P546 Sotf
P546 Sotf
P546 Sotf
1303
G.SENTHIL ganapathy.senthil@sa.abb.com
Div. / Dept.: Our Ref.: Direct Fax No.:
Dear Sir,
Subject: Proposal for SOFT Enabling/Disabling
The SOTF feature has not been provided in the relay as a separate function in Hadeed
and Jubail South East P546 relays. In order to meet this requirement separate PSL was
proposed by AREVA.It was tested during commissioning stage by AREVA and found
satisfactory. We request SEC-EOA to accept as it is.
As per this LOGIC the SOFT feature will always be present and there is no facility to
DISABLE this Feature. The above mentioned LOGIC has been selected in relay by
GROUP 1, 2 setting.
In order to disable the SOFT feature following procedure shall be adopted. This is to be
followed only for the first time.
1. Start MICOM S1 Software
↓
2. Copy the Setting Values and PSL of GROUP 1 or 2 to GROUP 3
without SOTF PSL
↓
3. Front Port Communication
↓
4. Select the product range
↓
5. Setting Software S & R Courier
↓
6. File
↓
ABB Automation Co. Ltd.
P.O. BOX: 414 RIYADH 11383 SAUDI ARABIA
TEL.: +966 1 265 2112 FAX.: +966 1 265 2580
Telefax
Our ref: Page:
2 of 2
7. New
↓
8. Setting File
↓
9. Device Type
↓
10. P546318B3N0300J
↓
11. Configuration
↓
12. Setting Group→ Select VIA Menu
↓
13. Group 3→ Enabled
Regards,
G.Senthil,
Senior System Engineer,
ABB AUTOMATION CO. LTD,
Riyadh