Infographic Designer Quick Start

Infographic Designer is a Power BI custom visual to provide infographic presentation of data. For
example, using Infographic Designer, you can create pictographic style column charts or bar
charts as shown in Fig. 1. Unlike standard column charts or bar charts, they use a single icon or
stacked multiple icons to constitute a column or bar.

Icons convey the data concepts in concrete objects, and the size and number of icons can
represent data quantities intuitively. Research reveals that such infographics can improve the
effectiveness of visualizations by making data quickly understood and easily remembered. As a
result, they are getting popular and have been widely adopted in the real world.

Now with Infographic Designer, you are able to create infographic visuals in Power BI easily.

(A) (B)

(C) (D)

Fig. 1. Example infographics created by Infographic Designer

Overview

Infographic Designer visual is structured as a small multiple, where each individual view is a
chart of a particular chart type (Fig. 2). Currently it supports column chart, bar chart, and card
chart. More chart types (line chart, scatter chart, etc.) will be added in the future. In Fig. 2, A is a
small multiple of card chart, and B is a small multiple of column chart. As a special case, when a
small multiple comes to 1X1, it is identical to a single chart (see the charts in Fig. 1).

(A)

(B)

Fig. 2. Infographic Designer small multiples

For the individual views of the small multiple, Infographic Designer allows you to customize the
chart marks to achieve beautiful, readable, and friendly visualizations. Marks are the graphics to
represent individual data points on a chart. Standard column charts or bar charts use rectangle
as chart mark. In Infographic Designer, you can replace it with more rich and more compelling
visual elements.

In report Editing View, when hovering mouse over a Infographic Designer visual, you will notice
there is a “Edit Mark” button on the top-left corner (Fig. 3A). Click this button to bring up the
Mark Designer pane (Fig. 3B) docked to the right side of the visual, where you can edit the chart
mark. As the Mark Designer occupies some space within the visual, it is recommended that you
open the visual in the Focus mode to edit its marks when its size is not large enough.

(A)

(B)

Fig. 3. Open the Mark Designer to edit chart mark

A chart mark is composed with one or multiple visual elements. Infographic Designer supports
three kinds of visual elements:

 Shape (Icon)
A shape or icon is essentially a SVG path. Infographic Designer provides a set of built-in
shapes, which are organized into several categories. You are also allowed to upload an
icon from a SVG file.
 Image
Images uploaded from image files are supported, including both raster images
(.PNG, .JPEG, .BMP, etc.) and vector images (.SVG).
 Text
Single-line text boxes can be added to a mark.

In the Mark Deisgner, you can add or remove different visual elements to compose a chart mark.
For each element, you specify its format and layout properties as appropriate to make your mark
compelling.

For a shape (icon) or image element, you can choose to display it in either single unit or multiple
units. When using single unit, only one shape or image is presented; otherwise, multiple shapes
or images are stacked in a grid.

For example, in Fig. 1B, the column mark is customized as a composition of a shape element and
a text element, where the shape element is shown in single unit with various icon heights
representing differnet measure values of corresponding data points on the chart. The icons in
Fig. 1C are also in single unit. Each icon are in same size, but with different highlighted portions.
The heights of highlighted portions represent the corresponding measure values. In Fig. 1A and
Fig. 1D, the icons are used in multiple units. You can compare the measure values of different
data points based on the length or percentage of highlighted portion in multiple units.

Infographic Designer supports data-binding for some element attributes. For example, as shown
in Fig. 1D and Fig. 2B, you can assign different icons for each value in Category dimension. In
Fig. 2A, different colors are specified based on the dimension values. Infographic Designer only
supports binding to categorical fields (dimensions) currently. Data-binding of numerical fields
(measures) will be added in the future.

Infographic Designer visuals work well with other Power BI visuals on the same report or
dashboard. Upon the selection from other visuals, Infographic Designer will update with data
filtered accordingly. On the other hand, you can select one or more data points in Infographic
Designer by clicking on corresponding marks (press Ctrl to select more) to filter or highlight
other Power BI visuals.
Configure Small Multiple

You can specify small multiple settings in the Visualization Pane.

Arrangement
The arrangement of a small multiple is determined upon:

 Row Dimensions: a set of dimensions to define the categories used to split the small
multiple vertically.

 Column Dimensions: a set of dimensions to define the categories used to split the
small multiple horizontally.

The Row Dimensions could be empty. In that case, the small multiple only has one row. The
Column Dimensions could be empty too. In that case, the small multiple only has one column.

For the small multiple in Fig. 2A, it has no row dimensions, and one column dimension
Category. For the one in Fig. 2B, it has one row dimension FiscalMonth, and one column
dimension Territory.

Fig. 4 shows the settings UI for assigning Row Dimensions and Column Dimensions; as well as
the data fields used in the individual charts.

(A) Chart Fields:

fields and their roles used in the individual charts

(B) Column By:

fields used as Column Dimensions of small multiple

(C) Row By:

fields used as row dimensions of small multiple

Fig. 4. Field settings of Infographic Designer visual

When clicking to select a field in the Fields Pane, Infographic Designer will automatically assign a
role for this field. You can also drag a field from the Fields Pane to a specific setting area in Fig. 4
as you need, or move a field between the Row By list, the Column By list, and the Chart Fields
area by drag-and-drop to modify the field settings of a Infographic Designer visual.

For example, the Infographic Designer visual in Fig. 5A is a single column chart. By dragging the
field Territory and moving it to the Column By list, the visual is changed to a small multiple of
card charts accordingly, as shown in Fig. 5B.

(A)

(B)

Fig. 5. Infographic Designer visual changed with field setting changes

Layout
Infographic Designer provides two layout modes for placing individual charts within a small-
multiple row:

 Flow mode
Charts belonging to a small-multiple row can be placed on multiple lines. When the
number of charts exceeds a pre-defined limit a line, new charts will be flowed to a new
line. Fig. 2A is an example of small multiples in flow mode, where each line is maximized
to 4 charts.
 Matrix mode
All charts belonging to a small-multiple row are placed on a single line. The small multiple
shown in Fig. 2B is laid out as matrix.

Fig. 6 shows the layout settings UI for the small multiple. You can choose the layout mode from
the Layout Mode list box. For flow mode, you can use the Max Row Width edit box to specify
how many charts can be contained in a line. You can determine whether to show the row and
column headers by selecting the On/Off of the Show Header option, and whether to show the
sperators by selecting the On/Off of the Show Seperators option.

(A) Flow mode (B) Matrix mode

Fig. 6. Small multiple layout settings

 Chart Formatting
In the Visualizations pane, select Format tab and expand the options for chart formatting as
shown in Fig. 7.

You can select the chart type as you need from the Type list
box. Available chart types depend on the data fields you
have assigned.

You can format your chart axes. For example, for a column
chart or bar chart, you are able to show or hide X-Axis, Y-
Axis, and grid lines by toggling corresponding options in the
UI.

You can modify the gaps between the chart area and the
boundary of corresponding small multiple region by
specifying proper padding values in the Top Padding,
Bottom Padding, Left Padding, and Right Padding edit boxes.
Fig. 8 gives an illustration of these paddings.

Fig. 7. Chart format settings

Fig. 8.
Illustration of
chart paddings
Customize Chart Marks

Mark Designer UI
As you see from Fig. 9, the Mark Designer pane can be divided into three areas: Toolbar,
Preview, and Format/Layout.

<- Toolbar

<- Preview

<- Format/Layout

Fig. 9. Mark Designer pane

The Toolbar area contains UI controls for managing elements on the mark. Specificlly, from left
to right, there are:

(1) a button to insert a shape (icon) element;

(2) a button to insert a text element;
(3) a button to insert an image element;
(4) a list box of all elements, from which you can select one as current element;
(5) a button to adjust the z-order of the selected element;
(6) a button to delete the selected element; and
(7) a button to toggle showing all elements or only showing the selected one in the preview.
The Preview area provides a preview of the mark. The frame of mark bounds is shown in gray
line, and the bound of the selected element is highlighted with dot line. You can click on an
element to select it.

The Format/Layout area is the place for you to edit the current element (the selected one). You
can view and modify its format settings by clicking the Format tab, or its layout settings by
clicking the Layout tab.

Insert New Elements

When clicking the button to insert a new shape (icon) element, an Icon Selection dialog will pop
up (see Fig. 10). In this dialog, you can select an icon from the built-in icon library, or click the
Upload button to load a new one from a SVG file.

As shown in Fig. 10, the built-in icons

are orgainized as several categories,
and each category is listed in a
corresponding tab in the dialog. The
uploaded icons will be added to a
special tab named as “Uploaded”,
which is the last tab. Select one icon
(either built-in one or uploaded one),
and click to add it to the mark.

To add a new image element,

similarly you need to select an image
from the Image Selection dialog.
Fig. 10. Icon Selection dialog
There is no built-in image library so
far, so you are required to click the
Upload button to load images from external image files. The uploaded images appear in
“Uploaded” tab, the only tab in the dialog. Select one and click to add it to the mark.

Adding a new text element is simple. Just click the corresponding button, a new text element will
be added to the mark with default settings.

Edit Element Formats

You can view and modify the formats of current element in the Format tab. As you see from Fig.
11, different element types have different format settings.

For a text element, you can edit the text content, and specify various properties regarding to
appearance of the text, including text color, font, font size, and horizontal and vertical alignment.
Format settings for a shape element and an image element are similar, including:

- modify the element content by selecting a different shape or image

- select to render the shape or image in single unit or multiple units
- for multiple units, specify the arrangement of unit rows and columns
- highlight the percentage of a selected measure field

(C) Text

(A) Shape (B) Image

Fig. 11. Element formats

Multiple Units Arrangement

For a shape or image element, turn Multiple Units option to “On” if you want to render it in
multiple units. Multiple units will be arranged as a matrix, so you need to specify how many units
will be placed along the row and column directions. Infographic Designer provides two
properties for you to set rows and columns (see Fig. 12 for an illustration):

- For Card chart and Column chart: Row Count and Units Per Row
- For Bar chart: Column Count and Units Per Column

For each property, Infographic Designer allows you to specify it as a number or “Auto”. For
specifying a number, select the corresponding slider to set it as “Custom”, and input a number in
the edit box. For specifying “Auto”, just select the corresponding slider to set it as “Auto”. See
the examples in Fig. 11.
When one property is set as “Auto”, Infographic Designer will automatically calculate the
numbers for you to well fit the units.

(A) Card chart (B) Column chart

(C) Bar chart

Fig. 12. Rows and columns for multiple units

Fill Percentage
For a shape or image element, you can assign a measure to it by selecting a measure field from
the Fill Percentage list box. Select “none” from the listbox if you want to remove such binding.
When assigned a measure, no matter in single unit or multiple units, a shape or image element
will highlight the percentage of the measure value of current data point according to the max
measure value on the chart, using two colors.

As shown in Fig. 13, for a shape, you can specify a Value Color and a Non-Value Color to fill the
shape into two parts. The percentage of the Value Color part gives you an understanding how
current value compares to the max value.

Image element is similar. You can specify a Value Tint and a Non-Value Tint to tint two parts to
show the percentage of current value according to the max value.

Fig. 13. Fill percentage with two colors

Data Binding
For each property that supports data binding, you will see a corresponding data-binding button
on the right side of the property setting UI (Fig. 14A). The data-binding button uses different
images to indicate whether the data binding is set or not (Fig. 14B).

data-binding OFF
(data-binding is not set)

data-binding ON
(data-binding is set)

(A) data-binding button (B) data-binding status

(C) data-binding of shape (D) data-binding of color (E) remove data-binding

Fig. 14. Data binding

Click the button to modify data binding in a sub-pane. You can select a data field to do the data
binding. For example, you can bind shapes to a field and assign different shapes for different
field values (Fig. 14C), or you can bind the color to a field and assign different colors for different
field values (Fig. 14D). If you want to remove the data binding, just select the data binding field
as none (Fig. 14E).

Click Back to apply the settings and return back to the high-level pane.

Edit Element Layout

Infographic Designer allows you to specify the position
and the size of current element in the Layout tab. As
shown in Fig. 15, the UI provides an illustration with
various icons and annotations to help you adjust the
layout parameters.

For an element, its position and size are both measured

according to the mark boundary. A mark may have
multiple boundaries. As illustrated by Fig. 16, each
column mark or bar mark has two boundaries: Inner
Bound and Outer Bound. The Inner Bound corresponds
to the values of individual data point, while the Outer
Bound corresponds to the data point with the max value
on the chart. Fig. 15. Layout UI

So first of all, you need to select a mark boundary from

the Bound to list box. The layout of current element will be calculated based on the selected
mark bound.

Fig. 16. Mark boundaries

 The element layout is determined based on below parameters:

 Top Distance, Bottom Distance, Left Distance, and Right Distance: the distance
between the top/bottom/left/right edges of the mark and the element.
 Top Lock, Bottom Lock, Left Lock, and Right Lock: whether the Top/Bottom/Left/Right
Distance should be locked or not
 Element Width and Height

On the layout illustration (see Fig. 15), the dot-line frame represents the mark boundary, while
the gray rectangle represents the element boundary.

There are 4 icons on the mark boundary to indicate Top Lock, Bottom Lock, Left Lock, and Right
Lock, respectively. You can click these icons to toggle the On/Off of corresponding locks.

There are 4 labels between the mark and the element, which annotate the values of Top
Distance, Bottom Distance, Left Distance, and Right Distance. You can click on a label to modify
the corresponding distance value, using either abosulte measurement (in pixels) or relative
measurement (in percentages of the mark bound).

There are 2 lables within the element bound, which annotate the valudes of element width and
element height. Similarly, you can click on a lable to modify the corresponding value in either
pixels or percentages of the mark bound.

By tweaking these parameters, you are able to achieve desired layout for the selected element:

Its vertical position and size are depended on Top Distance, Element Height, and Bottom
Distance. For a unlocked distance, its value will be ignored (labelled as “auto” on the UI). When
both distances are locked, the Element Height value will be ignored.

Similarly, its horizontal position and size are depended on Left Distance, Element Width, and
Right Distance. When both distances are locked, the Element Width value will be ignored.
Otherwise the unloked distance(s) will be ignored.

By default, the four distances are locked with zero values, which means that the element will be
stretched in the selected mark bound.

Please let us know your questions, suggestions, and feedback. Send us

email: [email protected]