0% found this document useful (0 votes)
82 views4 pages

TVL Ictcssgrade12 q4 Module6

This document discusses two lessons on inspecting and testing computer systems and networks. The first lesson covers occupational health and safety procedures for maintaining network systems, including identifying hazards, clearing areas, and reporting issues. The second lesson describes using network diagnostic tools to inspect computer systems and networks for issues and monitoring network performance. Activities are included to arrange safety procedures and download diagnostic tools to check network connections.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
82 views4 pages

TVL Ictcssgrade12 q4 Module6

This document discusses two lessons on inspecting and testing computer systems and networks. The first lesson covers occupational health and safety procedures for maintaining network systems, including identifying hazards, clearing areas, and reporting issues. The second lesson describes using network diagnostic tools to inspect computer systems and networks for issues and monitoring network performance. Activities are included to arrange safety procedures and download diagnostic tools to check network connections.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

CSS 12

Quarter 4 – Module 6
Inspect and test the computer systems and networks

What I Need to Know


The module is divided into 2 lessons, namely:

 OHS Procedures in Maintaining Network Systems


 Maintenance of the Computer Systems and Networks

After going through this module, you are expected to:


1. Follow OHS procedures in maintaining network systems
2. Use network diagnostic tool in maintaining computer systems and networks

Lesson OHS Procedures in Maintaining


1 Network Systems

What is It
In general, testing is finding out how well something works. In terms of human beings, testing tells
what level of knowledge or skill has been acquired. In computer hardware and software
development, testing is used at key checkpoints in the overall process to determine whether
objectives are being met. For example, in software development, product objectives are sometimes
tested by product user representatives. When the design is complete, coding follows and the
finished code is then tested at the unit or module level by each programmer; at the component level
by the group of programmers involved; and at the system level when all components are combined
together. At early or late stages, a product or service may also be tested for usability.

Safety Precautions

Occupational Health and Safety (OHS) Policy –An Information and Communication Technology
(ICT) student should know how to behave when working in the computer laboratory, and how to
implement a safe way of accomplishing every task. Safety practices should be learned early and
always adhered to in working with any electrical and electronic device, including personal
computers and its peripherals. This is for your protection as well as to the people working with you,
and for the devices that you are using. The basis for this process begins with Occupational Health
and Safety
Policies.

Occupational Safety and Health (OSH) is a planned system of working to prevent illness and
injury where you work by recognizing and identifying hazards and risks. Health and safety
procedure is the responsibility of all persons in the computer and technology industries. You must
identify the hazards where you are working and decide how dangerous they are. Eliminate the
hazard or modify the risk that it presents.

Occupational Health and Safety Standards

Each student has a responsibility to their colleagues and their organization to report and act upon
any potential workplace hazard. Students need to be aware of the type of hazards that are possibly
present in their work environment.

Procedures

1. Identify the hazard.


2. Clear the area close to the hazard.
3. Partition the hazard off or clearly identify the area to protect other people from harm.
4. If the hazard can easily and safely cleared, then do so.
If not…
5. Report the hazard to the appropriate person (such as teacher in charge, principal etc.) to obtain
assistance.
6. Following clearing of the hazard fill out the correct documentation to assist in identifying
improved
practice to reduce further incidence of hazards.

What’s More
ACTIVITY 1.1

Directions: Arrange the procedures in handling hazard by numbering them from 1-6.

______ Clear the area close to the hazard.


______ If the hazard can easily and safely cleared, then do so.
______ Following clearing of the hazard fill out the correct documentation to assist in identifying
improved practice to reduce further incidence of hazards.
______ Identify the hazard.
______ Partition the hazard off or clearly identify the area to protect other people from harm.
______ Report the hazard to the appropriate person (such as teacher in charge, principal etc.) to
obtain assistance.

Assessment
Directions: List the Occupational Health and Safety Procedures in Computer Systems Servicing.
Write your answers on your answer sheet.

Lesson Maintenance of the Computer


2 Systems and Networks

What is It
Diagnostic Software for Network

Network Diagnostic Tool is an efficient and reliable tool to help you determine and identify the
possible network issues that prevent you from using your computer to the fullest. With Network
Diagnostic Tool, you can quickly identify the problems you may be having, which sometimes occur
with home computers that are connected to the web via cable or DSL modems.

The Network Diagnostic Tool is a utility that analyzes your system and performs a wide range of
tests to determine the cause of your connectivity issues by investigating all your network-related
services and programs, looking into your IP configuration and default gateway, but it will also test
out
the DNS and Firewall.

Moreover, Network Diagnostic Tool can also run an Internet connection validation test, in the
interest of discovering the underlying problems and gathering all the information you may need
with a minimal level of effort for you.

The program will assist you during the troubleshooting operation, enabling you to save significant
amounts of time by sparing you from finding the causes of your network problems by yourself.
There are free available network diagnostic tools that can be download online, such as Wireshark
and TCP dump. It will help you monitor your network performance and highlight discrepancies that
might point to underlying malicious activity.
What’s More
ACTIVITY 2.1

Directions: To check the vulnerability or stability of your network connection, go to the internet
and download a free network diagnostic tool.

 Go to any search engine and type – network diagnostic tool.


 After downloading the application, run the setup file of the program and install it into your
computer.
 If the program was already installed, run the application. Take note of the diagnosis. Do some
action if there are problems or errors encountered.

Assessment
Directions: Visit the link on https://www.youtube.com/watch?v=sOrM3wF6Yoc. Write in your
answer sheet the instructions given on how to fix all network and Internet issues in
Windows 10/8/7.
Key Answers

Lesson 1
What’s more

2
4
6
1
3
5

References
Amparonians. n.d. weebly. Accessed January 26, 2021. https://tinyurl.com/y5ctahp2.

You might also like