POWER CONTACTORS

MN9 to MN32
General Information (ac operation & dc operation) Accessories Spares Catalogue No. suffixes Terminal Arrangements Technical Data Overall Dimensions

Page 6/2

MN45 to MN550
General Information

Page 6/2

6/4,6/5 6/6 6/7 6/31 6/16,6/27,6/28 6/34

Accessories Spares Catalogue No. suffixes Terminal Arrangements Technical Data Overall Dimensions

6/4,6/5 6/6 6/7 6/31 6/17-6/20,6/27,6/28 6/35,6/36

ML0 to ML3
General Information Accessories Spares Catalogue No. suffixes Technical Data Overall Dimensions

Page 6/8 6/9 6/10 6/11 6/23,6/29,6/30 6/39

ML4 to ML12
General Information Accessories Spares Catalogue No. suffixes Technical Data Overall Dimensions

Page 6/8 6/9 6/10 6/11 6/24,6/29,6/30 6/40,6/41

CONTROL CONTACTORS

MN0
General Information Accessories Spares Catalogue No. suffixes Terminal Arrangements Technical Data Overall Dimensions

Page 6/12 6/13 6/14 6/15 6/33 6/26 6/38

MM00, MM01
General Information Accessories Spares Catalogue No. suffixes Technical Data Overall Dimensions

Page 6/12 6/13 6/14 6/15 6/25 6/41,6/42

CONTACTORS .OR SPECIAL APPLICATIONS

MN9W to MN25W
General Information Accessories Spares Catalogue No. suffixes Technical Data Overall Dimensions

Page 6/3 6/4,6/5 6/6 6/7 6/21 6/34

MN16C, 32C
General Information Accessories Spares Catalogue No. suffixes Terminal Arrangements Technical Data Overall Dimensions

Page 6/3 6/4,6/5 6/6 6/7 6/32 6/22 6/37

SALIENT .EATURES O. MN CONTACTORS

Suitable for tropical conditions, ensures reliable performance in high ambient temperature, humidity etc. Enclosed construction ensures protection of contact & magnet pole faces from dust and foreign particles. Alphanumeric terminal marking eliminates wiring error. Coil voltage indication on coil terminals makes identification easy. Suitable for snap fit mounting on 35mm. Din rail upto 32Amps. .ront ON/O.. mechanical indication provides visual inspection of the state of the contactor. Main terminals are suitable for aluminium busbars & lugs so as to give higher terminal capacity. Common accessories for multiple ratings of contactors. Easy contact/coil accessibility and replacement. Build-in protection to coil against overvoltage & undervoltage conditions.

6/1

CONTACTORS - TYPE MN
Conformance to IS 13947 (Part 4/Sec.1) and IEC:60947-4-1

POWER CONTACTORS

Contactor Type

Ie AC-3

Ie AC-1

Motor rating at 50Hz 220V 380V 500V 240V 415V

Built in auxiliary contacts

Qty per Packing

Wt approx.per Contactor

Catalogue No. *

AC operation [A] 9 MN9/12/16 9 12 12 16 16 25 32 [A] 25 25 30 30 30 30 45 55 [KW] [KW] [KW] 2.2 2.2 3 3 4 4 6.5 7.5 4 4 5.5 5.5 7.5 7.5 11 17 5.5 5.5 7.5 7.5 9.3 9.3 15 18.6 NO 1 1 1 1 1 NC 1 1 1 1 1 [No.] 10 10 10 10 10 10 1 1 [Kg] 0.37 0.37 0.37 0.37 0.37 0.37 0.60 0.60 SS94009. SS94099. SS94618. SS94619. SS94011. SS94101. SS94012. SS94620.

MN25/32

MN45/65

45 65

80 100

12.5

25

25 37

2 2

2 2

1 1

1.20 1.20

SS94013. SS94639.

18.6 33.5

80 MN80/95/110/140 95 110 140 185 225 MN185/225 265 325 400 550 MN265/325/400/550

140 160 160 160 250 300 350 400 425 650

22 25 30 40 55 63 80 90 110 160

40 45 55 75 90 110 147 180 200 315

51 59 75 90 110 132 180 200 250

1)

2 2 2 2 2 2 2 2 2 2

2 2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1 1

3.10 3.10 3.10 3.10 5.30 5.30 9.80 9.80 9.80 10.00

SS94672. SS94673. SS94036. SS94627. CS94003. CS94001. SS94674. SS94648. SS94043. SS94767.

DC operation 16 16 MN 16dc * .or Voltage suffix refer page 6/7 1) Data available on request
6/2

30 30

7.5 7.5

1 1

0.68 0.68

SS94649. SS94650.

CONTACTORS - TYPE MN
Conformance to IS 13947 (Part 4/Sec.1) and IEC:60947-4-1

WIDE BAND CONTACTORS

Suitable for applications where wide fluctuations in control supply voltage are observed. Wide band operation 55-110% Contactor Type Ie AC-3 Ie AC-1 Motor rating at 50Hz,415V Built in auxiliary contacts Qty per Packing Wt approx. per Contactor Catalogue No. *

AC operation [A] 9 9 12 12 16 16 [A] 25 25 30 30 30 30 [KW] 4 4 5.5 5.5 7.5 7.5 NO 1 1 1 NC 1 1 1 [No.] 10 10 10 10 10 10 [Kg] 0.37 0.37 0.37 0.37 0.37 0.37 SS94771. SS94772. SS94773. SS94774. SS94679. SS94680.

MN9/12/16W

25

45

11

10

0.60

SS94655.

MN25W * .or Voltage suffix refer page 6/7

CONTACTORS .OR CAPACITOR SWITCHING

Conformance to IS 13947 (Part 4/Sec.1) and IEC:60947-4-1
Suitable for capacitor switching of single capacitor as well as auto-switching of a bank of capacitors. Increases the life of capacitors by reducing the switching surge. 2-auxillary contact built-in. Contactor Type Ie AC-1 Built in auxiliary contacts Qty per Packing Wt approx. per Cont. Catalogue No. *

CONTACTORS - TYPE MN

AC-6b

AC operation kVAR 10 MN16C [A] 25 NO 1 NC 1 [No.] 1 [Kg] 0.62 SS94624.

MN32C * .or Voltage suffix refer page 6/7

6/3

25

50

1.00

SS94652.

ACCESSORIES
Auxillary Contact Block Ie AC-15 at 415V [A] Ie AC-12 [A] Auxiliary contact combinations NO 1 2 1 4 3 2 1 NC 1 1 2 1 2 3 4 Qty per Packing [No.] 10 10 10 10 10 10 10 10 10 10 Wt approx.per accessory [Kg] 0.10 SS94715OOOO SS94716OOOO SS94080OOOO SS94081OOOO SS94082OOOO SS94083OOOO SS94084OOOO SS94085OOOO SS94086OOOO SS94087OOOO Catalogue No.

4 MNA1 .or contactor type MN9,MN12,MN16 MN9W,MN12W,MN16W MN25,MN32,MN25W (Top mounted)

10

10

1 1

1 1

0.05

MNA4 .or contactor type MN 45/65 (Side mounted)

SS94094OOOO1) SS94095OOOO1) SS94096OOOO2) SS94097OOOO2)

4 MNA6 .or contactor type MN80, MN95, MN110, MN140, MN185, MN225, MN265, MN325, MN400, MN550 (Side mounted) Surge Suppressor

10

1 1

1 1

0.05

SS94090OOOO1) SS94091OOOO1) SS94092OOOO2) SS94093OOOO2)

.or Contactor type

Rated control voltage

Qty per Packing [No.] 5

Wt approx. per accessory [Kg] 0.022

Catalogue No.

7s MN9,MN12,MN16 MN25,MN32 MN16C,MN32C MN45,MN65 MN16dc MN80,MN95 MN110,MN140 MN185,MN225 MN265 MN325 MN400 24 - 48V 110 - 240V 360-415V 24 - 48Vdc 110 - 220Vdc 110V 220-240V 360-525V 110V 220-240V 360-525V

SS94623 JOOO SS94623 BOOO SS94623 DOOO SS947815OOO SS947812OOO SS94646AOOO SS94646BOOO SS94646DOOO SS94647AOOO SS94647BOOO SS94647DOOO

5 5

0.022 0.15

MNS1/S2/S4/S6

0.15

* No Surge Supressor required for MN550 Contactor. 1) Provided along with Contactor 2) Additional auxiliary contact block to make 4NO+4NC combination
6/4

ACCESSORIES
Mechanical Interlock .or Contactor type Qty per Packing [No.] Wt approx. per accessory [Kg] Catalogue No.

MN9,MN12,MN16 MN9W,MN12W,MN16W MN25,MN32,MN25W MN-M1 MN16C,MN32C

0.04

SS94071OOOO

MN16dc1)

SS94766OOOO

MN45 MN65 MN-M4

0.45

SS94014OOOO

MN80 MN95 MN110 MN140 MN-M6

2.90

SS94670OOOO

MN1851) MN225 MN-M7 MN265 MN325 MN400 MN550 MN-M8

1)

CS94006OOOO

5.50

SS94671OOOO

Note : 1) To be released.
6/5

SPARES
SPARE COILS
.or Contactor type Qty per Packing [No.] Wt approx.per coil [Kg] Catalogue No. *

AC operation MN9-16 MN9,MN12,MN16 MN9W,MN12W,MN16W MN16C MN25,MN32,MN25W MN32C MN25-32 MN45 MN65 MN80 MN95 MN110 MN140 MN185 MN225 MN80-140 MN265 MN325 MN400 MN550 DC operation MN265-400 MN16dc Contacts with mounting parts .or Contactor type Contents Qty per Packing [No.] 25sets 25sets 25sets 25sets 25sets 25sets 10sets 10sets 1set 1set 1set 1set 1set 1set 1set 1set 1set 1set Wt approx.per set [Kg] 0.04 0.04 0.04 0.05 0.05 0.05 0.12 0.12 0.3 0.3 0.34 0.4 1 1.1 1.1 Catalogue No. 1 SS94651. 10 0.09 SS94191.

10

0.12

SS94192.

10

0.12

SS94193.

0.20

SS94196.

MN45-65

6
1 0.20 CS94002.

0.64

SS94202.

0.70

SS94718.

SPARE KITS

MN9,MN9W MN12,MN12W MN16,MN16dc MN16C,MN16W MN25 MN25W MN32,MN32C MN45 MN65 MN80 MN95 MN110 MN140 MN185 MN225 MN265 MN325 MN400 MN550 * .or Voltage suffix refer page 6/7

Set of 3 moving contacts and 6 fixed contacts with hardware.

SS94702OOOO SS94625OOOO SS94703OOOO SS94704OOOO SS94678OOOO SS94626OOOO SS94654OOOO SS94710OOOO SS94675OOOO SS94676OOOO SS94166OOOO SS94628OOOO CS94005OOOO CS94004OOOO SS94677OOOO SS94170OOOO SS94172OOOO SS94719OOOO
6/6

Catalogue No. suffixes for rated control voltages

ORDERING IN.ORMATION:
Example for Contactor : MN9 Contactor - 240V, 50Hz Ordering Information - SS94009BOOO AC operation Rated control voltage 7s VAC Coils at 50 Hz 24 42 110 220 240 360 380 415 525 DC operation Rated control voltage (7s VDC 24 42 48 110 220 GOOO HOOO AOOO KOOO BOOO COOO LOOO DOOO MOOO Contactor type MN16dc GOOO HOOO AOOO KOOO BOOO COOO LOOO DOOO MOOO GOOO HOOO AOOO KOOO BOOO COOO LOOO DOOO MOOO GOOO HOOO AOOO KOOO BOOO DOOO MOOO AOOO KOOO BOOO DOOO MOOO AOOO KOOO BOOO DOOO MOOO AOOO KOOO BOOO DOOO Contactor type MN9,MN12,MN16 MN9W,MN12W,MN16W MN16C MN25,MN32 MN25W MN32C MN45 MN65 MN80 MN95 MN110 MN140 MN185 MN225 MN265 MN325 MN400 MN550 Example for Spare Coil : MN16 Spare Coil - 360V, 50Hz Ordering Information - SS94191COOO

4OOO 6OOO 5OOO 1OOO 2OOO

Note : 60Hz coils available on request.

6/7

POWER CONTACTORS - TYPE ML

Conformance to IS 13947 (Part 4/Sec.1) and IEC:60947-4-1
Rugged construction for reliable operating in high ambients,humidity,undervoltage conditions. Built in 2NO+2NC auxiliary contacts. Contactor Type Ie AC-3 Ie AC-1 Motor rating at 50Hz,415V Built in auxiliary contacts Qty per Packing Wt approx.per Contactor Catalogue No. *

AC operation [A] [A] [KW] NO NC [No.] [Kg]

12 16 25 ML0/1/1.5

16 25 25

5.5 7.5 11

2 2 2

2 2 2

10 10 10

0.50 0.50 0.50

SS90975. SS90851. SS91851.

32 40 ML2/3

40 45

15 22

2 2

2 2

10 10

0.95 0.95

SS90701. SS90721.

70 110 ML4/6

100 125

37 55

2 2

2 2

1 1

2.90 3.00

SS90910. SS90921.

200 300 ML10/12

250 400

110 168

2 2

2 2

1 1

9.00 9.2

SS90935. SS91010.

* .or voltage suffix refer page 6/11

6/8

ACCESSORIES
Auxiliary Contact Block Ie AC-15 at 415V [A] Ie AC-12 [A] Auxiliary contact combinations NO NC Qty per Packing [No.] Wt approx.per accessory [Kg] Catalogue No.

10

10

0.10

SS91494OOOO

.or contactor type ML4/6 (Side mounted)

6
.or contactor type ML10/12 (Side mounted)

10

10

0.10

SS91474OOOO

ML4/6/10/12 contactors are available with built in 2NO+2NC auxiliary contact block. Additional 1NO+1NC block can be fitted on either side ,providing 4NO+4NC auxiliary contacts.

6/9

SPARES
SPARE COILS
.or Contactor type Qty per Packing [No.] Wt approx.per coil [Kg] Catalogue No. *

AC operation ML0 ML1 ML1.5 ML1-1.5 ML2 ML3 10 0.22 SS90545. 10 0.076 SS90873.

ML4 ML2-3 ML6

0.31

SS91258.

ML10 ML12

1.20

SS91011.

ML4-6

SPARE KITS

Contacts with mounting parts .or Contactor type Contents Qty per Packing [No.] Wt approx.per set [Kg] Catalogue No.

ML0 ML1 ML1.5 ML1-1.5 ML2 ML3 ML4 ML2-3 ML6 ML10 ML12 ML4-6

Set of 3 moving contacts and 6 fixed contacts with hardware.

50sets 50sets 50sets 50sets 50sets 25sets 25sets 1set 1set

0.04 0.05 0.05 0.05 0.06 0.18 0.24 1.10 1.20

SS90978OOOO SS90896OOOO SS91467OOOO SS90544OOOO SS90848OOOO SS91660OOOO SS91670OOOO SS90936OOOO SS91127OOOO

* .or voltage suffix refer page 6/11

6/10

Catalogue No. suffixes for rated control voltages

ORDERING IN.ORMATION:
Example for Contactor : ML2 Contactor - 240V, 50Hz Ordering Information - SS90701BOOO AC operation Rated control voltage 7s VAC Coils at 50 Hz 12 24 42 110 220 .OOO GOOO HOOO AOOO KOOO BOOO ROOO COOO LOOO POOO MOOO HOOO AOOO KOOO BOOO ROOO COOO LOOO POOO MOOO AOOO KOOO BOOO DOOO MOOO AOOO KOOO BOOO DOOO MOOO Contactor type ML0 ML1 ML1.5 ML2 ML3 ML4 ML6 ML10 ML12 Example for Spare Coil : ML4 Spare Coil - 110V, 50Hz Ordering Information - SS91258AOOO

220/230 240 240/250 320 360 380 415 415/440 525

6/11

CONTROL CONTACTORS - TYPE MN

Conformance to IS 13947 (Part 5/Sec.1) and IEC:60947-5-1
Suitable to have maximum 8 NO to 8 NC Contact combinations. Suitable for snap fit mounting on 35mm Din rail. Alphanumeric terminal marking eliminates wiring error. Contactor Type Ie AC-1 Ie AC-15 Built in auxiliary contacts Qty per Packing Wt approx.per Contactor Catalogue No. *

AC operation [A] 10 4 NO 4 3 2 1 NC 1 2 3 4 [No.] 10 [Kg] 0.39 SS94660. SS94661. SS94662. SS94663. SS94664.

MN0 AC DC operation 10 4

MN0 DC * .or Voltage suffix refer page 6/15

4 3 2 1

1 2 3 4

10

0.68

SS94665. SS94666. SS94667. SS94668. SS94669.

CONTROL CONTACTORS - TYPE MM

Suitable to have as many as 25 convertible contact combinations using addon blocks. Ergnomical design gives mounting of contactors side by side with ease of inspection of contacts. Clear distinction between NO and NC contacts from front by a red dot on NC contact. Contactor Type Ie AC-3 Ie AC-1 Ie AC-15 Built in auxiliary contacts Qty per Packing Wt approx.per Contactor Catalogue No. *

AC operation [A] 7.5 7.5 [A] 10 10 4 4 NO 2 8 7 6 5 MM00/01 AC DC operation 10 10 4 4 2 8 7 6 5 MM00/01 DC * .or Voltage suffix refer page 6/15
6/12

NC 2 1 2 3 4

[No.] 10 10

[Kg] 0.43 0.48 SS92002. SS92010. SS92011. SS92012. SS92013. SS92014.

2 1 2 3 4

10 10

0.65 0.65

SS92007. SS92820. SS92821. SS92822. SS92823. SS92824.

ACCESSORIES
Auxiliary Contact Block Ie AC-15 at 415V [A] Ie AC-12 [A] Auxiliary contact combinations NO 1 2 1 4 3 2 1 NC 1 1 2 1 2 3 4 Qty per Packing [No.] 10 10 10 10 10 10 10 10 10 10 Qty per Packing [No.] 5 Wt approx.per accessory [Kg] 0.10 SS94715OOOO SS94716OOOO SS94080OOOO SS94081OOOO SS94082OOOO SS94083OOOO SS94084OOOO SS94085OOOO SS94086OOOO SS94087OOOO Catalogue No. Catalogue No.

10

MNA1 .or contactor type MN0ac,MN0dc (Top mounted) Surge Suppressor .or Contactor type

Rated control voltage

6
MN0 ac MN0 dc

Wt approx. per accessory [Kg] 0.022

7s 24 - 48V 110 - 240V 360 - 415V 24 - 48Vdc 110 - 220Vdc .or Contactor type

SS94623 JOOO SS94623 BOOO SS94623 DOOO SS947815OOO SS947812OOO

MNS1/S2 Mechanical Interlock

Qty per Packing [No.]

Wt approx. per accessory [Kg] 0.04 Wt approx.per accessory [Kg] 0.005

Catalogue No.

MN0ac MN0dc Auxillary Contact Block Ie AC-15 415V,50Hz [A] 4 Auxiliary contact combinations NO 1

5 1 Qty per Packing [No.] 10

SS94071OOOO SS94766OOOO Catalogue No.

SS92020OOO

.or contactor type MM00AC,MM00DC Rail mounting kit .or Contactor type Version Qty per Packing [No.] MM00 ac MM01 ac with mounting screws and washers. 10 Wt approx. per accessory [Kg] 0.032 SS91355OOOO Catalogue No.

6/13

SPARES
SPARE COILS
.or Contactor type Qty per Packing [No.] Wt approx.per coil [Kg] Catalogue No. *

AC operation MM00 MM01 MN0 MN0 10 0.09 SS94191. 10 0.09 SS91353.

DC operation MM00 MM01 MN0 10 SS94651. 10 0.30 SS91354.

SPARE KITS

Contacts with mounting parts .or Contactor type Contents Qty per Packing [No.] Wt approx.per set [Kg] Catalogue No.

MM00AC MM01AC

Set of 3 moving contacts and 6 fixed contacts with hardware.

1 set

0.04

SS91352OOOO

MN0 MN0 DC

1) 1)

* .or voltage suffix refer page 6/15 1) Available on request.

6/14

Catalogue No. suffixes for rated control voltages

ORDERING IN.ORMATION:
Example for Contactor : MN0 Contactor - 240V, 50Hz Ordering Information - SS94660BOOO AC operation Rated control voltage 7s VAC Coils at 50 Hz 24 42 110 220 240 GOOO HOOO AOOO BOOO DOOO Contactor type MM00 MM01 MN0 GOOO HOOO AOOO BOOO DOOO GOOO HOOO AOOO KOOO BOOO COOO DOOO MOOO Contactor type MM00 MM01 MN0 Example for Spare Coil : MN0 Spare Coil - 360V, 50Hz Ordering Information - SS94191COOO

360 415 525 DC operation Rated control voltage 7s VDC 24 42 48 110 220

4OOO 6OOO 5OOO 1OOO 2OOO

4OOO 6OOO 5OOO 1OOO 2OOO

4OOO 6OOO 5OOO 1OOO 2OOO

6/15

TECHNICAL DATA - TYPE MN

MN9/12/16/25/32 Contactors
MN9 Mechanical Life Rated insulation voltage Rated impulse withstand Service temperature Utilisation category 3ph,415V,50Hz AC-1 AC-2 AC-3 AC-4 Operational current,Ie, for AC-4 at 415V,50Hz for 200,000 cycles. Making capacity A A A kVAR 5.5 450 200 6 7.1 450 250 7.5 8 450 250 9 13.5 480 400 15 16 550 500 20 25A 9A 4kw/5.5hp/9A 4kw/5.5hp/9A 30A 12A 5.5kw/7.5hp/12A 5.5kw/7.5hp/12A 30A 16A 45A 25A 55A 32A 17kw/22.5hp/32A 17kw/22.5hp/32A Opns. 7i 7imp
o

MN12 15x106 690V 8KV -20 to +55

MN16 15x106 690V 8KV -20 to +55

MN25 10x106 690V 8KV -20 to +55

MN32 10x106 690V 8KV -20 to +55

15x106 690V 8KV -20 to +55

7.5kw/10hp/16A 11kw/15hp/25A 7.5kw/10hp/16A 11kw/15hp/25A

Breaking capacity Capacitor switching delta connected,415V,50Hz Max. frequency of operating op.cycles/hr

Mechanical AC1 AC2 AC3 AC4

7200 3000 750 750 300

7200 3000 750 750 300

7200 3000 750 750 300

7200 3000 750 750 300

7200 3000 750 750 300

Stator duty-415V,50Hz - Duty factor 20% 40% 60% Rotor duty-delta connected-Duty factor 20% 40% 60% Main terminal capacity Lug(mm2) Wires(mm )
2

14.5A 14.5A 11A

18A 18A 15A

24A 24A 20A

38A 38A 31A

48A 48A 40A

22A 22A 16A 1x6 2x4

27A 27A 22A 1x6 2x4

36A 36A 30A 1x6 2x4

57A 57A 46A 1x10 2x6

72A 72A 66A 1x10 2x6

Aux.terminal capacity Wires(mm2) Pick up time Drop off time Operating limits Coil Consumption at 50Hz Pick-up Hold-on VA VA 68 11 68 11 68 11 100 15 100 15
6/16

2x2.5 10-22 7-18 80-110

2x2.5 10-22 7-18 80-110

2x2.5 10-22 7-18 80-110

2x2.5 13-25 8-18 80-110

2x2.5 13-25 8-18 80-110

msec msec (%Uc)

TECHNICAL DATA - TYPE MN

MN45/65 Contactors
MN45 Mechanical Life Rated insulation voltage Rated impulse withstand Service temperature Utilisation category 3ph,415V,50Hz AC-1 AC-2 AC-3 AC-4 Operational current,Ie, for AC-4 80A 45A 25kw/34hp/45A 25kw/34hp/45A 100A 65A 33.5kw/45hp/65A 30kw/40hp/63A Opns. 7i 7imp
o

MN65 10x106 690V 8KV -20 to +55

10x106 690V 8KV -20 to +55

at 415V,50Hz for 200,000 cycles. Making capacity

A A A kVAR

24 900 750 30

28.5 900 750 35

Breaking capacity Capacitor switching delta connected,415V,50Hz Max. frequency of operating op.cycles/hr

Mechanical AC1 AC2 AC3 AC4

3600 3000 750 750 300

3600 3000 750 750 300

Stator duty-415V,50Hz - Duty factor 20% 40% 60% Rotor duty-delta connected-Duty factor 20% 40% 60% Main terminal capacity Lug(mm2) Wires(mm2) Aux.terminal capacity Wires(mm2) Pick up time Drop off time Operating limits Coil Consumption at 50Hz Pick-up Hold-on
6/17

68A 68A 56A

98A 98A 81A

102A 102A 84A 1x35

147A 147A 121A 1x35

2x2.5 15-35 10-25 80-110

2x2.5 15-35 10-25 80-110

msec msec (%Uc)

VA VA

190 21

190 21

TECHNICAL DATA - TYPE MN

MN80/95/110/140 Contactors
MN80 Mechanical Life Rated insulation voltage Rated impulse withstand Service temperature Utilisation category 3ph,415V,50Hz AC-1 AC-2 AC-3 AC-4 Operational current,Ie, for AC-4 at 415V,50Hz for 200,000 cycles. Making capacity A A A kVAR 43 1450 1300 55 53 1680 1400 65 58 1680 1400 65 66 1800 1600 70 140A 80A 40kw/54hp/80A 40kw/54hp/80A 160A 95A 45kw/60hp/95A 45kw/60hp/95A 160A 110A 55kw/75hp/110A 55kw/75hp/110A 160A 140A 75kw/100hp/140A 75kw/100hp/140A Opns. 7i 7imp
o

MN95 10x106 1000V 8KV -20 to +55

MN110 10x106 1000V 8KV -20 to +55

MN140 10x106 1000V 8KV -20 to +55

10x106 1000V 8KV -20 to +55

Breaking capacity Capacitor switching delta connected,415V,50Hz Max. frequency of operating op.cycles/hr

Mechanical AC1 AC2 AC3 AC4

3600 3000 750 750 300

3600 3000 750 750 300

3600 3000 750 750 300

3600 3000 750 750 300

Stator duty-415V,50Hz - Duty factor 20% 40% 60% Rotor duty-delta connected-Duty factor 20% 40% 60% Main terminal capacity Lug(mm2) Wires(mm2) Aux.terminal capacity Wires(mm2) Pick up time Drop off time Operating limits Coil Consumption at 50Hz Pick-up Hold-on VA VA 550 36 550 36 550 36 550 36
6/18

120A 120A 100A

143A 143A 120A

165A 165A 135A

210A 210A 175A

180A 180A 150A 1x120

214A 214A 180A 1x120

250A 250A 203A 1x120

315A 315A 262A 1x120

2x2.5 20-40 10-25 80-110

2x2.5 20-40 10-25 80-110

2x2.5 20-40 10-25 80-110

2x2.5 20-40 10-25 80-110

msec msec (%Uc)

TECHNICAL DATA - TYPE MN

MN185/225 Contactors
MN185 Mechanical Life Rated insulation voltage Rated impulse withstand Service temperature Utilisation category 3ph,415V,50Hz AC-1 AC-2 AC-3 AC-4 Operational current,Ie, for AC-4 250A 185 A 90kw/125 hp/185A 90kw/125 hp/160 A 300A 225 A 110kw/150hp/225A 100kw/136hp/200 A Opns. 7i 7imp
oC

MN225 10x106 1000 V 8KV -20 to +55

10x106 1000 V 8KV -20 to +55

at 415V,50Hz for 200,000 cycles. Making capacity

90 2220 1850

100 2400 2000

Breaking capacity Capacitor switching delta connected,415V,50Hz Max. frequency of operating op.cycles/hr kVAR Mechanical AC1 AC2 AC3 AC4 Stator duty-415V,50Hz - Duty factor 20% 40% 60% Rotor duty-delta connected-Duty factor 20% 40% 60% Main terminal capacity Lug(mm2) Wires(mm2) Aux.terminal capacity Wires(mm2) Pick up time Drop off time Operating limits Coil Consumption at 50Hz Pick-up Hold-on Note : 1) Data available on request.
6/19

100 3600 3000 750 750 250

125 3600 3000 750 750 250

1)

1)

1)

1)

1x185

1x185

2 x 2.5 20-45 10-25 80-110

2 x 2.5 20-45 10-25 80-110

msec msec (%Uc)

VA VA

960 56

960 56

TECHNICAL DATA - TYPE MN

MN265/325/400/550 Contactors
MN265 Mechanical Life Rated insulation voltage Rated impulse withstand Service temperature Utilisation category 3ph,415V,50Hz AC-1 AC-2 AC-3 AC-4 Operational current,Ie, for AC-4 at 415V,50Hz for 200,000 cycles. Making capacity A A A kVAR 120 4000 3200 150 140 4500 4000 175 150 4500 4000 175 150 5500 4500 250 350A 265A 147kw/265A 130kw/175hp/235A 400A 325A 180kw/245hp/325A 140kw/190hp/250A 425A 400A 200kw/270hp/400A 150kw/200hp/275A 650A 550A 315kw/425hp/ 550A 200kw/270hp/550A Opns. 7i 7imp
o

MN325 10x106 1000V 8KV -20 to +55

MN400 10x106 1000V 8KV -20 to +55

MN550 10x106 1000V 8KV -5 to +55

10x106 1000V 8KV -20 to +55

Breaking capacity Capacitor switching delta connected,415V,50Hz Max. frequency of operating op.cycles/hr

Mechanical AC1 AC2 AC3 AC4

3600 3000 750 750 150

3600 3000 750 750 150

3600 3000 750 750 150

1200 750 750 150 150

Stator duty-415V,50Hz - Duty factor 20% 40% 60% Rotor duty-delta connected-Duty factor 20% 40% 60% Main terminal capacity Lug(mm2) Wires(mm )
2

332A 332A 282A

407A 407A 340A

500A 500A 425A

1)

498A 498A 423A 2x240/1x300

610A 610A 510A 2x240/1x300

750A 750A 635A 2x240/1x300 2x240/1x300

1)

Aux.terminal capacity Wires(mm2) Pick up time Drop off time Operating limits Coil Consumption at 50Hz Pick-up Hold-on Note : 1) Data available on request.
6/20

2x2.5 20-45 10-25 80-110

2x2.5 20-45 10-25 80-110

2x2.5 20-45 10-25 80-110

2x2.5 50-60 150-170 80-110

msec msec (%Uc)

VA VA

2100 95

2100 95

2100 95

1000 25

TECHNICAL DATA - TYPE MN

MN9W/12W/16W/25W Contactors
MN9W Mechanical Life Rated insulation voltage Rated impulse withstand Service temperature Utilisation category 3ph,415V,50Hz AC-1 AC-2 AC-3 AC-4 25A 9A 4kw/5.5hp/9A 4kw/5.5hp/9A 450 200 6 30A 12A 5.5kw/7.5hp/12A 5.5kw/7.5hp/12A 450 250 7.5 30A 16A 7.5kw/10hp/16A 7.5kw/10hp/16A 450 250 9 45A 25A 11kw/15hp/25A 11kw/15hp/25A 480 400 15 Opns. 7i 7imp
o

MN12W 10x106 690V 8KV -20 to +55

MN16W 10x106 690V 8KV -20 to +55

MN25W 10x106 690V 8KV -20 to +55

10x106 690V 8KV -20 to +55

Making

capacity

A A kVAR

Breaking capacity Capacitor switching delta connected,415V,50Hz Max. frequency of operating op.cycles/hr

Mechanical AC1 AC2 AC3 AC4

7200 3000 750 750 300

7200 3000 750 750 300

7200 3000 750 750 300

7200 3000 750 750 300

Stator duty-415V,50Hz - Duty factor 20% 40% 60% Rotor duty-delta connected-Duty factor 20% 40% 60% Main terminal capacity Lug(mm2) Wires(mm )
2

14.5A 14.5A 11A

18A 18A 15A

24A 24A 20A

38A 38A 31A

22A 22A 16A 1x6 2x2.5

27A 27A 22A 1x6 2x2.5

36A 36A 30A 1x6 2x2.5

57A 57A 46A 1x10 2x4

Aux.terminal capacity Wires(mm2) Pick up time Drop off time Operating limits Coil Consumption at 50Hz Pick-up Hold-on
6/21

2x2.5 10-22 7-18 55-110

2x2.5 10-22 7-18 55-110

2x2.5 10-22 7-18 55-110

2x2.5 13-25 8-18 55-110

msec msec (%Uc)

VA VA

68 11

68 11

68 11

100 15

TECHNICAL DATA - TYPE MN

MN16C/32C Contactors
MN16C Mechanical Life Rated insulation voltage Rated impulse withstand Service temperature Opns. 7i 7imp
o

MN32C 10x106 690V 8KV -20 to +55 25kVAR 80-110 100 15

10x106 690V 8KV -20 to +55 10kVAR 80-110

Utilisation category 3ph,415V,50Hz AC-6b Operating limits (% Uc) Coil Consumption at 50 Hz pick-up Coil Consumption at 50 Hz hold-on VA VA

68 11

6/22

TECHNICAL DATA - TYPE ML

ML0/1/1.5/2/3 Contactors
ML0 Mechanical Life Rated insulation voltage Rated impulse withstand Service temperature Utilisation category 3ph,415V,50Hz AC-1 AC-2 AC-4 Operational current,Ie, for AC-4 16A 12A 4.5kw/6hp/10A 25A 16A 7.5Kw/10hp/16A 25A 25A 40A 32A 45A 40A 22kw/30hp/40A 22kw/30hp/40A Opns. 7i 7imp
o

ML1 15x106 500V 8KV -20 to +55

ML1.5 15x106 500V 8KV -20 to +55

ML2 10x106 500V 8KV -20 to +55

ML3 10x106 500V 8KV -20 to +55

15x106 500V 8KV -20 to +55

AC-3 5.5kw/7.5hp/12A 7.5kw/10hp/16A

11kw/15hp/25A 15kw/20hp/32A 9kw/12.5hp/21A 15kw/20hp/32A

at 415V,50Hz for 300,000 cycles. Making capacity

A A A kVAR

6.3 80 70 3

10 80 70 8

13.5 80 70 13

17 80 70 20

22 80 70 20

Breaking capacity Capacitor switching delta connected,415V,50Hz Max. frequency of operating op.cycles/hr

Mechanical AC1 AC2 AC3 AC4

3000 3000 750 750 250

3000 3000 750 750 250

3000 3000 750 750 250

2000 750 750 750 250

2000 750 750 750 250

Stator duty-415V,50Hz - Duty factor 20% 40% 60% Rotor duty-delta connected-Duty factor 20% 40% 60% Main terminal capacitY Lug(mm2) Wires(mm2) Aux.terminal capacity Wires(mm2) Pick up time Drop off time Operating limits Coil Consumption at 50Hz Pick-up Hold-on VA VA 60 15 60 15 60 15 120 20 120 20 msec msec (%Uc) 2x2.5 5-35 5-20 80-110 2x2.5 5-35 5-20 80-110 2x2.5 5-35 5-20 80-110 2x2.5 10-35 5-25 80-110 2x2.5 10-35 5-25 80-110 23A 23A 19A 16 2x10 36A 36A 30A 16 2x10 56A 56A 44A 16 2x10 72A 72A 60A 50 2x25 90A 90A 75A 50 2x25 15.5A 15.5A 12.5A 24A 24A 20A 37A 37A 30A 48A 48A 40A 60A 60A 50A

6/23

TECHNICAL DATA - TYPE ML

ML4/6/10/12 Contactors
ML4 Mechanical Life Rated insulation voltage Rated impulse withstand Service temperature Utilisation category 3ph,415V,50Hz AC-1 AC-2 AC-3 AC-4 Operational current,Ie, for AC-4 at 415V,50Hz for 300,000 cycles. Making capacity A A A kVAR 35 80 70 50 46 80 70 65 90 80 70 125 112 80 70 175 100A 70A 37kw/50hp/70A 37kw/50hp/70A 125A 110A 55kw/75hp/110A 45kw/60hp/85A 250A 200A 110kw/150hp/200A 110kw/150hp/200A 400A 300A 168kw/225hp/300A 140kw/190hp/250A Opns. 7i 7imp
o

ML6 10x106 660V 8KV -20 to +55

ML10 10x106 660V 8KV -20 to +55

ML12 10x106 660V 8KV -20 to +55

10x106 660V 8KV -20 to +55

Breaking capacity Capacitor switching delta connected,415V,50Hz Max. frequency of operating op.cycles/hr

Mechanical AC1 AC2 AC3 AC4

1200 1000 500 750 250

1200 750 500 750 250

1200 750 500 500 250

1200 750 500 500 250

Stator duty-415V,50Hz - Duty factor 20% 40% 60% Rotor duty-delta connected-Duty factor 20% 40% 60% Main terminal capacity Lug(mm2) Wires(mm )
2

95A 95A 78A

165A 165A 135A

250A 250A 206A

375A 375A 310A

157A 157A 118A 50

270A 270A 206A 95

370A 370A 310A 240

560A 560A 465A 240

Aux.terminal capacity Wires(mm2) Pick up time Drop off time Operating limits Coil Consumption at 50Hz Pick-up Hold-on VA VA 450 50 450 50 1450 85 1450 85
6/24

2x2.5 10-35 10-40 80-110

2x2.5 10-35 10-40 80-110

2x2.5 15-45 5-25 80-110

2x2.5 15-45 5-25 80-110

msec msec (%Uc)

TECHNICAL DATA - TYPE MM

MM contactors
MM00-AC Mechanical Life Rated insulation voltage Rated impulse withstand Service temperature Utilisation category 3ph,415V,50Hz AC-1 AC-15 Main terminal capacity Lug(mm2) Wires(mm2) 2x2.5 80-110 2x2.5 80-110 2x2.5 80-110 2x2.5 80-110 10A 4A 10A 4A 10A 4A 10A 4A Opns. 7i 7imp
o

MM01-AC 10x106 690V 8KV -20 to +55

MM00-DC 10x106 690V 8KV -20 to +55

MM01-DC 10x106 690V 8KV -20 to +55

10x106 690V 8KV -20 to +55

Operating limits Coil Consumption at 50Hz Pick-up Hold-on

(%Uc)

85VA 16VA

85VA 16VA

8W

8W

6/25

TECHNICAL DATA - TYPE MN

MN 0 contactors
MN0 ac Mechanical Life Rated insulation voltage, Rated impulse withstand, Service temperature Utilisation category 3ph,415V,50Hz AC-1 AC-15 Operating limits (% Uc) Coil Consumption at 50 Hz pick-up hold-on 68VA 11VA 8W 8W 10A 4A 80-110 10A 4A 80-110 Opns. 7i 7imp
o

MN0 dc 10x106 690V 8KV -20 to +55

10x106 690V 8KV -20 to +55

6/26

ELECTRICAL LI.E CURVES - TYPE MN

MN CONTACTORS

UTILISATION CATEGORY AC-1

UTILISATION CATEGORY AC-2

6/27

ELECTRICAL LI.E CURVES - TYPE MN

MN CONTACTORS

UTILISATION CATEGORY AC-3

UTILISATION CATEGORY AC-4

6/28

ELECTRICAL LI.E CURVES - TYPE ML

ML CONTACTORS

UTILISATION CATEGORY AC-1

UTILISATION CATEGORY AC-2

6/29

ELECTRICAL LI.E CURVES - TYPE ML

ML CONTACTORS

UTILISATION CATEGORY AC-3

UTILISATION CATEGORY AC-4

6/30

TERMINAL ARRANGEMENTS - TYPE MN

POWER CONTACTORS

Note: .or ML contactors the terminal arrangements available on request.

6/31

TERMINAL ARRANGEMENTS - TYPE MN

CAPACITOR CONTACTORS

AUXILIARY CONTACT BLOCKS - TYPE MN A1

Note: .or MN A4 and MN A6 auxiliary contact block terminal arrangements refer page 6/31 shown adjacent to contactor terminal adjustments. i.e. for 1NO+1NC left - 13, 21, 22, 14 1NO+1NC right - 43, 31, 32, 44 1NO+1NC second left - 53, 61, 62, 54 1NO+1NC second right - 83, 71, 72, 84
6/32

TERMINAL ARRANGEMENTS
CONTROL CONTACTORS

Note: .or control contactors MM00 and MM01 (AC/DC) terminal arrangements available on request.
6/33

OVERALL DIMENSIONS
MN9,MN12, MN16, MN9W, MN12W, MN16W CONTACTORS

MN25, MN25W, MN32 CONTACTORS

Note: All dimensions are in mm.

6/34

OVERALL DIMENSIONS
MN45, MN65 CONTACTORS

MN80, MN95, MN110, MN140 CONTACTORS

Note: All dimensions are in mm.

6/35

OVERALL DIMENSIONS
MN185, MN225 CONTACTORS

MN265, MN325,MN400, MN550 CONTACTORS

Note: All dimensions are in mm.

6/36

OVERALL DIMENSIONS
MN16C CONTACTOR

MN32C CONTACTOR

Note: All dimensions are in mm.

6/37

OVERALL DIMENSIONS
MN 0dc , MN16dc CONTACTOR

MN 0ac CONTACTOR

Note: All dimensions are in mm.

6/38

OVERALL DIMENSIONS
ML0, ML1, ML1.5 CONTACTORS

ML2, ML3 CONTACTORS

Note: All dimensions are in mm.

6/39

OVERALL DIMENSIONS
ML4 CONTACTOR

ML6 CONTACTOR

* Provide 12 mm extra for each Add-on block Note: All dimensions are in mm.
6/40

OVERALL DIMENSIONS
ML10, ML12 CONTACTORS

MM00 CONTACTOR

Note: All dimensions are in mm.

6/41

OVERALL DIMENSIONS
MM01 CONTACTOR

MM00dc CONTACTOR

Note: All dimensions are in mm.

6/42