Scribd
Upload
68 views8 pages

(Fall20) APL100 Quiz2

The summary provides the key information from the document in 3 sentences: The document is a quiz summary showing that the quiz was completed on January 19th 2021 in 35 minutes with an overall grade of 17 out of 17 (100%). It then lists the 12 questions on the quiz along with the answers provided and whether each answer was correct or not. The questions covered topics like calculating angular momentum, forces, moments of inertia, and centers of mass for various physical systems involving disks, plates, and other basic shapes. The correct answers to each multiple choice or short answer question are also provided for comparison. This concludes the 3 sentence summary of the key information from the document.

Uploaded by

Rishit Jakharia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
68 views8 pages

(Fall20) APL100 Quiz2

The summary provides the key information from the document in 3 sentences: The document is a quiz summary showing that the quiz was completed on January 19th 2021 in 35 minutes with an overall grade of 17 out of 17 (100%). It then lists the 12 questions on the quiz along with the answers provided and whether each answer was correct or not. The questions covered topics like calculating angular momentum, forces, moments of inertia, and centers of mass for various physical systems involving disks, plates, and other basic shapes. The correct answers to each multiple choice or short answer question are also provided for comparison. This concludes the 3 sentence summary of the key information from the document.

Uploaded by

Rishit Jakharia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Dashboard ▶ My courses ▶ 2001-APL100A ▶ 13 January - 19 January ▶ QUIZ 2

Started on Tuesday, 19 January 2021, 7:00 PM


State Finished
Completed on Tuesday, 19 January 2021, 7:36 PM
Time taken 35 mins 17 secs
Grade 17.00 out of 17.00 (100%)

Question 1 A circular disk as shown in the figure, is rotating with an angular velocity ω = 2 rad/s, a
Correct particle of mass m=1.4 kg is put in a radial groove, the mass m moves with a radially
outward velocity of V=1 m/s.
Mark 2.00 out of
2.00

Calculate the magnitude of angular momentum of the particle m (with respect to inertial
reference frame) about the center of the disk, when the mass is at a distance d=0.9 m
from the center. 

Answer: 2.268

The correct answer is: 2.27

Question 2 Consider a co-planar force system in the x-y plane (i.e. line of action of forces acting on
Correct object are in same plane, while couples are perpendicular to this plane). At point x=0, y=0,
the net moment along z is 10 N.m while at point x=4, y=0, the net moment acting along z is
Mark 1.00 out of
20 N.m. No moment acts at x=4, y=3. Absolute value of the resultant force, \( \lvert
1.00
\vec{F}_R \rvert \), is  7.12 N.

The correct answer is: 7.12


Question 3 A disk of mass m=757.0 kg and radius r=0.4 m is rolling without slip with angular velocity \(
Correct \omega \)= 2.7 rad/s. 

Mark 2.00 out of


2.00

Calculate the magnitude of angular momentum about point E    490.54 . 

The correct answer is: 490.54

Question 4 A line force distribution is given by \( \vec{f_s}(x) = x \hat{j} \) m for \( x \in \) [0, 4] m and \(
Correct \vec{f_s}(x) = 4  \hat{j} \) N for \( x \in \) [4,  2*4] m. The x coordinate of the resultant force

Mark 1.00 out of is \( x_R \)= 4.89 m


1.00

The correct answer is: 4.89


Question 5 o
The massless triangular plate ABC (angle BAC=90 ) is supported at A by a smooth hinge,
Correct and at B by a smooth hinge on roller. Dimensions of the plate are given by H=3 m and L=6
Mark 1.00 out of m. A weight W=128 N hangs at C. Absolute value of reaction force at A, \( \lvert \vec{R}_A
1.00 \rvert \), is 286.22 N . 

Assume that the system is 2D (two-dimensional).

The correct answer is: 286.22

Question 6 An object rotates around the z axis with angular velocity \( \omega \) . The axis of rotation
Correct passes through center of mass C of the object. The diagonal components of moments of
2 2
inertia matrix [I] of the object around C are \( I_{xx} \)=1 kg.m  , \( I_{yy} \)= 2 kg.m  and \(
Mark 2.00 out of 2
I_{zz} \)=3 kg.m  . The  x-z plane (y=0) is a material symmetry plane. \( \vec{{H}_{C | I}} \) is
2.00
the angular momentum vector of the object around C with respect to the inertial
frame I. It is given that \( \lvert \vec{H}_{C | I} \rvert = 10 kg.m^2/s \) and \( \vec{{H}_{C | I}}
2 
\cdot \hat{k} =6 kg.m^2/s \). Value of \( \lvert {I}_{xz} \rvert \) is 4 kg.m  .

The correct answer is: 4.00


Question 7 In the given T shaped geometry, find the location of the Centre of Mass in the vertical
Correct direction (\( \hat{j} \)) from the point O i.e., the mid-point of the base.

Mark 1.00 out of Take "a" =12 units. 


1.00

Answer: 10.67

The correct answer is: 10.67


Question 8
A thin bent beam, ABC, is being pushed against the wall with a horizontal force P towards
Correct the right, applied at the mid-point of A and B. Here \( l= \)1 m. The coefficient of static
Mark 2.00 out of friction between the beam and the ground at A is \( \mu_s \)=0.11, while \( \mu_s \)=0 at
2.00 C(i.e. the wall is smooth). Given that the uniformly distributed mass per unit length of the
beam is \( \lambda \)=16 kg/m, minimum force P required to keep the beam ABC in
equilibrium is  87.81 N.        Assume that gravity (g=9.8 m/s2) acts downwards

and that no reaction couples are present at A,C.

The correct answer is: 87.81

Question 9 A thin plate is undergoing pure translation in the z=0 plane. The dimension of the plate is \(
Correct H= \)1m along y direction and \( L= \)3 m along x direction, and mass of plate is \( m= \)10
kg. Forces FA and FB act at points A and B at an angle of \( \pi/4 \) with respect to x axis
Mark 2.00 out of
(i.e. parallel to line x=y), while force FC acts along the x direction at the center of mass of
2.00
the plate, C. If the acceleration of C is \( \vec{a_C} = \)3*\( \frac{\hat{i}+\hat{j}}{ \sqrt{2} } \)
2
m/s , value of\( \lvert \vec{F}_A \rvert \) is 30 N.   Note, sign of FA , FB and 

FC can be -ve or +ve. Neglect gravity at the end.

The correct answer is: 30.00


Question 10 𝑰 is an inertial frame. O is a given point in the frame. Given for a body \( \dot{\vec{p}}_{|
Correct m}= \vec{F} \), \( \dot{\vec{H}}_{O| m}= M_O \), then which of the following cannot be true
for Frame m.
Mark 1.00 out of
1.00 Note: This question can have more than one correct answer

Select one or more:


translating with uniform acceleration w.r.t \( I \).

is translating with uniform velocity w.r.t \( I \).

rotating with uniform angular velocity w.r.t \( I \).

is stationary w.r.t \( I \).

The correct answers are: translating with uniform acceleration w.r.t \( I \).

, rotating with uniform angular velocity w.r.t \( I \).


Question 11 If  Ixy<0 for a 2D body, then which CANNOT be a correct shape among the following. In
Correct every quadrant in the figure, blocks of equal area and uniform density are there.

Mark 1.00 out of


Select one:
1.00

All of the above

The correct answer is: All of the above


Question 12 Calculate the moment of inertia matrix of the following figure, about the CM, w.r.t x-y-z axis
Correct

Mark 1.00 out of


1.00

Select one:
\( I_{xx}^C=I_{yy}^C=m ( \frac{R^2}{4} + \frac{L^2}{12} ) ,I_{zz}^C= \frac{mR^2}{2} \)

\( I_{xx}^C=I_{yy}^C= \frac{mL^2}{12} ,I_{zz}^C= \frac{mR^2}{2} \)

None of the given choices

\( I_{xx}^C=I_{yy}^C=\frac{mR^2}{4} ,I_{zz}^C= \frac{mR^2}{2} \)

The correct answer is: \( I_{xx}^C=I_{yy}^C=m ( \frac{R^2}{4} + \frac{L^2}{12} ) ,I_{zz}^C=


\frac{mR^2}{2} \)

◀ Tutorial 8A solution
Jump to...
Class 16 ▶

You might also like