251642368

________________________________________________________________________

ASN15
TECHNICAL SPECIFICATION

________________________________________________________________________

ASN15 TECHNICAL SPECIFICATION Version 1

SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA S.p.A. No Date Page
part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE MICROELETTRONICA
S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 22/06/2011 1 of 13
 251658752

INDEX

1 INTRODUCTION ........................................................................................................................................................... 3
2 FREQUENCY BAND ..................................................................................................................................................... 4
3 EQUIPMENT CHARACTERISTICS ............................................................................................................................. 6
3.1 TRANSMITTER CHARACTERISTICS ................................................................................................................................ 6
3.2 RECEIVER CHARACTERISTICS ....................................................................................................................................... 8
3.4 RADIO FLANGE........................................................................................................................................................... 10
3.5 POWER SUPPLY AND CONSUMPTION .......................................................................................................................... 10
3.6 MECHANICAL CHARACTERISTICS ............................................................................................................................... 11
3.7 IDU/ODU CABLE INTERFACE .................................................................................................................................... 12
3.8 SURGE AND LIGHTNING PROTECTION ......................................................................................................................... 13
3.9 ENVIRONMENTAL CONDITIONS .................................................................................................................................. 13

ASN15 TECHNICAL SPECIFICATION Version 1

SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA S.p.A. No Date Page
part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE MICROELETTRONICA
S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 22/06/2011 2 of 13
 251658752

1 INTRODUCTION

Scope of the document is to provide technical specification for ODU ASN 15 GHz for PDH/SDH/ETH application.

ASN ODU will be part of ALS product family and it will be interoperable with SDH series (ALS), Plus series (ALplus and
ALCplus ) Plus 2 series IDU (AL plus 2 and ALC plus 2) capable to transmit radio frame in 56MHz and 256QAM modulation
scheme.

ODU ASN 15 GHz belongs to ASN ODU family providing following characteristics;

• ASN ODU, that supports capacities up to 400 Mbps, with 4/16/32/64/128/256 QAM modulation schemes

ASN ODU 15 GHz

• Channel spacing: 7 /14 / 28 / 56 MHz

• Modulations: 4 /16 / 32 / 64 / 128 /256 QAM
• IDU supported: ALS, ALC plus, ALCplus2/e IDU

ASN15 TECHNICAL SPECIFICATION Version 1

SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA S.p.A. No Date Page
part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE MICROELETTRONICA
S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 22/06/2011 3 of 13
 251658752

2 FREQUENCY BAND

Frequency band:

FREQUENCY RANGE DUPLEX SPACING REFERENCE

[MHz] [MHz] RECOMMENDATION
14501 ÷ 15348 420 ITU-R F636
14403 ÷ 15348 490 ITU-R F636
14501 ÷ 15348 728 CEPT T/R 12-07
14613 ÷ 15251 322 N.A.
14620 ÷ 15244 315 N.A.
14500 ÷ 15350 644 ITU-R F636

Modulation scheme: 4QAM/8PSK/16QAM/32QAM/64QAM/128QAM/256QAM

Emitted spectrum: according to ETSI EN 302 217

Channel spacing: 7, 14, 28 and 56 MHz

FREQUENCY RANGE: 14501 ÷ 15348 MHz - GO-RETURN: 420 MHz

ITU-R F636 - f0=11701MHz
Sub Band Lower Half Limits [MHz] Upper Half Limits [MHz] RF Filter Tuning Range [MHz]
1 14500 ÷ 14620 14920 ÷ 15040
2 14612 ÷ 14732 15032 ÷ 15152 120
3 14724 ÷ 14844 15144÷ 15264
4 14808 ÷ 14928 15228 ÷ 15348
FREQUENCY RANGE: 14403 ÷ 15348 MHz - GO-RETURN: 490 MHz
ITU-R F636 - f0=11701MHz
Sub Band Lower Half Limits [MHz] Upper Half Limits [MHz] RF Filter Tuning Range [MHz]
1 14402 ÷ 14522 14892 ÷ 15012
2 14514 ÷ 14634 15004 ÷ 15124 120
3 14626 ÷ 14746 15116÷ 15236
4 14738 ÷ 14858 15228 ÷ 15348
FREQUENCY RANGE: 14501 ÷ 15348 MHz - GO-RETURN: 728 MHz
CEPT T/R 12-07 - f0=14924MHz
Sub Band Lower Half Limits [MHz] Upper Half Limits [MHz] RF Filter Tuning Range [MHz]
1 14500 ÷ 14620 15228 ÷ 15348 120

ASN15 TECHNICAL SPECIFICATION Version 1

SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA S.p.A. No Date Page
part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE MICROELETTRONICA
S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 22/06/2011 4 of 13
 251658752

FREQUENCY RANGE: 14600 ÷ 15240 MHz - GO-RETURN: 322 MHz

Sub Band Lower Half Limits [MHz] Upper Half Limits [MHz] RF Filter Tuning Range [MHz]
1 14613 ÷ 14705 14935 ÷ 15027
2 14669 ÷ 14761 14991 ÷ 15083
3 14725 ÷ 14817 15047 ÷ 15139 92
4 14781 ÷ 14873 15103 ÷ 15195
5 14837 ÷ 14929 15159 ÷ 15251
FREQUENCY RANGE: 14600 ÷ 15240 MHz - GO-RETURN: 315 MHz
Sub Band Lower Half Limits [MHz] Upper Half Limits [MHz] RF Filter Tuning Range [MHz]
1 14620 ÷ 14705 14935 ÷ 15020
2 14676 ÷ 14761 14991 ÷ 15076
3 14732 ÷ 14817 15047 ÷ 15132 85
4 14788 ÷ 14873 15103 ÷ 15188
5 14844 ÷ 14929 15159 ÷ 15244
FREQUENCY RANGE: 14500 ÷ 15350 MHz - GO-RETURN: 644 MHz
Sub Band Lower Half Limits [MHz] Upper Half Limits [MHz] RF Filter Tuning Range [MHz]
1 14501 ÷ 14621 15145 ÷ 15265 120 ( 1)
2 14585 ÷ 14705 15229 ÷ 15349
RF filter sub-bands for and ASN15

1
( ) This RF filter sub-bands are available only for AS ODU

ASN15 TECHNICAL SPECIFICATION Version 1

SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA S.p.A. No Date Page
part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE MICROELETTRONICA
S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 22/06/2011 5 of 13
 251658752

EQUIPMENT CHARACTERISTICS
3.1 Transmitter Characteristics

Maximum transmit power: Nominal values at C-C’ point for 1+0 configuration:

ASN ODU STABILITY(2)

MODULATION
[dBm]
4QAMs 28 ±2 dB
4QAM 28 ±2 dB
8PSK 28 ±2 dB
16QAM 25 ±2 dB
32QAM 25 ±2 dB
64QAM 24 ±2 dB
128QAM 24 ±2 dB
256QAM 23 ±2 dB

2
( ) With ACM, the power stability for the reference modulation will be +2 dB. With ACM, for the modulation schemes different than the
reference one, the power stability will be +3/-2 dB

ASN15 TECHNICAL SPECIFICATION Version 1

SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA S.p.A. No Date Page
part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE MICROELETTRONICA
S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 22/06/2011 6 of 13
 251658752

3
Built-in transmit power attenuation range: 20( )

Attenuation Step: 1 dB step software adjustable

2
RTPC attenuation range: 20( ) dB

Accuracy of built-in transmit power attenuation:

±1 dB accuracy over attenuation range 0 ÷ 3 dB,

±2 dB accuracy over attenuation range 4 ÷ 30 dB

±3 dB accuracy over attenuation range 31 ÷ 40 dB.

4
Automatic Transmit Power Control (ATPC) range: 20( ) dB

ATPC Attenuation Step: 1 dB

Spurious emissions: According to ETSI EN 301 390

3
( ) (20+15) = 35 dB extended dynamic for automatic fade margin estimation
4
( ) The RTPC attenuation is included into the ATPC range.

ASN15 TECHNICAL SPECIFICATION Version 1

SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA S.p.A. No Date Page
part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE MICROELETTRONICA
S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 22/06/2011 7 of 13
 251658752

3.2 Receiver Characteristics

ALCplus2 IDU
Guaranteed receiver sensitivities (dBm) at point C - C’ (1+0)

CHANNEL
4QAMs 4QAM 8PSK 16QAM 32QAM 64QAM 128QAM 256QAM
SPACING [MHz]
BER=10-6 -92,5 -88,5 -86 -83 -80,5 -78 -76,5 -73,5
7
BER=10-10 -90,5 -86,5 -84 -81 -78,5 -76 -74,5 -71,5
BER=10-6 -90 -88 -84 -81,5 -78 -76 -73,5 -70,5
14
BER=10-10 -88 -86 -82 -79,5 -76 -74 -71,5 -68,5
BER=10-6 -87 -85,5 -80 -78,5 -75 -73 -71 -68
28
BER=10-10 -85 -83,5 -78 -76,5 -73 -71 -69 -66
BER=10-6 -84,5 -83 -77,5 -76,5 -73 -71,5 -68,5 -65
56
BER=10-10 -82,5 -81 -75,5 -74,5 -71 -69,5 -66,5 -63

ALCplus IDU:
-6
Guaranteed receiver sensitivities (dBm) @10 at point C - C’ (1+0)

Mbit/s 2x2 4x2 5x2/10 8x2 10x2 16x2/34 21x2 2x34/32x2 42x2 100 53x2

4QAM -90.5 -87.5 -86.5 -84.5 -83.5 -81.5 -80.5 n.a. n.a. n.a. n.a.

16QAM n.a. -83.5 -82.5 -80.5 -79.5 -77.5 -76.5 -74.5 -73.5 n.a. n.a.

32QAM n.a. n.a. n.a. n.a. n.a. n.a. n.a. n.a. n.a. -71.5 -71.5

ALS IDU:
-6
Guaranteed receiver sensitivities (dBm) @10 at point C - C’ (1+0)

128 QAM

STM-1 / 2xSTM-1 /

2xSTM-1 with frequency reuse 4xSTM-1 with frequency reuse

-69 -66

ASN15 TECHNICAL SPECIFICATION Version 1

SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA S.p.A. No Date Page
part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE MICROELETTRONICA
S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 22/06/2011 8 of 13
 251658752

Rx Spurious emissions: According to ETSI EN 301 390

-6
AGC dynamic range: From -22 dBm to Threshold @ BER=10

Accuracy of Rx level indication @ 25 C° (PC reading): ±2dB in the range -22dBm ÷ Thresholds

Accuracy of Rx level indication over the whole

temperature range (PC reading): ±3dB in the range -50dBm ÷ Thresholds

±4dB in the range -49dBm ÷ -20dBm

Maximum input level for BER 10-6 : -22 dBm

-12
Residual BER (RBER): 1x10

ASN15 TECHNICAL SPECIFICATION Version 1

SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA S.p.A. No Date Page
part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE MICROELETTRONICA
S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 22/06/2011 9 of 13
 251658752

3.3 Radio Flange

Radio WG flange type: UDR 140

3.4 Power Supply and Consumption

Operating voltage range: -40.8 ÷ -57.6 Vdc
5
Power consumption( ):

6
ODU Type IDU Type Config. Typical Power Consumption( ) Guaranteed Power Consumption (W)
1+0 56 ≤ 64.5
Compact - 1 RU
1+1 85 ≤ 97
ASN 1+0 64 ≤ 73.5
Modular – 1 RU 1+1 93 ≤ 106
2x(1+0) 93 ≤ 106

Power consumption (IDU):

5
IDU Type Config. Typical Power Consumption( ) Guaranteed Power Consumption (W)
1+0 34 ≤ 39.5
Compact - 1 RU
1+1 41 ≤ 47
1+0 42 ≤ 48.5
Modular – 1 RU 1+1 49 ≤ 56
2x(1+0) 49 ≤ 56

5
( ) Fully equipped configuration with 300 m ¼” IDU-ODU cable
6
( ) The typical values are achieved with 48 Vdc of input power voltage. For ALplus2 IDU the power consumption refers to the equipment
loaded with traffic on Ethernet and 16xE1 interfaces. For ALCplus2 the power consumption refers to the IDU with Ethernet and 16xE1
interfaces fully loaded.

ASN15 TECHNICAL SPECIFICATION Version 1

SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA S.p.A. No Date Page
part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE MICROELETTRONICA
S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 22/06/2011 10 of 13
 251658752

3.5 Mechanical Characteristics

Physical size of system components:

Width (mm) Height (mm) Depth (mm)

ODU 1+0 254 254 114

7
ODU 1+1 ( ) 278 254 296

Weight of system components:

ODU 1+0 4.5 kg

ODU 1+1 13.3 kg

ODU system 1+0/1+1: 4.4 kg

7
( ) Including Passive Hybrid

ASN15 TECHNICAL SPECIFICATION Version 1

SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA S.p.A. No Date Page
part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE MICROELETTRONICA
S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 22/06/2011 11 of 13
 251658752

3.6 IDU/ODU Cable Interface

The “Cable” interface is associated to the interconnection cable between IDU and ODU of ALS equipment. It is an internal
interface of the equipment.

The IDU-ODU interconnection cable carries:

- DC power supply from the IDU

- Base-Band data stream to/from IDU (bi-directional, full-duplex data transmission is used on IDU-ODU cable)

Main characteristics of “ODU-CABLE” interface are given in the following.

Type of connection between system components:

1 coaxial cable for unprotected systems

2 coaxial cables for protected systems

Cable Impedance: 50 Ω

Maximum distance between IDU-ODU with ¼” cable: 300 m

Insertion Loss: 24 dB @ 330 MHz

8
Required Cable Return Loss ( ): Better than 22 dB from 100 MHz to 400 MHz

Maximum Total DC Resistance: 4Ω

Tx nominal frequency: 330 MHz

Rx nominal frequency: 140 MHz

IDU-ODU metering signals: 5.2 MHz (ODU towards IDU) 17.5 MHz (IDU towards ODU)

Shielding Effectiveness: Better than 90 dB

8
( ) Including connectors

ASN15 TECHNICAL SPECIFICATION Version 1

SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA S.p.A. No Date Page
part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE MICROELETTRONICA
S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 22/06/2011 12 of 13
 251658752

3.7 Surge and Lightning Protection

Protection Method: Gas dischargers

Gas dischargers Technical Characteristics

DC spark-over voltage: 150 V +/- 20%

Nominal impulse discharge current (wave 8/20 µs): 20 kA

Single impulse discharge current (wave 8/20 µs): 25 kA

Operation and storage temperature: -40°C ÷ +90°C.

Performances: In accordance to EN 301 489

3.8 Environmental Conditions

Operational range for outdoor section ODU: -33°C ÷ +55°C

Survival temperature range for outdoor equipment: -40°C ÷ +60°C

Operational humidity for ODU: Weather proof according to IP65 environmental class.

ODU Thermal Resistance: Thermal resistance 0.5°C/W.

Solar heat gain: Not exceeding 5°C.

Wind load: < 200 Km/h.

ASN15 TECHNICAL SPECIFICATION Version 1

SIAE MICROELETTRONICA S.p.A. Proprietary and Confidential. All rights reserved. The copyright of this document is the property of SIAE MICROELETTRONICA S.p.A. No Date Page
part of this document may be copied, reprinted or reproduced in any material form, whether wholly or in part, without the written consent of SIAE MICROELETTRONICA
S.p.A. Further, the contents of this document or the methods or techniques contained therein must not be disclosed to any person. 22/06/2011 13 of 13