Crouse Hinds Led Family Brochure

Global LED lighting portfolio
Safe. Reliable. Efficient.

Global LED solutions for harsh and
hazardous environments
Global LED solutions for harsh
and hazardous environments
Safe.
Reliable.
Efficient.
Featuring the industry's broadest range of LED
luminaires for harsh, hazardous and industrial
environments. As an industry-leader, Eaton's
broad range of Crouse-Hinds series LED
luminaires are designed for safety, reliability
and efficiency in harsh, hazardous and industrial
environments.
Why LED? Why Crouse-Hinds series LED?
Energy efficiency
LED average energy Industry-best reliability
consumption is significantly Built to withstand a wide
less than traditional array of applications
fluorescent and HID fixtures
Thermal management
Start/restart time Effective heat sinking
Instant illumination vs. 10 ensures longer life
minute restrike time for HID
Quality of light
Light quality Custom optics designed to
Higher color rendering maximize light distribution
compared to fluorescent and intensity
and HID
Globally certified
Environmental benefits Designed to global
Mercury-free LED eliminates specifications for NEC and
disposal costs and lowers IEC applications, including
energy consumption for a many local certifications for
smaller carbon footprint regional markets
Serviceable drivers
Easy access to drivers for
service or replacement
2 CROUSE-HINDS series LED lighting solutions

Crouse-Hinds series LED family selection guide
Find out which solution is right for you
Selection guide – Hazardous areas
Area Equivalent light Lumen Temp Emergency DLC
classification Application Product output level Range† battery option qualified
Champ™
Flood 3,300 - +65ºC
FMVA 11 models - 70W to
50,500
1500W HID replacement -40ºC
lumens
IECEx (select models)*
Champ™
High/mid bay 3,250 - +65ºC
VMVL 9 models - 70W to
25,000
lumens
IECEx (select models)*
Champ™
High/mid bay VMV 3,300 - +65ºC
5 models - 70W to
Connected 11,000
lumens
(select models)*
Mid/low bay NLE 3,000 - +55ºC

4 models - 70W to
8,000 N/A
lumens
IECEx
Champ™
Linear 4,000 - +65ºC
MLLA 2 models - 2 lamp T5HO
8,000
replacement -40ºC
lumens
(select models)*
Class I, Division 2, Linear Pauluhn™ 13,000 - +55ºC

Class II Summit 3 models - up to 6 lamp
25,100
and/or T5HO replacement -40ºC
Zone 2 & Zone 22 lumens
(select models)*
CEAG
Linear 3 models - 2x18W, 2,100 - +50ºC
nLLK15
2x36W and 2x58W 9,300 N/A
fluorescent replacement lumens -25ºC
Linear nHLL 4 models - 2x18W, 3,000 - +55ºC

2x36W and 2x58W 8,000 N/A
IECEx
Vaporgard™
Low bay 2 models - 100W to 1,700 - +55ºC
V2L/V3L
200W incandescent & 3,300
50W-70W HID lumens -30ºC
(select models)*
N2LPS, UX,
Emergency Ex-Lite, Exit, Varies
and exit Exit2 N/A N/A by N/A
family
IECEx
Champ™
Wallpack 3,400 - +55ºC
CPMV 3 models - 70W to
6,800
lumens
(pending)*
Many of our LED families also have local certifications for specific regional markets (China, Brazil, India, Russia, EAC, etc). Please contact your local Eaton
Crouse-Hinds series sales rep or Customer Service center for more information.
† Operating temperature range may vary by lumen models within a product family. Refer to product catalog pages for complete temperature range details.
* Refer to www.designlights.org Qualified Products List under family models for full listing details.
Not all models are approved for all application categories.
CROUSE-HINDS series LED lighting solutions 3

Crouse-Hinds series LED family selection guide
Selection guide – Hazardous areas
Area Equivalent light Lumen Extreme DLC
classification Application Product output level ambients† Battery option qualified
CEAG
Floodlight 5,000 - +55ºC
PXLED 6 models - 70W to 600W
30,000 N/A
HID replacement
IECEx lumens -50ºC
Hazard-Gard™
High/mid bay 6,200 - +65ºC
EVLLA/nEVLLA 5 models - 100W to
13,000
lumens
(select models)*
High/mid bay HPLN 3,400 - +55ºC

8 models - 70W to
24,200 N/A
1,000W HID replacement -40ºC
IECEx lumens
Mid/low bay HPL 3,000 - +50ºC

4 models - 70W to
8,000 N/A
IECEx lumens
Hazard-Gard™
Linear 3,800 - +65ºC
XPLA 2 models - 2 lamp T5HO
8,300 N/A
replacement -40ºC
lumens
Linear CEAG Ex-Lin 4 models - 2x18W, 2,750 - +55ºC

2x36W and 2x58W 11,230 N/A
IECEx
Class I, Division 1 CEAG
Linear eLLK LED
2 models - 2x18W and 2,100 - +55ºC
Class II
and/or
2x36W fluorescent 5,350 N/A
IECEx replacement lumens -25ºC
Zone 1 & Zone 21
Linear HLL 2 models - 2x18W and 2,800 - +55ºC

2x36W fluorescent 5,700 N/A
replacement lumens -40ºC
IECEx
HRL
Linear RECESSED 3 models - 2x18W, 2,700 - +55ºC
2x36W and 4x18W 5,500 N/A
IECEx fluorescent replacement lumens -40ºC
Linear RLF LED 3 models - 2x18W, 3,100 - +60ºC

2x36W and 2x54W 7,400 N/A
IECEx fluorescent replacement lumens -40ºC
Linear VLL LED 3 models - 2x18W, +55ºC

2x36W and 2x58W N/A
IECEx fluorescent replacement -40ºC
Hazard-Gard™ 2 models - 100W to

Low bay 1,500 - +55ºC
EV LED 200W incandescent &
2,000 N/A
70W-100W HID -30ºC
lumens
replacement
Bulkhead AB05 LED +55ºC

1 model - 150W 2,000
N/A
IECEx incandescent replacement lumens -55ºC
Many of our LED families also have local certifications for specific regional markets (China, Brazil, India, Russia, EAC, etc). Please contact your local Eaton
Crouse-Hinds series sales rep or Customer Service center for more information.

Find out which solution is right for you
Selection guide – Harsh/heavy & light industrial
Area Equivalent light Extreme Emergency DLC
classification Application Product output Lumen level ambients† battery option qualified
Champ®
Flood Pro PFMA 11 models - 70W to 3,300 - 50,500 +65ºC
1500W HID replacement lumens -40ºC
(select models)*
Champ
High/mid bay Pro PVML 9 models - 70W to 3,250 - 25,000 +65ºC
(select models)*
Champ
High/mid bay Pro PVMA 3 models - 150W to 5,800 - 10,400 +55ºC
(select models)*
PLE 4 models - 70W to +55ºC

Mid/low bay 3,000 - 8,000
175W HID replacement N/A
lumens -40ºC
Champ
Linear Pro PLLA 2 models - 2 lamp T5HO 4,000 - 8,000 +65ºC
(select models)*
Pauluhn ®
Harsh/heavy Linear APEX 3 models - up to 6 lamp 13,000 - 25,100 +55ºC

industrial T5HO replacement lumens -40ºC
(select models)*
Pauluhn
Linear FPS 2 models - 2 lamp T8 3,400 - 6,800 +50ºC
N/A
Linear
PLLE 4 models - 2x18W, +55ºC
3,000 - 8,000
2x36W and 2x58W N/A
lumens -40ºC
fluorescent replacement
CEAG
Linear 3 models - 2x18W, +55ºC
LLK15 2,100 -
2x36W and 2x58W N/A
4,100 lumens -40ºC
fluorescent replacement
Vaporgard 2 models - 100W to

Low bay Pro P2L/P3L 1,700 - 3,300 +55ºC
200W incandescent;
lumens -30ºC
50W-70W HID (select models)*
Champ Pro
Wallpack WPMV 3 models - 70W to 3,400 - +55ºC
175W HID replacement 6,800 lumens -40ºC (pending)*
Industrial 5 models - 250W-1500W

High bay high bay 16,000 - 67,000 +60ºC
HID & 4-10 Lamp T5HO
lumens -40ºC
replacement (select models)
Champ Pro PVM

High bay high bay 2 models - 1000W to 60,000 - 85,000 +65ºC
N/A
Light industrial
High bay IHBE high bay 4 models - 400W to 13,200 - 52,000 +45ºC
N/A
Flood PFME flood light 4 models - 400W to 15,400 - 79,000 +45ºC

N/A
Not all models are approved for all application categories. CROUSE-HINDS series LED lighting solutions 5
Hazardous Area Cl. I, Div. 2
Cl. II, Div. 1
Floodlights Zone 2/22
Ex-Gas Ex-Dust Adverse +65ºC -40ºC
Champ™ FMVA
LED floodlights A
PRIMARY APPLICATIONS
Indoor and outdoor area lighting in manufacturing
plants, heavy industrial chemical and petrochemical E
facilities, platforms, loading docks and parking lots.
LUMINAIRE MODELS
Model
number
Equivalent HID
luminaire
Typical energy
savings/lifetime F C
FMVA3L 70W B
FMVA5L 100W FMVA3L – 25L
FMVA7L 175W
FMVA9L 250W
Up to 78% D
FMVA11L 320W reduction in
energy costs and
FMVA13L 400W
150,000 hours of
FMVA15L 500W continuous
FMVA20L 600W-750W operation!
FMVA25L 750W-1000W FMVA40L – 50L

FMVA40L 1,500W+
FMVA50L 1,500W+
Up to 6 times longer life and 78% reduction
CERTIFICATIONS & COMPLIANCES in power consumption compared to
• Class I, Division 2, Groups A, B, C, D
equivalent HID floodlights
• Class I, Zone 2
• Class II, Division 1, Groups E, F, G;
Simultaneous Presence; Class III
• Type 4X, IP66
DESIGN FEATURES
• UL844; UL1598; UL1598A; UL8750 A Versatile design - Can be used for outdoor or indoor applications, and for
a wide range of mounting heights depending on model and light level
• CSA C22.2 No. 137 requirement.
• IECEx/ATEX Certified; Zone 2/22
• CE B Rugged heat sink - Designed to perform in high ambient temperatures up
to +65°C and as low as -40°C. The thick walls of the castings make for a
• DesignLights Consortium®
tough, rugged housing that keeps the internal driver and LED temperatures
approved for select models*
down.
ELECTRICAL RATINGS C High lumen output - Up to 120 lumens per watt.

• Voltages: 100-277 VAC/127-250 VDC, 347-480 VAC
D Full-frame yoke - Designed to utilize the SFA6 slipfitter and SWB6 wall
• Input power: 28W, 45W, 58W, 69W, 84W, 95W, mount bracket, making it ideal for retrofit or new installations (not available
113W, 177W, 217W, 340W, 400W for 40L & 50L).
OPTIONS AND ACCESSORIES E Multiple lens options - Tempered and clear glass standard, polycarbonate
and diffused glass options available.
• Bolt-on visor; bolt-on wire guard
• Floodlight slipfitter (not available for 40L & 50L) F Smaller and lighter - 25% smaller and 10 lbs (4.5 kg) lighter than previous
• Slipfitter wall mount adapter (not available for 40L model (3L-25L models).
& 50L)
• Diffused glass or polycarbonate lens
• Bull horn
• 3x3 optic (select models)
NEC CEC IEC/ATEX
† Operating temperature range may vary by lumen models within a product family. Refer to product
catalog pages for complete temperature range details.
Cl. II, Div. 1
High/Mid Bay Zone 2/21
Champ™ VMVL
LED luminaires
C
A
Locations requiring continuous and consistent light
levels in extreme ambient temperatures, such as
F manufacturing plants, heavy industrial or
petrochemical facilities, food and beverage facilities,
platforms, loading docks, tunnels, outdoor wall and
stanchion mounted general area lighting.
B Now available with an
integral battery back-up LUMINAIRE MODELS
for emergency lighting
Model Equivalent HID Typical energy
applications!
D number luminaire savings/lifetime
VMVL-3 70W
VMVL-5 100W
VMVL-7 175W
Up to 77%
E VMVL-9 250W reduction in
energy costs and
VMVL-11 320W
60,000 hours of
VMVL-3 – VMVL-13 VMVL-13 400W continuous
VMVL-17 400W-600W operation!
VMVL-17 – VMVL-25
VMVL-21 600W-750W
VMVL-25 750W-1000W
Custom Type I, III and V optics for better
output, zero maintenance and reduced CERTIFICATIONS & COMPLIANCES
energy consumption • Class I, Division 2, Groups A, B, C, D
• Class I, Zone 2 nA; Zone 21 tb
• Class II, Division 1, Groups E, F, G; Class III
DESIGN FEATURES • Simultaneous presence
• UL844; UL1598; UL1598A; UL8750; UL50;
A Modular design - This contractor-friendly design is ideal for both retrofit UL50E
and new construction applications.
• cUL Listed to CSA C22.2 No. 137
B Safe, reliable heat transfer - Die cast aluminum housing provides safe • NEMA Type 4X, IP66, Wet Locations
and effective heat transfer from the LED assembly to the outside • IECEx/ATEX Certified; Zone 2/21
environment, ensuring low LED junction temperature, reliability and
sustained lumen performance. • DesignLights Consortium®
C High efficiency drivers - Designed to provide reliable operation in even • CE
the harshest environments.
ELECTRICAL RATINGS
D Type 4X rated - The LED housing is constructed of durable die cast • Voltages: 100-277 VAC/127-250 VDC, 347-480 VAC
aluminum, providing an efficient thermal path to the heat sink assembly. • Input power: 28W, 45W, 61W, 76W, 92W, 95W,
The impact-resistant lens is sealed from the outside environment and 147W, 172W, 206W
provides ingress protection against water and dust.
OPTIONS AND ACCESSORIES
E Custom optics - Type I, III and V optics designed to maximize light • Integral back-up battery (90 minutes of
distribution and intensity. emergency lighting, VMVL-3 to VMVL-11 only)
• Quick Clip to simplify installation
F Lever-lock connectors and 3-pole terminal block.
• Diffused lens, Teflon coated lens, polycarbonate
lens and uplight refractor lens
• Wire guard
• Trunnion mount
NEC CEC IEC/ATEX • Cone top hat
† Operating temperature range may vary by lumen models within a product family. Refer to product • Type I, III and V optics
* Refer to www.designlights.org Qualified Products List under family models for full listing details. • Terminal block (TB6) 6-pole
Cl. II, Div. 1
Champ™ VMV LED

Connected fixtures
Indoor and outdoor area lighting in manufacturing
plants, heavy industrial chemical and petrochemical
facilities, platforms, loading docks and parking lots. D
LUMINAIRE MODELS
number luminaire savings/lifetime
E
VMV3L 70W-100W
VMV5L 100W-150W Up to 77% more A B
efficient than
VMV7L 150W-175W
standard LED light C
VMV9L 250W-320W fixtures!
VMV11L 320W-400W F
CERTIFICATIONS & COMPLIANCES

• cULus Class I, Division 2, Groups A, B, C, D
• cULus Class I, Zone 2, nA nR
• cULus Class II, Division 1, Groups E, F, G;
Simultaneous Presence; Class III
• cULus Zone 21 tb
• Type 4X, IP66, Wet Locations, Marine Listed Full lighting control at your fingertips,
• UL1598; UL1598A; UL8750; UL844; UL60079-0;
UL60079-11; UL60079-15; UL60730; UL913;
allowing you to maximize energy savings
UL50; UL50E and minimize maintenance costs
• NEC NFPA 70
• R/C for sensor and controller
• cUL Listed to CSA Standard C22.2 No. 250 (for
Luminaires)
DESIGN FEATURES
• cUL Listed to CSA Standard C22.2 No. 137
(Electric Luminaires for Hazardous Locations) A Integral sensor - Detects and measures area occupancy, lighting levels
and ambient temperatures. Up to 40 ft. sensor range provides excellent
• CSA 60079-11 coverage.
• CSA 60079-0
• CE (pending) B Occupancy sensing - Motion sensing to monitor occupancy of a site or
for control of infrequently used areas.
• ATEX/IECEx nA, nR, ia (pending)
• DLC (pending) C Daylight harvesting - Photo sensing measures ambient light levels and
adjusts light output accordingly, saving energy and extending fixture life.
ELECTRICAL RATINGS D Scheduled ON/OFF and dimming - Management of time scheduling to

• Voltages: 120-277 VAC; 108-250 VDC optimize energy usage installations.
• Input power: 29W, 41W, 54W, 74W, 89W
E Fixture grouping -Maximizes control in a defined area. By grouping light
fixtures, same control settings can be applied to them to increase
efficiency and response time.
• Pendant, cone pendant, ceiling, wall, and F Integral controller - Send commands to multiple fixtures to control
stanchion mounts lighting levels per predefined settings. Also communicates system
• Trunnion mount kit notifications/alarms on the fixture, sensor and radio.
• Safety cable
• Diffused lens; Teflon coated lens; polycarbonate
lens
• Terminal block (TB6) 6-pole
NEC CEC IEC/ATEX
Hazardous Area
Mid/Low Bay Zone 2/22
NLE LED
light fixtures
C PRIMARY APPLICATIONS
Certified for Zone 2 and Zone 22 hazardous areas.
Suitable for mid bay and low bay lighting
applications in chemical, petrochemical,
pharmaceutical, platforms, shipyards, loading docks,
wastewater treatment and paper mills.
A
LUMINAIRE MODELS
Model Equivalent Typical energy
number HID savings/lifetime
luminaire
NLE-3L 70W-100W
B
NLE-5L 100W-150W Up to 66%
reduction in
NLE-7L 150W-175W energy costs
NLE-8L 150W-175W

• Ex nR IIC T6/T5 Gc
Low profile and lightweight design, easy • Ex tb IIIC T80˚C/T100˚C Db
to install and reliable illumination in • Ex tD A21 IP66 T80˚C/T100˚C
Zone 2 and 22 areas • EN 55015:2013
• EN 61000-6-4:2007/A1:2011
• EN 61000-3-2:2006/A2:2009
• EN 61000-3-3:2013
DESIGN FEATURES • EN 61547:2009
• EN 61000-6-2:2005/AC:2005
A Rugged design - Highly durable aluminum housing with a tempered and
impact-resistant glass globe. NLE fixture has an operating temperature • IEC 61000-4-2 ed2.0(2008-12);IEC 61000-4-3
range of -40ºC to +55ºC. ed3.2 Consol.with am 1&2(2010-04)
• IEC 61000-4-4 ed3.0(2012-04);IEC 61000-4-5
B Lightweight and compact - Low profile and lightweight design is ideal for ed2.0 (2005-11);IEC 61000-4-6 ed4.0(2013-10)
compact installations. • IEC 61000-4-8 ed2.0(2009-09);IEC 61000-4-11
ed2.0 (2004-03)
C Ease of installation - U-shaped yoke mount provides mounting flexibility - • IP66
wall, ceiling, pole, etc.
ELECTRICAL RATINGS
• Voltages: 100-240 VAC; 108-250 VDC
• Input power: 30W, 50W, 70W, 80W

• Clear or diffused glass lens
• Warm white (3000K) and cool white (5700K)
color temperatures
IEC/ATEX
Cl. II, Div. 1
Emergency
Battery
Linear Zone 2
Champ™ MLLA linear

LED light fixtures
PRIMARY APPLICATIONS A
Oil and gas refineries, petrochemical facilities, food C
and beverage facilities, platforms, loading docks,
tunnels outdoor and stanchion mounted general B
area lighting, and where flammable vapors, gases,
ignitable dusts, fibers or flyings are present.
LUMINAIRE MODELS D
Equivalent
Model fluorescent Typical energy
Up to 67%
2 x 2 ft. T5/T8/
MLLA2 reduction in
T12HO
energy costs and
60,000 hours of
2 x 4 ft. T5/T8/
MLLA4 continuous
T12HO
operation!
E
• Class I, Zone 2
• Class II, Division 1, Groups E,F, G
• Class III Up to 67% more energy efficient than a
• UL844; UL1598; UL1598A; UL8750 T5HO fluorescent light and 8 times the
• CSA C22.2 No. 137 and 250 rated life
• Type 4X, IP66/67, Marine and Wet Locations
pending*
DESIGN FEATURES
ELECTRICAL RATINGS A Best-in-class efficacy - Up to 134 lumens per watt. (MLLA2 with UNV34 driver)
• Voltages: 120-277 VAC, 347-480 VAC, 127-250 VDC
• Input power: 31W, 54W B Custom optics - Standard wide beam spread for maximum illumination on
wall panels. Full cut-off beam spread option for targeted illumination;
avoids spillage and light loss.
C Built to last - Passed 2,000 psi high pressure hose test; passed 5G
• Available with a self-contained battery system for vibration test; 60,000 hour lifetime @ 55°C ambient.
emergency lighting applications
• Diffused glass or polycarbonate lens D Slim profile - 4.4" fixture height (excluding mounting brackets), perfect for
• Offset ceiling, offset ceiling swivel, flush, mounting in confined or low height areas.
pendant and pole mount options available
• Safety chain kit E Quick & easy installation - Easy access to drivers and wiring; no custom
brackets or hardware needed; Five mounting options available.
• Epoxy painted or natural aluminum finish
NEC CEC
Linear Cl. II, Div. 1
Pauluhn™ Summit LED

linear light fixtures
Replaces fluorescent T12, T8, and T5HO fixtures in
hazardous rated food processing, hose down and
corrosive environments.
The Summit LED was designed with food and
beverage processing facilities in mind. The fixture
housing is angled to mitigate debris build-up and
features a food-rated epoxy powder coat finish.
Plus, its robust design can withstand 1,500 PSI
hose pressure for wash down applications.
A
B LUMINAIRE MODELS
SUM13L 3 lamp T5HO Up to 50%

reduction in
energy costs and
SUM17L 4 lamp T5HO minimum 60,000
hours of
continuous
SUM25L 6 lamp T5HO operation!
NSF Splash Zone rated, 1500 PSI hose
down tested and an angled housing to
mitigate debris build-up
• Class II, Division 1, Groups F, G
DESIGN FEATURES • UL1598; UL8750, UL844

• CSA 22.2 No. 137
A Innovative and robust design - Angled light fixture mitigates debris
build-up. Withstands 1500 psi high pressure wash down, and food rated • NSF Splash Zone
paint maintains safety. • Type 4X; IP66
B High performance optics and drivers - 100+ lumens per watt provides
highly efficient lighting. Rated life is up to 60,000 hours of ELECTRICAL RATINGS
maintenance-free and safe operation.
• Voltages: 100-277 VAC/347-480 VAC, 127-250 VDC
C Easily customized for application-specific performance - Versatile • Input power: 122W, 144W, 217W
mounting options with a through feed design for simplified multiple
fixture wiring.
• Clear or diffused polycarbonate lens
• 0-10V dimming capabilities
• Surface/swivel mount, cable/chain mount and
threaded rod mount
• Available with cord assemblies and quick
disconnect receptacle
NEC CEC
Hazardous Area Emergency
Battery
Linear Zone 2/22 Ex-Gas Ex-Dust Adverse +55ºC
CEAG™ nLLK15 LED

Long-life LED tubes provide general illumination,
indoors or out, in Zone 2 and 22 hazardous A
environments around the globe. Heavy duty,
non-metallic construction stands up to tough
physical and environmental demands, making it an
excellent choice where dust, dirt, gas, vapor, smoke,
B
fumes, moisture, corrosive and wet conditions are
present. nLLK15 LED 600
C
LUMINAIRE MODELS
number fluorescent savings/lifetime
luminaire
nLLK15
2x18W
LED 600 Up to 77% more
nLLK15 efficient than
2x36W
LED 1200 standard LED light nLLK15 LED 1200 and 1500
nLLK15 fixtures!
2x58W
LED 1500

Crisp, bright light and durability in harsh
Marking accd. to 2014/34/EU: environments provides a long-life solution
• Ex II 3 G Ex ec IIC T4 Gc
• Ex II 3 D Ex tc IIIC T80°C Dc
in Zone 2 and 22 areas
• EC-Declaration of Conformity: CCH 15 ATEX 1044
• IP66
DESIGN FEATURES
ELECTRICAL RATINGS A Built to last - Heavy duty, non-metallic construction stands up to tough
• Voltage: 220-240 VAC/DC physical and environmental demands, making it an excellent choice where
• Input power: 18W, 37W, 49W dust, dirt, gas, vapor, smoke, fumes, moisture, corrosive and wet
conditions are present.
B High output - Utilizes Aura UltiLED LED tubes for extreme applications,
OPTIONS AND ACCESSORIES providing high efficacy and long life.
• Available with safety switch on request
• Self-contained battery version available C Emergency - Available with a self-contained battery system or V-CG-S
• Connection to CEAG emergency light monitoring module for monitoring with an Eaton central battery system.
systems possible (V-CG-S)
• Light controlling via DALI interface (DALI option)
IEC/ATEX
Emergency
Battery
Hazardous Area
Linear Zone 2/22
nHLL LED
A
Constructed with an aluminum housing and high
D impact-resistant polycarbonate cover for use in Zone
B 2 and 22 hazardous areas where moisture or
corrosion may be a problem, such as offshore oil
platforms, pharmaceutical and chemical plants, oil
refineries and industrial locations.
LUMINAIRE MODELS
NHLL-2-C2-3L 2x18W
Up to 39%
NHLL-2-C2-4L 2x36W reduction in
energy costs and
50,000 hours of
NHLL-4-C2-5L 2x36W
continuous
operation!
NHLL-4-C2-8L 2x58W
Rugged, low profile fixture that is easy to

install and provides clear illumination in
Zone 2 and 22 hazardous areas • Ex db ec IIC T5/T6 Gc
• Ex ec IIC T5/T6 Gc
• Ex db ec ib mb IIC T5/T6 Gc
• Ex ec ib mb IIC T5/T6 Gc
DESIGN FEATURES • Ex tb IIIC T80˚C Db
A Rugged design - Copper-free aluminum housing and impact-resistant • IECEx-certification of conformity: IECEx NEP
polycarbonate lens provide excellent resistance to corrosion and heat. 18.0003X
• EC-Type examination certificate: SEV 18 ATEX
B Easy installation - Lightweight design, hinged cover, and a terminal 0171X
block wing for easy installation and maintenance.
• IP66
C Industry-leading thermal management - For safe and reliable
operation over a wide temperature range.
ELECTRICAL RATINGS

D Retrofit friendly - Fixture utilizes the same mounting footprint of linear • Voltage: 100-240 VAC
fluorescent lighting.

• Epoxy coating on aluminum housing
• Emergency battery back-up
• Pipe, wall, and ceiling mounts available
IEC/ATEX
Cl. II, Div. 1
Low Bay / Targeted Zone 2/22
Ex-Gas Ex-Dust Adverse +50ºC
Vaporgard™ V2L/V3L
LED luminaires
Indoor or outdoor areas with low mounting heights
or confined spaces, such as tunnels and catwalks,
over doorways or entries, landing areas, utility B
rooms, etc.
LUMINAIRE MODEL
A
C
Up to 90%
V2LM2 reduction in
50W HID or
energy costs and
150-200W
50,000 hours of
V3LM2
incandescent
continuous D
operation!

• Class II, Division 1, Groups F, G
• UL844; UL1598; UL1598A
90% more energy-efficient than a 200
• CSA C22.2 No. 137
watt incandescent and over 20 times the
• NEMA 4X rated life
• IP66
• RoHS Compliant
• ATEX/IECEx Zone2/22
• DesignLights Consortium® DESIGN FEATURES
pending*
A Domeless reflector, low profile design - Designed for low mounting
heights and confined spaces where incandescent and HID based
luminaires are too large.
ELECTRICAL RATINGS
• Voltages: 120-277 VAC, 10-30 VDC B Installation and replacement made simple - Installed using the same
mounting modules as existing Crouse-Hinds series Vaporgard™ fixtures.
• Input power: 14W, 29W
C Safe, reliable heat transfer - Heat sink engineered to safely and
effectively remove heat from the LED and driver, ensuring long product life
OPTIONS AND ACCESSORIES and superior T-ratings.
• Clear or diffused glass lens, Telfon coated lens
• Color temperatures: warm white (3000K), cool D High power multi-die LED arrays - Provides instant on and full
(5000K) illumination in the harshest conditions, even when exposed to high,
repeated vibration.
• 110-30 VDC driver
NEC CEC IEC/ATEX

Emergency
Battery
Emergency & Exit Zone 1/21*
LED emergency and

exit lights
B N2LPS M2 Emergency Lighting
Used to provide reliable illumination for egress areas
E during failure or interruption of power to the normal
lighting system.
Our N2LPS M2 is
smaller, lighter and
more energy
LUMINAIRE MODEL
efficient than the Model
number Battery life
A previous model!
C N2LPSM2 90 minutes
D CERTIFICATIONS & COMPLIANCES

• Class I, Division 2, Groups B, C, D
• Class I, Zone 2
• UL844; UL924; UL1598A
• CSA C22.2 No. 141-M1985; C22.2 No. 137-M1981
G H • Life Safety Code NFPA101® - Section 5-9
F • NEMA 4X, Marine and Wet Locations
ELECTRICAL RATINGS
• Power supply input: 120-277 VAC; 6W max.
UX LED EX-LITE EXIT / EXIT 2
• LED heads: 12 VDC, 1W LED, 6W max.
LED egress, emergency and exit lighting LED Exit Signs

designed for harsh and hazardous PRIMARY APPLICATIONS
locations Used for marking escape routes and exits in
potentially explosive atmospheres.
N2LPS M2 DESIGN FEATURES LUMINAIRE MODELS

Model
Number Rating Battery
A Non-metallic, enclosed, gasketed housing - Provides corrosion
protection in the most extreme environments. Ex-Lite Hazardous Optional
B Durable and marine rated LED lamp head assemblies - Provide UX LED Industrial or Hazardous Optional
protection against water ingress, corrosion and impact.
EXIT / EXIT 2 Hazardous Optional
C Nickel cadmium battery - High temperature rated nickel cadmium
battery for reliable operation up to 55°C ambient.
D Reduced maintenance costs - Self-test, monitoring and diagnostics CERTIFICATIONS & COMPLIANCES
reduce costly maintenance checks. Ex-Lite:
E Remote mountable lamp heads - Lamp heads can be mounted • Class I, Division 2, Groups A, B, C, D
independently from the enclosure, allowing you to focus light where • Class I, Zone 1
you need it. • Class II, Division 2, Groups F, G (NEC)
• IP66
Exit Lighting DESIGN FEATURES • UL844; UL924; UL60079; UL1203
UX LED:
F Corrosion- and impact-resistant housing - Ensures long product life
and reliability. • Class I, Division 2, Groups A, B, C, D
• NEMA 4X, IP66, Outdoor Wet Locations
G Nickel cadmium battery - Premium heavy duty nickel cadmium battery • UL50; UL844; UL924; UL1598A
with 24-hour charge and recharge time increases safety by recovering
quickly from an outage. EXIT / EXIT 2
• Ex e ib mb IIC T6/T5 Gb; Ex tb IIIC T80°C Db
H Multiple "EXIT” legend options - EXIT inscriptions, pictograms, and • IECEx BVS 13.0017
directional arrows to meet customer preferences.
• EC-Type Examination Certificate: BVS 09 ATEX E
029
NEC CEC IEC/ATEX ELECTRICAL RATINGS

* Zone ratings vary by product family. Refer to individual catalog pages for complete certifications • Please refer to individual catalog pages
and compliances.
Cl. II, Div. 1
Wallpack Ex-Gas Ex-Dust Adverse +55ºC -40ºC
Champ™ CPMV LED

wallpack light fixtures
Provides a low profile solution for hazardous lighting
B D
applications. It’s the ideal choice for vertical surface
lighting where harsh and hazardous conditions
require high quality, reliable illumination. C
LUMINAIRE MODELS
CPMV3L 70W Up to 70% A

reduction in E
energy costs and
CPMV5L 100W
60,000 hours of
continuous
CPMV7L 150W-175W operation!

• Class II, Division 1, Groups E, F, G
• UL844; UL1598; UL1598A; UL8750
• CSA C22.2 No. 137
• NEMA 4X, IP66, Marine and Wet Locations
Low profile, long life and high
• DesignLights Consortium® performance in Class I, Division 2 and
pending* Class II, Division 1 areas.
ELECTRICAL RATINGS
• Voltages: 120-277 VAC, 347-480 VAC, 125/250 VDC
• Input power: 30W, 45W, 59W DESIGN FEATURES
A Built to last - Rated for 60,000+ hours of operation at 55ºC. Impact-
resistant lens sealed from the outside environment provides ingress
OPTIONS AND ACCESSORIES protection against water and dust.
• Available with a variety of lens types, including
clear glass, diffused glass, clear polycarbonate B High efficiency - Up to 116 lumens per watt.
and diffused polycarbonate
• Yoke mount and hub mount options are available C Rugged design - Engineered to perform in ambient temperatures from
-40°C to +55°C. Die cast aluminum LED housing provides efficient
• Available with a photocell
thermal path to heat sink assembly, and vertical fin design facilitates air
flow and dust shedding.
D Multiple optic and lens options - Narrow and wide optics for ideal light
output. Four lens styles provide flexibility for specific applications and
customer preferences.
E Simple installation - Contractor-friendly design is ideal for both retrofit

and new construction. Available with lever lock connectors.
NEC CEC
LED vs. conventional lighting technologies
Why are so many
facilities making
the switch to
Crouse-Hinds 77% 100% 75%
series LED?
The numbers say MAINTENANCE
AVERAGE REDUCTION 75% LOWER TOTAL
it all. IN ENERGY COSTS REDUCTION COST OF OWNERSHIP
Assumptions: Calculations based on overall life of the LED system. Energy cost of $.09 per kilowatt; 24 hour
per day operation; labor rate of $75 each for 2 workers; average time for fixture maintenance of 1 hour.

Hazardous Area Zone 1/21
Floodlights Ex-Gas Ex-Dust Adverse +55ºC -50ºC
CEAG™ PX LED
floodlights C
Ideal for ceiling and wall mounted general area
lighting where flammable vapors and gases are
present, along with harsh conditions including B
vibration, dust, moisture, corrosive atmospheres D
and extreme temperatures.
LUMINAIRE MODELS E
PXLED5L 100W-150W
Up to 70%
F
PXLED10L 175W-250W A
reduction in
PXLED15L 400W-500W energy costs and
PXLED20L 600W-750W 60,000 hours of
continuous
PXLED25L 750W-1000W
operation!
PXLED30L 1500W
CERTIFICATIONS & COMPLIANCES 60,000 hour rated life at 55°C ensures

Marking accd. to IECEx:
years of reliable performance in
• Ex db eb op is q IIC T4 Gb hazardous IEC applications
• Ex tb op is IIIC T100°C Db
Marking accd.to 2014/34/EU:
• Ex II 2 G Ex db eb op is q IIC T4 Gb
• Ex II 2 D Ex tb op is IIIC T100°C Db
• BVS 17 ATEX E 013 X
DESIGN FEATURES
• IECEx Certificate of conformity: IECEx BVS A Modular design - Provides six models with light output ranging from
17.0004 X 5,000 lumens up to 32,000 lumens.
• IP66/67
B High efficiency LEDs - Delivers up to 110 lm/W, reducing energy costs by
up to 70% over conventional lamps.
ELECTRICAL RATINGS C Easy installation and maintenance - Ex-e compartment provides quick
• Voltages: 110-277 VAC; 127-270 VDC access to the driver and terminals.
24-48 VDC available for PXLED 5L
• Input power: 49W, 98W, 147W, 196W, 245W, D Simple, flexible alignment - Stainless steel swivel bracket with adjustable
294W setting angle allows an easy alignment of the floodlight.
E Custom optics - Wide and narrow beam pattern options distribute light
OPTIONS AND ACCESSORIES where you need it most.
• Wide, narrow and asymmetric beam options

F Built to last - Designed for offshore and high vibration applications.
• Pole mounting
IEC/ATEX
Cl. II, Div. 1
Hazard-Gard™
B EVLLA LED luminaires
A
Used for general lighting in areas where flammable
or explosive vapors or gases are present, such as
petroleum refineries, chemical and petrochemical
plants, oil terminals, gas plants, drilling platforms
and wastewater treatment plants.
C LUMINAIRE MODELS
EVLLA5L 100W-150W
Up to 62%
D EVLLA7L 150W-175W reduction in
energy costs and
E EVLLA9L 175W-250W
60,000 hours of
EVLLA11L 250W-320W continuous
EVLLA13L 320W-400W operation!

• Class I, Division 1, Groups B, C, D
Energy-efficient and globally certified • Class II, Groups E, F, G
explosionproof workhorse for general area • Class III, Simultaneous Presence
and high bay lighting applications • UL844; UL1598; UL1598A
• CSA C22.2 No. 137
• NEMA 4X, IP66, Wet Locations
DESIGN FEATURES ELECTRICAL RATINGS

A Retrofittable to install base - Adapter available for connection to existing • Voltages: 120-277 VAC/108-250 VDC, 347-480 VAC
Hazard-Gard® EVI, EVLP and EVM modules.
B Quick-connect design - Install and wire the mounting module, then
simply screw in the luminaire.
C Factory sealed - No external sealing fittings required in Groups B, C and D. • Trunnion mount
• Guard
D 60,000 hours rated life - Eliminates the need for frequent lamp
• Color temperature: warm (3000K), cool (5000K)
replacement.
or neutral (4000K)
E Shock- and vibration-resistant - The LED housing is constructed of • Pendant, ceiling, stanchion and wall mounts
durable die cast aluminum, providing efficient long life. • Epoxy painted
NEC CEC IEC/ATEX

High/Mid Bay Ex-Gas Ex-Dust Adverse +55ºC -40ºC
HPLN LED light

fixtures
B
Suitable for Zone 1 and Zone 2 Ex-Gas and Zone
21/22 Ex-Dust hazardous areas, such as heavy D
industrial, chemical, petrochemical or
pharmaceutical facilities, platforms, shipyards, A
electric power, loading docks, wastewater treatment
plants and paper mills.
LUMINAIRE MODELS
number luminaire savings/
lifetime
HPLN-3L 70W-100W C
HPLN-5L 100W-150W
HPLN-7L 150W-175W
HPLN-9L 175W-250W Up to 60%
reduction in
HPLN-11L 250W-450W energy costs
E
HPLN-15L 400W
HPLN-21L 600W
HPLN-25L 600W-1000W A long-life, energy-efficient luminaire for
general area lighting in hazardous IEC
applications
Marking accd. to IECEx:
• Ex db eb mb op is IIC T4 Gb
• Ex tb op is IIIC T95˚C Db
DESIGN FEATURES
Marking accd. to 2014/34/EU:
• II 2 G Ex db eb mb op is IIC T4 Gb A Rugged design - Copper-free aluminum housing, tempered and impact-
• II 2 D Ex tb op is IIIC T95˚C Db resistant glass globe. Outstanding corrosion-proof capability (C5M-IEC,
UL1598A-UL) and anti-vibration design.
Certificate No.
• IECEx PRE 19.0058X
• Presafe 19 ATEX 09286X
B
Surge protection - 4kV protection as standard, but option up to 10kV
surge protection for offshore applications.
Permissible ambient temperature
• -40°C up to +55°C C Robust heat sink - Innovative heat sink facilitates air flow, ensuring long
Degree of protection accd. to EN60529 life in extreme environments.
• IP66
D
Installation flexibility - Stanchion, pendant, ceiling, wall and trunnion
mount options allow for easy installation in a variety of applications.
ELECTRICAL RATINGS
E Superior optical performance - Cool white 5700K & warm white 3000K
• Voltages: 100-240 VAC 50/60Hz; 120-250 VDC models available. Narrow (25˚) / medium (60˚) / wide (120˚) beam optics
available to distribute the light where it is needed the most.

• Cool white (5,700K) and warm white (3,000K) are
available
• Frosted lens reduces glare on critical processes
• Mounting: Pendant, ceiling, wall, stanchion,
trunnion
IEC/ATEX
Emergency
Battery
Mid Bay/Low Bay
HPL LED light

fixtures
Certified for Zone 1, 2, 21 and 22 hazardous areas.
Suitable for mid bay and low bay lighting
applications in chemical, petrochemical,
pharmaceutical, platforms, shipyards, loading docks,
wastewater treatment and paper mills.
A
LUMINAIRE MODELS
B HPL-3L 70W-100W
HPL-5L 100W-150W Up to 66%

reduction in
HPL-7L 150W-175W energy costs
HPL-8L 150W-175W

Energy-efficient and globally certified • Ex db e mb IIC T6 Gb
explosionproof workhorse for general area • Ex tb IIIC T80˚C Db IP66
and low/mid bay lighting applications • Ex tD A21 IP66 T80˚C
• IECEx-Certification of Conformity: IECEx CQM
15.0054X
• EC-Type Examination Certificate: EPT 16 ATEX
2405X
DESIGN FEATURES • GB Certificate: GYJ15.1157X
A Rugged design - Highly durable aluminum housing with a tempered and • IP66
impact-resistant glass globe. HPL fixture has an operating temperature
range of -40ºC to +50ºC.
ELECTRICAL RATINGS
B Lightweight and compact - Low profile and lightweight design is ideal for
compact installations. • Voltages: 100-247 VAC; 108-250 VDC
C Ease of installation - U-shaped yoke mount provides mounting flexibility -
color temperatures
• Emergency back-up battery available
IEC/ATEX
Hazardous Area Cl. I, Div. 1 Emergency
Battery
Linear Cl. II, Div. 1 Ex-Gas Ex-Dust Adverse +65ºC -40ºC
Hazard-Gard™ XPLA
linear LED luminaires
A C
Ideal for Class I, Division 1 and Class II, Division 1
areas in wastewater treatment, oil and gas refin-
eries, drilling rigs, petrochemical facilities, food and
beverage facilities, tunnels, outdoor wall and
stanchion mounted general area lighting, and where
B E
flammable vapors, gases, ignitable dusts, fibers or
flyings are present.
LUMINAIRE MODELS
Equivalent
D
Model fluorescent Typical energy
Up to 62%
2 x 2 ft. T5/T8/
XPLA2 reduction in
T12HO
energy costs and F
60,000 hours of
2 x 4 ft. T5/T8/
XPLA4 continuous XPLA with emergency battery
T12HO
operation!
CERTIFICATIONS & COMPLIANCES Up to 62% more energy-efficient than a

• Class I, Division 1, Groups C, D
T5HO fluorescent light and 8 times the
• Class III rated life
• UL50E; UL844; UL924; UL1598; UL1598A; UL8750
• CSA C22.2 No. 137, 250
• NEMA 4X, IP66, Marine and Wet Locations,
Paint spray rated DESIGN FEATURES
A High efficacy - Up to 139 lumens per watt.
ELECTRICAL RATINGS B Custom optics - Standard wide (120°) beam spread maximizes illumination
• Voltages: 120-277 VAC/127-300 VDC, 347-480 VAC on wall panels.
• Input power: 28.4W, 59.8W, 73.2W (EM model)
C Built to last - 2,000 psi high pressure hose down rated; passed 5G
vibration test; 60,000 hour lifetime @ 55°C ambient.
D Slim profile - Less than 5" fixture height (excluding mounting brackets),
• Glass or diffused glass lens perfect for mounting in confined or low height areas.
• Epoxy paint finish
• Flush, pole and swivel/surface mounts E Quick & easy installation - Easy access to drivers and wiring; no custom
brackets or hardware needed; two mounting options available.
• Polycarbonate paint spray lens shield kit
• Safety chain kit
F Emergency battery back-up - 90-minute minimum run time at 700
lumens in emergency mode.
NEC CEC
Ex-Gas Adverse +55ºC -40ºC
Linear
CEAG™ ExLin LED

A
Approved for use in Zone 1 and 2 hazardous areas,
ExLin provides longer life, improved efficiency and
B ExLin 3L-1 and 5L-1
superior performance with a competitive payback
versus fluorescent fixtures. Designed to provide
general illumination where moisture, dust, corrosion
and extreme temperature exist.
E D
LUMINAIRE MODELS
F Model Equivalent Typical energy
fluorescent
C ExLin 7L-2 and 10L-1
ExLin 3L-1 2x18W
ExLin 5L-1 2x36W Up to 40%

ExLin NE+ reduction in
(available in 3L or 5L) energy costs and a
ExLin 5L-2 2x36W
rated life of
100,000 hours at
ExLin 7L-2 2x58W 25ºC
ExLin 10L-2 2x58W

State-of-the-art LED technology with
optimized thermal management and a CERTIFICATIONS & COMPLIANCES
time-tested, field-proven enclosure Marking accd. to IECEx:
• Ex eb ib op is q IIC T4 Gb
• Ex tb op is IIIC T80/110°C Db
Marking accd. to 2014/34/EU:
DESIGN FEATURES • Ex II 2G Ex eb ib op is q IIC T4/T5 Gb
A Superior performance and efficiency - Up to 120 lm/W provides up to • Ex II 2D Ex tb op is IIIC T80/110°C Db
40% energy efficiency compared to traditional fluorescent fixtures. • IECEx-Certification of Conformity:
IECEx BVS 18.0028X
B Built to last - Rated life of 100,000 hours at 25ºC based on L90C5
• EC-Type Examination Certificate:
provides long-term, low-maintenance operation.
BVS 18 ATEX E 037 X
• IP66/67

C Optimized light distribution - Standard, narrow and wide beam optics
optimize light distribution, providing light where the customer needs it with
the potential to reduce the number of fixtures required.
ELECTRICAL RATINGS
D Low profile and lightweight - Decreases footprint in confined • Voltage: 110-277 VAC/DC
applications and reduces installation effort while still providing IK10.

E Drop-in mounting capability to eLLK fluorescent - Same fixing point as
eLLK 2x18W fixtures and a mounting kit is available, allowing for easy
replacement of 2x36W and 2x58W without changing cables. OPTIONS AND ACCESSORIES
• Clear or diffused lens

F Optimized for offshore applications - Designed to reduce water
• Standard, narrow, and wide beam options
condensation for high humidity environments and increase reliability in
corrosive environments. • Pole adapter
• Available with V-CG-S emergency lighting
technology, allowing the fixtures to be connected
to CEAG's central emergency lighting system or
decentralized solution as ExLinNE+ with highly
efficient LiFePO4 battery for 1.5h or 3,h
IEC/ATEX emergency duration without memory effect.
Battery
CEAG™ eLLK LED

PRIMARY APPLICATIONS D
Designed for use in outdoor and indoor hazardous
and non-hazardous areas where moisture or
platforms, pharmaceutical plants, oil refineries and
industrial locations.
LUMINAIRE MODELS B
Typical
Model Equivalent
energy
savings/
C
number luminaire Battery lifetime
eLLK LED 2x18W

No Up to 20%
400A fluorescent
reduction in
eLLK LED 2x36W
800A fluorescent
No energy costs
and 60,000
eLLK LED 2x18W
Yes hours of A
400A NE fluorescent
continuous
eLLK LED 2x36W operation!
Yes
800A NE fluorescent
Saves on energy consumption and easily

CERTIFICATIONS & COMPLIANCES retrofit existing luminaires in hazardous
• II 2G Ex de mb IIC T4 Gb and corrosive environments
• II 2D Ex tb IIIC T80 °C Db IP66
• BVS 09 ATEX E 034
• Ex de mb IIC T4 Gb/Ex tb IIIC T80 °C
• IECEx BVS 09.0033 DESIGN FEATURES
A High output - Illuminance (lux/Fc) equivalent to related fluorescent tubes
at measurement plane.
ELECTRICAL RATINGS
• Voltages: 110-254 VAC, 110-250 VDC; 50/60 Hz B Non-metallic design - Fiberglass-reinforced polyester construction for
• Input power: 2x13W, 2x26W extreme durability.
C Retrofit friendly - Retrofits to existing eLLK/nLLK fixtures with existing

OPTIONS AND ACCESSORIES EVG 09 ballast or as a complete unit.
• LED module 400A (2x13W) for eLLK/M 92 018/18
D Emergency - eLLK NE models include a 7 Ah-NC battery with LED display
• LED module 800A (2x26W) for eLLK/M 92 and monitoring via microprocessor. Provides 1.5 or 3 hours of emergency
036/36 lighting.
• Self-contained battery system (NE models)
• Available with V-CG-S module for monitoring with
an Eaton central battery system
IEC/ATEX
Emergency
Battery
Linear
HLL LED
A
Constructed with an aluminum housing and high
impact-resistant polycarbonate cover, providing
D extreme durability and reliability in Zone 1, 2, 21 and
B 22 hazardous areas. Designed for use in hazardous
areas where moisture or corrosion may be a
problem, such as offshore oil platforms,
pharmaceutical and chemical plants, oil refineries
and industrial locations.
LUMINAIRE MODELS
Up to 39%
HLL-2-3L 2x18W
reduction in
energy costs and
50,000 hours of
continuous
HLL-4-5L 2x36W
operation!

install and provides clear illumination in CERTIFICATIONS & COMPLIANCES
Zone 1, 2, 21 and 22 hazardous areas • Ex db ec IIC T5/T6 Gc
• Ex ec IIC T5/T6 Gc
• Ex db ec ib mb IIC T5/T6 Gc
• Ex ec ib mb IIC T5/T6 Gc
DESIGN FEATURES • Ex tb IIIC T80˚C Db
• IECEx-certification of conformity:
A Rugged design - Copper-free aluminum housing and impact-resistant
IECEx CQM 16.0030X
polycarbonate lens provide excellent resistance to corrosion and heat.
• EC-Type examination certificate:
B Easy installation - Lightweight design, hinged cover, and a terminal CML 17ATEX3305X
block wing for easy installation and maintenance. • IP66
C Industry-leading thermal management - For safe and reliable

operation over a wide temperature range. ELECTRICAL RATINGS
• Voltages: 100-240 VAC, 108-250 VDC

D Retrofit friendly - Fixture utilizes the same mounting footprint of linear
fluorescent lighting. • Input power: 40W, 80W

IEC/ATEX
Hazardous Area Zone
1/2/21/22
Emergency
Battery
Linear Ex-Gas Ex-Dust Adverse +55ºC -40ºC
HRL LED recessed

Engineered to provide maintenance-free illumination
in the most demanding environments, along with a
competitive payback vs. fluorescent fixtures.
Available in three common sizes, the HRL is
A
certified for use in Zones 1, 21, 2, and 22 hazardous
areas, as well as Class I, Division 2 locations.
LUMINAIRE MODELS
Typical
energy
Model Equivalent savings/
number luminaire Battery lifetime
B
D
2x18W
HRL3060 Yes
fluorescent Up to 20% C
reduction in
energy costs
2x36W
HRL3012
fluorescent
Yes and 55,000
hours of
continuous
4x18W operation!
HRL6060 Yes
fluorescent
Maintenance-free illumination in the most

demanding environments
• IP66
• Ex de mb IIC T6 Gb, Ex tb IIIC T80°C Db
DESIGN FEATURES
ELECTRICAL RATINGS A High output - 3 models from 3000 to 6,000 lumens with up to 110Lm/W.
• Voltages: 110-240 VAC, 108-250 VDC; 50/60 Hz
• Input power: 28W, 54W B Rugged design - Painted steel or optional stainless steel construction for
extreme performance in extreme environments.
OPTIONS AND ACCESSORIES C Retrofit friendly - Recessed mounting in existing T-bar ceiling systems.
• 90 and 180 minute battery back up options

D Emergency - Battery back-up function provides 1.5 or 3 hours of
• Galvanized or stainless steel enclosure emergency lighting.
• Safety switch
• Single or thu-feed wiring
• Painted sheet steel or stainless steel housing
IEC/ATEX
Emergency
Battery
Linear
RLF LED
A PRIMARY APPLICATIONS
RLF LED linear recessed ceiling fixtures provide
extreme durability and reliability in Zone 1, 2, 21 and
22 hazardous areas. the RLF is designed for use in
hazardous areas such as Paint shops and spray
cabinents, pharmaceutical and chemical plants.
LUMINAIRE MODELS
D Model
number
Equivalent
luminaire
Typical energy
savings/lifetime
C
B RFL LED A 600 2L 2x18W
Up to 39%
reduction in
RFL LED A 600 5L 2x36W
energy costs and
50,000 hours of
RFL LED A 1200 5L 2x36W
continuous
operation!
RFL LED A 1200 10L 2X58W
Explosion-protected, recessed ceiling CERTIFICATIONS & COMPLIANCES

lighting engineered for Zone 1, 2, 21 and 22 • II 2G Ex eb mb op is IIC T4 Gb
hazardous areas. • II 2D Ex tb op is IIIC T80 °C Db
• EU-Type examination certificate:
FTZU 17 ATEX 0002X
• IP66
DESIGN FEATURES
A Rugged design - Painted sheet steel or optional stainless steel ELECTRICAL RATINGS
housing for easy cleanup and safety glass lens. • Voltages: 110-254 VAC, 220-250 VDC
B Easy installation - Installs flush, ideal for paint shops and spray booths.
C Maximum flexibility - 3,000 to 13,000 lumen range over four models OPTIONS AND ACCESSORIES
and two fixture sizes.
• Painted sheet steel or optional stainless
Safety - Self contained battery unit with 1.5 to 3 hours of runtime steel housing
D
optional. (battery range based upon select models) • Emergency battery back-up
IEC/ATEX
Battery
VLL linear LED

Designed for use in outdoor and indoor hazardous
and non-hazardous areas where moisture or
platforms, pharmaceutical plants, oil refineries and
industrial locations. B
A
LUMINAIRE MODELS

C
2x18W
VLL-3L Up to 20%
fluorescent
reduction in D
2x36W energy costs and
VLL-5L
fluorescent 60,000 hours of
continuous
2x54W
VLL-7L
fluorescent operation!

Marking accd.to IECEx
• Ex eb mb IIC T5 Gb or Ex db eb mb IIC T5 Gb /
Ex db eb ib mb IIC T5Gb (EM)* Saves on energy consumption and easily
• Ex tb IIIC T80˚C Db
retrofit existing luminaires in hazardous
Marking accd.to ATEX
and corrosive environments
• II2 G Ex eb mb IIC T5 Gb
• II2 G Ex db eb mb IIC T5 Gb
• II2 G Ex db eb ib mb IIC T5 Gb(EM)
• II2 D Ex tb IIIC T80˚C D
DESIGN FEATURES
A High output - 3 models from 3000 to 7,000 lumens.
ELECTRICAL RATINGS
• Voltages: 100-240 VAC, 105-250 VDC; 50/60 Hz B Non-metallic design - Fiberglass-reinforced polyester construction for
extreme durability.
• Input power: 30W, 55W, 65W
C Retrofit friendly - Optional sliding rail mount system to easily adjust to
previous mounting position.
• 5700K cold white, optional 3000K warm, 4000K D Emergency - Battery back-up function provides 1.5 or 3 hours of
neutral or 5000K cool white emergency lighting.
• Self-contained battery system
• Self monitoring battery indicator system
• Diffused polycarbonate lens standard
IEC/ATEX
Low Bay/Targeted
AB05 LED
marine wallpack
B Perfect for confined or restricted spaces, such as
stairwells, storage areas and corridors that require
consistent light.
LUMINAIRE MODELS
C A Model
number
Equivalent
luminaire
Typical energy
savings/lifetime
Up to 80%
reduction in
energy costs and
AB05 150W incandescent
60,000 hours of
continuous
operation!

• Zone 1, 2, 21, 22
Up to 6 times longer life and 65% reduction • Ex d IIB T6
in power consumption compared to • Ex II 2 G Ex d IIB T6/T5 Gb

• Ex II 2 D Ex tb IIIC T80°C/T100°C Db
equivalent HID floodlights • Certificate BVS 09 ATEX E 014 X
• IP66

A Shock- and vibration-resistant - Durable vibration-resistant LEDs • Voltage: 230 VAC
decrease maintenance costs. • Input power: 23W
B Lightweight enclosure - Robust light alloy enclosure weighs only 7.0 kg,
allowing the user to mount in areas where the available space is restricted,
and making installation fast and easy.
C Instant illumination and restrike - Decreases facility downtime; no

warm-up time required.
IEC/ATEX
Cl. II, Div. 1
Low Bay/Targeted Zone 1
Hazard-Gard™ EV LED
light fixtures A
Indoors or outdoors in process and storage areas,
corridors, bridges and stairs.
LUMINAIRE MODELS

100W-200W
Up to 85%
EVLEDC201 reduction in
incandescent
energy costs and
50,000 hours of
EVLEDC701 70W-100W HID continuous
operation! B

• Class I, Division 1, Groups C, D
• Class I, Zone 1 & 2, Group IIB
• Class III; Simultaneous Presence
• UL844; UL1598; UL1598A
Up to 85% reduction in energy costs and
• CSA C22.2 No. 137
50,000 hours of continuous operation
• Type 4X, IP66
ELECTRICAL RATINGS
• Voltages: 100-277 VAC, 12-24 VDC
DESIGN FEATURES
• Input power: 15W, 30W A Retrofittable mounting modules - Compatible with existing EV Series
mounting modules, which reduces retrofit installation time and materials
costs, and makes new construction installation easy.
OPTIONS AND ACCESSORIES B 20 times longer life than incandescents in tough-to-maintain
• Amber color for wildlife-friendly applications Division 1 locations.
• Color temperature: cool white (3000K) and warm
white (5600K)
• 12-24 VDC
NEC CEC IEC/ATEX

Harsh & heavy industrial
Adverse +55ºC -40ºC
Wallpack
Champ™ Pro WPMV LED

wallpack light fixtures
D PRIMARY APPLICATIONS
B Provides a low profile solution for industrial lighting
applications. It’s the ideal choice for vertical surface
C lighting where harsh conditions require high quality,
reliable illumination.
LUMINAIRE MODELS
A Model Equivalent HID Typical energy
E
WPMV3L 70W Up to 70%
reduction in
energy costs and
WPMV5L 100W
60,000 hours of
continuous
WPMV7L 150W-175W operation!

• UL1598; UL1598A; UL8750
• CSA C22.2 No. 250
Industry-leading performance and • NEMA 4X, IP66, Marine and Wet Locations
reliability for outdoor area and site • DesignLights Consortium®
lighting in industrial locations pending*
ELECTRICAL RATINGS
• Voltages: 120-277 VAC/125/250 VDC, 347-480 VAC
DESIGN FEATURES • Input power: 30W, 45W, 59W
A Built to last - Rated for 60,000+ hours of operation at 55ºC. Impact-
resistant lens sealed from the outside environment provides ingress
protection against water and dust.
B High efficiency - Up to 116 lumens per watt. • Available with a variety of lens types, including
clear glass, diffused glass, clear polycarbonate
and diffused polycarbonate
C Rugged design - Engineered to perform in ambient temperatures from
-40°C to +55°C. Die cast aluminum LED housing provides efficient • Yoke mount and hub mount options are available
thermal path to heat sink assembly, and vertical fin design facilitates air • Available with a photocell
flow and dust shedding.
D Multiple optic and lens options - Narrow and wide optics for ideal light
output. Four lens styles provide flexibility for specific applications and
customer preferences.
E Simple installation - Contractor-friendly design is ideal for both retrofit

and new construction. Available with lever lock connectors.
NEC CEC
Floodlights Adverse +65ºC -40ºC
Champ™ Pro PFMA

LED floodlights A
Indoor and outdoor area lighting in manufacturing E
plants, mine sites and processing areas, platforms,
loading docks and parking areas.
LUMINAIRE MODELS F C
Model
number
Equivalent HID
luminaire
Typical energy
savings/lifetime
B
PFMA3L 70W PFMA3L – 25L
PFMA5L 100W
PFMA7L 175W D
PFMA9L 250W
Up to 78%
PFMA11L 320W reduction in
energy costs and
PFMA13L 400W
150,000 hours of
PFMA15L 500W continuous
operation! PFMA40L – 50L
PFMA20L 600W-750W
PFMA25L 750W-1000W
PFMA40L 1,500W+
Up to 6 times longer life and 78% reduction
PFMA50L 1,500W+
in power consumption compared to
equivalent HID floodlights
• UL1598; UL1598A; UL8750
• cUL
• Type 4X DESIGN FEATURES
• IP66
A Versatile design - Can be used for outdoor or indoor applications, and for
• DesignLights Consortium® a wide range of mounting heights depending on model and light level
approved for select models* requirement.
• UL approved up to 65°C ambient (3L-15L)
• cUL Listed to CSA Standard CSA C22.2 No. 250 B Rugged heat sink - Designed to perform in high ambient temperatures up
to +65°C and as low as -40°C. The thick walls of the castings make for a
• IEC Standards: IEC 60598; CE
tough, rugged housing that keeps the internal driver and LED temperatures
down.
ELECTRICAL RATINGS
C High lumen output - Up to 120 lumens per watt.
• Input power: 26W, 40W, 55W, 67W, 82W, 93W, D Full-frame yoke - Designed to utilize the SFA6 slipfitter and SWB6 wall
108W, 177W, 217W, 340W, 400W mount bracket, making it ideal for retrofit or new installations (not available
on 40L & 50L).
E Multiple lens options - Tempered and clear glass standard, polycarbonate
• Bolt-on visor and bolt-on wire guard and diffused glass options available.
• Floodlight slipfitter (not available on 40L & 50L)
• Slipfitter wall mount adapter (not available on F Smaller and lighter - 25% smaller and 10 lbs (4.5 kg) lighter than previous
40L & 50L) model (3L-25L models).
• Polycarbonate lens
• Diffused glass lens
• Bull horn NEC CEC IEC/CE
• 3x3 optic (select models) † Operating temperature range may vary by lumen models within a product family. Refer to product
High/Mid Bay
Champ™ Pro PVML

LED light fixtures
C
A
Locations requiring continuous and consistent light
levels in extreme ambient temperatures, such as
manufacturing plants, mine sites, heavy industrial or
petrochemical facilities, food and beverage facilities,
F marine environments, platforms, loading docks,
tunnels, outdoor wall and stanchion mounted
Now available with an general area lighting.
B integral battery back-up
for emergency lighting
applications! LUMINAIRE MODELS
D PVML-3 70W
PVML-5 100W
PVML-7 175W
Up to 77%
E
PVML-9 250W reduction in
energy costs and
PVML-11 320W
60,000 hours of
PVML-3 – PVML-13 PVML-13 400W continuous
PVML-17 – PVML-25
PVML-17 400W-600W operation!
Custom Type I, III and V optics for better PVML-21 600W-750W
output, zero maintenance and reduced PVML-25 750W-1,000W
energy consumption
• UL1598; UL1598A
• cUL
DESIGN FEATURES • Type 4X, IP66, Wet Locations

A Modular design - This contractor-friendly design is ideal for both retrofit approved for select models*
and new construction applications.
• cUL Listed to CSA Standard CSA C22.2 No. 250
B Safe, reliable heat transfer - Die cast aluminum housing provides safe • IEC standard: CE
and effective heat transfer from the LED assembly to the outside • UL approved up to 65°C ambient (3L-11L UNV1;
environment, ensuring low LED junction temperature, reliability and all other models 55°C)
sustained lumen performance.
ELECTRICAL RATINGS
C High efficiency drivers - Designed to provide reliable operation in even
the harshest environments. • Voltages: 100-277 VAC/127-250 VDC, 347-480 VAC
• Input power: 28W, 45W, 61W, 76W, 92W, 95W,
D Type 4X rated - The LED housing is constructed of durable die cast 147W, 172W, 206W
aluminum, providing an efficient thermal path to the heat sink assembly.
The impact-resistant lens is sealed from the outside environment and OPTIONS AND ACCESSORIES
provides ingress protection against water and dust.
• Integral back-up battery (90 minutes of
emergency lighting, PVML-3 to PVML-11 only)
E Custom optics - Type I, III and V optics designed to maximize light
distribution and intensity. • Quick Clip to simplify installation
• Diffused lens, Teflon coated lens, polycarbonate
F Lever-lock connectors and 3-pole terminal block. lens and uplight refractor lens
• Wire guard
• Trunnion mount
• Cone top hat
NEC CEC
• Type I, III and V optics
catalog pages for complete temperature range details. • Occupancy sensor and remote
High/Mid Bay Adverse +55ºC -40ºC
Champ™ Pro PVMA

LED light fixtures
C
Ideal for a variety of non-hazardous medium or
heavy duty applications such as mining, marine,
food processing, pulp and paper, wastewater
treatment, power generation, and general industrial A
manufacturing areas.
LUMINAIRE MODELS
PVMA5L 150W Up to 77%

reduction in
energy costs and
PVMA7.5L 175W
60,000 hours of
continuous B
PVMA10L 250W operation!

• UL1598; UL1598A
• CSA C22.2 No. 250 Smaller footprint, lightweight design,
• IP66, Wet Locations and maintenance-free illumination in
• RoHS demanding environments
• IEC Standards: IEC 60598; CE
DESIGN FEATURES
ELECTRICAL RATINGS A Rugged design - Engineered for durability in complex environments.
• Input power: 48W, 64W, 77W B High efficiency - Up to 122 lm/W and custom optics to maximize light on
the work plane.
C Ease of installation - Compact footprint with ceiling, pendant, wall or

OPTIONS AND ACCESSORIES stanchion mount options and the ability to retrofit Crouse-Hinds
• Ceiling, pendant, cone pendant, wall, and series installed base.
trunnion mounts
• Safety cable
• Quick Clip
• Clear or diffused glass, clear or diffused
polycarbonate and uplight refractor lenses
NEC CEC
Emergency
Battery
Mid/Low Bay
PLE LED
light fixtures
C
Ideal for a variety of non-hazardous medium or
heavy duty applications such as mining, platforms,
loading docks, tunnels, and general industrial
manufacturing areas.
A
LUMINAIRE MODELS
number HID savings/lifetime
luminaire
PLE-3L 70W-100W
B
PLE-5L 100W-150W Up to 66%
reduction in
PLE-7L 150W-175W energy costs
PLE-8L 150W-175W

• IEC Standard: CE
• IP66
Low profile and lightweight design, easy
to install and reliable illumination in
demanding environments ELECTRICAL RATINGS
• Voltages: 100-240 VAC; 108-250 VDC
DESIGN FEATURES OPTIONS AND ACCESSORIES

A Rugged design - Highly durable aluminum housing with a tempered and • Emergency battery
impact-resistant glass globe. PLE fixture has an operating temperature
range of -40ºC to +55ºC.
B Lightweight and compact - Low profile and lightweight design is ideal for color temperatures
compact installations.
C Ease of installation - U-shaped yoke mount provides mounting flexibility -

IEC/CE
Harsh & heavy industrial Emergency
Battery
Linear Adverse +65ºC -40ºC
Champ™ Pro PLLA LED

A
Ideal for a variety of non-hazardous applications
such as mining, food processing, marine, waste-
water treatment, heavy manufacturing and general
wash down areas.
C
B
LUMINAIRE MODELS
Model
Equivalent
fluorescent Typical energy E
Up to 67%
2 x 2 ft. T5/T8/
PLLA2 reduction in
T12HO
energy costs and
60,000 hours of D
2 x 4 ft. T5/T8/
PLLA4 continuous
T12HO
operation!

• UL1598; UL1598A; ULL8750; UL924
• CSA C22.2 No. 250
• Type 4X, IP66/67, Marine and Wet Locations
Up to 67% more energy efficient than a
T5HO fluorescent light and 8 times the
(pending) rated life
ELECTRICAL RATINGS
• Input power: 30.3W, 58.9W
DESIGN FEATURES
A Best-in-class efficacy - Up to 134 lumens per watt.
OPTIONS AND ACCESSORIES B Custom optics - Standard wide (120°) and narrow (80°) beam pattern for a
wide variety of general and targeted lighting applications.
• Available with a self-contained battery system for
emergency lighting applications
C Built to last - 2,000 psi high pressure hose down rated; high vibration
• Clear or diffuse polycarbonate lens resistant; 60,000 hour lifetime @ 55°C ambient.
• Flush/back, ceiling/swivel, wall, offset ceiling/wall,
pole and pendant mounts D Slim profile - 4.4" fixture height (excluding mounting brackets), perfect for
• Safety chain kit mounting in confined or low height areas.
• Epoxy painted or natural aluminum finish
E Quick & easy installation - Easy access to drivers and wiring; no custom
• Emergency back-up battery option (coming soon) brackets or hardware needed; five mounting options available.
• Surge protection module
NEC CEC
Linear
Pauluhn™ Apex LED

Replaces fluorescent T12, T8, and T5HO fixtures in
hose down, corrosive and heavy industrial
environments.
The Apex LED was designed with food and
beverage processing facilities in mind. The fixture
housing is angled to mitigate debris build-up and
features a food rated epoxy powder coat finish.
Plus, its robust design can withstand 1,500 psi hose
pressure for wash down applications.
A
B LUMINAIRE MODELS
APX13L 3 lamp T5HO Up to 50%

reduction in
energy costs and
APX17L 4 lamp T5HO minimum 60,000
hours of
continuous
APX25L 6 lamp T5HO operation!
NSF Splash Zone rated, 1500 PSI hose
down tested and an angled housing to
mitigate debris build-up
• UL1598; UL8750
• CSA 22.2 No. 250
DESIGN FEATURES • NSF Splash Zone

• Type 4X; IP66
A Innovative and robust design - Angled light fixture mitigates debris
build-up. Withstands 1500 psi high pressure wash down, and food rated
paint maintains safety.
ELECTRICAL RATINGS
B High performance optics and drivers - 100+ lumens per watt provides • Voltages: 120-277 VAC/127-250 VDC, 347-480 VAC
highly efficient lighting. Rated life is up to 60,000 hours of maintenance- • Input power: 122W, 144W, 217W
free and safe operation.
C Easily customized for application-specific performance - Versatile

mounting options with a through feed design for simplified multiple OPTIONS AND ACCESSORIES
fixture wiring. • Clear or diffused polycarbonate lens
• Optional 0-10V dimming capabilities
• Surface/swivel mount, cable/chain mount and
threaded rod mount
• Available with cord assemblies and quick
disconnect receptacle
NEC CEC
Battery
Linear Adverse +50ºC
Pauluhn™ FPS LED

A
A low/mid bay linear LED fixture for industrial and
marine locations. The FPS is available with a
non-metallic housing and is Type 4X / IP66 rated for B
moisture protection in hose down and marine
applications.
LUMINAIRE MODELS
Equivalent
Model
number
fluorescent
luminaire
Typical energy
savings/lifetime E
Up to 63%
D
FPS2L 2x2 ft. T8 reduction in
energy costs and
60,000 hours of
FPS4L 2x4 ft. T8 continuous
operation!
C
CERTIFICATIONS & COMPLIANCES A non-metallic, corrosion-resistant LED

• UL1598; UL1598A; UL924 fixture designed for hose down and
• CSA C22.2 No. 250 marine applications
• Type 4X
• IP66
• NSF Splash Zone
DESIGN FEATURES
ELECTRICAL RATINGS A Built to last - Non-metallic housing and stainless steel mounts and latches
provide excellent resistance to corrosion.
• Voltage: 120-277 VAC
• Input power: 27W, 37W (EM model), 78W
B Low-glare design - Diffused lens minimizes glare in low mounting height
applications.
OPTIONS AND ACCESSORIES C

Color LED options - Available with red or blue LEDs for naval or
• Red and blue color LEDs for naval applications emergency applications.

D Installation-friendly - Versatile options for terminal blocks and through
• Surface and pole mounts feed.

E Emergency - Available with a self-contained battery system for emergency
power loss applications.
NEC CEC
Emergency
Battery
Linear
PLLE LED
A
C Constructed with an aluminum housing and high
D impact-resistant polycarbonate cover for use in
outdoor and indoor industrial areas where moisture
or corrosion may be a problem, such as offshore oil
B platforms, pharmaceutical and chemical plants, oil
refineries and industrial locations.
LUMINAIRE MODELS

PLLE-2-C2-3L 2x18W
Up to 39%
reduction in
PLLE-2-C2-4L 2x36W
energy costs and
50,000 hours of
PLLE-4-C2-5L 2x36W
continuous
operation!
PLLE-4-C2-8L 2x58W

install and provides clear illumination in
challenging areas • CE self declared
• IP66

A Rugged design - Copper-free aluminum housing and impact-resistant
polycarbonate lens provide excellent resistance to corrosion and heat. • Input power: 30W, 40W, 60W, 80W
B Easy installation - Lightweight design, hinged cover, and a terminal

block wing for easy installation and maintenance. OPTIONS AND ACCESSORIES
C Industry-leading thermal management - For safe and reliable • Emergency battery back-up
operation over a wide temperature range.

D Retrofit friendly - Fixture utilizes the same mounting footprint of linear
fluorescent lighting.
IEC/CE
Battery
Linear Adverse +55ºC -40ºC
CEAG™ LLK15 LED

Crisp, bright light and durability in wet and harsh
environments. Wide ambient temperature range
from -40º to +55ºC. Heavy duty, non-metallic
construction stands up to dust, dirt, gas, vapor, A
smoke, fumes, moisture, corrosive and wet C
conditions.
B
LUMINAIRE MODELS LLK15 LED 600
C
Model
number
Equivalent
fluorescent Typical energy
savings/lifetime
D
luminaire
LLK15 LED
2x18W
600 Up to 60% more
LLK15 LED efficient than
2x36W
1200 fluorescent light
LLK15 LED fixtures
2x58W
1500
LLK15 LED 1200 and 1500

• IP66 A rugged and durable LED fixture
• Operating temperature range -40ºC to +55ºC designed for reliable performance in
extreme ambient temperatures
ELECTRICAL RATINGS
• Input power: 18W, 37W, 49W
DESIGN FEATURES
OPTIONS AND ACCESSORIES A Built to last - Heavy duty, non-metallic construction stands up to tough
physical and environmental demands, making it an excellent choice where
• Available with safety switch on request dust, dirt, gas, vapor, smoke, fumes, moisture, corrosive and wet
• Wall mount brackets, ceiling mount brackets and conditions are present.
pipe clamps
• Available with battery B High output - Utilizes long-life LED tubes for extreme applications,
providing high efficacy and long life.
• Available with V-CG-S module for monitoring with
an Eaton central battery system

C Extreme temperatures - Rated for use in ambient temperatures from
• Available with DALI -40ºC to +55ºC
D Emergency - Available with a self-contained battery system or V-CG-S

module for monitoring with an Eaton central battery system.
Adverse +55ºC
Low Bay/Targeted
Vaporgard™ Pro P2L/P3L

LED light fixtures
Indoor or outdoor areas with low mounting heights
or confined spaces, such as tunnels and catwalks,
over doorways or entries, landing areas, utility
rooms, etc.
B
LUMINAIRE MODELS
Equivalent
A Model
number HID Typical energy
savings/lifetime
C luminaire
Up to 90%
P2LM2 reduction in
50W HID or
energy costs and
150-200W
D incandescent
50,000 hours of
P3LM2 continuous
operation!

• UL1598
• UL1598A Marine
90% more energy-efficient than a 200 • cUL Listed to CSA Standard CSA C22.2 No. 250
watt incandescent and over 20 times the • Type 4X, IP66, Wet Locations
rated life • DesignLights Consortium®
ELECTRICAL RATINGS
DESIGN FEATURES • Voltages: 120-277 VAC, 10-30 VDC
A Domeless reflector, low profile design - Designed for low mounting • Input power: 14W, 29W
heights and confined spaces where incandescent and HID based
luminaires are too large.
B Installation and replacement made simple - Installed using the same OPTIONS AND ACCESSORIES
mounting modules as existing Eaton's Crouse-Hinds Vaporgard fixtures. • Diffused glass or polycarbonate lens
• Teflon coated lens
C Safe, reliable heat transfer - Heat sink engineered to safely and
• Warm white (3000K), neutral (4000K) and cool
effectively remove heat from the LED and driver, ensuring long product life
white (5000K) color temperatures
and superior T-ratings.
• 10-30 VDC driver
D High power multi-die LED arrays - Provides instant on and full • Wall, ceiling, pendant and stanchion mounts
illumination in the harshest conditions, even when exposed to high,
repeated vibration.
NEC CEC
Light industrial
High Bay Adverse +65ºC -40ºC
Champ™ Pro PVM

high bay LED
A durable, high lumen solution for industrial areas
with mounting heights from 60 to 100+ feet. B
Common applications include production facilities,
clean rooms, packaging facilities and warehouses. C
A
LUMINAIRE MODELS
D
Up to 65%
PVM60L 1000W reduction in
energy costs and
60,000 hours of
PVM85L 1500W continuous
operation!

• cULus wet locations
• NEMA 4X, IP66
Delivers up to 85,000 lumens for industrial
• RoHS compliant
areas with mounting heights from 60 to
approved for select models* 100+ feet.
ELECTRICAL RATINGS
• Voltages: 120-240 VAC, 277-480 VAC
DESIGN FEATURES
A Best-in-class efficacy - Up to 132 lumens per watt.
OPTIONS AND ACCESSORIES B Built to last - Constructed of heavy duty, die cast aluminum with a 3G
vibration rating and an operating temperature range of -40ºC to +65ºC
• Two CCT colors: 4000K and 5000K at 85 CRI (60,000 lumen model) and -40ºC to +50ºC (85,000 lumen model).
• Medium, narrow, wide and extra wide optics
• Control options include standard fixed output or C Custom optics - Narrow, medium, wide and extra wide distribution
optional 0-10V dimming options ensures superior performance to key areas within an application.
• Universal mounting allows for suspended, pipe or
hook mount. Optional surface mount bracket D Dimming capabilities - Control options include standard fixed output or
available optional 0-10V dimming.
• Available with cord assemblies and plugs
NEC CEC
Light industrial
High Bay
Industrial High Bay

LED light fixtures
IHB LED luminaires are the perfect replacement for
250W-1,500W HID and 4-10 lamp T5HO fluorescent
high bay fixtures. Designed for locations requiring
continuous and consistent light levels, requiring
frequent on-and-off of lights and that are difficult to
relamp or that cause production to be stopped
B during the lamp maintenance process.
LUMINAIRE MODELS

E IHB16L
250-500W HID or
4 lamp T5HO
A
IHB24L
400-750W HID or Up to 72%
D 4-6 lamp T5HO reduction in
500-1000W HID or energy costs and
IHB32L
6-8 lamp T5HO 60,000 hours of
750-1,500W HID or continuous
IHB48L
8-10 lamp T5HO operation!
1,000-1,500W HID or
IHB64L
Perfect replacement for 250-1500 watt HID 10 lamp T5HO
or 4-10 lamp T5HO fixtures

• UL1598; UL8750
• cULus
DESIGN FEATURES • Damp locations
A Increased efficiency - Up to 117 lumens per watt. • DesignLights Consortium®
approved for select models
B Multiple mounting options - Available with pendant, aircraft cable or jack
chain mounting.
ELECTRICAL RATINGS
C Aluminum heat sinks for superior thermal management. • Voltages: 100-277 VAC/127-250 VDC, 347-480 VAC
D Multiple lens options - Tempered and clear glass standard, diffused glass
and clear or diffused polycarbonate options available.
E Optional occupancy sensor kit available.

• Occupancy sensor kits
• Diffused or clear lens (glass or polycarbonate)
• Lens guard
• Open ended and closed dust cover kits
• Dimmable driver
• Wide or aisle optic
• Pendant, aircraft cable or jack chain mounting
NEC CEC
EATON'S
CROUSE-HINDS
CROUSE-HINDS
series LED lighting solutions 43
Light industrial
High Bay Adverse +45ºC -30ºC
IHBE high bay LED

IHBE LED fixtures are the perfect replacement for
250W to 1,500W+ HID and 2-10 lamp T8, T12 and
T5HO fluorescent high bay fixtures .
LUMINAIRE MODELS
D
IHBE-13L 400-600W
Up to 77% B
reduction in
IHBE-20L 600-750W
energy costs and
60,000 hours of A
IHBE-30L 750-1000W
continuous
operation!
IHBE-50L 1500-2000W
C

• UL1598
• IP65
• CSA C22.2 No. 250
• RoHS 3 4 models from 13,000 to 52,000 lumens
and up to 77% energy savings.
ELECTRICAL RATINGS
• Voltages: 120-277 VAC, 347-480 VAC, 127-400 VDC
• Input power: 100W, 150W, 237W, 395W
DESIGN FEATURES
OPTIONS AND ACCESSORIES A Energy efficient - Up to 133 lumens per watt.
• Warm white (3000K), neutral white (4000k) or
cool white (5700K) color temperatures B Built to last - Constructed of heavy duty, die cast aluminum with
polycarbonate lens and optics.
• Narrow and wide beam optics available
• Occupancy sensor with remote control C Custom optics - narrow and wide beam options ensure superior
• Hanging mount or trunnion mount performance to key areas within an application.
• Available with cord assemblies and plugs
D Easy installation & maintenance - Serviceable drivers and cord option
provide fast installation and maintenance.
NEC CEC
Light industrial
Flood
PFME LED floodlights

PFME LED floodlights are the perfect replacement
for HID flood and area lighting in indoor and outdoor
light industrial areas.

A number luminaire savings/lifetime
PFME15L 500W
Up to 72%
reduction in
PFME30L 750-1000W
energy costs and
50,000 hours of
PFME60L 1500+W
continuous
operation!
PFME75L 1500+W
D
B
E
LUMINAIRE MODELS
C

• UL1598
• Wet Location, IP65
• CSA C22.2 No. 250
4 models from 15,000 to 79,000 lumens

ELECTRICAL RATINGS
• Voltages: 120-277 VAC, 127-400 VDC, 277-480 VAC
• Input power: 120.2W, 242.2W, 484.5W, 603.5W
DESIGN FEATURES OPTIONS AND ACCESSORIES

A Increased efficiency - Up to 130 lumens per watt. • Photocell
• Wire guards and visor kits
B Multiple mounting options - Standard trunnion mount and optional pole
mount available. • Narrow and standard optics options
• Replaceable driver kits
C Aluminum heat sinks for superior thermal management.
D Multiple color temperature options - 3000K warm, 4000K neutral and

5000K cool white options available.
NEC CEC
EATON'S
CROUSE-HINDS
CROUSE-HINDS
CROUSE-HINDS
series
series
LED lighting
LED lighting
solutions
solutions 45
U.S. (Global Headquarters): Canada Eaton Middle East Korea
Eaton's Crouse-Hinds Division Toll Free: 800-265-0502 9714-8066100 82 2 6380 4032
FAX: (800) 263-9504 FAX: 9714-8894813 82-2-6380-4070
1201 Wolf Street FAX Orders only: (866) 653-0645 [email protected] [email protected]
Syracuse, NY 13208
(866) 764-5454
FAX: (315) 477-5179
Orders Only:
[email protected] Mexico/Latin America/Caribbean Singapore Australia
[email protected] 52-555-804-4000 65-6825-1668 1300-332-866
FAX: 52-555-804-4020 FAX: 65-6645-9811 FAX: 61-2-9693-5127
[email protected] [email protected] [email protected]
For more information:
If further assistance is
required, please contact
Europe (Germany) China India
an authorized Eaton
Distributor, Sales Office, 49 (0) 6271 806-500 86-21-2899-3600 91-124-4683888
49 (0) 6271 806-476 FAX: 86-21-2899-4055 FAX: 91-124-4683899
or Customer Service
[email protected] [email protected] [email protected]
Department.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Crouse-Hinds Division
1201 Wolf Street
Syracuse, NY 13208
Crouse-Hinds.com
© 2022 Eaton
All Rights Reserved Eaton is a registered trademark.
Printed in USA
Publication No. 5100-1122 All other trademarks are property
November 2022 of their respective owners.

Crouse Hinds Led Family Brochure

Uploaded by

Copyright:

Available Formats

Crouse Hinds Led Family Brochure

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Crouse Hinds Led Family Brochure

Uploaded by

Copyright:

Available Formats

Global LED lighting portfolio

Safe. Reliable. Efficient.

Why LED? Why Crouse-Hinds series LED?

2 CROUSE-HINDS series LED lighting solutions

Mid/low bay NLE 3,000 - +55ºC

Class I, Division 2, Linear Pauluhn™ 13,000 - +55ºC

Linear nHLL 4 models - 2x18W, 3,000 - +55ºC

CROUSE-HINDS series LED lighting solutions 3

High/mid bay HPLN 3,400 - +55ºC

Mid/low bay HPL 3,000 - +50ºC

Linear CEAG Ex-Lin 4 models - 2x18W, 2,750 - +55ºC

Linear HLL 2 models - 2x18W and 2,800 - +55ºC

Linear RLF LED 3 models - 2x18W, 3,100 - +60ºC

Linear VLL LED 3 models - 2x18W, +55ºC

Hazard-Gard™ 2 models - 100W to

Bulkhead AB05 LED +55ºC

4 CROUSE-HINDS series LED lighting solutions

PLE 4 models - 70W to +55ºC

Harsh/heavy Linear APEX 3 models - up to 6 lamp 13,000 - 25,100 +55ºC

Vaporgard 2 models - 100W to

Industrial 5 models - 250W-1500W

Champ Pro PVM

Flood PFME flood light 4 models - 400W to 15,400 - 79,000 +45ºC

FMVA25L 750W-1000W FMVA40L – 50L

ELECTRICAL RATINGS C High lumen output - Up to 120 lumens per watt.

Champ™ VMV LED

CERTIFICATIONS & COMPLIANCES

ELECTRICAL RATINGS D Scheduled ON/OFF and dimming - Management of time scheduling to

CERTIFICATIONS & COMPLIANCES

OPTIONS AND ACCESSORIES

Champ™ MLLA linear

Pauluhn™ Summit LED

SUM13L 3 lamp T5HO Up to 50%

DESIGN FEATURES • UL1598; UL8750, UL844

CEAG™ nLLK15 LED

CERTIFICATIONS & COMPLIANCES

Rugged, low profile fixture that is easy to

OPTIONS AND ACCESSORIES

CERTIFICATIONS & COMPLIANCES

NEC CEC IEC/ATEX

LED emergency and

D CERTIFICATIONS & COMPLIANCES

LED egress, emergency and exit lighting LED Exit Signs

N2LPS M2 DESIGN FEATURES LUMINAIRE MODELS

NEC CEC IEC/ATEX ELECTRICAL RATINGS

Champ™ CPMV LED

CPMV3L 70W Up to 70% A

CERTIFICATIONS & COMPLIANCES

E Simple installation - Contractor-friendly design is ideal for both retrofit

CROUSE-HINDS series LED lighting solutions 17

CERTIFICATIONS & COMPLIANCES 60,000 hour rated life at 55°C ensures

• Wide, narrow and asymmetric beam options

CERTIFICATIONS & COMPLIANCES

DESIGN FEATURES ELECTRICAL RATINGS

NEC CEC IEC/ATEX

HPLN LED light

OPTIONS AND ACCESSORIES

HPL LED light

HPL-5L 100W-150W Up to 66%