EN

CD Receiver
FR
CDE-124SXM/CDE-123/CDE-122
ES

• OWNER’S MANUAL
Please read before using this equipment.
• MODE D’EMPLOI
Veuillez lire avant d’utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.

ALPINE ELECTRONICS MARKETING, INC. ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. ALPINE ITALIA S.p.A.
1-1-8 Nishi Gotanda, 161-165 Princes Highway, Hallam Viale C. Colombo 8, 20090 Trezzano
Shinagawa-ku, Victoria 3803, Australia Sul Naviglio (MI), Italy
Tokyo 141-0031, Japan Phone 03-8787-1200 Phone 02-484781
Phone 03-5496-8231
ALPINE ELECTRONICS GmbH ALPINE ELECTRONICS DE ESPAÑA, S.A.
ALPINE ELECTRONICS OF AMERICA, INC. Wilhelm-Wagenfeld-Str. 1-3, 80807 München, Germany Portal de Gamarra 36, Pabellón, 32
19145 Gramercy Place, Torrance, Phone 089-32 42 640 01013 Vitoria (Alava)-APDO 133, Spain
California 90501, U.S.A. Phone 945-283588
Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF U.K. LTD.
Alpine House ALPINE ELECTRONICS (BENELUX) GmbH
ALPINE ELECTRONICS OF CANADA, INC. Fletchamstead Highway, Coventry CV4 9TW, U.K. Leuvensesteenweg 510-B6,
777 Supertest Road, Toronto, Phone 0870-33 33 763 1930 Zaventem, Belgium
Ontario M3J 2M9, Canada Phone 02-725-13 15
Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone 01-48638989

Designed by ALPINE Japan

68-16909Z42-B
 Contents ENGLISH
Sound Setting
Operating Instructions Adjusting Subwoofer Level/Bass Level/Mid
Level/Treble Level/Balance (Between Left and
WARNING Right)/Fader (Between Front and Rear)/
WARNING ....................................................... 6 Loudness/Defeat.......................................................14
CAUTION ........................................................ 6 Sound Setting ............................................................15
PRECAUTIONS ............................................... 6 Equalizer Presets (FACTORY EQ) ......................15
Adjusting the Parametric Equalizer Curve
Getting Started (3BAND EQ).............................................................15
Setting the Bass Control ..........................................15
Accessory List ...............................................................9
Setting the Mid Control ...........................................15
Turning Power On and Off.......................................9 Setting the Treble Control.......................................16
Source Selection..........................................................9 Adjusting the High Pass Filter ..........................16
Detaching and Attaching the Front Panel .........9 Turning Subwoofer ON/OFF.............................16
Detaching ..................................................................9 Adjusting the Low Pass Filter ...........................16
Attaching ...................................................................9 Setting the Subwoofer Phase...........................16
Initial System Start-Up............................................ 10 Setting the Subwoofer System ........................16
Adjusting Volume .................................................... 10 Other Functions
Setting the Time ....................................................... 10
Displaying the Text...................................................17
Radio About the indication display............................17
About “Text” ...........................................................17
Listening to Radio.................................................... 11
Using the Front AUX Input Terminal..................17
Presetting Stations Manually............................... 11
Set your favorite source to the FAV button
Presetting Stations Automatically...................... 11
(FAV SETUP).................................................................18
Tuning to Preset Stations ...................................... 11 Set your favorite source .....................................18
Frequency Search Function.................................. 11 Recall your favorite source ...............................18
CD/MP3/WMA/AAC SETUP
Playback ...................................................................... 12 Setting ..........................................................................18
Repeat Play................................................................. 12 BLUETOOTH Setting (CDE-123 only)..............19
M.I.X. (Random Play) ............................................... 12 Setting the BLUETOOTH Connection ..................19
Searching for CD Text ............................................. 12 General Setting .....................................................19
Set your favorite source to the FAV button
Folder/File Name Search
(FAV SETUP) ..................................................................19
(concerning MP3/WMA/AAC).............................. 12 Playing MP3/WMA/AAC Data (PLAY MODE).....19
Folder Name Search mode ............................... 12 Turning Mute Mode On/Off (INT MUTE) ............19
File Name Search mode..................................... 13 Setting the AUX REAR Setup Mode
Quick Search .............................................................. 13 (AUX-R SET) (CDE-123 only)....................................19
Setting the AUX SETUP Mode................................20
About MP3/WMA/AAC........................................... 13
Setting the AUX Level (AUX GAIN) .......................20
Terminology........................................................... 14 Setting the AUX REAR Level (AUX-R GAIN)
(CDE-123 only).............................................................20
Connecting to an External Amplifier
(POWER IC)....................................................................20
Demonstration ............................................................20
Display Setting ......................................................21
Dimmer Control ..........................................................21
Scroll Type Setting .....................................................21
Scroll Setting (TEXT SCR) .........................................21

3-EN
 Contents ENGLISH
SiriusXM (SXM) Satellite Radio Setting iPod/iPhone (optional)
(CDE-124SXM/CDE-123 only) (Only when Connecting an iPod/iPhone..................................26
a SiriusXM Tuner is connected and the
Setting the iPod Control ........................................27
current source is Satellite Radio
(SIRIUSXM))............................................................. 21 Playback .......................................................................27
Managing Artist and Song Alerts .........................21 Searching for a desired Song ...............................27
Setting the Favorite Sports Team Alerts ............21 Direct Search Function ...........................................28
Setting the Parental Control...................................22 Select Playlist/Artist/Album/Genre/
Confirming the strength of the SiriusXM
Composer/Episode ..................................................28
signal...............................................................................22
iPod/iPhone and USB Setting ......................... 22 Alphabet Skip Function..........................................28
Setting the USB Search Mode................................22 Search Position Memory ........................................28
Setting the USB Skip function ...............................22 Random Play Shuffle (M.I.X.).................................28
Setting the Pandora Source....................................22
Repeat Play .................................................................29
Setting the Pandora Volume..................................22
Displaying the Text...................................................29
Flash Memory/Portable audio player
Pandora Radio (iPhone) (Optional)
(optional)
Listening to Pandora ...............................................29
Connecting the Flash Memory (optional)....... 23
When connect Flash Memory to Front USB “Thumbs” Feedback.................................................30
Connection Terminal .......................................... 23 Searching for a Desired Station ...........................30
Remove Flash Memory from Front USB QuickMix ......................................................................30
Connection Terminal .......................................... 23 Bookmarking a Desired Song or Artist .............30
Using the Flash Memory/Portable audio Creating a New Station...........................................30
player Banking Function ....................................... 23 Search Position Memory ........................................31
Playback ...................................................................... 24 Changing the Display..............................................31
Searching for a desired Song............................... 24
Searching by Tag information ......................... 24 SiriusXM Satellite Radio Operation
Searching by artist name.........................................24 (CDE-124SXM, supplied; CDE-123,
Searching by Explorer (FILE NAME) mode optional)
(Flash Memory only) ........................................... 25
Receiving Channels with the SiriusXM Tuner
Repeat Play................................................................. 25
(CDE-124SXM, supplied; CDE-123,
M.I.X. (Random Play) ............................................... 25 optional).......................................................................31
Select Playlist/Artist/Album/Genre/ Checking the SiriusXM Radio ID Number ........32
Composer/Folder ..................................................... 26
Storing Channel Presets .........................................32
Alphabet Skip Function
Tuning Channels using Presets............................32
(Tag search mode only) ......................................... 26
Category Browsing...................................................32
Quick Search ............................................................. 26
Storing the desired Artist/Song...........................32
Search Position Memory ....................................... 26
Receiving and Tuning to an Alert .......................33
Search Function ........................................................33
Using Jump Memory and Jump Recall
function........................................................................33
Instant Replay Function..........................................33
Using iTunes tagging ..............................................33
Changing the Display..............................................34

4-EN
 Contents ENGLISH
Information
In Case of Difficulty.................................................. 34
Basic.......................................................................... 34
Radio......................................................................... 34
CD .............................................................................. 34
MP3/WMA/AAC .................................................... 35
Audio ........................................................................ 35
iPod ........................................................................... 35
Indication for CD Player..................................... 35
Indication for Flash Memory/Portable audio
player........................................................................ 35
Indication for iPod Mode................................... 36
Indication for Pandora Radio Mode .............. 36
SiriusXM Advisory Messages
(CDE-124SXM/CDE-123 only) .......................... 36
Specifications ............................................................ 38

Installation and Connections

WARNING ..................................................... 39
CAUTION ...................................................... 39
PRECAUTIONS ............................................. 39
Installation.................................................................. 40
Removal................................................................... 40
iPod/iPhone Connection
(sold separately) ................................................... 41
When connect to Front USB Connection
Terminal .........................................................................41
When connect to Rear USB Connector
(CDE-123 only).............................................................41
Remove the iPod/iPhone.........................................41
Rear Flash Memory Connection
(CDE-123 only) (sold separately) .................... 41
Connect Flash Memory ............................................41
Remove Flash Memory.............................................41
Connections............................................................... 42

LIMITED WARRANTY

5-EN
Operating Instructions
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
WARNING Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Center for repairing.
WARNING
This symbol means important instructions. Failure
PRECAUTIONS
to heed them can result in serious injury or death.
Product Cleaning
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY Use a soft dry cloth for periodic cleaning of the product. For more
FROM SAFELY DRIVING YOUR VEHICLE. severe stains, please dampen the cloth with water only. Anything
Any function that requires your prolonged attention should only be else has the chance of dissolving the paint or damaging the plastic.
performed after coming to a complete stop. Always stop the vehicle
in a safe location before performing these functions. Failure to do so
Temperature
may result in an accident. Be sure the temperature inside the vehicle is between +60°C
(+140°F) and −10°C (+14°F) before turning your unit on.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE
Moisture Condensation
NOISES WHILE DRIVING.
You may notice the CD playback sound wavering due to
Excessive volume levels that obscure sounds such as emergency
condensation. If this happens, remove the disc from the player and
vehicle sirens or road warning signals (train crossings, etc.) can be
wait about an hour for the moisture to evaporate.
dangerous and may result in an accident. LISTENING AT LOUD
VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING
Damaged Disc
DAMAGE.
Do not attempt to play cracked, warped, or damaged discs. Playing
DO NOT DISASSEMBLE OR ALTER. a bad disc could severely damage the playback mechanism.
Doing so may result in an accident, fire or electric shock.
Maintenance
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service Station
(Check with your dealer if you are not sure.) Failure to do so may
for servicing.
result in fire, etc.
Never Attempt the Following
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF
Do not grip or pull out the disc while it is being pulled back into the
CHILDREN. player by the automatic reloading mechanism.
Swallowing them may result in serious injury. If swallowed, consult Do not attempt to insert a disc into the unit when the unit power is
a physician immediately. off.

USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES.

Failure to do so may result in fire or electric shock.

DO NOT BLOCK VENTS OR RADIATOR PANELS.

Doing so may cause heat to build up inside and may result in fire.

USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.

Use for other than its designed application may result in fire,
electric shock or other injury.
Inserting Discs
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION Your player accepts only one disc at a time for playback. Do not
SLOTS OR GAPS. attempt to load more than one disc.
Doing so may result in personal injury or damage to the product. Make sure the label side is facing up when you insert the disc.
“ERROR” will be displayed on your player if you insert a disc
incorrectly. If “ERROR” continues to be displayed even though the
CAUTION disc has been inserted correctly, push the RESET switch with a
pointed object such as a ballpoint pen.
This symbol means important instructions. Failure Playing a disc while driving on a very bumpy road may result in
to heed them can result in injury or material skips, but this will not scratch the disc or damage the player.
property damage.

6-EN
 If the surface is heavily soiled, dampen a clean, soft cloth in a
New Discs solution of mild neutral detergent before cleaning the disc.
To prevent the CD from jamming, “ERROR” is displayed if discs
with irregular surfaces are inserted or if discs are inserted
incorrectly. When a new disc is ejected immediately after initial
loading, use your finger to feel around the inside of the center hole
and outside edge of the disc. If you feel any small bumps or
irregularities, this could inhibit proper loading of the disc. To
remove the bumps, rub the inside edge of the hole and outside edge
of the disc with a ballpoint pen or other such instrument, then Disc Accessories
insert the disc again. There are various accessories available on the market for protecting
the disc surface and improving sound quality. However, most of
Center Hole Center Hole them will influence the thickness and/or diameter of the disc. Using
New Disc
such accessories can cause the disc to be out of standard
specifications and may create operational problems. We
Outside
recommend not using these accessories on discs played in Alpine
Bumps
(Bumps) CD players.

Irregular Shaped Discs

Be sure to use round shape discs only for this unit and never use any
special shape discs.
Use of special shape discs may cause damage to the mechanism. Transparent Sheet Disc Stabilizer

On handling Compact Discs (CD/CD-R/CD-RW)

• Do not touch the surface.
• Do not expose the disc to direct sunlight.
• Do not affix stickers or labels.
• Clean the disc when it is dusty.
Installation Location • Make sure that there are no bumps around the disc.
Make sure this unit will not be installed in a location subjected to: • Do not use commercially available disc accessories.
• Direct sun and heat Do not leave the disc in the car or the unit for a long time. Never
• High humidity and water expose the disc to direct sunlight. Heat and humidity may damage
• Excessive dust the CD and you may not be able to play it again.
• Excessive vibrations
To customers using CD-R/CD-RW
Correct Handling • If a CD-R/CD-RW cannot be played back, make sure the last
recording session was closed (finalized).
Do not drop the disc while handling. Hold the disc so you will not
• Finalize the CD-R/CD-RW if necessary, and attempt playback again.
leave fingerprints on the surface. Do not affix tape, paper, or
gummed labels to the disc. Do not write on the disc.
About media that can be played
CORRECT The following table shows which discs can be played on which
models.

CD CD-TEXT MP3 WMA AAC

CDE-124SXM
  
/CDE-122

INCORRECT CORRECT CDE-123     

Use only compact discs with the label side showing the CD logo
marks below.

Disc Cleaning
Fingerprints, dust, or soil on the surface of the disc could cause the If you use non-standard compact discs, correct performance cannot
CD player to skip. For routine cleaning, wipe the playing surface be guaranteed.
with a clean, soft cloth from the center of the disc to the outer edge. You can play CD-Rs (CD-Recordables)/CD-RWs
(CD-ReWritables) which have been recorded only on audio devices.
You can also play CD-Rs/CD-RWs containing MP3 formatted
audio files.
• Some of the following CDs may not play on this unit:
Flawed CDs, CDs with fingerprints, CDs exposed to extreme
temperatures or sunlight (e.g., left in the car or this unit), CDs
recorded under unstable conditions, CDs on which a recording failed

7-EN
 or a re-recording was attempted, copy-protected CDs which do not • Fix the Portable audio player in a location where driver operation will
conform to the audio CD industry standard. not be hindered.
• Use discs with compressed audio files written in a format compatible • Portable audio player may not function correctly at high or low
with this unit. For details, refer to “About MP3/WMA/AAC” on temperature.
page 13. • Depending on the settings of the Portable audio player type, memory
• Data files, other than audio, on the disc are ignored and are not state or encoding software, the unit may not play back or display
played back. properly.
• If the Portable audio player has an MSC/MTP setting, set to MTP.
Protecting the USB Connection Terminal • A Portable audio player in which data is stored by USB Mass Storage
• Only USB Flash Memory devices, Portable audio player or iPod/ may not be playable on the unit.
iPhone can be connected to the USB connection terminal on this • Depending on the Portable audio player settings, USB Mass Storage
unit. Correct performance using other USB products cannot be may be supported. For setting, refer to the Owner’s Manual of the
guaranteed. A USB hub is not supported. player.
• Do not connect Flash Memory over 20 mm wide to front USB • The unit can play back MP3/WMA files synchronized by Windows
terminal. Media Player (Ver. 7, 8, 9), and are then forwarded to the player. The
Also, avoid connecting Flash Memory to the front USB terminal and “mp3” or “wma” extensions are playable.
connecting Front Aux at the same time. • If data is not synchronized by Windows Media Player and is
• If a USB device is inserted in the unit, it projects out and may be a forwarded in another way, the unit may not be able to correctly play
danger while driving. back the files.
Use a commercially available USB extension cable, and connect it in a • A file that is copy-protected (copyright protection) cannot be played
safe way. back.
• Depending on the connected Flash Memory device, the unit may not • It is recommended to back up important data on a personal
function or some functions may not be performed. computer.
• The audio file format that can be played back on the unit is MP3/ • Do not remove the USB device while playback is in progress. Change
WMA/AAC. SOURCE to something other than USB, then remove the USB device
• Artist/song name, etc., can be displayed, however characters may not to prevent possible damage to its memory.
be correctly displayed. • When Nokia is used as a Portable audio player:
Not all the Nokia mobile phones can be used as Portable audio
On Handling USB Flash Memory players.
If the Nokia mobile phone fails to work as a Portable audio player
while connected, set it to Mass Storage mode and reconnect to this
CAUTION unit. For details, refer to Owner’s Manual of the Nokia mobile phone.
Alpine accepts no responsibility for lost data, etc., even if data,
etc., is lost while using this product.
• Windows Media, and the Windows logo are trademarks, or
• To prevent malfunction or damage, note the following points. registered trademarks of Microsoft Corporation in the United States
Read the Flash Memory Owner’s Manual thoroughly. and/or other countries.
• Fix the Flash Memory in a location where driver operation will not be • iPhone, iPod, iPod classic, iPod nano, iPod touch, and iTunes are
hindered. trademarks of Apple Inc., registered in the U.S. and other countries.
• Flash Memory may not function correctly at high or low temperature. • “Made for iPod,” and “Made for iPhone,” mean that an electronic
• Use only certified USB Flash Memory Devices. Please pay attention accessory has been designed to connect specifically to iPod, or
that even certified Flash Memory, may not function correctly iPhone, respectively, and has been certified by the developer to meet
depending on its type or state. Apple performance standards. Apple is not responsible for the
• Flash Memory function is not guaranteed. Use Flash Memory operation of this device or its compliance with safety and regulatory
according to the terms of agreement. standards.
• Depending on the settings of the Flash Memory type, memory state • Pandora and the Pandora logo are registered trademarks of Pandora
or encoding software, the unit may not play back or display properly. Media, Inc. All rights reserved.
• A file that is copy-protected (copyright protection) cannot be played Due to music licensing restrictions, the Pandora radio service is only
back. available in the United States.
• Flash Memory may take time to start playback. If there is a particular This device will control Pandora when connected to a compatible
file other than audio in the Flash Memory, it may take considerable iPhone.
time before the file is played back or searched. • SiriusXM and all related marks and logos are trademarks of
• The unit can play back “mp3”, “wma” or “m4a” file extensions. SiriusXM Radio Inc. and its subsidiaries. All rights reserved.
• Do not add the above extensions to a file other than audio data. This • The BLUETOOTH® word mark and logos are registered
non-audio data will not be recognized. The resulting playback may trademarks owned by the Bluetooth SIG, Inc. and any use of such
contain noise that can damage speakers and/or amplifiers. marks by Alpine Electronics, Inc. is under license.
• It is recommended to back up important data on a personal • “MPEG Layer-3 audio coding technology licensed from Fraunhofer
computer. IIS and Thomson.”
• Do not remove the USB device while playback is in progress. Change • “Supply of this product only conveys a licence for private,
SOURCE to something other than USB, then remove the USB device non-commercial use and does not convey a license nor imply any
to prevent possible damage to its memory. right to use this product in any commercial (i.e. revenue-generation)
real time broadcasting (terrestrial, satellite, cable and/or any other
On Handling Portable audio player media), broadcasting/streaming via internet, intranets and/or other
• The unit can control a Portable audio player with the USB interface. networks or in other electronic content distribution systems, such as
Playable audio file formats are MP3 and WMA. pay-audio or audio-on-demand applications. An independent
• Portable audio player function is not guaranteed. Use Portable audio license for such use is required. For details, please visit http://
player according to the terms of agreement. Read the Portable audio www.mp3licensing.com”
player Owner’s Manual thoroughly.

8-EN
 *4 The Pandora source can be displayed only when PANDORA is

Getting Started set to ON. For details, refer to “Setting the Pandora Source” on
page 22. For CDE-123, during PANDORA F source, you can
switch to PANDORA R source by pressing BAND/F/R; for
CDE-124SXM/CDE-122, the source name is PANDORA.
*5 Displayed only when BT IN is set to HFP+AUDIO, refer to
SOURCE/ Rotary encoder/ /ENTER
“Setting the BLUETOOTH Connection” on page 19. (CDE-123
AUDIO/SETUP
only)
FAV  *6 Refer to “Using the Front AUX Input Terminal” on page 17.
For CDE-123, during AUX source, you can switch to AUX
REAR source by pressing BAND/F/R when ON is set in “Setting
the AUX REAR Setup Mode (AUX-R SET)” (refer to “Setting the
AUX REAR Setup Mode (AUX-R SET) (CDE-123 only)” on
page 19).
Note
• You can recall your favorite source by pressing FAV directly. For details,
  FUNC./VIEW refer to “Set your favorite source to the FAV button (FAV SETUP)” on
BAND/ F/R page 18.

* The illustration is for CDE-123.

Detaching and Attaching the Front Panel
Accessory List
Detaching
• Head Unit ..................................................................................1
• Power Cable ..............................................................................1 1 Turn off the unit power.
• USB Cable (CDE-123 only)........................................................1
• Interface cable for iPod (CDE-123 only) .................................1 2 Press e (Release) at the lower left side until the front
• SiriusXM Tuner (CDE-124SXM only)........................................1 panel pops out.
• Mounting Sleeve ......................................................................1
• Carrying Case............................................................................1 3 Grasp the left side of the front panel and pull it out.
• Bracket key ...............................................................................2
• Screw (M5 × 8) ..........................................................................4
• Owner’s Manual..................................................................1 set

Turning Power On and Off

Notes
Press SOURCE to turn on the unit. • The front panel may become hot in normal usage (especially the
Note connector terminals on the back of the front panel). This is not a
• The unit can be turned on by pressing any other button except  and malfunction.
e (Release). • To protect the front panel, place it in the supplied carrying case.
• When detaching the front panel, do not apply excessive force as it may
Press and hold SOURCE for at least 2 seconds to turn result in malfunction.
off the unit.
Note
Attaching
• The first time power is turned on, the volume will start from level 12.
1 Insert the right side of the front panel into the main unit.
Align the groove on the front panel with the projections
on the main unit.
Source Selection
2 Push the left side of the front panel until it locks firmly into
Press SOURCE to change the source. the main unit.
TUNER  SIRIUSXM*1  DISC  USB FRONT*2/iPod FRONT*3 
PANDORA F*4  BT AUDIO*5  AUXILIARY*6  TUNER
*1 Displayed only when a SiriusXM Tuner is connected.
(CDE-124SXM/CDE-123 only)
*2 Displayed only when no iPod/iPhone is connected. For
CDE-123, during USB FRONT source, you can switch to USB
REAR source by pressing BAND/F/R; for CDE-124SXM/
CDE-122, the source name is USB AUDIO.
*3 Displayed only when the iPod/iPhone is connected. For
CDE-123, during iPod FRONT source, you can switch to iPod
REAR source by pressing BAND/F/R; for CDE-124SXM/
CDE-122, the source name is iPod.

9-EN
Notes Notes
• Before attaching the front panel, make sure that there is no dirt or dust • To synchronize the clock to another clock/watch or radio time
on the connector terminals and no foreign object between the front announcement, press and hold ENTER for at least 2 seconds after
panel and the main unit. setting the “hour”. Minutes will reset to “00”. If the display shows over
• Attach the front panel carefully, holding the sides of the front panel to “30” minutes when you do this, the time will advance one hour.
avoid pushing buttons by mistake. • Press  to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Initial System Start-Up Controllable with Remote Control
This unit can be controlled with an optional Alpine remote control.
Be sure to press the RESET switch when using the unit for the first time, For details, consult your Alpine dealer.
after changing the car battery, etc. Point the optional remote control transmitter at the remote control
sensor.
1 Turn off the unit power.
Remote control sensor
2 Remove the detachable front panel.

3 Press RESET with a ballpoint pen or similar pointed object.

RESET switch
Connectable to Steering Remote Control Interface Box (CDE-123
only)
You can operate this unit from the vehicle’s control unit when an
Adjusting Volume Alpine Steering Remote Control Interface Box (optional) is
connected. For details, contact your Alpine dealer.

Turn the Rotary encoder until the desired sound is

obtained.

Setting the Time

1 Press and hold AUDIO/SETUP for at least 2 seconds to
activate the SETUP mode.

2 Turn the Rotary encoder to select the GENERAL mode,

and then press ENTER.
BLUETOOTH*1  GENERAL  AUDIO  DISPLAY  SXM SETUP*2
 iPod & USB
*1 Displayed only when INT MUTE is set to OFF, and the mode is
set to other than BT AUDIO. (CDE-123 only)
*2 Displayed only when a SiriusXM Tuner is connected and the
current source is Satellite Radio (SIRIUSXM). (CDE-124SXM/
CDE-123 only)

3 Turn the Rotary encoder to select CLOCK ADJ, and then

press ENTER.
The time indication will blink.

4 Turn the Rotary encoder to adjust the hours while the

time indication is blinking, and then press ENTER.

5 Turn the Rotary encoder to adjust the minutes while the

time indication is blinking.

6 Press and hold AUDIO/SETUP for at least 2 seconds to

return to normal mode.

10-EN
 Presetting Stations Automatically
Radio
1 Press BAND repeatedly until the desired radio band is
SOURCE/ Rotary encoder//ENTER displayed.

  2 Press and hold TUNEA.ME for at least 2 seconds.
The frequency on the display continues to change while the
automatic memory is in progress. The tuner will automatically
seek and store 6 strong stations in the selected band. They will
be stored into preset buttons 1 to 6 in order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No.1.
Note
TUNE/A.ME • If no stations are stored, the tuner will return to the original station you
Preset buttons
BAND (1 through 6) were listening to before the auto memory procedure began.

* The illustration is for CDE-123.

Tuning to Preset Stations
Listening to Radio
Select the band, and then press any one of the station
preset buttons (1 through 6) that has your desired radio
1 Press SOURCE to select TUNER mode. station in memory.
The display shows the band, preset number and frequency of
2 Press BAND repeatedly until the desired radio band is the station selected.
displayed.
F1 (FM1)  F2 (FM2)  AM  F1 (FM1)

3 Press TUNEA.ME to select the tuning mode. Frequency Search Function

DX SEEK (Distance mode)  SEEK (Local mode)  OFF (Manual
mode)  DX SEEK You can search for a radio station by its frequency.

Note
• The initial mode is Distance mode.
1 Press and hold ENTER for at least 2 seconds in Radio
mode to activate Frequency search mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
2 Turn the Rotary encoder to select the desired frequency.
Local mode:
Only strong stations will be automatically tuned in (Automatic
3 Press ENTER to receive the selected frequency.
Seek Tuning). Note
Manual mode: • Press  in the search mode to cancel. Or, the search mode will be
The frequency is manually tuned in steps (Manual tuning). canceled if no operation is performed for 10 seconds.

4 Press  or  to tune in the desired station.

Holding down  or  will change the frequency
continuously.

Presetting Stations Manually

While receiving the station that you want to store, press
and hold, for at least 2 seconds, any one of the preset
buttons (1 through 6) into which you wish to store the
station.
The display shows the band, preset number and station
frequency memorized.
Notes
• A total of 18 stations can be stored in the preset memory (6 stations for
each band; FM1, FM2 and AM).
• If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.

11-EN
 • The playback time may not be correctly displayed when a VBR

CD/MP3/WMA/AAC (Variable Bit Rate) recorded file is played back.

Repeat Play
SOURCE/ Rotary encoder/ /ENTER

    1 Press a 4.
The song is played back repeatedly.
a*1  a*2  (off )  a
*1 Only a track is repeatedly played back.
*2 Only files in a folder are repeatedly played back. (MP3/WMA/
AAC mode only)

2 To cancel repeat play, select (off) with the above

 procedure.

* The illustration is for CDE-123.

M.I.X. (Random Play)
Playback 1 Press 5s.
The songs are played back in random sequence.
The following table shows which discs can be played on which models.
s*1  s ALL*2  (off )  s
CD CD-TEXT MP3 WMA AAC *1 Only files in a folder are played back in random sequence.
CDE-124SXM (MP3/WMA/AAC mode only)
/CDE-122
   *2 The tracks/files are played back in random sequence.

CDE-123      2 To cancel M.I.X. play, select (off) with the above procedure.

1 Insert a disc with the label side facing up.

The disc will be pulled into the unit automatically. Searching for CD Text
On discs utilizing CD Text, songs can be searched and played by using
their recorded titles. For discs without CD Text, searches are made using
the track numbers associated with each song.

1 Press ENTER during play.

This will set the search mode, and the “” indicator lights up.

Note
2 Turn the Rotary encoder to select the desired track, and
then press ENTER.
• When a disc is already inserted, press SOURCE to switch to the
DISC mode. This will play the selected track.
Notes
2 While playing back MP3/WMA/AAC, press  or  to select
• Press  in the search mode to cancel. Or, the search mode is canceled
the desired folder. if no operation is performed for 60 seconds.
• When CD Text Search is made during M.I.X. play, the M.I.X. play
3 Press  or  to select the desired track (file). mode will be canceled.
Pressing and holding  or  will fast backward/fast
forward track continuously.

4 To pause playback, press .

Folder/File Name Search (concerning MP3/
Pressing  again will resume playback. WMA/AAC)
5 To eject the disc, press . Folder and file names may be searched and displayed during playback.
Notes
• Do not remove a CD during its eject cycle. Do not load more than one Folder Name Search mode
disc at a time. A malfunction may result from doing either.
• The “” indicator lights up when a disc is inserted.
• Three-inch (8 cm) CDs can not be used.
1 During MP3/WMA/AAC playback, press ENTER to
activate the search mode.
• WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from the The “” indicator lights up.
iTunes Store and files that are copy-protected (copyright protection)
cannot be played back on this unit. 2 Turn the Rotary encoder to select Folder Name Search
• The track display for MP3/WMA/AAC data playback is the file mode, and then press ENTER.
numbers recorded on the disc.

12-EN
3 Turn the Rotary encoder to select the desired folder. What is MP3?
MP3, whose official name is “MPEG-1 Audio Layer 3,” is a compression
4 Press and hold ENTER for at least 2 seconds to play standard prescribed by the ISO, the International Standardization
Organization and MPEG which is a joint activity institution of the IEC.
back the first file in the selected folder.
MP3 files contain compressed audio data. MP3 encoding is capable of
Notes compressing audio data at extremely high ratios, reducing the size of
music files to as much as one-tenth their original size. This is achieved
• Press and hold  for at least 2 seconds in the search mode to cancel.
while still maintaining near CD quality. The MP3 format realizes such
Or, the search mode is canceled if no operation is performed for high compression ratios by eliminating the sounds that are either
60 seconds. inaudible to the human ear or masked by other sounds.
• To search for files in the Folder Name Search mode, press ENTER.
Files in the folder may be searched. What is WMA?
• Press  to exit Folder Name Search mode in step 3 in order to select WMA, or “Windows Media™ Audio,” is compressed audio data.
File Name Search mode. WMA is similar to MP3 audio data and can achieve CD quality sound
• The root folder is displayed as “\ROOT”. with small file sizes.
• When Folder Name Search is made during M.I.X. play, the M.I.X. play
mode will be canceled. What is AAC?
AAC is the abbreviation for “Advanced Audio Coding,” and is a basic
format of audio compression used by MPEG2 or MPEG4.
File Name Search mode
Method for creating MP3/WMA/AAC files
1 During MP3/WMA/AAC playback, press ENTER to Audio data is compressed using software with MP3/WMA/AAC codecs.
activate the search mode. For details on creating MP3/WMA/AAC files, refer to the user’s manual
for that software.
The “” indicator lights up. MP3/WMA/AAC files that are playable on this device have the file
extensions “mp3” / “wma” / “m4a”. Files with no extension cannot be
2 Turn the Rotary encoder to select File Name Search mode, played back (WMA ver. 7.1, 8 and 9 are supported). Protected files are
and then press ENTER. not supported, neither are raw AAC files (using the “.aac” extension).
There are many different versions of the AAC format. Confirm that the
3 Select the desired file by turning the Rotary encoder.
software being used conforms to the acceptable formats listed above.
It’s possible that the format may be unplayable even though the
extension is valid.
4 Press ENTER to play back the selected file. Playback of AAC files encoded by iTunes is supported.
Notes Supported playback sampling rates and bit rates
• Press and hold  for at least 2 seconds in the search mode to cancel. MP3
Or, the search mode is canceled if no operation is performed for Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz,
60 seconds. 12 kHz, 11.025 kHz, 8 kHz
• Press  in the search mode to return to the previous mode. Bit rates: 8 - 320 kbps
• When File Name Search is made during M.I.X. play, the M.I.X. play
mode will be canceled. WMA
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz
Bit rates: 48 - 192 kbps
Quick Search AAC
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz, 16 kHz,
12 kHz, 11.025 kHz, 8 kHz
You can search for tracks (files).
Bit rates: 16 - 320 kbps
1 Press and hold ENTER for at least 2 seconds in the CD/ This device may not play back correctly depending on sampling rates.
MP3/WMA/AAC mode to activate Quick Search mode.
ID3 tags/WMA tags
The “” indicator lights up.
This device supports ID3 tag v1 and v2, and WMA tag.
2 Turn the Rotary encoder to select a desired track (file),
If tag data is in an MP3/WMA/AAC file, this device can display the title
(track title), artist name, and album name ID3 tag/WMA tag data.
and then press ENTER. This device can only display single-byte alphanumeric characters (up to
The selected track is played back immediately. 30 for ID3 tags and up to 15 for WMA tags) and the underscore. For
non-supported characters, “NO SUPPORT” is displayed.
Note If information contains characters other than ID3 tag information, the
• Press  in the search mode to cancel. Or, the search mode is canceled audio file may not be played back.
The tag information may not be correctly displayed, depending on the
if no operation is performed for 10 seconds.
contents.

Producing MP3/WMA/AAC discs

About MP3/WMA/AAC MP3/WMA/AAC files are prepared, then written to a CD-R or CD-RW
using CD-R writing software. A disc can hold up to 510 files/folders
(including Root Folders), and the maximum number of folders is 255.
Playback may not be performed if a disc exceeds the limitations
CAUTION described above.
Except for private use, duplicating audio data (including MP3/
WMA/AAC data) or distributing, transferring, or copying it, Media supported
whether for free or for a fee, without permission of the copyright The media that this device can play back are CD-ROMs, CD-Rs, and
holder is strictly prohibited by the Copyright Act and by CD-RWs.
international treaty.
Corresponding File Systems
This device supports discs formatted with ISO9660 Level 1 or Level 2.
Under the ISO9660 standard, there are some restrictions to remember.

13-EN
 The maximum nested folder depth is 8 (including the root directory).
The number of characters for a folder/file name is limited.
Valid characters for folder/file names are letters A-Z (all caps), numbers
0-9, and ‘_’ (underscore).
Sound Setting
This device also can play back discs in Joliet, Romeo, etc., and other
standards that conform to ISO9660. However, sometimes the file
names, folder names, etc., are not displayed correctly. Rotary encoder/ /ENTER
AUDIO/SETUP
Formats supported
This device supports CD-ROW XA, Mixed Mode CD, Enhanced CD
(CD-Extra) and Multi-Session.
This device cannot correctly play back discs recorded with Track At
Once or packet writing.

Order of files
Files are played back in the order that the writing software writes them
to the disc. Therefore, the playback order may not be what is expected.
Verify the writing order in the software’s documentation. The playback
order of the folders and files is as follows. 

* The illustration is for CDE-123.

Root folder
Adjusting Subwoofer Level/Bass Level/Mid
Level/Treble Level/Balance (Between Left
and Right)/Fader (Between Front and Rear)/
Loudness/Defeat
1 Press AUDIO repeatedly to choose the desired mode.
Each press changes the mode as follows:
SUBW*1  BASS*2  MID*2  TREBLE*2  BAL  FAD  LOUD*2
 DEFEAT  VOLUME  SUBW
*1 When the subwoofer mode is set to OFF, its level cannot be
adjusted, refer to “Turning Subwoofer ON/OFF” on page 16.
*2 Adjustable only when DEFEAT is OFF.

Subwoofer 0 ~ +15
Bass level -7 ~ +7

Folder MP3/WMA/AAC File Mid level -7 ~ +7

Treble level -7 ~ +7
* The folder No./ folder Name will not be displayed if no file is contained Balance L15 ~ R15
in the folder.
Fader R15 ~ F15

Terminology Loudness ON/OFF

Defeat ON/OFF
Bit rate Volume 0 ~ 35
This is the “sound” compression rate specified for encoding. The higher
the bit rate, the higher the sound quality, but also the larger the files. Notes
• If no operation is performed for 5 seconds, the unit automatically
Sampling rate returns to normal mode.
This value shows how many times per second the data is sampled • Loudness introduces a special low- and high-frequency emphasis at low
(recorded). For example, music CDs use a sampling rate of 44.1 kHz, so listening levels. This compensates for the ear’s decreased sensitivity to
the sound is sampled (recorded) 44,100 times per second. The higher bass and treble sound.
the sampling rate, the higher the sound quality, but also the larger the
volume of data. 2 Turn the Rotary encoder until the desired sound is
obtained in each mode.
Encoding
By setting DEFEAT ON, previously adjusted level settings of
Converting music CDs, WAVE (AIFF) files, and other sound files into the
specified audio compression format. BASS, MID, and TREBLE will return to the factory defaults.

Tag
Song information such as track titles, artist names, album names, etc.,
written into MP3/WMA/AAC files.

Root folder
The root folder (or root directory) is found at the top of the file system.
The root folder contains all folders and files. It is created automatically
for all burned discs.

14-EN
 Setting the Bass Control
Sound Setting
1 After selecting BASS from the 3BAND EQ adjustment
You can flexibly customize the unit to suit your own preference and mode, turn the Rotary encoder to select the desired Bass
usage. From the AUDIO SETUP menu, Audio Setting can be modified. setting item, and then press ENTER.
WIDTH (Q)  CENTER FRQ  LEVEL
Use steps 1 to 5 to select one of the setting modes to modify.
See the applicable section below for details about the
selected setting item.
2 Turn the Rotary encoder to select the desired setting
value, and then press ENTER.

1 Press and hold AUDIOSETUP for at least 2 seconds to 3 Press  to return to the previous step.
activate the SETUP mode.
 Setting the Bass Bandwidth (WIDTH (Q))
2 Turn the Rotary encoder to select AUDIO, and then press
ENTER. Turn the Rotary encoder to select the desired bass
BLUETOOTH*1  GENERAL  AUDIO  DISPLAY  SXM SETUP*2 bandwidth.
 iPod & USB WIDE 0.50  MEDIUM 1.00  MEDIUM 1.50  NARROW 2.00
*1 Displayed only when INT MUTE is set to OFF, and the mode is Changes the boosted bass bandwidth to wide or narrow. A wider setting
set to other than BT AUDIO. (CDE-123 only) will boost a wide range of frequencies above and below the center
*2 Displayed only when a SiriusXM Tuner is connected and the frequency. A narrower setting will boost only frequencies near the
current source is Satellite Radio (SIRIUSXM). (CDE-124SXM/ center frequency.
CDE-123 only)
 Setting the Bass Center Frequency (CENTER FRQ)
3 Turn the Rotary encoder to select the desired sound
setting menu, and then press ENTER. Turn the Rotary encoder to select the desired bass center
FACTORY EQ*3/*4  3BAND EQ*3/*5  HPF*3  SUBWOOFER  frequency.
SUBW LPF*6  SUBW PHASE*6  SUBW SYS*6 60 (Hz)  80 (Hz) (Initial setting)  100 (Hz)  120 (Hz)
*3 Adjustment cannot be performed when DEFEAT is set to ON. Emphasizes the displayed bass frequency ranges.
*4 The FACTORY EQ’s setting value and 3BAND EQ’s setting
value are linkage.  Setting the Bass Level
*5 The FACTORY EQ’s setting value and 3BAND EQ’s setting
value are linkage. In step 3, three sound adjustment items (Bass, Turn the Rotary encoder to select the desired bass level
Mid and Treble) can be selected in 3BAND EQ mode, turn the (-7~+7)*.
Rotary encoder to select the desired item, and then press You can emphasize or weaken the bass level.
ENTER to continue to step 4.
* The adjustment can also be made by pressing AUDIO. Refer to
*6 These functions are inoperable when Subwoofer is set to OFF.
“Adjusting Subwoofer Level/Bass Level/Mid Level/Treble Level/
4 Turn the Rotary encoder to change the setting, and then
Balance (Between Left and Right)/Fader (Between Front and
Rear)/Loudness/Defeat” on page 14.
press ENTER.
(e.g. Select SUBWOOFER ON or SUBWOOFER OFF) Setting the Mid Control
5 Press and hold AUDIOSETUP for at least 2 seconds to
1 After selecting MID from the 3BAND EQ adjustment mode,
return to normal mode.
turn the Rotary encoder to select the desired Mediant
Notes setting item, and then press ENTER.
• Pressing  returns to the previous Sound menu mode. WIDTH (Q)  CENTER FRQ  LEVEL
• If no operation is performed for 60 seconds, Sound menu mode is
canceled. 2 Turn the Rotary encoder to select the desired setting
value, and then press ENTER.
Equalizer Presets (FACTORY EQ)
10 typical equalizer settings are preset at the factory for a variety of
3 Press  to return to the previous step.
musical source material.  Setting the Mid Bandwidth (WIDTH (Q))
USER  FLAT  POPS  ROCK  NEWS  JAZZ  ELEC
DANCE  HIP HOP  EASY LIS  COUNTRY  CLASSICAL Turn the Rotary encoder to select the desired Mid
bandwidth.
Adjusting the Parametric Equalizer Curve WIDE 0.75  MEDIUM 1.00  MEDIUM 1.25  NARROW 1.50
(3BAND EQ)
 Setting the Mid Center Frequency (CENTER FRQ)
You can modify the Equalizer settings to create a response curve more
appealing to your personal taste. The setting of Bass, Mid and Treble can Turn the Rotary encoder to select the desired Mid center
be adjusted in this mode. frequency.
500 (Hz)  1.0k (Hz) (Initial setting)  1.5k (Hz)  2.5k (Hz)

15-EN
 Setting the Mid Level
Turning Subwoofer ON/OFF
Turn the Rotary encoder to select the desired Mid level (-7
When the subwoofer is on, you can adjust the subwoofer output level
~ +7)*.
(refer to “Adjusting Subwoofer Level/Bass Level/Mid Level/Treble Level/
You can emphasize or weaken the Mid level. Balance (Between Left and Right)/Fader (Between Front and Rear)/
* The adjustment can also be made by pressing AUDIO. Refer to Loudness/Defeat” on page 14).
“Adjusting Subwoofer Level/Bass Level/Mid Level/Treble Level/
Balance (Between Left and Right)/Fader (Between Front and  Setting item: SUBWOOFER
Rear)/Loudness/Defeat” on page 14.
Setting contents:
ON (Initial setting) / OFF
Setting the Treble Control ON:
The subwoofer signal is output from the Subwoofer RCA
Connectors (refer to “Connections” on page 42).
1 After selecting TREBLE from the 3BAND EQ adjustment OFF:
mode, turn the Rotary encoder to select the desired No subwoofer signal is output from the Subwoofer RCA
Treble setting item, and then press ENTER. Connectors (refer to “Connections” on page 42).
WIDTH (Q)  CENTER FRQ  LEVEL
Adjusting the Low Pass Filter
2 Turn the Rotary encoder to select the desired setting
value, and then press ENTER. The Low Pass Filter on this unit can be adjusted to suit your personal
taste.
3 Press  to return to the previous step.
 Setting item: SUBW LPF
 Setting the Treble Bandwidth (WIDTH (Q)) Setting contents:
OFF (Initial setting) / LPF 60 (Hz) / LPF 80 (Hz) / LPF 120 (Hz) /
Turn the Rotary encoder to select the desired treble LPF 160 (Hz)
bandwidth. All frequencies lower than the selected cutoff are output.
WIDE 0.75  NARROW 1.25

 Setting the Treble Center Frequency (CENTER FRQ)

Setting the Subwoofer Phase
The subwoofer output phase is toggled SUBWOOFER NORMAL (0°) or
Turn the Rotary encoder to select the desired treble SUBWOOFER REVERSE (180°). To adjust the level, turn the Rotary
center frequency. encoder.
7.5K (Hz)  10.0K (Hz) (Initial setting)  12.5K (Hz)  15.0K (Hz)
 Setting item: SUBW PHASE
 Setting the Treble Level Setting contents:
NORMAL (Initial setting) / REVERSE
Turn the Rotary encoder to select the desired treble level
(-7~+7)*.
Setting the Subwoofer System
You can emphasize or weaken the treble level.
* The adjustment can also be made by pressing AUDIO. Refer to When the subwoofer is on, you can select either SYS 1 or SYS 2 for the
“Adjusting Subwoofer Level/Bass Level/Mid Level/Treble Level/ desired subwoofer effect.
Balance (Between Left and Right)/Fader (Between Front and
Rear)/Loudness/Defeat” on page 14.  Setting item: SUBW SYS
Setting contents:
Adjusting the High Pass Filter SUBW SYS 1 (Initial setting) / SUBW SYS 2
The High Pass Filter on this unit can be adjusted to suit your personal SUBW SYS 1:
Subwoofer level changes according to the main volume setting.
taste.
SUBW SYS 2:
 Setting item: HPF Subwoofer level change is different from the main volume setting.
For example, even at low volume settings, the subwoofer is still
Setting contents: audible.
OFF (Initial setting) / 60 (Hz) / 80 (Hz) / 120 (Hz) / 160 (Hz)
All frequencies above the selected cutoff are output.

16-EN
 About the indication display
Other Functions When displaying Text, the following indicators are lit according to the
mode.

SOURCE/ MP3/WMA/
Indica- iPod/ Satellite
AAC/USB
tor/ CD Mode iPhone Radio
AUDIO
Mode Mode mode
Mode
Folder
Name*2
 — — —
being dis-
played
Artist Artist Artist
Name*1 Name*1 Name*1
 —
 VIEW being dis- being dis- being dis-
BAND/ F/R played played played
Text (Disc Album Album Content
* The illustration is for CDE-123. Name*3) Name*1 Name*1 info.*4

being dis- being dis- being dis- being dis-
played played played played
Displaying the Text Song
Text (Track Song
Name*1 / Song Title
Name*3) Name*1
Text information, such as the disc name and the track name, will be  File Name being dis-
being dis- being dis-
displayed if playing a CD text compatible disc. It is also possible to being dis- played
played played
display the folder name, the file name and the tag, etc., while playing played
MP3/WMA/AAC files. Category
name
Press VIEW.  — — —
being dis-
The display will change every time the button is pressed. played
Note *1 Tag information:
• When the TEXT SCR is set to SCR MANUAL, press and hold  for at If there is no tag information, “ARTIST”/“ALBUM”/“SONG” is
least 2 seconds, the current text will be scrolled one time (except Radio
mode).
displayed.
*2 The root folder is displayed as “\ROOT”.
The display in Radio mode: *3 If there is no Text (Disc Name or Track Name), “DISC TEXT”/
FREQUENCY  CLOCK  FREQUENCY “TRACK TEXT” is displayed.
The display in CD mode: *4 If there is no text information, nothing will be displayed.
TRACK NO./ELAPSED TIME  TRACK NO./CLOCK  TEXT (DISC
NAME)*1  TEXT (TRACK NAME)*1  TRACK NO./ELAPSED TIME About “Text”
The display in MP3/WMA/AAC mode:
Text compatible CDs contain text information such as the disc name and
FILE NO./ELAPSED TIME  (FOLDER NO./FILE NO.)*2  FILE NO./
track name. Such text information is referred to as “text”.
CLOCK  FOLDER NAME  FILE NAME  ARTIST NAME*3 
ALBUM NAME*3  SONG NAME*3  FILE NO./ELAPSED TIME Notes
*1 Displayed during playback of a disc with CD text. • Some characters may not be displayed correctly with this device,
*2 Only for MP3/WMA/AAC disc mode. depending on the character type.
*3 ID3 tag/WMA tag • “NO SUPPORT” is displayed when the desired text information cannot
If an MP3/WMA/AAC file contains ID3 tag/WMA tag be displayed on this unit.
information, the ID3 tag/WMA tag information is displayed • The text or tag information may not be correctly displayed, depending
(e.g., song name, artist name, and album name). All other on the contents.
tag data is ignored.

Using the Front AUX Input Terminal

Connect a portable music player, etc. by simply connecting it to the
input on the front panel. An optional adapter cable is required (standard
RCA to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).

17-EN
 Press SOURCE, and select the AUXILIARY mode to
listen to the portable device.
SETUP
Portable player, etc. Main unit

Rotary encoder/ /ENTER

AUDIO/SETUP
FAV 

or

 
Optional adapter cable (RCA pin
plugs [red, white] 3.5ø miniplugs) * The illustration is for CDE-123.
or (3.5ø miniplugs).

Notes Setting
• This function is available only when AUX SETUP is set to ON. For
details, refer to “Setting the AUX SETUP Mode” on page 20.
You can customize the unit to suit your own preferences and usage.
• For CDE-123, during AUX source, you can switch to AUX REAR source
From the SETUP menu, GENERAL Setting, DISPLAY Setting, etc., can
by pressing BAND/F/R. For details on AUX REAR, refer to “Setting the
be modified.
AUX REAR Setup Mode (AUX-R SET) (CDE-123 only)” on page 19.
• If a Flash Memory Device is directly connected to the front USB
Use steps 1 to 5 to select one of the SETUP modes to modify.
terminal, the size or shape may interfere with driving operations,
See the applicable section below for details about the
therefore, avoid connecting an AUX input terminal and a Flash
Memory Device at the same time. selected SETUP item.

1 Press and hold AUDIOSETUP for at least 2 seconds to

Set your favorite source to the FAV button activate the SETUP mode.

(FAV SETUP) 2 Turn the Rotary encoder to select the desired item, and
then press ENTER.
You can set a favorite source to the FAV button by following steps. Once BLUETOOTH*1  GENERAL  AUDIO*2  DISPLAY  SXM
this is set, you can switch to favorite source directly by pressing FAV. SETUP*3  iPod & USB
(e.g. Select GENERAL)
Set your favorite source BLUETOOTH:
BT IN

1 Press and hold FAV for at least 2 seconds to activate FAV

GENERAL:
CLOCK ADJ*4  FAV SETUP*5  PLAY MODE  INT MUTE*6 
setup mode.
AUX-R SET*9  AUX-R NAME*7  AUX SETUP  AUX NAME*8
 AUX GAIN*8  AUX-R GAIN*7  POWER IC  DEMO
2 Turn the Rotary encoder to select a favorite source, and
DISPLAY:
then press ENTER.
DIMMER  SCROLLTYPE  TEXT SCR
The favorite source is set.
SXM SETUP: (SiriusXM Mode)
Notes ALERTSETUP  GAME ALERT  P-LOCK  SIGNAL IND
• If you do not want to use this function, select “OFF”. iPod & USB:
• If no operation is performed for 10 seconds, the unit automatically USB SEARCH  USB SKIP  PANDORA  PANDORA VL*10
returns to normal mode.
*1 Displayed only when INT MUTE is set to OFF, and the mode is
set to other than BT AUDIO. (CDE-123 only)
Recall your favorite source *2 Refer to “Sound Setting” on page 15.
*3 Displayed only when a SiriusXM Tuner is connected and the
Once a source is set to FAV button, press FAV to recall the current source is Satellite Radio (SIRIUSXM). (CDE-124SXM/
source directly. CDE-123 only)
*4 Refer to “Setting the Time” on page 10.
Note *5 You can also set this in “Set your favorite source to the FAV
• Depending on the setting, even though you set a source to FAV, it may button (FAV SETUP)” (refer to “Set your favorite source to the
not be available. For example, when you set AUX as your favorite FAV button (FAV SETUP)” on page 18).
source and OFF is set in “Setting the AUX SETUP Mode” (refer to *6 For CDE-123, displayed only when BT IN is OFF.
“Setting the AUX SETUP Mode” on page 20), the AUX source will not *7 Displayed only when AUX-R SET is set to ON. (CDE-123 only)
be recalled by pressing FAV. *8 Displayed only when AUX SETUP is set to ON.
*9 CDE-123 only
*10 Displayed only when PANDORA is set to ON.

18-EN
3 Turn the Rotary encoder to select a setting item, and then Notes
press ENTER. • Depending on the setting, some item may not be selectable.
(e.g. Select POWER IC) • If you do not want to use this function, select “FAV OFF”.
• This setting can also be activated by pressing and holding FAV for at
4 Turn the Rotary encoder to change the setting, and then least 2 seconds.
press ENTER.
(e.g. Select POWER IC ON or POWER IC OFF.)
Playing MP3/WMA/AAC Data (PLAY MODE)
This unit can play back CDs containing both CD and MP3/WMA/AAC
5 Press and hold AUDIOSETUP for at least 2 seconds to data (created in Enhanced CD (CD Extra) format). However, in some
return to normal mode. situations, playback of an enhanced CD may be difficult. In this case,
Notes you can select playback of a single session only, containing the CD data.
• Press  to return to the previous mode. When a disc contains both CD and MP3/WMA/AAC data, playback
• If no operation is performed for 60 seconds, the unit will return to starts from the CD data portion of the disc.
normal mode automatically.
 Setting item: PLAY MODE
BLUETOOTH Setting (CDE-123 only) Setting contents:
CD-DA (Initial setting) / CDDA/MP3
Select BLUETOOTH from the setup main menu in step 2 above.
CD-DA:
Only the CD data in Session 1 can be played back.
Setting the BLUETOOTH Connection
CDDA/MP3:
If an optional BLUETOOTH INTERFACE is connected, you can place a CD data, MP3/WMA/AAC files in mixed mode, and multi-session
hands-free call by a BLUETOOTH-equipped mobile phone. Make this discs can be played back.
setting when the BLUETOOTH INTERFACE is connected and the Note
BLUETOOTH function is used. For details, refer to the Owner’s Manual • Perform this setting before inserting a disc. If a disc has already been
of the optional BLUETOOTH INTERFACE. inserted, remove it first.

 Setting item: BT IN Turning Mute Mode On/Off (INT MUTE)

Setting contents:
If a device having the interrupt feature is connected, audio will be
OFF (Initial setting) / HFP / HFP+AUDIO
automatically muted whenever the interrupt signal is received from the
OFF: device.
This option does not allow this unit to recognize connection with
BLUETOOTH INTERFACE.
 Setting item: INT MUTE
HFP:
Set this item when BLUETOOTH INTERFACE (KCE-250BT) is Setting contents:
connected. (Hands-free Phone is available, but the BT Audio OFF AUX (Initial setting) / OFF AUX-R (CDE-123 only) / ON
source is not displayed.)
OFF AUX:
HFP+AUDIO: When the interrupt signal is received from device, the AUX source
Set this item when BLUETOOTH INTERFACE (KCE-400BT) is volume will be output from the unit.
connected. (Hands-free Phone is available, and BT Audio source is
also available.) OFF AUX-R (CDE-123 only):
When the interrupt signal is received from device, the AUX REAR
Notes source volume will be output from the unit.
• After the above setting, turn the ignition key off (ACC OFF) and on ON:
again (ACC ON). When the interrupt signal is received from device, no sound will
• The w button can be used only when the optional BLUETOOTH be output.
INTERFACE is connected.
• If the mobile phone compatible with the Voice Dial function is Setting the AUX REAR Setup Mode (AUX-R SET)
connected, the Voice Dial function can be used. (CDE-123 only)
• When INT MUTE is set to ON, the BLUETOOTH setting cannot be
made. When the BLUETOOTH INTERFACE is connected, set INT You can input the audio of an external device, (such as a Portable audio
MUTE to OFF. Refer to “Turning Mute Mode On/Off (INT MUTE)” player) to the BLUETOOTH interface connector of this unit. A special
on page 19. Conversion cable (KCE-237B) is necessary to adapt the BLUETOOTH
interface connector as an AUX IN.
General Setting A portable music device and a BLUETOOTH INTERFACE cannot be
connected to the BLUETOOTH interface connector at the same time.
GENERAL is selected on the setup main menu in step 2.
 Setting item: AUX-R SET
Set your favorite source to the FAV button (FAV Setting contents:
SETUP) ON / OFF (Initial setting)
You can select one source as your favorite source. Once this is set, you ON*:
can switch to favorite source directly by pressing FAV. Set to ON when a portable device is connected. If SOURCE is
pressed and AUX REAR is selected, the sound of the portable
PANDORA F*1  PANDORA*2  PANDORA R*1  FM1  FM2  AM device is input to the unit.
 AUX  AUX REAR*1  DISC  BT AUDIO*1  SIRIUSXM*3  USB*2
* You can change the AUX-R NAME display when AUX-R SET is
 USB FRONT*1  USB REAR*1  FAV OFF
set to ON. Press ENTER when AUX-R SET is set to ON,
*1 CDE-123 only. and select AUX-R NAME by turning the Rotary encoder,
*2 CDE-124SXM/CDE-122 only. then press ENTER. After that, turn the Rotary encoder
*3 CDE-124SXM/CDE-123 only to select the desired AUX-R NAME.

19-EN
 Note ON:
• When the PORTABLE is set, PMD is displayed on the unit.
OFF: Speakers
When set to OFF, AUX REAR source cannot be selected. SPEAKER
RIGHT FRONT Front
Setting the AUX SETUP Mode right

You can input the audio of an external device, (such as a Portable audio
player) to the AUX connector of this unit. SPEAKER
RIGHT REAR Rear
 Setting item: AUX SETUP right
Setting contents:
ON (Initial setting) / OFF
SPEAKER
ON*: LEFT REAR Rear
Set to ON when a portable device is connected. If SOURCE is left
pressed and AUX is selected, the sound of the portable device is
input to the unit.
* You can change the AUX NAME display when AUX SETUP is
SPEAKER
set to ON. Press ENTER when AUX SETUP is set to ON,
LEFT FRONT Front
and select AUX NAME by turning the Rotary encoder, then
left
press ENTER. After that, turn the Rotary encoder to
select the desired AUX NAME.
OFF:
Note
• When the PORTABLE is set, PMD is displayed on the unit. CDE-123:
OFF:
When set to OFF, AUX source cannot be selected. Front
left
Amplifier
Setting the AUX Level (AUX GAIN) Front
right
After setting to ON in “Setting the AUX SETUP Mode”, this setting can
Rear
be carried out. left
Amplifier
 Setting item: AUX GAIN Rear
right
Setting contents:
LOW (Initial setting) / HIGH
CDE-124SXM/CDE-122:
LOW:
Decreases the external input audio level. Front
HIGH: left
Increases the external input audio level. Amplifier
Front
right
Setting the AUX REAR Level (AUX-R GAIN)
(CDE-123 only) Note
• No sound is produced by the system when the power output is set to
After setting to ON in “Setting the AUX REAR Setup Mode”, this setting
OFF.
can be carried out.

 Setting item: AUX-R GAIN Demonstration

Setting contents: This unit has a demonstration feature for the display.
LOW / HIGH (Initial setting)
 Setting item: DEMO
LOW:
Decreases the external input audio level. Setting contents:
HIGH: DEMO ON / DEMO OFF (Initial setting)
Increases the external input audio level.
Note
• To quit Demo mode, set to DEMO OFF.
Connecting to an External Amplifier (POWER IC)
When an external amplifier is connected, sound quality can be
improved by stopping the power supply of the built-in amplifier.

 Setting item: POWER IC

Setting contents:
ON (Initial setting) / OFF
ON:
The speakers are driven by the built-in amplifier.
OFF:
Use this mode when the line output of this unit is used to drive an
external amplifier. In this setting, the head unit’s internal amplifier
is turned OFF and cannot drive speakers.

20-EN
 Display Setting SiriusXM (SXM) Satellite Radio Setting
DISPLAY is selected on the setup main menu in step 2.
(CDE-124SXM/CDE-123 only) (Only when
a SiriusXM Tuner is connected and the
Dimmer Control current source is Satellite Radio
Set the Dimmer control to AUTO to decrease the illumination (SIRIUSXM))
brightness of the unit with the head lights of the vehicle ON. This mode
is useful if you feel the unit’s backlighting is too bright at night. SXM SETUP is selected on the setup main menu in step 2.

 Setting item: DIMMER Managing Artist and Song Alerts

Setting contents: The following operations can be performed to change the Alert settings.
DIM AUTO (Initial setting) / DIM MANUAL The Artist and Song Alerts feature allows you to mark Artists and Songs
from the current channel and then the unit alerts you later when the
Scroll Type Setting marked Artists or Songs are playing on other channels.

Choose from two scrolling methods.  Setting item: ALERTSETUP

Select the type you prefer.
Setting contents:
 Setting item: SCROLLTYPE ALERT LIST / ALERT / DELETE ALL
Setting contents: ALERT LIST
This menu option allows you to enable the Artist/Song alert for
SCR TYPE1 / SCR TYPE2 (Initial setting) individual Artist/Songs (ALERT ON or OFF) or to delete individual
SCR TYPE1: stored Artist/Song alerts (DELETE).
The characters scroll from right to left, a single character at a time. 1 Turn the Rotary encoder to select ALERT LIST and then press
SCR TYPE2: ENTER.
Words are built up from left to right, a single character at a time. 2 Turn the Rotary encoder to select a stored Artist or Song and
When the display is filled, it is cleared and the remaining words are then press ENTER.
displayed the same way until all words of the title have been 3 Turn the Rotary encoder to ALERT to enable (ALERT ON) or
shown. disable (ALERT OFF) the alert for the selected Artist/Song or
turn the Rotary encoder to select DELETE to delete the
Scroll Setting (TEXT SCR) selected Artist/Song from memory.
ALERT
This CD player can scroll the disc and track names recorded on This menu option allows you to temporarily disable the Artist/
CD-TEXT discs, as well as the text information of MP3/WMA/AAC Song Alerts for all Artists/Songs. When the Alerts are re-enabled,
files, folder names, tags and SiriusXM (SXM) Satellite Radio. individual Artist/Song Alert disabled in the ALERT LIST menu
setting remain disabled.
 Setting item: TEXT SCR Turn the Rotary encoder to select ALERT ON or OFF, and
Setting contents: then press ENTER.
If ON is set, the alert for all stored Artists/Songs is enabled.
SCR AUTO / SCR MANUAL (Initial setting) If OFF is set, the alerts for all stored Artists/Songs are disabled.
SCR AUTO: DELETE ALL
The current text information of CD, folder, tag, etc. is scrolled This operation will delete all alerts (artists, songs and team) stored
automatically. in memory.
SCR MANUAL: After selecting this item,
The display is scrolled when a disc is loaded or when a track is Turn the Rotary encoder to select DELETE YES, and then
changed, etc. press ENTER.
Note
• The unit scrolls CD text names, folder names, file names or tag display. Setting the Favorite Sports Team Alerts
This menu option allows you to select your favorite teams, organized by
leagues, so that you will be alerted later when your favorite teams are
playing on other channels.

 Setting item: GAME ALERT

Setting content:
LEAGUE LIST
LEAGUE LIST
After selecting GAME ALERT, a sports league list will be displayed.
1 Turn the Rotary encoder to select the desired league, and
then press ENTER.
2 Turn the Rotary encoder to select a team you want to store,
and then press ENTER.
A “TEAM SAVED” pop-up screen is followed by an “X U(sed)/Y
E(mpty)”.
X is the total number of Artist/Song/Game alert items stored in
memory, and Y is the total number of memory slots still
available for storage.
Note
• Select “NONE” on the team list if you do not want to store in
memory.

21-EN
Setting the Parental Control
iPod/iPhone and USB Setting
You can lock out channels with passcode protection. Channels that are
locked cannot be accessed without entering the passcode. You can “iPod & USB” is selected on the setup main menu in step 2.
unlock a channel or change the passcode using this menu option.
Setting the USB Search Mode
 Setting item: P-LOCK
The unit allows you to search for the USB Audio files by Tag information
Setting contents:
or Explorer (FILE NAME) mode.
CLEAR ALL / LOCKED CH / EDIT CODE
 Setting item: USB SEARCH
How to input passcode?
Setting contents:
1 After select P-LOCK, a passcode input screen will be TAG (Initial setting) / FILE NAME
displayed. TAG:
When TAG is selected, you can use Playlists/Artists/Albums/Songs/
2 Input the passcode using the Rotary encoder. Genres/Composers/Folders/Files search mode to narrow searches.
The initial default 4-digit passcode is set to 0000. FILE NAME:
The passcode is entered one digit at a time with the Rotary When FILE NAME is selected, you can search a folder/file as search
encoder. files on PC.
For example, by turning to clockwise 2 steps, the number 1 is Notes
selected. • After the above setting, turn the ignition key off (ACC OFF) and on
After entering the digit, it is displayed as “*” (asterisk). again (ACC ON).
• For search mode details, refer to “Searching for a desired Song” on
3 Press  and then input the next digit of the passcode as page 24.
described in step 2.
Setting the USB Skip function
4 Repeat steps 2 to 3 until the 4 digits of the passcode are
entered and then press ENTER. During Explorer (FILE NAME) searching, you can skip over designated
folders/files by pressing . For example, if you select 10FILE in the
After the correct passcode is entered, the LOCKED CH/CLEAR
Explorer (FILE NAME) searching mode, by pressing  you can skip
ALL/EDIT CODE items can be adjusted.
forward 10 folders/files from the current folder/file; by pressing  you
LOCKED CH: can skip backward 10 folders/files from the current folder/file. If the
After selecting this item, turn the Rotary encoder to select a
folders/files searched are less than the assigned skipped-over ones,
channel from channel list, press ENTER to select to lock or
unlock the channel. Locked channels cannot be tuned without pressing  will skip to the first or last folder/file.
entering the passcode.
The locked channel will be displayed with “L” before channel No.  Setting item: USB SKIP
CLEAR ALL: Setting contents:
Unlock all locked channels. 10FILE (Initial setting) / 20FILE / 50FILE / 100FILE
Turn the Rotary encoder to select CLEAR YES, and then press
ENTER.
Setting the Pandora Source
EDIT CODE:
Change the passcode. You can select to turn on or off the Pandora source.
1 Input the old passcode as steps 1 to 4 in “How to input
passcode?”.  Setting item: PANDORA
After the old passcode is entered, the new passcode input
Setting contents:
screen will be displayed.
ON (Initial setting) / OFF
2 Input the new passcode as steps 1 to 4 in “How to input
passcode?”. ON:
A confirm screen (CNFIRM) will be displayed and the new The Pandora source can be switched by pressing SOURCE.
passcode must be entered again for confirmation. OFF:
When the passcode is changed successfully, the unit will The Pandora source is not available.
display CODE SAVED.
Note
• Keep a note of the numbers somewhere safe in case you should Setting the Pandora Volume
forget it.
When PANDORA is ON, you can adjust the Pandora source volume
memory.
Confirming the strength of the SiriusXM signal Use this function to match the Pandora source volume to the other
You can check the signal strength through this setting item. sources, as closely as possible.

 Setting item: SIGNAL IND  Setting item: PANDORA VL

Setting content: Setting contents:
SIGNAL IND 0~ 9dB (The initial value is 0 dB)
SIGNAL IND:
This menu item displays the SiriusXM signal strength as STRONG,
GOOD, WEAK or NO SIGNAL.

22-EN
 Remove Flash Memory from Front USB
Flash Memory/Portable Connection Terminal

audio player (optional) 1 Carefully, pull out the Flash Memory from the USB cable or
the USB Connection Terminal.

SOURCE/ Rotary encoder/ /ENTER

2 Close the cover of the USB Connection Terminal.
Notes
  
• Change to a source other than the Flash Memory mode, then remove
the Flash Memory. If the Flash Memory is removed in the Flash
Memory mode, data may be damaged.
• When removing Flash Memory, pull it out straight.
• If sound is not output or Flash Memory is not recognized even when
Flash Memory is connected, remove Flash Memory once, and then
connection it again.
• Route the USB cable away from another cables, etc.
• After removing the Flash Memory, close the cover of the USB
 VIEW Preset buttons Connection Terminal to prevent dust or foreign objects from entering
BAND/ F/R (1 through 6) and causing a malfunction.
• On how to connect an Flash Memory to Rear USB Connector, refer to
* The illustration is for CDE-123. “Rear Flash Memory Connection (CDE-123 only) (sold separately)” on
page 41.

Connecting the Flash Memory (optional)

Using the Flash Memory/Portable audio
If a Flash Memory device/Portable audio player is connected to the unit,
MP3/WMA/AAC files can be played back.
player Banking Function
Note Note
• When TAG is set in “Setting the USB Search Mode” (refer to “Setting the • When a Flash Memory is connected, the following description is
USB Search Mode” on page 22), in the USB mode, when this unit is available only when TAG is set in “Setting the USB Search Mode” (refer
reset, ACC is switched from OFF to ON, or when the USB is connected to “Setting the USB Search Mode” on page 22).
to this unit, “BANKING” is displayed for several seconds.
What is a Bank?
There are two USB connectors on CDE-123, you can choose to connect A bank is a unit of up to 1,000 songs, which is stored in memory.
an Flash Memory to Front USB Connection Terminal or Rear USB “BANKING” refers to the grouping of songs available in Flash Memory, in
Connector. There is only one USB connector (Front USB Terminal) on banks of 1,000 songs each. However, when a Flash Memory is
CDE-124SXM/CDE-122. connected, 1BANK can store up to 1,000 songs under the following
conditions. Otherwise, the number of songs that can be stored may be
When connect Flash Memory to Front USB less than 1,000.
Conditions (general estimate values)
Connection Terminal
Playlists: 20 (32 characters; 64 bytes)
1 Open the cover of the USB Connection Terminal. Genres: 10 (32 characters; 64 bytes)
Composers: 30 (32 characters; 64 bytes)
Artists: 30 (32 characters; 64 bytes)
2 Connect the Flash Memory directly to the USB Connection Albums: 100 (32 characters; 64 bytes)
Terminal, or via the USB cable. Titles: 1,000 (32 characters; 64 bytes)
Folders: 100 (32 characters; 64 bytes)
Files: 1,000 (32 characters; 64 bytes)
This unit USB Connection Terminal File Paths: 1,000 (128 characters; 256 bytes)
Flash Memory
(sold separately) About Banking
While a bank is being built up, “BANKING” is displayed. Banking occurs
whenever a Flash Memory device/Portable audio player is connected or
or after power to the head unit turns on.
It can take anywhere from a few seconds to up to several minutes for
banking to complete. This depends on the number of files and folders
in Flash Memory/Portable audio player.

Available operations while Banking

• During Banking, the information display changes so the VIEW
Flash Memory Cable (sold
operation is not available.
(sold separately) separately) • With a song playing, Regular fast-forwarding and next song selection is
available.
• While Banking, the song playback order may differ from the song order
in the Flash Memory device/Portable audio player.
• Searching is not recommended during the Banking process as the
database is under construction at this time, and malfunction may result
in some cases.

23-EN
This unit has a BANK function that automatically divides every 1,000
songs stored in Flash Memory/Portable audio player into individual Searching for a desired Song
banks to make searching and playing back a song easier. A maximum of
1,000 songs for one bank can be stored according to the order stored in
You can select to search a song by Tag information or Explorer (FILE
Flash Memory/Portable audio player. A maximum of 20 banks (20,000
NAME) mode. Before you search a song, select your desired search
songs) can be recognized.
mode in “Setting the USB Search Mode” (refer to “Setting the USB
Bank No. Song number Search Mode” on page 22).
Bank1 1~1,000
Searching by Tag information
Bank2 1,001~2,000
  Before performing the following procedures, make sure TAG is selected
in “Setting the USB Search Mode” (refer to “Setting the USB Search
Bank20 19,001~20,000
Mode” on page 22).
A Flash Memory Device or Portable audio player can contain hundreds
of songs. By using file tag information and keeping these songs
Playback organized in playlists, this unit’s search functions will ease song searches.
Each music category has its own individual hierarchy. Use the Bank*1/
Playlists*2/Artists/Albums/Songs/Genres/Composers/Folders/Files
The following table shows which file can be played on which models.
search mode to narrow searches based on the table below.
MP3 WMA AAC
Hierarchy Hierarchy Hierarchy Hierarchy Hierarchy
CDE-124SXM/ 1 2 3 4 5

CDE-122 Bank*1 Playlist*2 Song — —
CDE-123    Bank*1 Artist* Album* Song —
Bank*1 Album* Song — —
1 Press SOURCE to select the USB mode.
Bank*1 Song — — —
For CDE-123, depending on which USB Connector you used,
press BAND/F/R to switch USB source between FRONT and Bank*1 Genre* Artist* Album* Song
REAR. Bank*1 Composer* Album* Song —
Bank*1 Folder File — —
2 Press  or  to select the desired track (file).
Bank*1 File — — —
Pressing and holding  or  will fast backward/fast
forward track continuously. *1 A maximum of 1,000 songs for one bank can be stored according to
Note the order stored in Flash Memory/Portable audio player. However,
• Depending on the connected portable audio player, fast-forwarding/ song stored order in bank may differ from the song order in the Flash
fast-reversing may not be available. Memory device/Portable audio player in some case.
*2 Playlist search is not available when a Portable audio player is
3 To pause playback, press . connected.
Pressing  again will resume playback. For example:
Searching by Artist name
Notes
The following example explains how an Artists search is performed.
• WMA format files that are protected by DRM (Digital Rights Another search mode can be used for the same operation, although the
Management), AAC format files that have been purchased from the hierarchy differs.
iTunes Store and files that are copy-protected (copyright protection)
cannot be played back on this unit.
• The playback time may not be correctly displayed when a VBR Searching by artist name
(Variable Bit Rate) recorded file is played back.
• If there is tag information, artist name/album name/track name is 1 Press ENTER to activate the search selection mode.
displayed.
• If an MP3/WMA/AAC file contains ID3 tag/WMA tag information, 2 Turn the Rotary encoder to select a desired Bank, and
the ID3 tag/WMA tag information is displayed (e.g., song name, artist then press ENTER.
name, and album name). All other tag data is ignored.
“BANKING” may be displayed for a few seconds.
• “NO SUPPORT” is displayed when text information is not compatible
with this unit.
• Before disconnecting Flash Memory, be sure to change to another source
3 Turn the Rotary encoder to select the Artist search mode,
or set to pause. and then press ENTER.
• Press VIEW to switch the display. For details, refer to “Displaying the PLAYLIST  ARTIST  ALBUM  SONG  GENRE  COMPOSER
Text” on page 17.  FOLDER  FILE  PLAYLIST

4 Turn the Rotary encoder to select the desired Artist, and

then press ENTER.

5 Turn the Rotary encoder to select an album, and then

press ENTER.

6 Turn the Rotary encoder to select a song and press

ENTER.
The selected song is played back.

24-EN
 Searching by Explorer (FILE NAME) mode Repeat Play
(Flash Memory only)
Before performing the following procedures, make sure FILE NAME is 1 Press a 4.
selected in “Setting the USB Search Mode” (refer to “Setting the USB The song is played back repeatedly.
Search Mode” on page 22). When a song is searched by Tag information
Flash Memory can contain hundreds of songs. By organizing songs by
a*1  a*2  a*3  (off )  a
folder, you can quickly find a desired folder/file. This operation is
When a folder/file is searched by Explorer (FILE NAME) mode (Flash
similar to search a folder/file from PC.
Memory only)
a*1  a*4  (off )  a
1 Press ENTER to activate the search mode.
*1 Only a file is repeatedly played back.
2 Turn the Rotary encoder to select a desired folder/file. *2 According to the artist information of the current song, a playlist
about all the songs with the same artist of the Bank are made
When a folder is searched, indicator lights up.
into a playlist, which then starts to play back.
When a file is searched, indicator lights up.
*3 According to the album information of the current song, a
playlist about all the songs with the same album of the Bank are
3 Press ENTER to play the selected file or enter the made into a playlist, which then starts to play back.
selected folder. *4 Only files in a folder are repeatedly played back.
Press and hold ENTER for at least 2 seconds to play back all
songs in the selected folder. 2 To cancel repeat play, select (off) with the above
procedure.
4 Repeat steps 2 to 3 until the desired folder/file is found
Note
when a folder is entered in step 3.
• During repeat play, setting M.I.X. to ON will cancel the repeat play.
Notes
• When a portable audio player is connected, even though FILE NAME is
set in “Setting the USB Search Mode” (refer to “Setting the USB Search M.I.X. (Random Play)
Mode” on page 22), the Tag information search mode will be applied.
• In the Tag search mode, after pressing and holding ENTER for at
least 2 seconds while in each hierarchy (except Song and File hierarchy), 1 Press 5 s.
all songs of the selected hierarchy are played back. The songs are played back in random sequence.
• After selecting [ALL] in the Tag search mode with “*”, press and hold
When a song is searched by Tag information
ENTER for at least 2 seconds to play back all songs in the selected
search mode. s*1  s ALL*2  (off )  s
• Even if the songs belong to the same playlist, they may be saved as When a folder/file is searched by Explorer (FILE NAME) mode (Flash
different BANK. Memory only)
• While in the search mode, if you press and hold  for at least s*3  s ALL*4  (off )  s
2 seconds, or no operation is performed for 60 seconds, the search mode *1 Song shuffle randomly plays back songs within a selected
is canceled. category (playlist, album, etc.). The songs within the category
• The root folder of Flash Memory/Portable audio player is displayed as are played just once until all songs have been played.
“\ROOT”. *2 All songs in the current Bank are played back in random
• When the bank is changed during Repeat play, the Repeat play will be sequence. Any one song does not play back again until all songs
canceled. have been played back.
• In the search mode, pressing  will return to the previous mode. *3 All songs in the current folder are played back in random
• When search is made during M.I.X. play, the M.I.X. play mode will be sequence. Any one song does not play back again until all songs
canceled. have been played back.
• If any one of the preset buttons (1 through 6) is pressed in the *4 All songs in the Flash Memory are played back in random
search mode, a search can be made quickly by skipping to the specified sequence. Any one song does not play back again until all songs
location. For details, refer to “Direct Search Function” on page 28. have been played back.
• In the Tag search mode, a search can be made quickly by Alphabet skip
function to find the desired artist or song, etc. For details, refer to
“Alphabet Skip Function (Tag search mode only)” on page 26.
2 To cancel M.I.X. play, select (off) with the above procedure.
• In the Explorer (FILE NAME) search mode, a search can be made Notes
quickly by USB Skip function to find the desired folder/file. For details, • When a song is played back during Random (M.I.X.) play in the USB
refer to “Setting the USB Skip function” on page 22. mode, the song can be played back again randomly even if not all songs
• When searching for a song, artist, etc., in Flash Memory, the display in the current Bank or Flash Memory have been played back.
order may be incorrect if the character code of the file tag information is • During M.I.X. play, setting repeat play to ON will cancel the M.I.X.
mixed. play.
• During repeat play, etc., the track number display for M.I.X. play may
be incorrect.

25-EN
Select Playlist/Artist/Album/Genre/
Composer/Folder
iPod/iPhone (optional)
Playlist*/Artist/Album/Genre/Composer/Folder can be easily changed. SOURCE/ Rotary encoder/ /ENTER
For example, if you listen to a song from a selected album, the album can
be changed.   

Press  or  to select the desired Playlist*/Artist/Album/

Genre/Composer/Folder.
* This item is invalid when a portable audio player is connected.
Notes
• If the song search mode was used to select a song, this function is
inactive.
• If an album is selected during an artist search, other albums by that  VIEW Preset buttons 6
BAND/ F/R (1 through 6)
artist are searchable.
• For Flash Memory, this function is inactive during M.I.X. ALL/M.I.X.
Song playback. * The illustration is for CDE-123.
• For Portable audio player, this function is inactive during M.I.X.
playback.
• This function is inactive during RPT ALBUM/RPT ARTIST playback. Connecting an iPod/iPhone
An iPod/iPhone can be connected to this unit by using the Interface
Alphabet Skip Function (Tag search mode cable for iPod (CDE-124SXM/CDE-122, sold separately; CDE-123,
only) supplied). When an iPod/iPhone is connected to this unit, you can
choose to control the iPod/iPhone using its own controls or by the head
unit controls. For details, refer to “Setting the iPod Control” on page 27.
The initial skip function is skipped to the next number, symbol or letter The Owner’s Manual only introduces on how to control an iPod/iPhone
such as from A to B, B to C. via this unit. So before the following operation, make sure to set HEAD
You can skip in reverse order such as B to A by pressing . UNIT in “Setting the iPod Control” (refer to “Setting the iPod Control”
on page 27). On how to control an iPod/iPhone on itself, refer to
During Tag search mode, press  or  to perform the Owner’s Manual of iPod/iPhone.
Alphabet Skip Function.
A list is skipped to the next number, symbol or letter. Notes
• Internet and telephone functions of the iPod touch or iPhone, etc., can
Notes also be used while connected to this unit. Using these functions will stop
• Characters defined for skipping are from the UTF-16 standard common or pause the currently playing songs. During this time, do not operate
in many computer systems. the unit to avoid a malfunction.
• If the Song search mode is activated in Playlist search, this function is • If you connect an iPhone to CDE-123, it can be used as an iPod. If you
invalid. use iPhone as a hands-free phone, you need the optional BLUETOOTH
INTERFACE.
• There are two USB connectors on CDE-123, you can choose to connect
Quick Search an iPod/iPhone to Front USB Connection Terminal or Rear USB
Connector. On how to connect an iPod/iPhone to this unit, refer to
“iPod/iPhone Connection (sold separately)” on page 41.
You can search for a song from all songs in current bank of Flash • Do not leave an iPod/iPhone in a car, as its mechanism is sensitive to
Memory/Portable audio player without selecting an album, artist, etc. high temperature and humidity conditions, and damage may result.

1 Press and hold ENTER for at least 2 seconds to activate

About iPod/iPhone models usable with this unit
• Confirmed devices regarding Made for iPod. Correct function of
Quick Search mode.
earlier versions cannot be guaranteed.
2 Turn the Rotary encoder to select a desired track (file).
iPod touch (4th generation): Ver.4.2.1
iPod nano (6th generation): Ver.1.0
The selected track is played back immediately. iPod touch (3rd generation): Ver.4.2.1
Note iPod nano (5th generation): Ver.1.0.2 PC
• Press  in the search mode to cancel. Or, the search mode is canceled iPod classic (160GB) (Late 2009): Ver.2.0.4
if no operation is performed for 10 seconds. iPod touch (2nd generation): Ver.4.2.1
iPod nano (4th generation): Ver.1.0.4
iPod classic (120GB): Ver.2.0.1
iPod touch (1st generation): Ver.3.1.3
Search Position Memory iPod nano (3rd generation): Ver.1.1.3 PC
iPod classic (80GB, 160GB): Ver.1.1.2
During playback, you can quickly return to the last-selected hierarchy iPod nano (2nd generation): Ver.1.1.3
level in the search mode. iPod with video: Ver.1.3
iPod nano (1st generation): Ver.1.3.1
Press . • Confirmed devices regarding Made for iPhone. Correct function of
The hierarchy you selected last in the search mode is displayed. earlier versions cannot be guaranteed.
iPhone 4: Ver.4.2.1

26-EN
 iPhone 3GS: Ver.4.2.1 Hierarchy 1 Hierarchy 2 Hierarchy 3 Hierarchy 4
iPhone 3G: Ver.4.2.1
Song — — —
iPhone: Ver.3.1.3
• For clarity in identifying your model of iPod, please see Apple’s own Podcast Episode — —
document “Identifying iPod models” at http://support.apple.com/kb/ Genre* Artist* Album* Song
HT1353
Composer* Album* Song —
• This unit does not support video playback from iPod/iPhone, even
using a video-compatible cable. Audiobook — — —
For example:
Searching by Artist name
Setting the iPod Control The following example explains how an ARTIST search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
When an iPod/iPhone is connected, operate it from its own controls or
from the head unit. 1 Press ENTER to activate the search selection mode.
The “” indicator lights up.
Press and hold ENTER for at least 2 seconds to switch
iPod control mode between HU (HEAD UNIT) and iPod. 2 Turn the Rotary encoder to select the ARTIST search
Once the control mode is changed, this will set pause status, mode, and then press ENTER.
press  to continue.
PLAYLIST  ARTIST  ALBUM  SONG  PODCAST  GENRE
HU (HEAD UNIT):  COMPOSER  AUDIOBOOK  PLAYLIST
Operate the iPod/iPhone via this unit.
iPod:
Operate the iPod/iPhone using its own controls. When iPod is
3 Turn the Rotary encoder to select the desired Artist, and
then press ENTER.
selected, some functions will not be operable via the head unit.
Note
• Depending upon the iPod used, iPod control may not be selectable. Or,
4 Turn the Rotary encoder to select the desired Album, and
then press ENTER.
if iPod is selected, operation must still be from the head unit.
5 Turn the Rotary encoder to select the desired Song, and
then press ENTER.
Playback
Notes
• This function is unavailable when iPod is selected in “Setting the iPod
1 Press SOURCE to switch to the iPod mode. Control” (refer to “Setting the iPod Control” on page 27).
For CDE-123, depending on which USB Connector you used, • After pressing and holding ENTER for at least 2 seconds while in
press BAND/F/R to switch iPod source between FRONT and each hierarchy (except SONG and AUDIOBOOK hierarchy), all songs
REAR. of the selected hierarchy are played back.
• After selecting [ALL] in the search mode with “*”, press and hold
2 Press  or  to select the desired song.
ENTER for at least 2 seconds to play back all songs in the iPod/
iPhone or selected search mode.
Pressing and holding  or  will fast backward/fast • While in the search mode, if you press and hold  for 2 seconds, or no
forward the current track. operation is performed for 60 seconds, the search mode is canceled.
• In the search mode, pressing  will return to the previous mode.
3 To pause playback, press . • When search is made during M.I.X. play, the M.I.X. play mode will be
Pressing  again will resume playback. canceled.
• “NO SONG” will be displayed if there are no songs in the selected
Notes playlist in the PLAYLIST search mode.
• A song playing on the iPod/iPhone while it is connected to this unit will • “NO PODCAST” will be displayed if there is no podcast data in the
continue to play from where it was paused after disconnection. iPod/iPhone in the PODCAST search mode.
• If you listen to an episode from a selected Podcast or Audiobook, the • “NOAUDIOBOK” will be displayed if there is no audiobook data in the
episode can be changed by pressing  or . iPod/iPhone in AUDIOBOOK search mode.
• An episode may have several chapters. The chapter can be changed by • If “iPod name” stored in the iPod/iPhone is selected in the desired
pressing  or . Playlist search mode, and ENTER is pressed, you can search for all
songs in the iPod/iPhone. Also, if you press and hold ENTER for at
least 2 seconds, all songs in the iPod/iPhone are played back.
Searching for a desired Song • Depending on the iPod/iPhone, podcast search is not supported.
• If any one of the preset buttons (1 through 6) is pressed in the
search mode, a search can be made quickly by skipping to the specified
An iPod/iPhone can contain hundreds of songs. By using file tag location. For details, refer to “Direct Search Function” on page 28.
information and keeping these songs organized in playlists, this unit’s
search functions will ease song searches.
Each music category has its own individual hierarchy. Use the Playlist/
Artist/Album/Song/Podcast/Genre/Composer/Audiobook search mode
to narrow searches based on the table below.

Hierarchy 1 Hierarchy 2 Hierarchy 3 Hierarchy 4

Playlist Song — —
Artist* Album* Song —
Album* Song — —

27-EN
Direct Search Function Search Position Memory
The unit’s direct search function can be used to search for an album, During iPod/iPhone playback, you can quickly return to the
song, etc., more efficiently. In PLAYLIST/ARTIST/ALBUM/SONG/ last-selected hierarchy level in the search mode.
PODCAST/GENRE/COMPOSER/AUDIOBOOK mode, you can
quickly target any song. Press .
The hierarchy you selected last in the search mode is displayed.
In the search mode, press any one of the preset buttons (1
through 6) to quickly skip over a designated percent of Note
your song content. • This function is unavailable when iPod is selected in “Setting the iPod
Control” (refer to “Setting the iPod Control” on page 27).
Song search example:
If there are 100 songs in your iPod/iPhone, they are divided into 6
groups using percentages (shown below). These groups are
assigned to the preset buttons (1 through 6).
Random Play Shuffle (M.I.X.)
Example 1:
The Shuffle function of the iPod/iPhone is displayed as s on this unit.
Suppose the song you are searching for is located at around the
middle (50%) of your library: press button 4 to jump to the 50th
Shuffle Albums:
song and turn the Rotary encoder to find the desired song.
The songs on each album are played back in proper order. Upon
Example 2: completion of all the songs on the album, the next album is selected
Suppose the song you are searching for is located near the end randomly. This continues until all albums have been played.
(83%) of your library: press button 6 to jump to the 83rd song
and turn the Rotary encoder to find the desired song. Shuffle Songs:
Song shuffle randomly plays back songs within a selected category
All 100 songs (100%) (playlist, album, etc.). The songs within the category are played just
once until all songs have been played.
0% 17% 33% 50% 67% 83%
Preset
1 2 3 4 5 6
1 Press 5 s.
buttons The songs are played back in random sequence.
1st 17th 33rd 50th 67th 83rd s*1  s*2  (off )  s
Songs
song song song song song song *1 Shuffle Albums.
*2 Shuffle Songs.

Select Playlist/Artist/Album/Genre/
2 To cancel M.I.X. play, select (off) with the above procedure.
Note
Composer/Episode • If a song is selected in the album search mode before selecting M.I.X.
play, the songs will not play back randomly even when Shuffle Albums
is selected.
Playlist/Artist/Album/Genre/Composer/Episode can be easily changed.
For example, if you listen to a song from a selected album, the album can Shuffle ALL:
be changed. Shuffle ALL plays all songs in the iPod/iPhone randomly. Any one
song does not play back again until all songs have been played back.
Press  or  to select the desired Playlist/Artist/Album/
Genre/Composer/Episode. 1 Press 6.
The songs are played back in random sequence.
Notes s ALL  (off)  s ALL
• If the song search mode was used to select a song, this function is
inactive. * Shuffle ALL.
• If an album is selected during an artist search, other albums by that
artist are searchable. 2 To cancel M.I.X. play, select (off) with the above procedure.
• This function is inactive during shuffle (M.I.X.) playback. Notes
• If Shuffle ALL is selected, the selected songs being played back in the
search mode are canceled.
Alphabet Skip Function • This function is unavailable when iPod is selected in “Setting the iPod
Control” (refer to “Setting the iPod Control” on page 27).
The initial skip function is skipped to the next number, symbol or letter
such as from A to B, B to C.
You can skip in reverse order such as B to A by pressing .

During search mode, press  or  to perform the

Alphabet Skip Function.
A list is skipped to the next number, symbol or letter.

28-EN
Repeat Play
Pandora Radio (iPhone)
Only Repeat One is available for the iPod/iPhone.

Repeat One:
(Optional)
A single song is repeatedly played back.

1 Press a 4. SOURCE/ Rotary encoder/ /ENTER

The song is played back repeatedly.  1 2

a*  (off)  a
* Repeat One.

2 To cancel repeat play, select (off) with the above

procedure.
Note
• Depending on the connected iPod, track up/down may be not available
during Repeat play.  VIEW
BAND/ F/R 

* The illustration is for CDE-123.

Displaying the Text
Pandora Radio is your own FREE personalized radio now available to
You can display the tag information of a song in the iPod/iPhone. stream music on your iPhone.
Just start with the name of one of your favorite artists, songs or classical
Press VIEW. composers and Pandora will create a “station” that plays their music and
Each press changes the display. more music like it.
The CDE-124SXM/CDE-123/CDE-122 enables you to interact with
Note
your Pandora account, by connecting an iPhone that has the Pandora
• When the TEXT SCR is set to SCR MANUAL, press and hold  for at
least 2 seconds, the current text will be scrolled one time. Compatible Application for iPhone already installed.
TRACK NO./ELAPSED TIME  TRACK NO./CLOCK  ARTIST NAME*
For details on the Pandora Compatible Application for iPhone, visit:
 ALBUM NAME*  SONG TITLE*  TRACK NO./ELAPSED TIME http://www.pandora.com/on-the-iphone
To control Pandora through this CDE-124SXM/CDE-123/CDE-122,
* TAG information you must be running a version of Pandora’s mobile application that
“ARTIST”/“ALBUM”/“SONG” is displayed if there is no tag
supports Pandora link, on a compatible smartphone. For information on
information.
compatible phones and applications, visit www.pandora.com/link.
Notes
Notes
• Only alphanumeric characters (ASCII) can be displayed.
• Some of the Pandora Compatible Application for iPhone functions are
• The maximum number of characters for the head unit is 128 (128 byte).
not controllable from the CDE-124SXM/CDE-123/CDE-122.
• Some characters may not be correctly displayed.
• Pandora is also controllable from an iPod touch with Wi-Fi connection.
• “NO SUPPORT” is displayed if text information is not supported by the
unit.

Listening to Pandora
1 Launch the Pandora Application on the iPhone.

2 Press SOURCE to switch to the PANDORA mode.

Notes
• For CDE-123, depending on which USB Connector you used, press
BAND/F/R to switch Pandora source between FRONT and REAR.
• The Pandora source can be displayed only when PANDORA is set to
ON. For details, refer to “Setting the Pandora Source” on page 22.
• When PANDORA VL is set to other than 0 dB in “Setting the Pandora
Volume” (refer to “Setting the Pandora Volume” on page 22), Pandora
source volume may be higher than other sources.

3 To pause playback, press .

Pressing  again will resume playback.

4 To skip to the next song, press .

Notes
• The operation to replay a previous song is not available.
• Pandora limits the number of skips allowed on their service. If you
attempt to skip songs beyond the limit, “SKIP LIMIT” is displayed.

29-EN
• CDE-124SXM/CDE-123/CDE-122 remembers the source just before
turning off the power. Even if you reconnect an iPod/iPhone without
launching Pandora Application while the power is off, Pandora mode
QuickMix
(not iPod mode) is displayed when power is turned back on.
• Depending on the signal status, song may be stopped during playback. Use QuickMix to create a playlist based on two or more of your Pandora
• The display content may various when advertisement is received. stations. Edit your QuickMix station selections on the Pandora
• The playback time may not be correctly displayed. Compatible Application for iPhone when it is not connected to the
CDE-124SXM/CDE-123/CDE-122.

“Thumbs” Feedback 1 Press ENTER to activate the Search mode.

2 Turn the Rotary encoder to select “A-Z” or “BY DATE”, and

You can personalize your stations with “Thumbs Up” or “Thumbs then press ENTER.
Down” feedback, which the system takes into account for future music The “A-Z” or “By Date” search mode is activated and the station
selections. name is displayed.

During playback, press u or d for thumbs up or thumbs

down.
3 Press ENTER while selecting “QUICKMIX”.
Notes
u: The “u” indicator appears in the display. Pandora will • The songs from the created stations are played back in random
sequence.
add similar music to your station. • Select other station during search mode to cancel QuickMix.
d: The “d” indicator is displayed. Pandora will ban that
song from your station, and the current song is skipped.
If the number of skips allowed has reached its limit, the
current song continues to play back.
Bookmarking a Desired Song or Artist
Note The currently playing song or artist can be bookmarked and saved to
• In some situations, “Thumbs” feedback may not be available. your Pandora account.

1 During playback, press 1b (Bookmarks).

Searching for a Desired Station The Pandora Bookmark screen is displayed.

2 Turn the Rotary encoder to select “SONG (Bookmark)” or

You can display your station list and select stations directly from the “ARTIST (Bookmark)”, and then press ENTER.
CDE-124SXM/CDE-123/CDE-122.
The current song or artist is bookmarked. “BMK SONG” or “BMK
ARTIST” is displayed.
Alphabet Search:
Notes
1 Press ENTER to activate the Search mode. • Your bookmarks can be viewed on your “Profile” page at
www.pandora.com.
2 Turn the Rotary encoder to select “A-Z”, and then press • In some situations, bookmarks may not be available.
ENTER. • When Bookmark operation is failed, BMK N/A will be displayed.
The “A-Z” search mode is activated and the station names are
listed alphabetically.
Creating a New Station
3 Turn the Rotary encoder to select the desired station, and
then press ENTER.
Based on currently playing song or artist, you can create a new station
Pandora will play that station. and save to your Pandora account.

Search by Date Added: 1 During playback, press n 2 (New Station).

1 Press ENTER to activate the Search mode. The Pandora New Station screen is displayed.

2 Turn the Rotary encoder to select “BY DATE”, and then 2 Turn the Rotary encoder to select “SONG” or “ARTIST”, and
press ENTER. then press ENTER.
A “NEW SONG” or “NEW ARTIST” pop-up screen.
The “By Date” search mode is activated and the station names
A New Station based on current song or artist is created.
are listed by the date they were added to the account.
Notes
3 Turn the Rotary encoder to select the desired station, and • Your New Station can be viewed on your “Profile” page at
then press ENTER. www.pandora.com.
Pandora will play that station. • In some situations, creating a new station function may not be
available.
Note • When this operation is failed, N/A will be displayed.
• If any one of the preset buttons (1 through 6) is pressed in the • When the iPhone is not connected to this unit, you can create
search mode, a search can be made quickly by skipping to the specified personalized Pandora stations using the Pandora Application on your
location. For details, refer to “Direct Search Function” on page 28. iPhone. You can also create stations on the web at www.pandora.com.

30-EN
Search Position Memory
SiriusXM Satellite Radio
During playback, you can quickly return to the last-selected hierarchy
level in the search mode. Operation (CDE-124SXM,
Press .
The hierarchy you selected last in the search mode is displayed.
supplied; CDE-123,
optional)
Changing the Display
SOURCE/ Rotary encoder/ /ENTER/ Tag
Press VIEW.
  

Elapsed Time Clock Station Name *

Artist Name * Album Name * Song Title *

Elapsed Time

* TAG information
If there is no text information, nothing will be displayed.   FUNC./VIEW Preset buttons
BAND  (1 through 6)
Notes
• Only alphanumeric characters can be displayed.
• The maximum number of characters is 128 (128 byte). * The illustration is for CDE-123.
• Some characters may not be correctly displayed.
SiriusXM Tuner operation:
When a SiriusXM Tuner is connected to this unit, the following
operations may be performed.

Receiving Channels with the SiriusXM Tuner

(CDE-124SXM, supplied; CDE-123, optional)
About SiriusXM Satellite Radio
Everything worth listening to is on SiriusXM. get over 130 channels,
including the most commercial-free music, plus the best sports, news,
talk and entertainment. A SiriusXM Tuner and Subscription are required.
For more information, visit www.siriusxm.com.
Note
• The SiriusXM Satellite Radio controls on this unit are available only
when a SiriusXM Tuner is connected.

1 Press SOURCE to activate the Satellite Radio

(SIRIUSXM) mode.

2 Press  or  to select the desired channel.

Holding down  or  will rapidly browse through the
channels.
Alternatively, you can enter the number of the desired channel
using the numeric keypad on an optional remote control.

31-EN
Checking the SiriusXM Radio ID Number Category Browsing
To subscribe to the SiriusXM Satellite Radio service, it is necessary to
locate and identify the Radio ID of your SiriusXM Tuner. The Radio ID
1 Press  or  in the SiriusXM mode to activate the
Category Browsing mode.
contains 8 characters and can be found on the bottom of your SiriusXM
Tuner or can be displayed on when selecting Channel 0 by following the
steps below:
2 Press  or  to select desired category.

1 While in the Satellite Radio Mode, press  or  to

3 Turn the Rotary encoder to select a desired channel
within the selected Category , and then press /ENTER.
select channel “0”.
The unit displays “RADIO ID” and ID number alternately. Note
• If no operation is performed for 10 seconds, the Category Browsing
Note mode is canceled.
• The Radio ID does not include the letters I, O, S or F.

2 To cancel the ID number display, select a channel other

than “0”. Storing the desired Artist/Song
While listening to SiriusXM Satellite Radio, you can be alerted when
Storing Channel Presets your favorite songs or artists are playing on other channels. An
interruption ALERT will be displayed when a matching artist or song is
found on another channel. For receiving interruption ALERT
1 Press BAND to select the desired band you want to store information, refer to “Receiving and Tuning to an Alert” on page 33.
the preset in.
There are 3 Satellite Radio Preset bands. 1 Press and hold FUNC./VIEW for at least 2 seconds when a
Each press of BAND changes the band: SXM1  SXM2  SXM3 Song or the song of an Artist you want to store is playing.
 SXM1 The  indicator lights up.

2 Tune to the desired channel and then press and hold one 2 Press the 1 (preset) button to store the Artist/Song.
of the preset buttons (1 through 6), for at least 2 seconds, A note to memorize the ART (artist name) or the SNG (song title)
to store the channel. is displayed.
The display then shows the stored Band and preset number (for Note
example, SXM1-3 is shown when preset 3 of band 1 is selected). • If either the artist name or song title is not available to save,
UNAVAILABL will be displayed.
3 Repeat the procedure to store up to 5 other channels onto
the same band. 3 Turn the Rotary encoder to choose SAVE ART or SAVE SNG
(when available) and then press ENTER.
Notes
• A total of 18 channels can be stored in the preset memory, 6 Channels
for each band (SXM1, SXM2 and SXM3).
4 The new alert was stored in memory.
• If you store a new channel into a preset which already has a channel An “ART/SONG SAVED” pop-up screen is followed by an “X
assigned, the current channel will be cleared and replaced with the new U(sed)/Y E(mpty)”.
one. X is the total number of song titles or artist names stored in
memory, and Y is the total number of memory locations still
available for storage.

Tuning Channels using Presets Notes

• If you try to store when the memory is full, “MEM FULL” is displayed
followed by “REPLACE/CANCEL”. If you want to replace an existing
1 Press BAND to select the desired band of Presets you wish alert item, select “REPLACE” by turning Rotary encoder, and then
to access. press ENTER, the existing alert list stored in memory is displayed.
Select one of the stored alerts using the Rotary encoder. To replace the
2 Press the preset buttons (1 through 6) that has your selected alert, press ENTER and an “ART/SONG SAVED” pop-up
desired Satellite Radio channel stored in memory. screen is followed by an “X U(sed)/Y E(mpty)”.
• You can manage the stored Alert memory setting on Setup mode, for
details, refer to “Managing Artist and Song Alerts” on page 21.
• If no operation is perform for 10 seconds, the setting mode is canceled.

32-EN
Receiving and Tuning to an Alert Using Jump Memory and Jump Recall
Whenever a stored sports team, artist, or song is playing on another
function
channel, an interruption ALERT appears on the unit display. To tune to
the game, artist or song identified by the alert, follow the steps below: 1 While in SiriusXM mode, select your favorite SiriusXM
Channel.
1 Turn the Rotary encoder to select the desired game, artist
or song from the list of active alerts. 2 Press and hold  for at least 2 seconds.
The channel you selected is stored as the Jump Source.
2 Press ENTER.
Notes 3 Press and hold  for at least 2 seconds to recall and tune
• If no operation is performed for 5 seconds, the unit returns to normal to the saved Jump Source channel.
mode. Note
• Sports teams/Artist name and Song title which you have stored and • Pressing and holding  again for at least 2 seconds will jump back to
which are currently playing will be displayed in a category called “MY the previous mode or SiriusXM channel.
GAMES”/“MY MUSIC” in search mode. For details, refer to “Search
Function” on page 33.
Instant Replay Function
Search Function In SiriusXM mode, you can pause, rewind and replay up to 30 minutes
of live SiriusXM Satellite Radio.
You can search for SiriusXM programming content by Category or by
Channel. 1 While listening to a SiriusXM channel, press  to enter
the Replay mode, which mutes the audio.
1 Press ENTER in the SiriusXM mode.
The display will show “PAUSED” while in this mode.
2 Turn the Rotary encoder to select the desired Category,
2 Press  again to resume playback of the stored audio
and then press ENTER.
from the point at which it was paused.
3 Turn the Rotary encoder to select the desired Channel During playback, the SiriusXM Tuner will continue to store the
channel audio until you exit the Instant Replay mode (up to 30
Name, and then press ENTER.
minutes).
Notes
• During channel search, pressing  or  to select another Category. During REPLAY playback:
• The Search mode is canceled if you press and hold  for at least • Fast rewind:
2 seconds, or no operation is performed for 60 seconds in Search mode. Press and hold .
• During Channel search, You can toggle the display between the channel • Fast forward:
name list, artist name list and the song/program title list by pressing Press and hold .
VIEW. • Returning to the beginning of the current song:
• When GAME ALERT is set to ON (refer to “Managing Artist and Song Press . (If you press  in the first 2 seconds of a song,
Alerts” on page 21) and receives a match to one of your favorite teams you return to the beginning of the previous song.)
(refer to “Setting the Favorite Sports Team Alerts” on page 21), the “MY • Advancing to the beginning of the next song:
GAMES” category will be created and will display all stored sports Press .
teams that are currently playing at that time. The MY GAMES category
list will also be accessible via the Search function. To select a game, Notes
follow steps 2 and 3 above. • If you continue to press Fast forward until the end, the Instant Replay
mode is canceled, and the unit will change to live SiriusXM radio
• When either an ARTIST or SONG ALERT program match has been mode.
found, the “MY MUSIC” category list will be created and will be • If you change channels while in Replay mode, the unit will exit Replay
accessible via the Search function. To select a Song or Artist from the mode to live Satellite Radio mode and clear the Replay memory.
list, follow steps 2 and 3 above.
• Press  in the search mode to return to the previous mode. 3 Press  to cancel the INSTANT REPLAY mode.
The unit returns to live SiriusXM radio mode.

Using iTunes tagging

iTunes Tagging lets you tag songs you hear on SiriusXM channels with
your new CDE-124SXM/CDE-123 and then preview, buy, and
download them later from your iTunes Tagged playlist the next time you
sync your iPod/iPhone.
Note
• For details on the iPod/iPhone models usable with this unit, refer to
“Connecting an iPod/iPhone” on page 26.

1 A song may be tagged while listening to a SiriusXM

channel if the display shows the "Tag" icon.

33-EN
2 Press and hold Tag for at least 2 seconds while the desired
song is playing.
The “Tag” blinks at the same time the “TAGGING” is displayed. Information
3 When completed, “TAG STORED” is displayed and the
“Tag” indicator lights up*.
* When completed, “TAG COUNT X” (X is the total amount of
In Case of Difficulty
stored tag information) is displayed if no iPod/iPhone is
connected. If you encounter a problem, please turn the power off, then on again. If
the unit is still not functioning normally, please review the items in the
Notes following checklist. This guide will help you isolate the problem if the
• During tagging, the iPod/iPhone takes priority to save the tag unit is at fault. Otherwise, make sure the rest of your system is properly
information. If no iPod/iPhone is connected, the tag information is
connected or consult your authorized Alpine dealer.
saved to this unit.
• When the memory of iPod/iPhone is full, “iPod FULL” is displayed. The
tag information will be stored to the unit. Basic
• If the tagging operation is interrupted by a source or channel change,
the tagging operation will be canceled and the unit may not display No function or display.
“CANNOT TAG”. • Vehicle’s ignition is off.
• This unit can store up to 50 pieces of tag information. When the – If connected following instructions, the unit will not operate with
memory of the unit is full, “MEMO FULL” may be displayed. the vehicle’s ignition off.
• When an iPod that doesn't support the tagging function is connected, • Improper power lead (Red) and battery lead (Yellow) connections.
“NON-TAGGING IPOD” may be displayed. – Check power lead and battery lead connections.
• When the iPod/iPhone is disconnected from the unit during tagging, its • Blown fuse.
tag information will be stored in the unit. – Check the fuse of the unit; replace with the proper value if
• If there is stored tag information on the unit, when an iPod/iPhone necessary.
supporting the tag function is connected, the stored tag information will • Internal micro-computer malfunctioned due to interference noise
be transferred to the iPod/iPhone automatically. When the iPod/iPhone etc.
memory becomes full, “iPod FULL” will be displayed, and any – Press the RESET switch with a ballpoint pen or other pointed
remaining tag information on the unit will not be transferred to the article.
iPod/iPhone.
• If tag information already exists, “ALREADY TAGGED” will be
displayed when you try to tag information again.
Radio
• Tagging may be canceled by changing the frequency or station, and the
Unable to receive stations.
message “CANNOT TAG”, etc., may not be displayed.
• No antenna or open connection in cable.
• If a song is tagged and the remaining storage volume of the connected
– Make sure the antenna is properly connected;
iPod/iPhone is sufficient to hold the song’s tag information, it will be
saved on the iPod/iPhone. replace the antenna or cable if necessary.
• If there is stored tag information on CDE-123, when two iPod/iPhone Unable to tune stations in the seek mode.
models supporting the tag function are connected, the Tag information • You are in a weak signal area.
will be transferred to the iPod/iPhone with which the USB terminal is – Make sure the tuner is in the DX mode.
activated automatically. When the iPod/iPhone memory becomes full, • If the area you are in is a primary signal area, the antenna may not be
“iPod FULL” will be displayed, and any remaining tag information on
grounded and connected properly.
the unit will not be transferred to the iPod/iPhone.
– Check your antenna connections; make sure the antenna is
properly grounded at its mounting location.
• The antenna may not be the proper length.
Changing the Display – Make sure the antenna is fully extended; if broken, replace the
antenna with a new one.
Text information, such as the channel name, artist name/feature and Broadcast is noisy.
song/program title, is available with each SiriusXM channel. The unit • The antenna is not the proper length.
can display this text information as explained below. – Extend the antenna fully; replace it if it is broken.
• The antenna is poorly grounded.
1 In SiriusXM mode, press VIEW.
– Make sure the antenna is grounded properly at its mounting
Each time you press this button, the display changes as shown location.
below.
Band/Channel Number  Clock  Channel Name*1  Artist CD
Name*1  Song Title*1  Content info.*1  Category Name*1 
Band/Channel Number CD Player not functioning.
*1 If there is no text information, nothing will be displayed. • Out of operating temperature range +50°C (+120°F) for CD.
– Allow the vehicle’s interior (or trunk) temperature to cool.
Note
• When the “TEXT SCR” (refer to “Scroll Setting (TEXT SCR)” on CD playback sound is wavering.
page 21) is set to “AUTO,” the display scrolls continuously. When the • Moisture condensation in the CD Module.
“TEXT SCR” is set to “MANUAL,” the display scrolls only once after – Allow enough time for the condensation to evaporate (about
any function is performed (PRESET, BAND, SEARCH, etc.).
1 hour).
CD insertion not possible.
• A CD is already in the CD player.
– Eject the CD and remove it.

34-EN
• The CD is being improperly inserted.
– Make sure the CD is being inserted following instructions in the
CD Player Operation section.
Unable to fast forward or backward the CD. • Mechanism error.
• The CD has been damaged. 1 Press the  button and eject the CD.
– Eject the CD and discard it; using a damaged CD in your unit can If not ejecting, consult your Alpine dealer.
cause damage to the mechanism. 2 When the error indication remains after ejecting, press the 
button again.
CD playback sound skips due to vibration. If the error indication still does not turn off after pressing the 
• Improper mounting of the unit. button for a few times, consult your Alpine dealer.
– Securely re-mount the unit. • When “ERROR” is displayed:
• The disc is very dirty. If the disc cannot be ejected by pressing , press the RESET switch
– Clean the disc. (Refer to “Initial System Start-Up” on page 10) and press  again.
• The disc has scratches. If the disc still cannot be ejected, consult your Alpine dealer.
– Change the disc.
• The pick-up lens is dirty.
– Do not use a commercially available lens cleaner disc. Consult
your nearest Alpine dealer.
• A copy-protected WMA file was played back.
CD playback sound skips without vibration.
– You can only play back non-copy-protected files.
• The disc is dirty or scratched.
– Clean the disc; damaged disc should be replaced.
Error displays (built-in CD player only).
• Mechanical error
– Press . After the error indication disappears, insert the disc • A sampling rate/bit rate not supported by the unit is used.
again. If the above-mentioned solution does not solve the problem, – Use a sampling rate/bit rate that is supported by the unit.
consult your nearest Alpine dealer.
CD-R/CD-RW playback not possible. Indication for Flash Memory/Portable
• Close session (finalization) has not been performed. audio player
– Perform finalization and attempt playback again.

MP3/WMA/AAC
MP3, WMA or AAC is not played back. • Database error or decoder error.
• Writing error occurred. The MP3/WMA/AAC format is not – You can solve the problem by switching the source.
compatible.
– Make sure the MP3/WMA/AAC has been written in a supported
format. Refer to “About MP3/WMA/AAC” on page 13, then
rewrite in the format supported by this device.
• Communication error or boot error, etc.
– You can solve the problem by reconnecting the Flash Memory/
Audio
Portable audio player or changing source.
The sound is not output from the speakers.
• Unit has no output signal of the internal amplifier.
– POWER IC is switched to “ON”, refer to “Connecting to an
External Amplifier (POWER IC)” on page 20.
• Abnormal current is run to the USB connector device.
– You can solve the problem by switching the source.
iPod
iPod does not play and no sound is output.
• The iPod has not been recognized.
or
– Reset this unit and the iPod. Refer to “Initial System Start-Up” on
• No song (file) is stored in the Flash Memory/Portable audio player.
page 10. To reset the iPod, refer to the Owner’s Manual of the iPod.
– Connect the Flash Memory device/Portable audio player after
storing songs (files).
Indication for CD Player

• A sampling rate/bit rate not supported by the unit is used.

• No CD is inserted.
– Use a sampling rate/bit rate that is supported by the unit.
– Insert a CD.
• Although a disc is inserted, “NO DISC” is displayed and the unit does
not start to play or eject the disc.
– Remove the disc by following these steps:
Press the  button again for at least 2 seconds. • A copy-protected WMA file was played back.
If the disc still does not eject, consult your Alpine dealer. – You can only play back non-copy-protected files.

35-EN
 SiriusXM Advisory Messages
NO SUPPORT
(CDE-124SXM/CDE-123 only)
• Text information that is not recognizable by the unit has been input.
– Use a Flash Memory device with input text information that is The following messages may be displayed while operating the unit in
supported by the unit. SiriusXM mode.

Indication for iPod Mode

• The SiriusXM Tuner is disconnected or the unit is having trouble
communicating with the Tuner.
– Connect the Tuner or check the Tuner connection to the back of
• There are no songs in the iPod/iPhone. the unit.
– Download songs to the iPod/iPhone and connect to this unit.

• The SiriusXM Satellite Radio antenna or cable is either damaged or

• Database error or decoder error. not connected correctly to the SiriusXM Tuner.
– You can solve the problem by switching the source. – Check that the SiriusXM antenna cable is connected to the
SiriusXM Tuner and check that the antenna cable is not kinked or
otherwise damaged. Replace the antenna if necessary.

• Communication error or boot error, etc.

– You can solve the problem by reconnecting the iPod/iPhone or
changing source. • The SiriusXM satellite signal is too weak at the current location.
– Move the vehicle to a location with a clear view of the southern
sky.
– Make sure the Satellite Radio antenna is properly mounted and not
obstructed by metal objects.
• The iPod/iPhone is not verified.
– You can solve the problem by reconnecting the iPod/iPhone.

• The active channel has become unsubscribed or the requested

channel is not available in your subscription package.
• Abnormal current is run to the USB connector device. Note
– You can solve the problem by switching the source. • The unit will revert to the previous selected channel or to channel 1
automatically.
– Visit www.siriusxm.com for information on subscribing to this
Indication for Pandora Radio Mode channel.

NO STATION
• You have not created any personalized Pandora Stations.
• The active channel is no longer in the SiriusXM channel lineup or the
– When you are not driving, use the Pandora Compatible
user has entered an invalid channel number.
Application for iPhone to create your Pandora station(s).
Note
• The unit will revert to the previous channel or to channel 1
SEE DEVICE automatically.
– Visit www.siriusxm.com for information on the current channel
• The music cannot be played because the Pandora Compatible lineup.
Application for iPhone requires the user’s attention.
– When you are not driving, please see the Pandora Compatible
Application for iPhone. 
• Your subscription has been updated.
NO SERVICE – Press any button to clear this message.

• You switched CDE-124SXM/CDE-123/CDE-122 to Pandora mode

by pressing SOURCE with an iPhone or iPod touch connected,
without launching or installing the Pandora Application.
– Launch the Pandora Application on the iPhone or iPod touch.
– Select a source other than Pandora by pressing SOURCE.

36-EN
  
• A locked channel is selected.
– Input the passcode. On how to input passcode, refer to “How to
input passcode?” on page 22.
Note
• If wrong passcode is input, “WRONG CODE” will be displayed and the
unit will revert to the previous selected channel.

• Buffer for Instant Replay will full within 11 seconds.

• Buffer for Instant Replay is full.

37-EN
 CHASSIS SIZE
Specifications Width 178 mm (7")
Height 50 mm (2")
Depth 161 mm (6~3/8")
FM TUNER SECTION
Tuning Range 87.7~107.9 MHz
NOSEPIECE SIZE
Mono Usable Sensitivity 9.3 dBf (0.8 μV/75 ohms) Width 170 mm (6~3/4")
50 dB Quieting Sensitivity 13.5 dBf (1.3 μV/75 ohms) Height 46 mm (1~13/16")
Alternate Channel Selectivity 80 dB Depth 25 mm (1")
Signal-to-Noise Ratio 65 dB
Stereo Separation 35 dB Note
Capture Ratio 2.0 dB • Due to continuous product improvement, specifications and design are
subject to change without notice.
AM TUNER SECTION
Tuning Range 530-1,710 kHz
Sensitivity (IEC Standard) 22.5 μV/27 dB

CD PLAYER SECTION
Frequency Response 5~20,000 Hz (±1 dB)
Wow & Flutter (% WRMS) Below measurable limits
Total Harmonic Distortion 0.008% (at 1 kHz)
Dynamic Range 95 dB (at 1 kHz)
Signal-to-Noise Ratio 105 dB
Channel Separation 85 dB (at 1 kHz)

USB SECTION
USB requirements USB 1.1/2.0
Max. Power Consumption 500 mA
USB Class Mass Storage
File System FAT 12/16/32
MP3 Decoding MPEG-1/2 AUDIO Layer-3
WMA Decoding Windows Media™ Audio
AAC Decoding AAC-LC format “.m4a” file
Number of Channels 2-Channel (Stereo)
Frequency Response* 5~20,000 Hz (±1 dB)
Total Harmonic Distortion 0.008% (at 1 kHz)
Dynamic Range 95 dB (at 1 kHz)
Signal-to-Noise Ratio 105 dB
Channel Separation 85 dB (at 1 kHz)

* Frequency response may differ depending on the encoder software/bit

rate.

PICKUP
Wave length 795 nm
Laser power CLASS I

GENERAL
Power Requirement 14.4 V DC
(11~16 V allowable)
Power Output 18 W RMS × 4*
Maximum Pre-Output Voltage
CDE-123 4 V/10 k ohms
CDE-124SXM/CDE-122 2 V/10 k ohms
Bass ±14 dB at 100 Hz
Mid ±14 dB at 1 kHz
Treble ±14 dB at 10 kHz
Weight 1.6 kg (3 lbs. 8 oz)

* Primary amplifier ratings per CEA-2006 Standard

• Power output: measured at 4 Ohms and ≤ 1% THD+N
• S/N: 80 dBA (reference: 1 W into 4 Ohms)

38-EN
Installation and Connections
Before installing or connecting the unit, please read the following
and refer to “Operating Instructions” on page 6 for proper use. CAUTION
WARNING HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
MAKE THE CORRECT CONNECTIONS. where you purchased this product to have the work done.
Failure to make the proper connections may result in fire or
product damage. USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.
Be sure to use only the specified accessory parts. Use of other than
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. designated parts may damage this unit internally or may not
(Check with your dealer if you are not sure.) Failure to do so may securely install the unit in place. This may cause parts to become
result in fire, etc. loose resulting in hazards or product failure.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP
TERMINAL. METAL EDGE.
Failure to do so may result in electric shock or injury due to Route the cables and wiring away from moving parts (like the seat
electrical shorts. rails) or sharp or pointed edges. This will prevent crimping and
damage to the wiring. If wiring passes through a hole in metal, use a
DO NOT SPLICE INTO ELECTRICAL CABLES. rubber grommet to prevent the wire’s insulation from being cut by
Never cut away cable insulation to supply power to other the metal edge of the hole.
equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock. DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.
Avoid installing the unit in locations with high incidence of
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES. moisture or dust. Moisture or dust that penetrates into this unit may
When drilling holes in the chassis for installation, take precautions result in product failure.
so as not to contact, damage or obstruct pipes, fuel lines, tanks or
electrical wiring. Failure to take such precautions may result in fire.
PRECAUTIONS
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO
• Be sure to disconnect the cable from the (−) battery post before
MAKE GROUND CONNECTIONS. installing your CDE-124SXM/CDE-123/CDE-122. This will reduce
Bolts or nuts used for the brake or steering systems (or any other any chance of damage to the unit in case of a short-circuit.
safety-related system), or tanks should NEVER be used for • Be sure to connect the color coded leads according to the diagram.
installations or ground connections. Using such parts could disable Incorrect connections may cause the unit to malfunction or damage
control of the vehicle and cause fire etc. to the vehicle’s electrical system.
• When making connections to the vehicle’s electrical system, be aware
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF of the factory installed components (e.g. on-board computer). Do not
CHILDREN. tap into these leads to provide power for this unit. When connecting
the CDE-124SXM/CDE-123/CDE-122 to the fuse box, make sure the
Swallowing them may result in serious injury. If swallowed, consult
fuse for the intended circuit of the CDE-124SXM/CDE-123/CDE-122
a physician immediately. has the appropriate amperage. Failure to do so may result in damage
to the unit and/or the vehicle. When in doubt, consult your Alpine
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE dealer.
OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT. • The CDE-124SXM/CDE-123/CDE-122 uses female RCA-type jacks
Doing so may obstruct forward vision or hamper movement etc. for connection to other units (e.g. amplifier) having RCA connectors.
and results in serious accident. You may need an adaptor to connect other units. If so, please contact
your authorized Alpine dealer for assistance.
• Be sure to connect the speaker (−) leads to the speaker (−) terminal.
Never connect left and right channel speaker cables to each other or
to the vehicle body.

IMPORTANT
Please record the serial number of your unit in the space provided
below and keep it as a permanent record. The serial number or the
engraved serial number is located on the bottom of the unit.
SERIAL NUMBER: [ ]
INSTALLATION DATE: [ ]
INSTALLATION TECHNICIAN: [ ]
PLACE OF PURCHASE: [ ]

39-EN
Installation Hex Nut (M5) Screw

*2
Caution Bolt Stud
When you install this unit in your car, do not remove the
detachable front panel.
If the detachable front panel is removed during installation, you Metal
might press too hard and warp the metal plate that holds it in Mounting
Strap
place. *1
The main unit must be mounted within 35 degrees of the
horizontal plane, back to front.
This unit
Ground Lead
Chassis

Detachable Front Note

Panel • For the screw marked “*2”, use an appropriate screw for the chosen
mounting location.

3 Slide the CDE-124SXM/CDE-123/CDE-122 into the

dashboard until it clicks. This ensures that the unit is
Less than 35°
properly locked and will not accidentally come out from
the dashboard.

Removal
1 Remove the mounting sleeve from the main unit (refer to 1 Remove the detachable front panel.
“Removal” on page 40).
2 Insert the bracket keys into the unit, along the guides on
Mounting Sleeve (Included) either side. The unit can now be removed from the
mounting sleeve.
Dashboard
This unit

Bracket keys
(Included)

Pressure Plates*
This unit
3 Pull the unit out, keeping it unlocked as you do so.
* If the installed mounting sleeve is loose in the dashboard, the
pressure plates may be bent slightly to remedy the problem. JAPANESE CAR

2 Reinforce the head unit with the metal mounting strap

(not supplied). Secure the ground lead of the unit to a
clean metal spot using a screw (*1) already attached to the
vehicle’s chassis. Front Frame
Connect each input lead coming from an amplifier or equalizer
to the corresponding output lead coming from the left rear of Screws (M5 × 8)
This unit (Included)
the CDE-124SXM/CDE-123/CDE-122. Connect all other leads of
the CDE-124SXM/CDE-123/CDE-122 according to details Ground Lead
described in the CONNECTlONS section.
*3

Mounting Bracket

Note
• Secure the ground lead of the unit to a clean metal spot using a screw
(*3) already attached to the vehicle’s chassis.

40-EN
 Remove the iPod/iPhone
iPod/iPhone Connection (sold separately)
Remove the iPod/iPhone from Interface cable for iPod.
1 Connect USB cable to an iPod/iPhone with Interface cable
for iPod.

USB cable (CDE-124SXM/CDE-122,

sold separately; CDE-123, supplied)

Notes
• This unit can charge the iPod/iPhone of the current source, and it may
stop charging when another source is switched.
• After changing the unit to a source other than the USB iPod, remove the
Interface cable for iPod (CDE-124SXM/CDE-122, sold separately;
CDE-123, supplied) iPod/iPhone. If the iPod/iPhone is removed in the USB iPod mode, data
may cause damage.
• If sound is not output or the iPod/iPhone is not recognized even when
2 Connect the USB cable to the USB connector of this unit. the iPod/iPhone is connected, remove the iPod/iPhone once, then
connect it again, or reset the iPod.
When connect to Front USB Connection Terminal • Do not leave the iPod/iPhone in a vehicle for a long time. Heat and
humidity may damage the iPod/iPhone and you may not be able to play
it again.
1 Open the cover of the USB Connection Terminal.

2 Connect the Interface cable for iPod directly to the USB

Rear Flash Memory Connection (CDE-123
Connection Terminal, or via the USB cable. only) (sold separately)

This unit USB Connection Terminal Connect Flash Memory

Connect the USB cable to the Rear USB connector of the unit, and then
secure the connection using the lock case supplied with USB cable as
shown below.

This unit lock case Flash Memory

(sold separately)
or

Cable (supplied)
USB Connector

Interface cable for iPod Cable (sold Remove Flash Memory

(CDE-124SXM/CDE-122, sold separately; separately)
CDE-123, supplied) Pull out Flash Memory squarely from the USB cable.

This unit Flash Memory

USB Connector (sold separately)
When connect to Rear USB Connector (CDE-123
only)
Connect the USB cable to the Rear USB connector of the unit, and then
Cable (supplied)
secure the connection using the lock case supplied with USB cable as
shown below.
Notes
• When removing Flash Memory, pull it out straight.
• If sound is not output or Flash Memory is not recognized even when
Interface cable for iPod (supplied) Flash Memory is connected, remove Flash Memory once, then connect
it again.
This unit lock case • Change to a source other than the Flash Memory mode, then remove
the Flash Memory. If the Flash Memory is removed in the Flash
Memory mode, data may be damaged.
• Route the USB cable away from another cables.
Cable (supplied)
Rear USB Connector

41-EN
Connections

CDE-123 only To BLUETOOTH INTERFACE

(sold separately)
To steering remote control
interface box
To Flash memory/Portable audio
player or iPod/iPhone

Antenna

(Blue) POWER ANT

To power antenna

(Blue/White) REMOTE TURN-ON

To amplifier

(Pink/Black) AUDIO INTERRUPT IN

To vehicle phone

(Orange) ILLUMINATION
To the instrument cluster
illumination lead
(Red) IGNITION

Ignition Key
(Yellow) BATTERY

(Black) GND
Battery
(Gray)
Speakers
SPEAKER
RIGHT FRONT Front right
(Gray/Black)
(Violet/Black)
SPEAKER
RIGHT REAR
Rear right
(Violet)
(Green)
SPEAKER
LEFT REAR
Rear left
(Green/Black)
(White/Black)
SPEAKER
LEFT FRONT
Front left
(White) Speakers

CDE-123 only Front Left

Amplifier
Front Right

Rear Left
Amplifier
Rear Right

CDE-123:
Subwoofers
Amplifier CDE-124SXM/CDE-122:
Front or Subwoofers*1

*1 When Subwoofer is OFF: Output is for Front speakers. When Subwoofer is ON: Output is for Subwoofer.
For details on how to set the Subwoofer to ON/OFF, refer to “Turning Subwoofer ON/OFF” on page 16.

42-EN
 BLUETOOTH interface Connector (CDE-123 only)  Right Front (+) Speaker Output Lead (Gray)
Connect this to an optional BLUETOOTH INTERFACE. To use a  Right Front (–) Speaker Output Lead (Gray/Black)
hands-free mobile phone, an optional BLUETOOTH INTERFACE
connection is required. For details on connection, refer to the  Right Rear (–) Speaker Output Lead (Violet/Black)
Owner’s Manual of the BLUETOOTH INTERFACE.
You can also connect this to an external device (such as a portable  Right Rear (+) Speaker Output Lead (Violet)
player) by using Conversion cable (KCE-237B) for building up the AUX  Left Rear (+) Speaker Output Lead (Green)
IN (sold separately).
 Left Rear (–) Speaker Output Lead (Green/Black)
Note
• Refer to “Setting the AUX REAR Setup Mode (AUX-R SET) (CDE-123  Left Front (–) Speaker Output Lead (White/Black)
only)” on page 19.
 Left Front (+) Speaker Output Lead (White)
AUX-R ON :
When the external device is connected.  Fuse Holder (10A)
AUX-R OFF :
When set to OFF, AUX REAR source cannot be selected.  SiriusXM Tuner connector (CDE-124SXM/CDE-123 only)
Connect to a SiriusXM Tuner.
 Steering Remote Control Interface Connector (CDE-123
only)  Front Output RCA Connectors
To steering remote control interface box. For details, contact your RED is right and WHITE is left.
Alpine dealer.  Rear Output RCA Connectors
 Rear USB Connector (CDE-123 only) RED is right and WHITE is left.
Connect this to an Flash Memory/Portable audio player or to an iPod/  Subwoofer Output RCA Connectors (CDE-123 only)
iPhone. To use an iPod/iPhone, Interface cable for iPod connection is RED is right and WHITE is left.
required.
 Front/Subwoofer Output RCA Connectors (CDE-124SXM/
Notes CDE-122 only)
• Use the supplied USB cable. If a USB cable other than the supplied is
RED is right and WHITE is left.
used, correct performance cannot be guaranteed.
• Route the USB cable away from other cables.  Power Supply Connector
 Antenna Receptacle  RCA Extension Cable (sold separately)
 Power Antenna Lead (Blue)  BLUETOOTH INTERFACE Connection Cable (Included with
Connect this lead to the +B terminal of your power antenna, if BLUETOOTH INTERFACE)
applicable.
 Front AUX Input Terminal
Note This terminal allows for input of audio from an external device (such
• This lead should be used only for controlling the vehicle’s power as a portable player), using a commercially-available converter cable.
antenna. Do not use this lead to turn on an amplifier, or a signal
processor, etc.  Front USB Terminal
Connect this to an Flash Memory/Portable audio player or to an iPod/
 Remote Turn-On Lead (Blue/White)
iPhone. To use an iPod/iPhone, Interface cable for iPod connection is
Connect this lead to the remote turn-on lead of your amplifier. required.
 Audio Interrupt In Lead (Pink/Black)
Connect this lead to the Audio interface output of a cellular phone To prevent external noise from entering the audio system.
which provides ground shorting when a call is received. • Locate the unit and route the leads at least 10 cm away from the
 Illumination Lead (Orange) car harness.
This lead may be connected to the vehicle’s instrument cluster • Keep the battery power leads as far away from other leads as
illumination lead. This will allow the backlighting of the possible.
CDE-124SXM/CDE-123/CDE-122 to dim whenever the vehicle’s lights • Connect the ground lead securely to a bare metal spot (remove
are turned on. any paint, dirt or grease if necessary) of the car chassis.
 Switched Power Lead (Ignition) (Red) • If you add an optional noise suppressor, connect it as far away
Connect this lead to an open terminal on the vehicle’s fuse box or from the unit as possible. Your Alpine dealer carries various
another unused power source which provides (+)12V only when the noise suppressors, contact them for further information.
ignition is turned on or in the accessory position. • Your Alpine dealer knows best about noise prevention
 Battery Lead (Yellow) measures so consult your dealer for further information.
Connect this lead to the positive (+) post of the vehicle’s battery.
 Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle. Make sure
the connection is made to bare metal and is securely fastened using
the sheet metal screw provided.

43-EN
 LIMITED WARRANTY
ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. (“Alpine”), are dedicated to quality craftsmanship and are pleased to offer
this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer or contact Alpine at one of the
telephone numbers listed below.

 PRODUCTS COVERED:  You must supply proof of your purchase of the product.
This Warranty covers Car Audio Products and Related Accessories (“the  You must package the product securely to avoid damage during
product”). Products purchased in the Canada are covered only in the shipment. To prevent lost packages it is recommended to use a
Canada. Products purchased in the U.S.A. are covered only in the U.S.A. carrier that provides a tracking service.

 LENGTH OF WARRANTY:  HOW WE LIMIT IMPLIED WARRANTIES:

This Warranty is in effect for one year from the date of the first ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR USE AND
consumer purchase. MERCHANTABILITY ARE LIMITED IN DURATION TO THE PERIOD OF THE
EXPRESS WARRANTY SET FORTH ABOVE AND NO PERSON IS
 WHO IS COVERED: AUTHORIZED TO ASSUME FOR ALPINE ANY OTHER LIABILITY IN
This Warranty only covers the original purchaser of the product, who CONNECTION WITH THE SALE OF THE PRODUCT.
must reside in the United States, Puerto Rico or Canada.
 HOW WE EXCLUDE CERTAIN DAMAGES:
 WHAT IS COVERED: ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR INCIDENTAL AND
This Warranty covers defects in materials or workmanship (parts and CONSEQUENTIAL DAMAGES CAUSED BY THE PRODUCT. THE TERM
labor) in the product. “INCIDENTAL DAMAGES” REFERS TO EXPENSES OF TRANSPORTING
THE PRODUCT TO THE ALPINE SERVICE CENTER, LOSS OF THE
 WHAT IS NOT COVERED: ORIGINAL PURCHASER’S TIME, LOSS OF THE USE OF THE PRODUCT,
This Warranty does not cover the following: BUS FARES, CAR RENTALS OR OTHERS COSTS RELATING TO THE CARE
 Damage occurring during shipment of the product to Alpine for AND CUSTODY OF THE PRODUCT. THE TERM “CONSEQUENTIAL
repair (claims must be presented to the carrier). DAMAGES” REFERS TO THE COST OF REPAIRING OR REPLACING OTHER
 Damage caused by accident or abuse, including burned voice coils PROPERTY WHICH IS DAMAGED WHEN THIS PRODUCT DOES NOT
caused by over-driving the speaker (amplifier level is turned up WORK PROPERLY. THE REMEDIES PROVIDED UNDER THIS WARRANTY
and driven into distortion or clipping). Speaker mechanical failure ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS.
(e.g. punctures, tears or rips). Cracked or damaged LCD panels.
Dropped or damaged hard drives.  HOW STATE/PROVINCIAL LAW RELATES TO THE
 Damage caused by negligence, misuse, improper operation or WARRANTY:
failure to follow instructions contained in the Owner’s manual. This Warranty gives you specific legal rights, and you may also have
 Damage caused by act of God, including without limitation, other rights which vary from state to state and province to province. In
earthquake, fire, flood, storms or other acts of nature. addition, some states/provinces do not allow limitations on how long
Any cost or expense related to the removal or reinstallation of the an implied warranty lasts, and some do not allow the exclusion or
product. limitation of incidental or consequential damages. Accordingly,
limitations as to these matters contained herein may not apply to you.
 Service performed by an unauthorized person, company or
association.
 IN CANADA ONLY:
 Any product which has the serial number defaced, altered or
This Warranty is not valid unless your Alpine car audio product has
removed.
been installed in your vehicle by an Authorized Installation Center, and
 Any product which has been adjusted, altered or modified without this warranty stamped upon installation by the installation center.
Alpine’s consent.
 Any product not distributed by Alpine within the United States,  HOW TO CONTACT CUSTOMER SERVICE:
Puerto Rico or Canada. Should the product require service, please call the following number
 Any product not purchased from an Authorized Alpine Dealer. for your nearest Authorized Alpine Service Center.

 HOW TO OBTAIN WARRANTY SERVICE: CAR AUDIO 1-800-ALPINE-1 (1-800-257-4631)

 You are responsible for delivery of the product to an Authorized NAVIGATION 1-888-NAV-HELP (1-888-628-4357)
Alpine Service Center or Alpine for repair and for payment of any Or visit our website at; http://www.alpine-usa.com
initial shipping charges. Alpine will, at its option, repair or replace
the product with a new or reconditioned product without charge.
If the repairs are covered by the warranty, and if the product was
shipped to an Authorized Alpine Service Center or Alpine, Alpine
will pay the return shipping charges.
 You should provide a detailed description of the problem(s) for
which service is required.

ALPINE ELECTRONICS OF AMERICA, INC., 19145 Gramercy Place, Torrance, California 90501, U.S.A.
ALPINE ELECTRONICS OF CANADA, INC., 777 Supertest Road, Toronto, Ontario M3J 2M9, Canada
Do not send products to these addresses.
Call the toll free telephone number or visit the website to locate a service center.