... ... ... 6
3.4 I nterfaces to the telecomm unication network .. ... ... ... ... ... .. ... ... ... ... ... ... ... ... ... ... .. . ... ... . 7
3.5 Equipm ent containing coin/button cell batteries .. ... ... ... ... .. ... ... ... ... ... ... ... ... . .. ... ... ... ... . 7
I EC GUI DE 1 1 2:201 7 © I EC 201 7 –3–

INTERNATIONAL ELECTROTECHNICAL COMMI SSION

____________

G U I D E O N T H E S AF E T Y O F M U L T I M E D I A E Q U I P M E N T

FOREWORD
1 ) The I nternational Electrotechnical Com m ission (I EC) is a worldwide organization for standardization com prising
all national el ectrotechnical com m ittees (I EC National Com m ittees). The object of I EC is to prom ote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, I EC publishes I nternational Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “I EC
Publication(s)”). Their preparation is entrusted to technical com m ittees; any I EC National Com m ittee interested
in the subject dealt with m ay participate in this preparatory work. I nternational, governm ental and non-
governm ental organizations l iaising with the I EC also participate in this preparation. I EC collaborates closely
with the I nternational Organization for Standardization (I SO) in accordance with conditions determ ined by
agreem ent between the two organizations.
2) The form al decisions or agreem ents of I EC on technical m atters express, as nearl y as possible, an international
consensus of opinion on the relevant subjects since each technical com m ittee has representation from all
interested I EC National Com m ittees.
3) I EC Publications have the form of recom m endations for international use and are accepted by I EC National
Com m ittees in that sense. While all reasonable efforts are m ade to ensure that the technical content of I EC
Publications is accurate, I EC cannot be held responsible for the way in which they are used or for any
m isinterpretation by any end user.
4) I n order to prom ote international uniform ity, I EC National Com m ittees undertake to apply I EC Publications
transparently to the m axim um extent possibl e in their national and regional publications. Any divergence
between any I EC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) I EC itself does not provide any attestation of conform ity. I ndependent certi fication bodies provide conform ity
assessm ent services and, in som e areas, access to I EC m arks of conform ity. I EC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to I EC or its directors, em ployees, servants or agents including individual experts and
m em bers of its technical com m ittees and I EC National Com m ittees for any personal injury, property dam age or
other dam age of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or rel iance upon, this I EC Publication or any other I EC
Publications.
8) Attention is drawn to the Norm ative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that som e of the elem ents of this I EC Publication m ay be the subject of
patent rights. I EC shal l not be held responsible for identifying any or all such patent rights.

This fourth edition of I EC Guide 1 1 2 has been prepared in accordance with I SO/I EC Directives,
Part 1 , Annex A, by the I EC Advisory Comm ittee on Safety (ACOS). This is a non-mandatory
guide in accordance with SMB Decision 1 36/8.

This fourth edition cancels and replaces the third edition published in 2008. This edition
constitutes a technical revision. This new edition includes the following significant technical
changes with respect to the previous edition: it makes reference to the latest editions of
I EC 60065 and I EC 60950-1 ; it deals additionally with equipment containing coin / button cell
batteries.
 –4– I EC GUI DE 1 1 2: 201 7 © I EC 201 7

The text of this I EC Guide is based on the following documents:

Approval docum ent Report on voting
C/2004/DV C/2025/RV

Full information on the voting for the approval of this I nternational Standard can be found in the
report on voting indicated in the above table.

This document has been drafted in accordance with the I SO/I EC Directives, Part 2.

A bilingual version of this publication may be issued at a later date.

I EC GUI DE 1 1 2:201 7 © I EC 201 7 –5–

INTRODUCTI ON
This Guide contains guidelines for using the current editions of I EC 60065 and
I EC 60950-1 in evaluating the safety of m ultim edia equipment.

The following fundam ental principle was adopted as the basis for this G uide:

Equipment complying with the requirements of IEC 60065, as well as equipment complying with
the requirements of IEC 60950-1, is considered to be safe when used on its own.
Such equipment when interconnected in multimedia systems in accordance with the installation
instructions is also considered to be safe.
It should be noted that there are a num ber of differences between the two standards.

Requirem ents which should be fulfilled in addition to those in the current two standards are
specified in this Guide.

Additional clarifications are under consideration for both publications in TC 1 08. Whenever
IEC 60065 or I EC 60950-1 are amended or revised, or technical or m arket conditions change
significantly, ACOS will consider this Guide for revision.

In addition, it should be noted that I EC 62368-1 may be used as an alternative to either

IEC 60065 or I EC 60950-1 .

For a multim edia system containing Class I and Class I I equipm ent, the connection to the
supply should ensure a reliable connection to protective earth for Class I equipment.
 –6– I EC GUI DE 1 1 2: 201 7 © I EC 201 7

G U I D E O N T H E S AF E T Y O F M U L T I M E D I A E Q U I P M E N T

1 S cope

This Guide contains guidelines for using the current editions of I EC 60065 and I EC 60950-1 in
evaluating the safety of multim edia equipm ent.

This Guide focuses on the use of I EC 60065 or I EC 60950-1 . As an alternative to both

standards, I EC 62368-1 m ay be used.

2 Re fe re n c e p u b l i c a t i o n s

I EC 60065:201 4, Audio, video and similar electronic apparatus – Safety requirements

I EC 60950-1 :2005, Information technology equipment – Safety – Part 1: General requirements

I EC 60950-1 :2005/AMD1 : 2009
IEC 60950-1 :2005/AMD2:201 3

IEC 62368-1 , Audio/video, information and communication technology equipment – Part 1 :

Safety requirements

3 G u i d el i n es

3. 1 C om pl i an ce

Equipm ent for use in multimedia systems should comply with:

• I EC 60065 or I EC 60950-1 , according to the manufacturer’s choice; and
• the additions listed in Clause 3.
As explained in Clause 1 , this Guide focuses on the use of I EC 60065 or I EC 60950-1 .
Alternatively, I EC 62368-1 may be considered.

3. 2 G e n e ra l re q u i re m e n t s

I EC 60065:201 4, Clause 3: this clause is applicable.

I EC 60950-1 :2005, 1 .3: no additions required.

3. 3 M a rki n g

IEC 60065: 201 4, Clause 5: this clause is applicable together with the following addition to 5. 5:

For equipment covered by I EC 60065 intended for use in multimedia system s, the instructions
for u se an d i n stal l ati on sh ou l d gi ve th e n ecessary i n form ation to en su re correct an d safe
in stal l ati on and interconnection of the equipment.

IEC 60950-1 : 2005, I EC 60950-1 :2005/AMD1 :2009 and I EC 60950-1 :2005/AMD2:201 3, 1 .7: no
additions required.
I EC GUI DE 1 1 2:201 7 © I EC 201 7 –7–

3. 4 I n t e rfa c e s t o t h e t e l e c o m m u n i c a t i o n n e t w o rk

IEC 60065: Annex B of I EC 60065:201 4 should be applied to equipment to which I EC 60065

is applied and which is intended for use in multimedia systems and for connection to a
telecom munication network.

Alternatively, Clause 6 of I EC 60950-1 :2005, I EC 60950-1 :2005/AMD1 :2009 and

IEC 60950-1 : 2005/AMD2:201 3 m ay be applied.

NOTE 1 This choice applies to this item only and is perm itted due to the fast evolution of the technology.
NOTE 2 For telecom m unications networks in Austral ia, due to existing national differences to both standards, only
Clause 6 of AS/NZS 60950-1 : 201 5 m ay be applied to I EC 60065 equipm ent. Annex B of I EC 60065: 201 4 is not
applicable in Australia.

3. 5 E q u i p m e n t c o n t a i n i n g c o i n /b u t t o n c e l l b a t t e ri e s

Subclauses 2.7.1 5 (definition), 5.4 c) (marking), 5. 5.2 j) (instructions), and 1 2.7 (requirem ents)
of I EC 60065:201 4 should be applied to equipment with user replaceable coin/button cell
batteries when I EC 60950-1 is applied.

NOTE The publication of I EC 60065: 201 4/COR2: 201 6 m akes the requirem ents also valid for lithium batteries.

___________
I N TE RN ATI O N AL

E LE CTRO TE CH N I CAL

CO M M I S S I O N

3, ru e d e Va re m bé

P O B ox 1 3 1

CH -1 2 1 1 G e n e va 2 0

S wi tze rl a n d

Te l : + 41 22 91 9 02 1 1

F a x: + 4 1 22 91 9 03 00

i n fo @i e c. ch

www. i e c. ch