Scribd Logo
Upload

Welcome to Scribd!

  • 31 views

    Circuito PPG y EMG

    Uploaded by

    Julio Fajardo Garcia
    The document summarizes the calculations for two filter circuits: 1. A high-pass Butterworth filter with a cutoff frequency of 0.5 Hz. It calculates the resistor and capacitor values. 2. A low-pass Butterworth filter with a cutoff frequency of 15 Hz. It also calculates the necessary resistor and capacitor values. 3. A high-pass MFB filter with a cutoff frequency of 20 Hz. It determines the resistor and capacitor values for this filter. 4. A low-pass MFB filter with a cutoff frequency of 450 Hz. It calculates the resistor and capacitor components for this filter design.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Circuito PPG y EMG

    Uploaded by

    Julio Fajardo Garcia
    31 views2 pages
    The document summarizes the calculations for two filter circuits: 1. A high-pass Butterworth filter with a cutoff frequency of 0.5 Hz. It calculates the resistor and capacitor values. 2. A low-pass Butterworth filter with a cutoff frequency of 15 Hz. It also calculates the necessary resistor and capacitor values. 3. A high-pass MFB filter with a cutoff frequency of 20 Hz. It determines the resistor and capacitor values for this filter. 4. A low-pass MFB filter with a cutoff frequency of 450 Hz. It calculates the resistor and capacitor components for this filter design.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document summarizes the calculations for two filter circuits: 1. A high-pass Butterworth filter with a cutoff frequency of 0.5 Hz. It calculates the resistor and capacitor values. 2. A low-pass Butterworth filter with a cutoff frequency of 15 Hz. It also calculates the necessary resistor and capacitor values. 3. A high-pass MFB filter with a cutoff frequency of 20 Hz. It determines the resistor and capacitor values for this filter. 4. A low-pass MFB filter with a cutoff frequency of 450 Hz. It calculates the resistor and capacitor components for this filter design.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    31 views2 pages

    Circuito PPG y EMG

    Uploaded by

    Julio Fajardo Garcia
    The document summarizes the calculations for two filter circuits: 1. A high-pass Butterworth filter with a cutoff frequency of 0.5 Hz. It calculates the resistor and capacitor values. 2. A low-pass Butterworth filter with a cutoff frequency of 15 Hz. It also calculates the necessary resistor and capacitor values. 3. A high-pass MFB filter with a cutoff frequency of 20 Hz. It determines the resistor and capacitor values for this filter. 4. A low-pass MFB filter with a cutoff frequency of 450 Hz. It calculates the resistor and capacitor components for this filter design.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Circuito de PPG. Clase 19 de octubre del 2022.

    Circuito:

    Proceso:

    Cálculos:

    Filtro 1. Butterworth, Sallen-Key Pasa-Altas.


    1
    Usamos la simplificación 1: 𝑅2 = 𝑅 ; 𝐶1 = 𝐶. 𝑄1 = ; 𝐾 = 10
    √2
    𝑅1 𝐶2 = 3.3𝜇𝐹
    =𝑚 ; 𝑛= = 1.0000
    𝑅2 𝐶1 = 3.3𝜇𝐹
    √𝑚𝑛 1 √𝑚(1.000)
    𝑄𝑖 = = = ⟹ 𝑚 = 0.1594
    𝑛 + 1 + 𝑚𝑛(1 − 𝐾) √2 (1.000) + 1 + 𝑚(1.000)(1 − 10)
    1 1 1
    𝜔𝑝 = ⟹𝑅= = = 241.6 𝑘Ω
    2𝜋𝑅𝐶 √𝑚𝑛 2𝜋𝜔𝑝 𝐶 √𝑚𝑛 2𝜋(0.5 𝐻𝑧)(3.3𝜇𝐹)√(0.1594)(1.0000)
    𝑅 = 𝑅2 = 241.6 𝑘Ω
    𝑅1 = 𝑚𝑅2 = (0.1594)241.6 𝑘Ω = 38.5 𝑘Ω
    𝑅4 𝑅4 𝑅4 𝑅4 = 9.09 𝑘Ω
    𝐾 =1+ ⟹ 10 = 1 + ⟹ =9⟹ ≈9
    𝑅3 𝑅3 𝑅3 𝑅3 = 1.00 𝑘Ω

    Filtro 2. Butterworth, Sallen-Key Pasa-Bajas.


    1
    Usamos la simplificación 1: 𝑅2 = 𝑅 ; 𝐶1 = 𝐶. 𝑄2 = ; 𝐾 = 10
    √2
    𝐶2 1 𝜇𝐹
    =𝑛= = 𝑛 = 10
    𝐶1 100 𝑛𝐹
    √𝑚𝑛 1 √𝑚(10)
    𝑄𝑖 = = = ⟹ 𝑚 = 0.0127
    𝑚 + 1 + 𝑚𝑛(1 − 𝐾) √2 𝑚 + 1 + 𝑚(10)(1 − 5)
    1 1 1
    𝜔𝑝 = ⟹𝑅= = = 297.73 𝑘Ω
    2𝜋𝑅𝐶 √𝑚𝑛 2𝜋𝜔𝑝 𝐶 √𝑚𝑛 2𝜋(15 𝐻𝑧)(3.3𝜇𝐹)√(0.0127)(10)
    𝑅 = 𝑅2 = 297.73 𝑘Ω
    𝑅1 = 𝑚𝑅2 = (0.0127)297.73 𝑘Ω = 3.78 𝑘Ω

    𝑅4 𝑅4 𝑅4 𝑅4 = 4.02 𝑘Ω
    𝐾 =1+ ⟹ 5= 1+ ⟹ =4 ⟹ ≈4
    𝑅3 𝑅3 𝑅3 𝑅3 = 1.02 𝑘Ω
    Circuito de EMG. Clase 20 de octubre del 2022.

    Circuito:

    Cálculos:

    Filtro 1. MFB Pasa-Altas.


    Proponemos 𝐶1 = 1 𝜇𝐹.
    1
    𝑄1 = ; 𝐾 = 10
    √2
    𝐶3 = 𝐶1 = 1 𝜇𝐹
    𝐶1 1 𝜇𝐹
    𝐶4 = = = 0.1 𝜇𝐹
    𝐾 10
    𝑚 = 𝜔0 𝐶1 = 2𝜋(20 𝐻𝑧)(1 𝜇𝐹) ⟹ 𝑚 = 1.2566 × 10−4

    1 1
    𝑅2 = = ⟹ 𝑅2 = 5.36 𝑘Ω
    1 1 1
    𝑄𝑚 (2 + 𝐾 ) ( ) (1.2566 × 10−4 ) (2 + 10)
    √2

    1 1 1
    𝐾𝑄 (2 + 𝐾 ) (10) ( ) (2 + 10)
    𝑅5 = = √2 ⟹ 𝑅5 = 118.17 𝑘Ω
    𝑚 (1.2566 × 10−4 )

    Filtro 2. MFB Pasa-Bajas.


    Usamos la simplificación: 𝑅 = 𝑅1 = 𝑅2 ; 𝑅3 = 𝑚𝑅 ; 𝐶1 = 𝐶 ; 𝐶2 = 𝑛𝐶.
    1
    𝑄2 = ; 𝐾 = 10
    √2
    Arbitrariamente se eligieron 𝐶1 ; 𝐶2 .
    𝐶2 100 𝑛𝐹
    =𝑛= = 𝑛 = 0.2127
    𝐶1 470 𝑛𝐹
    √𝑚𝑛 1 √𝑚(0.2127)
    𝑄𝑖 = = = ⟹ 𝑚 = 0.08944
    1 + 𝑚(1 − 𝐾) √2 1 + 𝑚(1 − 10)
    1 1 1
    𝜔0 = ⟹𝑅= = = 5.45 𝑘Ω
    𝑅𝐶 √𝑚𝑛 2𝜋𝜔0 𝐶 √𝑚𝑛 2𝜋(450 𝐻𝑧)(470 𝑛𝐹)√(0.08944)(0.2127)
    𝑅 = 𝑅1 = 𝑅2 = 5.45 𝑘Ω
    𝑅3 = 𝑚𝑅 = (0.08944)5.45 𝑘Ω = 487.96 𝑘Ω

    You might also like