0% found this document useful (0 votes)
831 views1 page

Bonding In-Process Inspection Checklist

This document is a Bonding In-Process Inspection Checklist for Facades (Glass and Aluminum Fabrication)

Uploaded by

Ronnel Leano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
831 views1 page

Bonding In-Process Inspection Checklist

This document is a Bonding In-Process Inspection Checklist for Facades (Glass and Aluminum Fabrication)

Uploaded by

Ronnel Leano
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Bonding In-Process Inspection Checklist

Ref. No.: Date:

Project No.: Fabrication Order No.:

Project Name:
Inspection Size
Frequency:
Part No.:

Visual Inspection Quantity


Quality Related Activity
Item Checklist Rejecte
Procedure/Work Instruction Ok Not ok N/A Passed
d

1 Completeness (component/accessories)

2 Identification (Marking/Code)

3 Physical Appearance (Glass/Cladding/Frame)

4 Protective Tape (Frame/Cladding)

5 Check the corners/meter joints/square joints of the frame

6 Clean w/cleaning solvent (Frame/ Glass/ Cladding)

7 Apply Spacer/gasket/setting block


Sealant Glass Bonding
Machine
8 Apply Butyl tape

9 Place the Glass/Cladding to the frame

10 Apply primer

11 Apply masking tape

12 Apply Structural silicon sealant

13 Apply perimeter glazing frame (glass adaptor)

14 Check the unit panel (Aesthetics/Cleanliness/ Workmanship)

Remarks:

Disposition: Proceed with next phase, as per Do not proceed with next phase,
Proceed with next phase
(Tick) action comments action comments
Attachment(s):
Inspected By: Approved By:
Signature: Signature:
Full Name: Full Name:
Designation: Designation:
Date: Date:

Document No.: Revision No.: 00


Page 1 of 1
Document Title: Bonding In-Process Inspection Checklist Revision Date:

You might also like