M.Tech - CA AY 2019 2020

SCHOOL OF ELECTRICAL ENGINEERING
M. Tech Control and Automation

(M.Tech C&A)
Curriculum
(2019-2020 admitted students)
VISION STATEMENT OF VELLORE INSTITUTE OF TECHNOLOGY
Transforming life through excellence in education and research.
MISSION STATEMENT OF VELLORE INSTITUTE OF

TECHNOLOGY
World class Education: Excellence in education, grounded in ethics and

critical thinking, for improvement of life.
Cutting edge Research: An innovation ecosystem to extend knowledge and
solve critical problems.
Impactful People: Happy, accountable, caring and effective workforce and
students.
Rewarding Co-creations: Active collaboration with national & international
industries & universities for productivity and economic development.
Service to Society: Service to the region and world through knowledge and
compassion.
VISION STATEMENT OF THE SCHOOL OF ELECTRICAL

ENGINEERING
To be a leader for academic excellence in the field of electrical, instrumentation

and control engineering imparting high quality education and research leading
to global competence for the societal and industrial developments.
MISSION STATEMENT OF THE SCHOOL OF ELECTRICAL

ENGINEERING
 Impart high quality education and interdisciplinary research by providing

conducive teaching learning environment and team spirit resulting in
innovation and product development.
 Enhance the core competency of the students to cater to the needs of the
industries and society by providing solutions in the field of electrical,
electronics, instrumentation and automation engineering.
 Develop analytical skills, leadership quality and team spirit through
balanced curriculum.
M.TECH (C&A) Page 2

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)
1. Graduates will be engineering practitioners and leaders, who

would help solve industry’s technological problems.
2. Graduates will be engineering professionals, innovators or

entrepreneurs engaged in technology development, technology
deployment, or engineering system implementation in industry.
3. Graduates will function in their profession with social awareness

and responsibility.
4. Graduates will interact with their peers in other disciplines in

industry and society and contribute to the economic growth of
the country.
5. Graduates will be successful in pursuing higher studies in

engineering or management.
6. Graduates will pursue career paths in teaching or research.
M.TECH (C&A) Page 3

PROGRAMME OUTCOMES (POs)
PO_01: Having an ability to apply mathematics and science in engineering

applications.
PO_02: Having a clear understanding of the subject related concepts and of
contemporary issues and apply them to identify, formulate and analyse complex
engineering problems.
PO_03: Having an ability to design a component or a product applying all the
relevant standards and with realistic constraints, including public health, safety,
culture, society and environment
PO_04: Having an ability to design and conduct experiments, as well as to
analyse and interpret data, and synthesis of information
PO_05: Having an ability to use techniques, skills, resources and modern
engineering and IT tools necessary for engineering practice
PO_06: Having problem solving ability- to assess social issues (societal, health,
safety, legal and cultural) and engineering problems
PO_07: Having adaptive thinking and adaptability in relation to environmental
context and sustainable development
PO_08: Having a clear understanding of professional and ethical responsibility
PO_09: Having cross cultural competency exhibited by working as a member or
in teams
PO_10: Having a good working knowledge of communicating in English –
communication with engineering community and society
PO_11: Having a good cognitive load management skills related to project
management and finance
PO_12: Having interest and recognise the need for independent and lifelong
learning
M.TECH (C&A) Page 4

ADDITIONAL PROGRAMME OUTCOMES (APOs)
APO_01: Having an ability to be socially intelligent with good SIQ (Social

Intelligence Quotient) and EQ (Emotional Quotient)
APO_02: Having Sense-Making Skills of creating unique insights in what is

being seen or observed (Higher level thinking skills which cannot be codified)
APO_03: Having design thinking capability

APO_04: Having computational thinking (Ability to translate vast data in to
abstract concepts and to understand database reasoning
APO_05: Having Virtual Collaborating ability
APO_06: Having an ability to use the social media effectively for productive
use
APO_07: Having critical thinking and innovative skills
APO_08: Having a good digital footprint
M.TECH (C&A) Page 5

PROGRAMME SPECIFIC OUTCOMES (PSOs)
On completion of M. Tech. (Control and Automation) programme,

graduates will be able to
 PSO1: Apply technical knowledge, skills and analytical ability to

design and develop controllers as well as employ techniques for
automation of systems using modern tools and technologies.
 PSO2: Analyse, interpret and solve problems related to process

control, automation, measurement and control etc.
 PSO3: Solve research gaps and provide solutions to socio-

economic, and environmental problems.
M.TECH (C&A) Page 6

CREDIT STRUCTURE
Category-wise Credit distribution
Credits Breakup
CREDITS
University Core 27
University Elective 6
Program Core 19
Program Elective 18
Total 70
M.TECH (C&A) Page 7

DETAILED CURRICULUM
University Core
Course
S. No. Course Title L T P J C
Code
1. MAT6001 Advanced Statistical Methods 1 0 2 0 2
2. ENG5001 Fundamentals of Communications of Skills 0 0 2 0 1
3. STS5001 Soft skills 3 - - - 1
4. STS5002 Soft skills 3 - - - 1
5. SET5001 SET Projects - - - 8 2
6. SET5002 SET Projects - - - 8 2
7. EEE 6099 Master's Thesis - - - 64 16
8. GER5001 Deutsch Fuer Anfaenger 2 0 0 0 2
9. FRE5001 Francais Fonctionnel 2 0 0 0 2
Programme Core
S. Course
Course Title L T P J C
No. Code
1. EEE5012 System Theory 2 0 2 0 3
2. EEE5013 Random variables and State estimation 3 0 0 0 3
3. EEE5014 Smart Sensor Systems 3 0 0 0 3
4. EEE5015 Process Dynamics and Control 3 0 2 0 4
5. EEE5016 Real Time Embedded Systems 2 0 0 4 3
6. EEE5017 Industrial Automation 2 0 2 0 3
M.TECH (C&A) Page 8

Programme Elective
Course
S. No. Course Title L T P J C
Code
1. EEE5018 Industrial Robotics 3 0 0 0 3
2. EEE5019 Control of Electric Drives 3 0 0 0 3
3. EEE6011 Optimal Control Systems 3 0 0 0 3
4. EEE5020 Machine Learning 2 0 0 4 3
5. EEE6012 Adaptive and Robust Control 2 0 0 4 3
6. EEE6013 Discrete Control Systems 3 0 0 0 3
7. EEE5021 Industrial Data Networks 3 0 0 0 3
8. EEE5022 Power Plant control & Instrumentation 2 0 0 4 3
9. EEE6015 SCADA Systems and Applications 3 0 0 0 3
10. EEE6014 Fault detection and diagnosis 2 0 0 4 3
11. EEE5030 Flight Control Systems 3 0 0 0 3
12. EEE6021 Multivariable Control System 3 0 0 0 3
13. EEE5029 Data Acquisition & Hardware Interfaces 3 0 0 0 3
14. EEE5031 Advanced Reliability Engineering 1 2 0 0 2
Modelling and Simulation of Electrical
15. EEE6016 2 0 0 4 3
Systems
16. EEE5032 Building Automation 3 0 0 0 3
M.TECH (C&A) Page 9

EEE5012 System Theory L T P J C
2 0 2 0 3
Pre-requisite NIL Syllabus version
Anti-requisite v. 1.0
Course Objectives:
To present a clear exposition of basics of modern control including,
1. State variable representation of dynamic systems

2. Solution of the state equation
3. Stability, controllability and observability of systems
Expected Course Outcome:
On completion of the course, the student will be able to
1. Represent dynamical systems in various state space formats

2. Solve linear and nonlinear state equations
3. Analyze the properties of linear systems such as controllability and observability
4. Design state feedback controller and state observers for simple practical dynamic systems.
5. Perform equilibrium point analysis for linear and nonlinear systems.
6. Utilize the techniques such as describing function, Lyapunov Stability, Popov’s Stability Criterion to
assess the stability of certain class of non-linear system.
7. Realize reduced and minimal system equations.
8. Design and conduct experiments, as well as analyze and interpret data
Student Learning Outcomes (SLO): 1,2,17
Student Learning Outcomes involved:
1. Having an ability to apply mathematics and science in engineering applications

2. Having a clear understanding of the subject related concepts and of contemporary issues
17. Having an ability to use techniques, skills and modern engineering tools necessary for engineering
practice
Module:1 State Variable Representation: 4 hours
Introduction-Concept of State-State equation for Dynamic Systems-Time invariance and linearity-Non

uniqueness of state model-State Diagrams-Physical System and State Assignment
Module:2 Solution of State Equation: 4 hours
Existence and uniqueness of solutions to continuous-time state equations-Solution of linear time varying
and linear time invariant state equations-Evaluation of matrix exponential- System modes-Role of
Eigenvalues and Eigenvectors.
M.TECH (C&A) Page 10

Module:3 Controllability and Observability: 4 hours
Controllability and Observability - Stabilizability and Detectability-Test for Continuous time systems- Time
varying and Time invariant case.
Module:4 Modal Control : 4 hours
Introduction-Controllable and Observable Companion Forms-SISO and MIMO Systems- The Effect of State
Feedback on Controllability and Observability-Pole Placement by State Feedback for both SISO and MIMO
Systems-Full Order and Reduced Order Observers.
Module:5 Lyapunov Stability: 4 hours
Introduction-Equilibrium Points-Stability in the sense of Lyapunov-BIBO Stability-Stability of LTI Systems-

Equilibrium Stability of Nonlinear Continuous Time Autonomous Systems.
Module:6 Lyapunov's Direct Method: 4 hours
The Direct Method of Lyapunov and the Linear Continuous-Time Autonomous Systems-Finding
Lyapunov Functions for Nonlinear Continuous Time Autonomous Systems-Krasovskii and
Variable-Gradient Method.
Module:7 Realization: 4 hours
Output Controllability-Reducibility- System Realizations minimal realization, balanced realization
Module:8 Contemporary issues: 2 hours
Total Lecture hours: 30 hours
Text Book(s)
1. Ogata, "Modern Control Engineering", 5th Edition, Prentice Hall India, 2010.
2. M. Gopal, “Modern Control System Theory”, 3rd edition, New Age International, 2014.
Reference Books
1. Slotine and Li, "Applied Nonlinear Control", Prentice Hall Inc., 2005.
2. Hassan K Khalil, “Nonlinear Control", Pearson, Boston, 2015.
Mode of Evaluation: CAT / Assignment / Quiz / FAT / Project / Seminar
List of Challenging Experiments (Indicative)

1. State modeling of armature controlled motor 2 hours
2. State modeling of field controlled motor 2 hours
3. State modeling of dc generator 2 hours
4. State modeling of balancing broomstick 2 hours
5. State modeling of bridge circuit 2 hours
6. State modeling of magnetic suspension system 2 hours
7. State modeling of ball on beam system 2 hours
8. Controllability and observability of armature controlled dc motor 2 hours
9. Controllability and observability of balancing broomstick 2 hours
10. Controllability and observability of bridge circuits 2 hours
11. Controllability and observability of magnetic suspension system 2 hours
12. Design of state feedback controller for balancing broomstick problem 2 hours
13. Design of observer for balancing broomstick problem 2 hours
14. Design of state feedback controlled, balancing broomstick problem with observer 2 hours
15. Stability analysis of straight and inverted pendulum 2 hours
Total Laboratory Hours 30 hours
Mode of assessment:: Assignment / FAT
Recommended by Board of Studies 05/03/2016
Approved by Academic Council 40th AC Date 18/03/2016

EEE5013 Random Variables and State Estimation L T P J C
3 0 0 0 3
Course Objectives:
1. To provide information on identifying and controlling processes with random behavior

On the completion of this course the student will be able to:
1. Define, understand and manipulate scalar and multiple random variables, using the theory of probability.
2. Understand the relationship between random variables within a random vector
3. Design maximum likelihood estimators and MMSE estimators.
4. Solve basic problems in filtering, prediction and smoothing.
5. Design Kalman filter for prediction and control of stochastic systems.
6. Conduct experiments to estimate nonparametric system models
7. Choose, design and test a structure for parametric estimation.
Student Learning Outcomes (SLO): 1,2,5,7

5. Having design thinking capability
7. Having computational thinking (Ability to translate vast data in to abstract concepts and to understand
database reasoning)
Module:1 Basics of Probability Theory: 5 hours
Review, Random variables, Multiple random variables
Module:2 Random Process and their characteristics: 5 hours
Correlation functions: autocorrelation, cross correlation. Temporal and Spatial Characteristics
Module:3 Parameter Estimation Theory: 8 hours
Principle of estimation, properties, Unbiased and consistent estimators, Cramer-Rao bounds. Maximum
Likelihood estimators, Bayesian estimation: MAP, MSE, MMSE. Waveform estimation.
Module:4 Wiener Estimation: 5 hours
Wiener Hoff Equation, FIR Wiener filter, Causal IIR Wiener filter, Non-causal IIR Wiener filter. Application of

Weiner’s theory in compensator design for feedback control system.
Module:5 Markov & Kalman Estimator’s: 8 hours
Gauss Markov model for vector random process, Kalman Filtering and Prediction for discrete and continuous
time system, Minimum variance control.
Module:6 Nonparametric Model Estimation: 6 hours
Correlation and spectral analysis for non-parametric model identification, obtaining estimates of
the plant impulse, step and frequency responses from identification data.
Module:7 Parametric Model Estimation: 6 hours
Prediction Error Model Structures, parametric estimation using one-step ahead prediction error model
structures and estimation techniques for ARX, ARMAX, Box-Jenkins, FIR, Output Error models. Residual
analysis for determining adequacy of the estimated models.
Total Lecture hours: 45 Hours
Text Book(s)
1. H Stark and J Woods, Probability, Statistics and Random Processes for Engineers, 4th edition, Prentice
Hall, 2012.
2. Arun K. Tangirala, Principles of System Identification: Theory and Practice, Taylor and Francis, 1st Edition,
2014.
Reference Books
3. Alberto Leon-Garcia, Probability, Statistics and Random Processes for Electrical Engineering, 2nd Edition,
Pearson Education, 2016.
4. H. L. Vantrees, K. L. Bell and Z. Tian, Detection, Estimation and Modulation theory, 2nd Edition, Wiley,
2013.
5. R. G. Brown, and Patrick Y. C. Hwang. Introduction to Random Signals and Applied Kalman Filtering with
Matlab Exercises, 4th Edition Wiley, 2012.
6. A. Papoulis and S. U. Pillai, Probability, Random Variables and Stochastic Processes, 4th Edition,
McGraw-Hill, 2014 (reprint).

EEE5014 Smart Sensor Systems L T P J C
3 0 0 0 3
Course Objectives:
1. To impart knowledge on Smart sensing technology and its applications.

2. To introduce the standards and protocols used for smart sensing.
1. Select the right sensor for a given application.

2. Design basic building blocks for a Smart sensor.
3. Design compensators and perform calibration for smart sensors.
4. Design, synthesize and layout a VLSI sensor.
5. Design micro power generation systems
6. Interpret IoT based systems for smart applications.
7. Apply smart sensors for Health, Industrial and Home related application.

6. Having an ability to design a component or a product applying all the relevant standards and with realistic
constraints
Module:1 Smart Sensor Introduction: 6 hours
Classic vs Smart sensors, Architecture of Smart Sensors: Important components, their features. Monolithic
integrated smart sensor, Hybrid integrated smart sensor, Impedance sensing system, Smart temperature
sensor, Smart Wind sensor, Smart Hall sensor.
Module:2 Linearization: 7 hours
Linearization using shunt resistance, Divider circuit, higher order linearizing circuit. Linear interpolation,
Piecewise linearization, Lookup table approach, Adaptive filters based approach.
Module:3 Calibration and Compensation: 6 hours
Calibration and Self Calibration of smart sensors, Offset compensation, Error and Drift compensation, Lead
wire compensation, Temperature effect and compensation.

Module:4 VLSI Sensors: 6 hours
Analog Numerical computation - CORDIC Computation. Adaptive filtering – LMS algorithm, Bit stream
multiplication. Analog VLSI based Neural Network.
Module:5 Micro-power Generation: 6 hours
Introduction, Energy storage system, Thermoelectric energy harvesting, Vibration and Motion energy
harvesting, Far-Field RF energy harvesting, Photovoltaic.
Module:6 Standards and protocols: 7 hours
Design and Implementation of IoT for Environmental Condition Monitoring, Development of Smart
Bed for Health Care Application, Study of Smart City and its Design, Wearable smart sensors,
Biosensors and applications.
Module:7 Case Studies: 5 hours
Design and Implementation of IoT for Environmental Condition Monitoring, Development of Smart Bed for
Health Care Application, Study of Smart City and its Design, Wearable smart sensors, Biosensors and
applications.
Text Book(s)
1. Manabendra Bhuyan, “Intelligent Instrumentation: Principles and Applications”, CRC Press, 2011.
2. Gerard Meijer, Kofi Makinwa, Michiel Pertijs, “Smart Sensor Systems: Emerging Technologies and
Applications”, IEEE press, Wiley, 2014.
Reference Books
7. Kevin Yallup, Krzysztof Iniewski, “Technologies for Smart Sensors and Sensor Fusion”, CRC Press,
2014.
8. Krzysztof Iniewski, “Smart Sensors for Industrial Applications”, CRC Press, 2013.

EEE5015 Process Dynamics and control L T P J C
3 0 2 0 4
Course Objectives:
1. To provide in depth knowledge of process modeling

2. To understand the dynamic and static behavior of the modeled system.
3. To Select of Control Valve for different applications.
4. To design PID and Advanced control strategies based on process model.
1. Develop mathematical models for dynamic processes

2. Analyze process stability, dynamic responses, frequency analysis of dynamic processes.
3. Choose necessary final control element for a given application.
4. Select and tune PID controllers for the given systems.
5. Analyze the performance of a closed loop control approach.
6. Plan a control strategy for a process involving multiple variables and constraints.
7. Design controller strategies involving models of the systems.
8. Design and Conduct experiments, as well as analyze and interpret data

6. Having an ability to design a component or a product applying all the relevant standards and with realistic
constraints
9. Having problem solving ability- solving social issues and engineering problems
17. Having an ability to use techniques, skills and modern engineering tools necessary for engineering practice
Module:1 Process Dynamics: 7 hours
Need for Process Control - objective of modelling-models of hydraulic, liquid, thermal and gas systems -
Degrees of Freedom - Continuous and batch processes – Self regulation – Lumped and Distributed parameter
models – Linearization of nonlinear systems.
Module:2 Dynamic and Steady State Behavior of Process: 4 hours
Dynamic response of a first order process, first order plus dead time process, second order process, pure
capacitive process, pure dead time, higher order process; inverse response; Pade approximation.
Module:3 Final Control Elements: 6 hours

I/P converter - Pneumatic and electric actuators – Valve Positioner – Control Valves – Characteristic of Control
Valves - Inherent and Installed characteristics – Modeling of pneumatic control valve – Valve body -
Commercial valve bodies – Control valve sizing – Cavitation and flashing – Selection criteria.
Module:4 Control Actions: 7 hours
Concept of servo and regulatory problems - Selection of measured, manipulated and controlled variables -
Types of controller - Characteristic of on-off, proportional, integral and derivative controllers – P+I,P+D and
P+I+D control modes – Auto/manual transfer - Reset windup – Practical forms of PID Controller.
Module:5 Design of feedback controller: 6 hours
Evaluation criteria – IAE, ISE, ITAE and ¼ decay ratio – Tuning – Process reaction curve method, Continuous
cycling method - direct synthesis
Module:6 Enhancement to single loop regulatory control: 7hours
Feed forward controller: design with steady state model, design with dynamic model, combination
of feed forward-feedback structure - Cascade control: analysis and design - Ratio control - split
range control - override control - inferential control.
Module:7 Model based control: 6 hours
IMC structure – development and design - IMC based PID control – MPC: Dynamic matric control, Generalized
predictive control.
Text Book(s)
1. Seborg, Dale E., Duncan A. Mellichamp, Thomas F. Edgar, and Francis J. Doyle, “Process dynamics
and control”, 4th edition, John Wiley & Sons, 2016.
2. Stephanopoulos, George, “Chemical Process Control: An Introduction to Theory and Practice”,

Pearson India Education Services, 2015
Reference Books
9. Coughanowr, Donald R., and Lowell B. Koppel, “Process systems analysis and control”,
McGraw-Hill, 2009.
10. Johnson, Curtis D, “Process control instrumentation technology”, Prentice Hall, 2013.
11. Lipták, Béla G., ed. “Process Control: Instrument Engineers' Handbook. Butterworth-Heinemann,
2013.

12. Bequette, B.W., “Process Control Modeling, Design and Simulation”, Prentice Hall of India, 2010.
1. Interacting and Non-interacting System 2 hours

a) Time Constant
b) Response
2. Level Control Loop 2 hours
a) Servo & Regulatory Problem
b) Level Transmitter Characteristics
c) FCE Characteristics
3. Pressure Control Loop 2 hours
b) Modeling of Pressure Process Station
4. Flow Control Loop 2 hours
b) Tuning of controller using Auto tuning method
5. P, ON-OFF Control of Thermal Process 2 hours
6. I/P & P/I Converter 2 hours
a) Linearity
b) Hysteresis
c) Deviation
7. Control Valve characteristics 2 hours
a) Verifying the inherent and installed characteristics of control valve

b) Rangeability of control valve
8. Control of Cascade Process 2 hours
9. Performance comparison different controller tuning methods 2 hours
10. Dead time compensation using smith predictor 2 hours
11. Disturbance rejection assessment of IMC-PI controller 2 hours
12. Simulation of Nonlinear process models using ODE solver 2 hours
13. Position and velocity algorithm realization using MATLAB 2 hours
14. Design and verification of Feed Forward controller 2 hours
15 Performance comparison of single and Multi-loop controllers 2 hours
Mode of assessment: Assignments / FAT

EEE5016 Real Time Embedded Systems L T P J C
2 0 0 4 3
Course Objectives:
1. To give an emphasis hardware architecture and network interfaces of embedded system.

2. To provide essential knowledge on various wireless technologies in the design of embedded system.
1. Adapt with the trends in embedded system development.

2. Design hardware components for embedded system applications.
3. Develop and test programs for embedded system applications.
4. Design and develop embedded system for multifarious applications.
5. Develop real time OS architectures and functions.
6. Develop and test Finite State Machine models.
7. Design systems by implementing state and state transition diagrams
8. Design a component or a product applying all the relevant standards with realistic
Constraints.
9. Having problem solving ability- solving social issues and engineering problems
12. Having adaptive thinking and adaptability
14. Having an ability to design and conduct experiments, as well as to analyze and interpret data
17. Having an ability to use techniques, skills and modern engineering tools necessary for engineering practice
Module:1 Overview of Embedded system and Software: 3 hours
Embedded system- Definition, Categories, Requirements. Challenges and issues in embedded software
development, Trends in embedded software development, Applications of embedded systems.
Module:2 Hardware Architecture of Embedded System: 4 hours
Processor, Memory, Memory models, Latches and Buffers, crystal, Timers, reset circuit, Watchdog timer, chip
select logic circuit, ADC and DAC, Display units, Communication interfaces, Introduction to emulators.
Module:3 Programming Embedded Systems: 4 hours
Program Design - Design Patterns for Embedded Systems - Programming Languages - Object Oriented
Programming - Use of High Level Languages - Compiling, Assembling, Linking, Debugging - Program Validation
and Testing.

Module:4 Embedded System Development: 4 hours
Design Methodologies - Requirement Analysis - Static Modeling - Object and Class Structuring - Dynamic
Modeling - Architectural Design - Hardware-Software Partitioning - Hardware-Software Integration -Fault-
tolerance Techniques -Reliability Evaluation Techniques.
Module:5 Real Time Operating System : 6 hours
OS Dependent functionalities – Resource management – RTOS vs General purpose OS. Kernel Architecture and
Functionalities (Task management, Process Scheduling, Resource management (Semaphores and Mutex), Task
Synchronization. Embedded software development Life cycle. Structure of C compiler, code optimization.
Module:6 Moore and Mealy Models: 3 hours
Moore and Mealy FSM- Block diagram, definition of the state, building state transition diagram to
state table, Relative trade-offs. Finite State Machine (FSM) - Rules for designing FSM
Module:7 Embedded System Modeling: 4 hours
Design of a Level to Pulse converter, Design examples implementing state and state transition diagram for
vending machine, ATM, digital watch interface. Introduction to CPLD and FPGA.
Text Book(s)
1. Wayne Wolf, “Computers as Components- Principles of Embedded Computer Systems Design", Morgan
Kaufman publishers, 3rd Edition, 2012.
2. David.E.Simon, “An Embedded Software primer”, Pearson Education Inc., 2012.
Reference Books
13. Tammy Noergaard,“Embedded Systems Architecture A Comprehensive Guide for Engineers and
Programmers”, Oxford, Newnes: Elsevier, 2013
14. Frank Vahid, Tony Givagis, “Embedded System Design: : a unified hardware / software introduction”,
Wiley, 2010
15. C.M. Krishna, Kang G. Shin, “Real Time systems”, McGraw Hill, 2010.

EEE5017 Industrial Automation L T P J C
2 0 2 0 3
Course Objectives:
1. Provide strong foundation to solve control and instrumentation problems in continuous or batch problems.
2. Technical competence through hands‐on experience with industrial hardware and software.
3. Systematic design approach to engineering projects through solving tutorial problems and completing the
major assignment.
1. Select and interface hardware for an automatic control system.

2. Use PLC for an automatic control system confining to standards.
3. Develop PLC code for automation applications requiring special functions.
4. Test digital and analog data in PLC based applications.
5. Design or configure various subsystems for industrial automation.
6. Plan the hardware and software component required to constitute a SCADA system.
7. Develop code and configure DCS to handle local and distributed automation tasks
8. Design and conduct experiments, as well as analyze and interpret data
17. Having an ability to use techniques, skills and modern engineering tools necessary for engineering
practice
18. Having critical thinking and innovative skills
Module:1 Introduction to Programmable Logic Controllers: 4 hours
Advantages & disadvantages of PLC with respect to relay logic, PLC architecture, Input Output modules, PLC
interfacing with plant, memory structure of PLC.
Module:2 PLC Programming Methodologies: 4 hours
Ladder diagram, STL, functional block diagram, SFC, Instruction List. Creating ladder diagram from process
control descriptions, Introduction to IEC61131 international standard for PLC.

Module:3 PLC Functions: 4 hours
Bit logic instructions, ladder diagram examples, interlocking, latching, inter dependency and logical functions,
PLC Timer & Counter functions on-delay timer, off-delay timers, retentive on-delay timers, pulse timers, timer
examples, up-counter, down-counter and up-down counter, counter examples, register basics.
Module:4 PLC Data Handling: 4 hours
Data move instructions, table and register moves, PLC FIFO & LIFO functions. PLC arithmetic and logical
functions: addition, subtraction, multiplication, division instructions, increment decrement, trigonometric and
log functions, AND, OR, XOR, NOT functions, PLC compare and convert functions. PLC program control and
interrupts: jumps, subroutine, sequence control relay.
Module:5 Automation System Structure: 4 hours
Instrumentation Subsystem, Control Subsystem – HMI in Automation, Human Interface Subsystem, Advance
Human Interface System.
Module:6 Introduction to SCADA: 4 hours
Data acquisition system, Evolution of SCADA, Communication Technologies, Monitoring and

Supervisory Functions.
Module:7 Distributed Control Systems: 4 hours
DCS detail engineering, specifications, configuration and programming, functions including database
management, reporting, alarm management, communication, third party interface, control, display etc.
Enhanced functions viz. Advance Process Control, Batch application, Historical Data Management, OPC
support, Security and Access Control etc. Performance Criteria for DCS and other automation tools.
Text Book(s)
1. W.Boldon, ‘Programmable logic controllers’, 5th Edition, Elsevier India Pvt. Ltd., New Delhi, 2011.
2. Stuart A.Boyer, “SCADA: ‘Supervisory control and Data Acquisition’, 4th Edition, ISA, 2010.
Reference Books
16. G. K. McMillan, Douglas Considine, “Process/Industrial Instruments Hand book”, 5th edition, McGraw
Hill, New York, 2009.

17. Robert Radvanovsky, Jacob Brodsky, “Handbook of SCADA/Control Systems Security”, 2nd edition,
CRC press, 2016.
18. Natalia Olifer, Victor Olifer, “Computer networks: Principles, Technologies and protocols for Network
design”, John Wiley & Sons, 2010.
1. Analysis of timer and counter functions using PLC 2 hours
2. Batch process control and Sequential control using PLC 2 hours
3. Controlling a pick and place robotic arm 2 hours
4. Controlling a material handling conveyor 2 hours
5. Controlling a gantry crane 2 hours
6. Controlling a 3-axis positioner 2 hours
7. HMI module interface and coding with PLC for pick and place robotic arm 2 hours
8. HMI module interface and coding with PLC for material handling 2 hours
9. HMI module interface and coding with PLC for gantry crane 2 hours
10. HMI module interface and coding with PLC for 3-axis positioner 2 hours
11. PID Control Implementation Using PLC 2 hours
12. Program Control Instruction – MCR 2 hours
13. Data Acquisition and Control 2 hours
14. Fuzzy Logic Control Implementation 2 hours
15. PLC Interfacing 2 hours
Total Laboratory Hours 30 hours
Mode of assessment: Assignments / FAT

M.Tech - CA AY 2019 2020

Uploaded by

Copyright:

Available Formats

M.Tech - CA AY 2019 2020

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

M.Tech - CA AY 2019 2020

Uploaded by

Copyright:

Available Formats

SCHOOL OF ELECTRICAL ENGINEERING

M. Tech Control and Automation

Transforming life through excellence in education and research.

MISSION STATEMENT OF VELLORE INSTITUTE OF

World class Education: Excellence in education, grounded in ethics and

VISION STATEMENT OF THE SCHOOL OF ELECTRICAL

To be a leader for academic excellence in the field of electrical, instrumentation

MISSION STATEMENT OF THE SCHOOL OF ELECTRICAL

 Impart high quality education and interdisciplinary research by providing

M.TECH (C&A) Page 2

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs)

1. Graduates will be engineering practitioners and leaders, who

2. Graduates will be engineering professionals, innovators or

3. Graduates will function in their profession with social awareness

4. Graduates will interact with their peers in other disciplines in

5. Graduates will be successful in pursuing higher studies in

6. Graduates will pursue career paths in teaching or research.

M.TECH (C&A) Page 3

PROGRAMME OUTCOMES (POs)

PO_01: Having an ability to apply mathematics and science in engineering

M.TECH (C&A) Page 4

ADDITIONAL PROGRAMME OUTCOMES (APOs)

APO_01: Having an ability to be socially intelligent with good SIQ (Social

APO_02: Having Sense-Making Skills of creating unique insights in what is

APO_03: Having design thinking capability

APO_05: Having Virtual Collaborating ability

APO_07: Having critical thinking and innovative skills

APO_08: Having a good digital footprint

M.TECH (C&A) Page 5

PROGRAMME SPECIFIC OUTCOMES (PSOs)

On completion of M. Tech. (Control and Automation) programme,

 PSO1: Apply technical knowledge, skills and analytical ability to

 PSO2: Analyse, interpret and solve problems related to process

 PSO3: Solve research gaps and provide solutions to socio-

M.TECH (C&A) Page 6

Category-wise Credit distribution

M.TECH (C&A) Page 7

M.TECH (C&A) Page 8

16. EEE5032 Building Automation 3 0 0 0 3

M.TECH (C&A) Page 9

Pre-requisite NIL Syllabus version

To present a clear exposition of basics of modern control including,

1. State variable representation of dynamic systems

Expected Course Outcome:

On completion of the course, the student will be able to

1. Represent dynamical systems in various state space formats

Student Learning Outcomes (SLO): 1,2,17

Student Learning Outcomes involved:

1. Having an ability to apply mathematics and science in engineering applications

Module:1 State Variable Representation: 4 hours

Introduction-Concept of State-State equation for Dynamic Systems-Time invariance and linearity-Non

Module:2 Solution of State Equation: 4 hours

M.TECH (C&A) Page 10

Module:4 Modal Control : 4 hours

Module:5 Lyapunov Stability: 4 hours

Introduction-Equilibrium Points-Stability in the sense of Lyapunov-BIBO Stability-Stability of LTI Systems-

Module:6 Lyapunov's Direct Method: 4 hours

Module:7 Realization: 4 hours