Computer Mouse

Mice first broke onto the public stage with the introduction of the Apple Macintosh in
1984, and since then they have helped to completely redefine the way we use computers.

Every day of your computing life, you reach out for your mouse whenever you want to
move your cursor or activate something. Your mouse senses your motion and your clicks
and sends them to the computer so it can respond appropriately.

Evolution

It is amazing how simple and effective a mouse is, and it is also amazing how long it took
mice to become a part of everyday life. Given that people naturally point at things --
usually before they speak -- it is surprising that it took so long for a good pointing device
to develop. Although originally conceived in the 1960s, a couple of decades passed
before mice became mainstream.

In the beginning, there was no need to point because computers used crude interfaces like
teletype machines or punch cards for data entry. The early text terminals did nothing
more than emulate a teletype (using the screen to replace paper), so it was many years
(well into the 1960s and early 1970s) before arrow keys were found on most terminals.
Full screen editors were the first things to take real advantage of the cursor keys, and they
offered humans the first way to point.

Light pens were used on a variety of machines as a pointing device for many years, and
graphics tablets, joy sticks and various other devices were also popular in the 1970s.
None of these really took off as the pointing device of choice, however.

When the mouse hit the scene -- attached to the Mac, it was an immediate success. There
is something about it that is completely natural. Compared to a graphics tablet, mice are
extremely inexpensive and they take up very little desk space. In the PC world, mice took
longer to gain ground, mainly because of a lack of support in the operating system. Once
Windows 3.1 made Graphical User Interfaces (GUIs) a standard, the mouse became the
PC-human interface of choice very quickly.

Inside a Mouse

The main goal of any mouse is to translate the motion of your hand into signals that the
computer can use. Let's take a look inside a track-ball mouse to see how it works:
 The guts of a mouse
1. A ball inside the mouse touches the desktop and rolls when the mouse moves.

The underside of the mouse's logic board: The

exposed portion of the ball touches the desktop.
2. Two rollers inside the mouse touch the ball. One of the rollers is oriented so that
it detects motion in the X direction, and the other is oriented 90 degrees to the
first roller so it detects motion in the Y direction. When the ball rotates, one or
both of these rollers rotate as well. The following image shows the two white
rollers on this mouse:
 The rollers that touch the ball and detect X and Y
motion
3. The rollers each connect to a shaft, and the shaft spins a disk with holes in it.
When a roller rolls, its shaft and disk spin. The following image shows the disk:

A typical optical encoding disk: This disk has 36

holes around its outer edge.
4. On either side of the disk there is an infrared LED and an infrared sensor. The
holes in the disk break the beam of light coming from the LED so that the infrared
sensor sees pulses of light. The rate of the pulsing is directly related to the speed
of the mouse and the distance it travels.
 A close-up of one of the optical encoders that track
mouse motion: There is an infrared LED (clear) on
one side of the disk and an infrared sensor (red) on
the other.
5. An on-board processor chip reads the pulses from the infrared sensors and turns
them into binary data that the computer can understand. The chip sends the binary
data to the computer through the mouse's cord.
6.

The logic section of a mouse is

dominated by an encoder chip, a
small processor that reads the
pulses coming from the infrared
 sensors and turns them into bytes
sent to the computer. You can also
see the two buttons that detect
clicks (on either side of the wire
connector).

In this optomechanical arrangement, the disk moves mechanically, and an optical system
counts pulses of light. On this mouse, the ball is 21 mm in diameter. The roller is 7 mm in
diameter. The encoding disk has 36 holes. So if the mouse moves 25.4 mm (1 inch), the
encoder chip detects 41 pulses of light.

You might have noticed that each encoder disk has two infrared LEDs and two infrared
sensors, one on each side of the disk (so there are four LED/sensor pairs inside a mouse).
This arrangement allows the processor to detect the disk's direction of rotation. There is
a piece of plastic with a small, precisely located hole that sits between the encoder disk
and each infrared sensor. It is visible in this photo:

A close-up of one of the optical encoders that track

mouse motion: Note the piece of plastic between
the infrared sensor (red) and the encoding disk.

This piece of plastic provides a window through which the infrared sensor can "see." The
window on one side of the disk is located slightly higher than it is on the other -- one-half
the height of one of the holes in the encoder disk, to be exact. That difference causes the
two infrared sensors to see pulses of light at slightly different times. There are times
when one of the sensors will see a pulse of light when the other does not, and vice versa.
Data Interface

Most mice on the market today use a USB connector to

attach to your computer. USB is a standard way to
connect all kinds of peripherals to your computer,
including printers, digital cameras, keyboards and mice.
See How USB Ports Work for more information about
this technology.

Some older mice, many of which are still in use today, have a PS/2 type connector, as
shown here:

A typical PS/2 connector.

Instead of a PS/2 connector, a few other older mice use a serial type of connector to
attach to a computer.

Types of mouse

1. Optical Mice

Developed by Agilent Technologies and introduced to the world in late 1999, the optical
mouse actually uses a tiny camera to take thousands of pictures every second.

Able to work on almost any surface without a mouse pad, most optical mice use a small,
red light-emitting diode (LED) that bounces light off that surface onto a complimentary
metal-oxide semiconductor (CMOS) sensor. In addition to LEDs, a recent innovation are
laser-based optical mice that detect more surface details compared to LED technology.
This results in the ability to use a laser-based optical mouse on even more surfaces than
an LED mouse.
Here's how the sensor and other parts of an optical mouse work together:

 The CMOS sensor sends each image to a digital signal processor (DSP) for
analysis.
 The DSP detects patterns in the images and examines how the patterns have
moved since the previous image.
 Based on the change in patterns over a sequence of images, the DSP determines
how far the mouse has moved and sends the corresponding coordinates to the
computer.
 The computer moves the cursor on the screen based on the coordinates received
from the mouse. This happens hundreds of times each second, making the cursor
appear to move very smoothly.

In this photo, you can see the sensor on the bottom of

the mouse.

Optical mice have several benefits over track-ball mice:

 No moving parts means less wear and a lower chance of failure.

 There's no way for dirt to get inside the mouse and interfere with the tracking
sensors.
 Increased tracking resolution means a smoother response.
 They don't require a special surface, such as a mouse pad.
 Apple has transformed its optical mouse into a modern
work of art.
Back to the Drawing Board
Another type of optical mouse has been around for
over a decade. The original optical-mouse technology
bounced a focused beam of light off a highly-reflective
mouse pad onto a sensor. The mouse pad had a grid
of dark lines. Each time the mouse was moved, the
beam of light was interrupted by the grid. Whenever the
light was interrupted, the sensor sent a signal to the
computer and the cursor moved a corresponding
amount.

This kind of optical mouse was difficult to use, requiring

that you hold it at precisely the right angle to ensure
that the light beam and sensor aligned. Also, damage
to or loss of the mouse pad rendered the mouse
useless until a replacement pad was purchased.
Today's optical mice are far more user-friendly and
reliable.

Accuracy

A number of factors affect the accuracy of an optical mouse. One of the most important
aspects is resolution. The resolution is the number of pixels per inch that the optical
sensor and focusing lens "see" when you move the mouse. Resolution is expressed as
dots per inch (dpi). The higher the resolution, the more sensitive the mouse is and the less
you need to move it to obtain a response.

Most mice have a resolution of 400 or 800 dpi. However, mice designed for playing
electronic games can offer as much as 1600 dpi resolution. Some gaming mice also allow
you to decrease the dpi on the fly to make the mouse less sensitive in situations when you
need to make smaller, slower movements.

Historically, corded mice have been more responsive than wireless mice. This fact is
changing, however, with the advent of improvements in wireless technologies and optical
sensors. Other factors that affect quality include:

 Size of the optical sensor -- larger is generally better, assuming the other mouse
components can handle the larger size. Sizes range from 16 x 16 pixels to 30 x 30
pixels.
 Refresh rate -- it is how often the sensor samples images as you move the mouse.
Faster is generally better, assuming the other mouse components can process
them. Rates range from 1500 to 6000 samples per second.
 Image processing rate -- is a combination of the size of the optical sensor and
the refresh rate. Again, faster is better and rates range from 0.486 to 5.8
megapixels per second.
 Maximum speed -- is the maximum speed that you can move the mouse and
obtain accurate tracking. Faster is better and rates range from 16 to 40 inches per
second.

2. Wireless Mice

Most wireless mice use radio frequency (RF) technology to communicate information to
your computer. Being radio-based, RF devices require two main components: a
transmitter and a receiver. Here's how it works:
 The transmitter is housed in the mouse. It sends an electromagnetic (radio) signal
that encodes the information about the mouse's movements and the buttons you
click.
 The receiver, which is connected to your computer, accepts the signal, decodes it
and passes it on to the mouse driver software and your computer's operating
system.
 The receiver can be a separate device that plugs into your computer, a special card
that you place in an expansion slot, or a built-in component.
 Photo courtesy Logitech
MX900 and docking station

Many electronic devices use radio frequencies to communicate. Examples include

cellular phones, wireless networks, and garage door openers. To communicate without
conflicts, different types of devices have been assigned different frequencies. Newer cell
phones use a frequency of 900 megahertz, garage door openers operate at a frequency of
40 megahertz, and 802.11b/g wireless networks operate at 2.4 gigahertz. Megahertz
(MHz) means "one million cycles per second," so "900 megahertz" means that there are
900 million electromagnetic waves per second. Gigahertz (GHz) means "one billion
cycles per second." To learn more about RF and frequencies, see How the Radio
Spectrum Works.

Benefits
Unlike infrared technology, which is commonly used for short-range wireless
communications such as television remote controls, RF devices do not need a clear line
of sight between the transmitter (mouse) and receiver. Just like other types of devices that
use radio waves to communicate, a wireless mouse signal can pass through barriers such
as a desk or your monitor.

RF technology provides a number of additional benefits for wireless mice. These include:

 RF transmitters require low power and can run on batteries

 RF components are inexpensive
 RF components are light weight

As with most mice on the market today, wireless mice use optical sensor technology
rather than the earlier track-ball system. Optical technology improves accuracy and lets
you use the wireless mouse on almost any surface -- an important feature when you're not
tied to your computer by a cord.

Pairing and Security

In order for the transmitter in the mouse to communicate with its receiver, they must be
paired. This means that both devices are operating at the same frequency on the same
channel using a common identification code. A channel is simply a specific frequency
and code. The purpose of pairing is to filter out interference from other sources and RF
devices.

Pairing methods vary, depending on the mouse manufacturer. Some devices come pre-
paired. Others use methods such as a pairing sequence that occurs automatically, when
you push specific buttons, or when you turn a dial on the receiver and/or mouse.

To protect the information your mouse transmits to the receiver, most wireless mice
include an encryption scheme to encode data into an unreadable format. Some devices
also use a frequency hopping method, which causes the mouse and receiver to
automatically change frequencies using a predetermined pattern. This provides additional
protection from interference and eavesdropping.

3. Bluetooth Mice

One of the RF technologies that wireless mice commonly use is Bluetooth. Bluetooth
technology wirelessly connects peripherals such as printers, headsets, keyboards and
mice to Bluetooth-enabled devices such as computers and personal digital assistants
(PDAs). Because a Bluetooth receiver can accommodate multiple Bluetooth peripherals
at one time, Bluetooth is also known as a personal area network (PAN). Bluetooth
devices have a range of about 33 feet (10 meters).

Bluetooth operates in the 2.4 GHz range using RF technology. It avoids interference
among multiple Bluetooth peripherals through a technique called spread-spectrum
frequency hopping. WiFi devices such as 802.11b/g wireless networks also operate in the
2.4 GHz range, as do some cordless telephonescordless telephones and microwave ovens.
Version 1.2 of Bluetooth provides adaptive frequency hopping (AFH), which is an
enhanced frequency-hopping technology designed to avoid interference with other 2.4
GHz communications.

Why is it called Bluetooth?

Harald Bluetooth was king of Denmark in the late 900s.
He managed to unite Denmark and part of Norway into
a single kingdom then introduced Christianity into
Denmark. He left a large monument, the Jelling rune
stone, in memory of his parents. He was killed in 986
during a battle with his son, Svend Forkbeard.
Choosing this name for the standard indicates how
important companies from the Baltic region (nations
 including Denmark, Sweden, Norway and Finland) are
to the communications industry, even if it says little
about the way the technology works.

4. RF Mice

The other common type of wireless mouse is an RF device that operates at 27 MHz and
has a range of about 6 feet (2 meters). More recently, 2.4 GHz RF mice have hit the
market with the advantage of a longer range -- about 33 feet (10 meters) and faster
transmissions with less interference. Multiple RF mice in one room can result in cross-
talk, which means that the receiver inadvertently picks up the transmissions from the
wrong mouse. Pairing and multiple channels help to avoid this problem.

Typically, the RF receiver plugs into a USB port and does not accept any peripherals
other than the mouse (and perhaps a keyboard, if sold with the mouse). Some portable
models designed for use with notebook computers come with a compact receiver that can
be stored in a slot inside the mouse when not in use.

Mouse Tip
If you want to use both a wireless RF mouse and
keyboard, buy them together. Pairing and transmission
technology is unique to each manufacturer and device.
If you purchase an RF wireless keyboard and mouse
separately, you may have to connect a receiver for
each one to your PC.

5. Mouse Innovations

As with many computer-related devices, mice are being combined with other gadgets and
technologies to create improved and multipurpose
Working Together
devices. Examples include multi-media mice,
Some PC keyboards and
combination mice/remote controls, gaming mice,
mice are designed to work
biometric mice, tilting wheel mice and motion-based
together to give you more
mice. To learn more about innovations in mouse
options for input. For
technology, let's start with multi-media mice and
example, the Logitech
combination mice/remote controls.
Cordless Desktop LX700
a. Multi-Media Mouse and Combination Mouse/Remote
comes with a keyboard
These types of mice are used with multimedia systems
that has scroll, pan and
such as the Windows XP Media Center Edition
zoom capabilities. The
computers. Some combine features of a mouse with
mouse includes the same
additional buttons (such as play, pause, forward, back and
features, so that you can
volume) for controlling media. Others resemble a
use either to perform these
television/media player remote control with added
functions.
features for mousing. Remote controls generally use
infrared sensors but some use a combination of infrared and RF technology for greater
range.

b.Gaming Mice
Gaming mice are high-precision, optical mice designed for use with PCs and game
controllers. Features may include:

 Multiple buttons for added flexibility and functions such as adjusting dpi rates on
the fly
 Wireless connectivity and an optical sensor
 Motion feedback and two-way communication

c. Motion-Based Mice
Yet another innovation in mouse technology is motion-based control. With this feature,
you control the mouse pointer by waving the mouse in the air.

The technology patented by one manufacturer, Gyration, incorporates miniature

gyroscopes to track the motion of the mouse as you wave it in the air. It uses an
electromagnetic transducer and sensors to detect rotation in two axes at the same time.
The mouse operates on the principle of the Coriolis Effect, which is the apparent turning
of an object that's moving in relation to another rotating object. The device and
accompanying software converts the mouse movements into movements on the
computer's screen. The mice also include an optical sensor for use on a desktop.

6. Biometric Mice

Biometric mice add security to your computer system by permitting only authorized users
to control the mouse and access the computer. Protection is accomplished with an
integrated fingerprint reader either in the receiver or the mouse. This feature enhances
security and adds convenience because you can use your fingerprint rather than
passwords for a secure login.
 Photo courtesy Microsoft Corporation
The Wireless IntelliMouse Explorer with Fingerprint
Reader is a biometric mouse.

To use the biometric feature, a software program that comes with the mouse registers
fingerprints and stores information about corresponding authorized users. Some software
programs also let you encrypt and decrypt files.

7. Tilting Scroll Wheel

A recent innovation in mouse scrolling is a tilting scroll wheel that allows you to scroll
onscreen both horizontally (left/right) and vertically (up/down). The ability to scroll both
ways is handy when you are viewing wide documents like a Web page or spreadsheet.

To navigate both horizontally and vertically, the scroll wheel is positioned on a

combination fulcrum and lever. This is the design used by the Logitech Cordless Click!
Plus mouse.
 Photo courtesy Logitech
Logitech Cordless Click! Plus

Another method for vertical and horizontal scrolling is a touch scroll panel that responds
to your finger sliding horizontally and vertically, as employed by the Logitech V500
Cordless Notebook Mouse.

Photo courtesy Logitech

Logitech V500 Cordless Notebook Mouse