Scribd Logo
Upload

Welcome to Scribd!

  • 14 views

    Einweg 03

    Uploaded by

    Dieter Baldauf
    1) The document simulates the transient response of an RL circuit when connected to a 230V 50Hz power source for 500ms. 2) It calculates key values like the maximum and minimum voltage across the load resistor RL, the voltage ripple, and the charging current of capacitor CG. 3) Graphs are plotted to visualize the voltage response across the load and diode over time.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Einweg 03

    Uploaded by

    Dieter Baldauf
    14 views1 page
    1) The document simulates the transient response of an RL circuit when connected to a 230V 50Hz power source for 500ms. 2) It calculates key values like the maximum and minimum voltage across the load resistor RL, the voltage ripple, and the charging current of capacitor CG. 3) Graphs are plotted to visualize the voltage response across the load and diode over time.

    Original Title

    Einweg_03

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1) The document simulates the transient response of an RL circuit when connected to a 230V 50Hz power source for 500ms. 2) It calculates key values like the maximum and minimum voltage across the load resistor RL, the voltage ripple, and the charging current of capacitor CG. 3) Graphs are plotted to visualize the voltage response across the load and diode over time.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    14 views1 page

    Einweg 03

    Uploaded by

    Dieter Baldauf
    1) The document simulates the transient response of an RL circuit when connected to a 230V 50Hz power source for 500ms. 2) It calculates key values like the maximum and minimum voltage across the load resistor RL, the voltage ripple, and the charging current of capacitor CG. 3) Graphs are plotted to visualize the voltage response across the load and diode over time.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Gleichung Transienten

    Eingaben Simulation
    umax=230*sqrt(2)
    RL=50 TR1
    CG=40 mF Stop=500 ms
    Points=500001
    R3
    R=10 Ω
    Uein R1 R2
    Utrafo Udiode ULast
    R=1 Ω R=0.1 Ω D_1N759_1

    U T C1
    D_1N4007_1
    U=umax C=CG
    freq=50 Hz RL
    R=RL
    Tr1 IZ
    T=20

    Gleichung
    Welligkeit
    yr=range(ULast,0.480,0.500)
    z=length(yr)
    min=min(yr) z = 2e+04
    max=max(yr) max = 12.1
    W=max-min
    Wb=I*dt/CG min = 12
    I=max/RL time: 66.8ms Welligkeit W = 65.8mV
    dt=20 ms Udiode.Vt: 13.6 Wb = 0.121
    I = 0.242
    CG = 0.04
    plot(linspace(0,0.02,z),yr)

    15 12.1 indep: 0.00634


    plot(linspace(0,0.02,z),yr): 12.1

    10 12.05 indep: 0.00351


    Udiode.Vt
    ULast.Vt

    plot(linspace(0,0.02,z),yr): 12
    0 0.01 0.02
    indep
    5 0.03

    0.02
    IZ.It

    0 0.01
    0 0.1 0.2 0.3 0.4 0.5
    time 0
    time 0 0.2 0.4
    time

    You might also like