DELTA PACIFIC VALVE

API 600 Cast Steel Valves

Delta Pacific Valve Mfg. Co.

New York, U.S.A.
 API 600 CAST STEEL VALVES
TABLE OF CONTENTS
Page Title Page Title
1 Table of Contents / How To Order 16 Optional Modifications & Auxiliary Connections
2 Company Introduction 17 End Flange Dimensions ANSI Class 150
3 Gate Valve Design Features 18 End Flange Dimensions ANSI Class 300
4 Gate Valve Materials of Construction 19 End Flange Dimensions ANSI Class 600
5 Gate Valve ANSI Class 150 and 300 20 End Flange Dimensions ANSI Class 900
6 Gate Valve ANSI Class 600 to 1500 21 End Flange Dimensions ANSI Class 1500
7 Globe Valve Design Features 22 Pressure-Temp. Ratings ANSI Class 150
8 Globe Valve Materials of Construction 23 Pressure-Temp. Ratings ANSI Class 300
9 Globe Valve ANSI Class 150 and 300 24 Pressure-Temp. Ratings ANSI Class 600
10 Globe Valve ANSI Class 600 to 1500 25 Pressure-Temp. Ratings ANSI Class 900
11 Check Valve Design Features 26 Pressure-Temp. Ratings ANSI Class 1500
12 Check Valve Materials of Construction 27 Shell Material Specifications
13 Check Valve ANSI Class 150 and 300 28 Trim Material Specifications
14 Check Valve ANSI Class 600 to 1500 29 Figure Number Comparison Chart
15 Bevel Gear Operator 30 General Terms and Conditions of Sale

HOW TO ORDER

1 5 1 2 F
ANSI Valve Shell End
Class Type Material Connections

15 = ANSI Class 150 1 = Gate, OS&Y, RS 1 = WC1 F = Flanged Ends

30 = ANSI Class 300 2 = Globe 2 = WCB B = Butt-Weld Ends
60 = ANSI Class 600 3 = Swing Check 3 = CF8M T = Threaded
90 = ANSI Class 900 3L = CF3M X = Per Customer's
150 = ANSI Class 1500 4 = CF8 Request
4L = CF3
5 = C5
6 = WC6
7 = CN7M
9 = WC9
C = LCC

Example above, namely DPV Fig. 1512F = ANSI Class 150 Gate Valve, Outside Screw and Yoke,
Rising Stem Design, in Cast Carbon Steel ASTM
A216 Grade WCB Shell Material with Flanged Ends

1 DELTA PACIFIC VALVE MFG. CO.

 API 600 CAST STEEL VALVES

COMPANY INTRODUCTION
Delta Pacific Valve Manufacturing Company

Consistent product quality and availability of substantial stocks makes DPV® a dependable
choice for API 600 cast steel gate, globe, and check valves where total reliability is of the
utmost concern.

DPV® manufactures valves to industry standard specifications, or to customer specified

requirements, both promptly and economically.

DPV® maintains an extensive quality system which complies with the requirements of major
oil companies, industry standards and to the ISO 9000 standard.

DPV® cast steel valves are manufactured in compliance with the requirements of API 600
and pressure tested in accordance with API 598 standard.

Materials of construction include the ASTM A216 and ASTM A352 range of carbon steels,
the ASTM A217 range of alloy steels and the ASTM A351 range of corrosion-resistant steels;
the pressure containing components being of high integrity castings.

All DPV® gate and globe valves can be easily adapted for actuation to most makes of
actuators or to suit customer specifications.

Environmentally Friendly Valves

In concert with customers' continual efforts to both reduce the cost of ownership and comply
with local environmental requirements, DPV® now manufactures a range of low emission
valves offering minimum leakage and maximum service life in the stem sealing and bonnet
joint areas.

Testing and evaluation criteria is based on EPA method 21, and emission rates lower than
500 ppm during operation are standard for this range of gate, globe and check valves.

DPV® is an internationally registered trademark of D.P.S.I., New York, U.S.A.

DELTA PACIFIC VALVE MFG CO 2

 GATE VALVES

GATE VALVE DESIGN FEATURES

u Plain or One-Piece Flexible Solid Wedge u Design : API 600 / API 6D / BS 1414
u Bolted Bonnet Construction u Shell Thickness : API 600 / API 6D / BS 1414
u Outside Screw and Yoke u Flanged Ends : ANSI B16.5 (Sizes ≤ 24")
u Non-Rotating, Rising Stem MSS SP-44 (Sizes > 24")
u Manual Operated, Actuation Available API 605 (Sizes > 24")
u Renewable Threaded-In Backseat Bushing u Face-to-Face : ANSI B16.10 / API 6D
u Renewable Threaded-In or Welded-In Seat Rings u Testing : API 598 / BS 6755 Part 1

Typical Construction No. Part Name

1 Body
2 Bonnet
3 Wedge Disc
4 Seat Ring
5 Stem
6 Backseat Bushing
7 Gland Bushing
8 Gland Flange
9 Packing
10 Gasket
11 Yoke Sleeve
12 Retainer Nut
13 Handwheel
14 Handwheel Nut
15 / 16 Stud Bolt / Hex Nut
17 Eyebolt
18 Pin
19 Hex Nut
21 Grease Fitting
Note: Weld end valves available upon request

u Heavy duty BODY with full port dia. and shell u RISING STEM for open/close position indication
thickness to API / BS standards (where applicable) u Austenitic ductile iron YOKE SLEEVE to provide
u SEAT RINGS and WEDGE DISC ground and lapped resistance to heat, corrosion and wear
to a mirror finish to provide matching sealing surfaces u Two piece self-aligning GLAND BUSHING and
u WEDGE DISC fully guided and precision fitted to GLAND FLANGE to prevent stem damage
ensure tight sealing performance u High strength alloy steel STUD BOLTS and
u Heat treaded stainless steel STEM with precision heavy series HEX NUTS used
machined ACME threads for long-lasting service u Large diameter HANDWHEEL for easy operation
u Machined BACKSEAT BUSHING to provide a u Grease fitting for YOKE SLEEVE lubrication to
secondary metal-to-metal stem seal minimize operating torque & stem wear

3 DELTA PACIFIC VALVE MFG CO

 GATE VALVES

STANDARD MATERIALS OF CONSTRUCTION

ANSI B16.34 Material Group
Part Carbon Steel C-Mn Steel Alloy Steel
1.1 1.2 1.9 1.10 1.13
Body / Bonnet A216 Gr. WCB A352 Gr. LCC A217 Gr. WC6 A217 Gr. WC9 A217 Gr. C5
Gland Bushing ← 13% Chromium ASTM A182 Gr. F6a →
Stud Bolts & Hex Nuts B7 / 2H L7 / 7 ← ASTM A193 Gr. B16 / ASTM A194 Gr. 2H →
Yoke / Gland Flange ← Carbon Steel →
Yoke Sleeve ← Austenitic Ductile Iron ASTM A439 Type D2 →
Retainer Nut ← Carbon Steel →
Handwheel ← Ductile / Malleable Iron →
Handwheel Nut ← Carbon Steel →
Gland Eyebolts & Nuts ← Carbon Steel ASTM A307 Gr. B →
Corrosion Resistant Steel
Part
2.1 2.2 3.17
Body / Bonnet A351 Gr. CF8 A351 Gr. CF3 A351 Gr. CF8M A351 Gr. CF3M A351 Gr. CN7M
Gland Bushing 304SS 304L SS 316SS 316L SS Alloy 20
Stud Bolts & Hex Nuts ← Corrosion Resistant Steel ASTM A193 Gr. B8 / A194 Gr. 8 →
Yoke / Gland Flange ← Corrosion Resistant Steel →
Yoke Sleeve ← Austenitic Ductile Iron ASTM A439 Type D2 →
Retainer Nut ← Carbon Steel →
Handwheel ← Ductile / Malleable Iron →
Handwheel Nut ← Carbon Steel →
Gland Eyebolts & Nuts ← Corrosion Resistant Steel ASTM A193 Gr. B8 / ASTM A194 Gr. 8 →
Note: Other materials available upon request.

Trim Materials
API Trim No.
Part
1 2 5 8 9 10 11 12 13 14 15
Wedge Disc F6 304SS HF F6 Ni-Cu 316SS Ni-Cu 316SS Alloy 20 Alloy 20 HF
Seat Ring F6 304SS HF HF Ni-Cu 316SS HF HF Alloy 20 HF HF
Stem F6 304SS F6 F6 Ni-Cu 316SS Ni-Cu 316SS Alloy 20 Alloy 20 304SS
Backseat F6 304SS F6 F6 Ni-Cu 316SS Ni-Cu 316SS Alloy 20 Alloy 20 304SS
API Trim No. DPV Trim No.
Part
16 17 18 A B C D E F G H
Wedge Disc HF HF HF HF Bronze F6 304SS 316SS Ni-Cu Alloy 20 Bronze
Seat Ring HF HF HF HF Bronze PTFE PTFE PTFE PTFE PTFE PTFE
Stem 316SS 347SS Alloy 20 Ni-Cu Brass F6 304SS 316SS Ni-Cu Alloy 20 Brass
Backseat 316SS 347SS Alloy 20 Ni-Cu Brass F6 304SS 316SS Ni-Cu Alloy 20 Brass
Note: Trim will be supplied either as a base material equal to body with overlay or solid trim at manufacturer's option.

DELTA PACIFIC VALVE MFG CO 4

 GATE VALVES

DIMENSIONS
ANSI Class 150
Dimensions (mm) Approx. Wt.
Size
L H W ( lb. ) ( kg. )
2" 178 388 200 40 18
2½" 191 444 200 54 25
3" 203 497 250 82 37
4" 229 585 250 119 54
5" 254 677 300 157 71
6" 267 765 350 194 88
8" 292 964 350 318 144
10" 330 1,155 400 434 197
12" 356 1,386 450 657 298
14" 381 1,535 500 895 406
16" 406 1,811 600 1,155 524
18" 432 2,009 600 1,588 720
20" 457 2,230 680 2,007 910
24" 508 2,641 760 2,492 1,130
26" 559 2,775 800 3,142 1,425
28" 610 2,825 800 3,418 1,550
30" 610 3,175 800 4,300 1,950
36" 711 3,600 800 6,725 3,050

ANSI Class 300

Dimensions (mm) Approx. Wt.
Size
L H W ( lb. ) ( kg. )
2" 216 424 200 53 24
2½" 241 460 250 96 44
DPV Figure Numbers 3" 283 535 250 117 53
ANSI Class 4" 305 615 250 168 76
Material
150 300 5" 381 770 300 203 92
A216 Gr. WCB 1512F 3012F 6" 403 795 350 322 146
A352 Gr. LCC 151CF 301CF 8" 419 1,012 400 481 218
A217 Gr. WC6 1516F 3016F 10" 457 1,231 450 776 352
A217 Gr. WC9 1519F 3019F 12" 502 1,450 550 1,041 472
A217 Gr. C5 1515F 3015F 14" 762 1,645 600 1,530 694
A351 Gr. CF8 1514F 3014F 16" 838 1,845 600 2,315 1,050
A351 Gr. CF3 1514LF 3014LF 18" 914 1,995 680 2,977 1,350
A351 Gr. CF8M 1513F 3013F 20" 991 2,208 750 3,649 1,655
A351 Gr. CF3M 1513LF 3013LF 24" 1,143 2,650 800 5,182 2,350
A351 Gr. CN7M 1517F 3017F 30" 1,397 3,270 800 9,041 4,100

5 DELTA PACIFIC VALVE MFG CO

 GATE VALVES

DIMENSIONS
ANSI Class 600
Dimensions (mm) Approx. Wt.
Size
L H W ( lb. ) ( kg. )
2" 292 458 250 101 46
2½" 330 508 250 121 55
3" 356 570 250 159 72
4" 432 690 350 282 128
5" 508 880 400 397 180
6" 559 910 450 587 266
8" 660 1,064 500 924 419
10" 787 1,390 600 1,610 730
12" 838 1,650 680 1,874 850
14" 889 1,655 750 2,867 1,300
16" 991 1,905 750 3,859 1,750

ANSI Class 900

Dimensions (mm) Approx. Wt.
Size
L H W ( lb. ) ( kg. )
2" 368 445 300 187 85
3" 381 595 350 276 125
4" 457 750 400 397 180
6" 610 865 500 684 310
8" 737 1,225 600 1,158 525
10" 838 1,450 750 2,150 975
12" 965 1,675 800 3,197 1,450
14" 1,029 1,680 800 4,190 1,900
16" 1,130 1,925 800 5,634 2,555
DPV Figure Numbers
ANSI Class 1500 ANSI Class
Material
Dimensions (mm) Approx. Wt. 600 900 1500
Size
L H W ( lb. ) ( kg. ) A216 Gr. WCB 6012F 9012F 15012F
2" 368 475 400 243 110 A352 Gr. LCC 601CF 901CF 1501CF
3" 470 600 400 320 145 A217 Gr. WC6 6016F 9016F 15016F
4" 546 775 500 485 220 A217 Gr. WC9 6019F 9019F 15019F
6" 705 925 600 889 403 A217 Gr. C5 6015F 9015F 15015F
8" 832 1,250 750 1,566 710 A351 Gr. CF8 6014F 9014F 15014F
10" 991 1,525 800 2,977 1,350 A351 Gr. CF3 6014LF 9014LF 15014LF
12" 1,130 1,725 800 5,072 2,300 A351 Gr. CF8M 6013F 9013F 15013F
14" 1,257 1,750 800 6,836 3,100 A351 Gr. CF3M 6013LF 9013LF 15013LF
16" 1,384 1,950 800 7,883 3,575 A351 Gr. CN7M 6017F 9017F 15017F

DELTA PACIFIC VALVE MFG CO 6

 GLOBE VALVES

GLOBE VALVE DESIGN FEATURES

u Swivel Plug Disc Design Standard u Design : BS 1873 / API 600
u Flat and Regulating Type Disc Available u Shell Thickness : BS 1873 / API 600
u Bolted Bonnet Construction u Flanged Ends : ANSI B16.5 (Sizes ≤ 24")
u Outside Screw and Yoke, Rising Stem MSS SP-44 (Sizes > 24")
u Manual Operated, Actuation Available API 605 (Sizes > 24")
u Renewable Threaded-In Backseat Bushing u Face-to-Face : ANSI B16.10
u Renewable Threaded-In or Welded-In Seat Ring u Testing : API 598 / BS 6755 Part 1

Typical Construction No. Part Name

1 Body
2 Bonnet
3 Disc
4 Seat Ring
5 Stem
6 Backseat Bushing
7 Gland Bushing
8 Gland Flange
9 Packing
10 Gasket
11 Yoke Bushing
13 Handwheel
14 Handwheel Nut
15 / 16 Stud Bolt / Hex Nut
17 Eyebolt
18 Pin
19 Hex Nut
27 / 28 Disc Washer / Nut
29 Washer
Note: Weld end valves available upon request

u Heavy duty BODY with shell thickness to API / BS u RISING STEM for open/close position indication
standards (where applicable) u Austenitic ductile iron YOKE SLEEVE to provide
u SEAT RING and WEDGE DISC ground and lapped resistance to heat, corrosion and wear
to a mirror finish to provide matching sealing surfaces u Two piece self-aligning GLAND BUSHING and
u Plug Type DISC supplied as standard. Flat and GLAND FLANGE to prevent stem damage
Regulating Type DISC available upon request. u High strength alloy steel STUD BOLTS and
u Heat treaded stainless steel STEM with precision heavy series HEX NUTS used
machined ACME threads for long-lasting service u Large diameter HANDWHEEL for easy operation
u Machined BACKSEAT BUSHING to provide a u Optional Deep Stuffing Box with Lantern Ring
secondary metal-to-metal stem seal u Angle and Y Body Patterns available

7 DELTA PACIFIC VALVE MFG CO

 GLOBE VALVES

STANDARD MATERIALS OF CONSTRUCTION

ANSI B16.34 Material Group
Part Carbon Steel C-Mn Steel Alloy Steel
1.1 1.2 1.9 1.10 1.13
Body / Bonnet A216 Gr. WCB A352 Gr. LCC A217 Gr. WC6 A217 Gr. WC9 A217 Gr. C5
Gland Bushing ← 13% Chromium ASTM A182 Gr. F6a →
Stud Bolts & Hex Nuts B7 / 2H L7 / 7 ← ASTM A193 Gr. B16 / ASTM A194 Gr. 2H →
Yoke / Gland Flange ← Carbon Steel →
Yoke Bushing ← Austenitic Ductile Iron ASTM A439 Type D2 →
Handwheel ← Ductile / Malleable Iron →
Handwheel Nut ← Carbon Steel →
Gland Eyebolts & Nuts ← Carbon Steel ASTM A307 Gr. B →
Corrosion Resistant Steel
Part
2.1 2.2 3.17
Body / Bonnet A351 Gr. CF8 A351 Gr. CF3 A351 Gr. CF8M A351 Gr. CF3M A351 Gr. CN7M
Gland Bushing 304SS 304L SS 316SS 316L SS Alloy 20
Stud Bolts & Hex Nuts ← Corrosion Resistant Steel ASTM A193 Gr. B8 / ASTM A194 Gr. 8 →
Yoke / Gland Flange ← Corrosion Resistant Steel →
Yoke Bushing ← Austenitic Ductile Iron ASTM A439 Type D2 →
Handwheel ← Ductile / Malleable Iron →
Handwheel Nut ← Carbon Steel →
Gland Eyebolts & Nuts ← Corrosion Resistant Steel ASTM A193 Gr. B8 / ASTM A194 Gr. 8 →
Note: Other materials available upon request.

Trim Materials
API Trim No.
Part
1 2 5 8 9 10 11 12 13 14 15
Disc F6 304SS HF F6 Ni-Cu 316SS Ni-Cu 316SS Alloy 20 Alloy 20 HF
Seat Ring F6 304SS HF HF Ni-Cu 316SS HF HF Alloy 20 HF HF
Stem F6 304SS F6 F6 Ni-Cu 316SS Ni-Cu 316SS Alloy 20 Alloy 20 304SS
Backseat F6 304SS F6 F6 Ni-Cu 316SS Ni-Cu 316SS Alloy 20 Alloy 20 304SS
Washer / Nut F6 304SS F6 F6 Ni-Cu 316SS Ni-Cu 316SS Alloy 20 Alloy 20 304SS
API Trim No. DPV Trim No.
Part
16 17 18 A B C D E F G H
Disc HF HF HF HF Bronze F6 304SS 316SS Ni-Cu Alloy 20 Bronze
Seat Ring HF HF HF HF Bronze PTFE PTFE PTFE PTFE PTFE PTFE
Stem 316SS 347SS Alloy 20 Ni-Cu Brass F6 304SS 316SS Ni-Cu Alloy 20 Brass
Backseat 316SS 347SS Alloy 20 Ni-Cu Brass F6 304SS 316SS Ni-Cu Alloy 20 Brass
Washer / Nut 316SS 347SS Alloy 20 Ni-Cu Brass F6 304SS 316SS Ni-Cu Alloy 20 Brass
Note: Trim will be supplied either as a base material equal to body with overlay or solid trim at manufacturer's option.

DELTA PACIFIC VALVE MFG CO 8

 GLOBE VALVES

DIMENSIONS

ANSI Class 150

Dimensions (mm) Approx. Wt.
Size
L H W ( lb. ) ( kg. )
2" 203 350 200 49 22
2½" 216 403 250 66 30
3" 241 405 250 93 42
4" 292 478 350 132 60
5" 356 513 350 170 77
6" 406 555 350 214 97
8" 495 610 450 355 161
10" 622 730 500 679 308
12" 699 1,008 600 904 410
14" 787 1,200 600 1,191 540
16" 914 1,270 650 1,676 760
18" 978 1,300 650 2,315 1,050
20" 978 1,350 700 2,701 1,225
24" 1,295 1,450 750 3,638 1,650

ANSI Class 300

Dimensions (mm) Approx. Wt.
Size
L H W ( lb. ) ( kg. )
2" 267 420 200 61 28
DPV Figure Numbers 2½" 292 435 250 110 50
ANSI Class 3" 318 450 250 126 57
Material
150 300 4" 356 520 350 182 83
A216 Gr. WCB 1522F 3022F 5" 400 620 400 298 135
A352 Gr. LCC 152CF 302CF 6" 445 650 450 331 150
A217 Gr. WC6 1526F 3026F 8" 559 800 500 875 397
A217 Gr. WC9 1529F 3029F 10" 622 1,040 500 1,162 527
A217 Gr. C5 1525F 3025F 12" 711 1,140 600 1,341 608
A351 Gr. CF8 1524F 3024F 14" 838 1,250 700 1,687 765
A351 Gr. CF3 1524LF 3024LF 16" 864 1,295 750 2,426 1,100
A351 Gr. CF8M 1523F 3023F 18" 978 1,340 800 3,241 1,470
A351 Gr. CF3M 1523LF 3023LF 20" 1,016 1,385 915 3,704 1,680
A351 Gr. CN7M 1527F 3027F 24" 1,346 1,475 915 5,457 2,475

9 DELTA PACIFIC VALVE MFG CO

 GLOBE VALVES

DIMENSIONS
ANSI Class 600
Dimensions (mm) Approx. Wt.
Size
L H W ( lb. ) ( kg. )
2" 292 457 250 95 43
2½" 330 470 300 161 73
3" 356 584 350 196 89
4" 432 660 450 329 149
5" 508 820 500 463 210
6" 559 850 550 919 417
8" 660 1,050 600 1,195 542
10" 787 1,140 600 1,526 692
12" 838 1,320 750 2,150 975
14" 889 1,350 800 2,459 1,115
16" 991 1,550 800 3,263 1,480

ANSI Class 900

Dimensions (mm) Approx. Wt.
Size
L H W ( lb. ) ( kg. )
2" 368 495 300 212 96
2½" 419 540 350 174 79
3" 381 600 350 258 117
4" 457 655 500 392 178
5" 559 670 500 673 305
6" 610 780 600 783 355
8" 737 1,050 600 1,610 730
10" 838 1,300 750 2,315 1,050
12" 965 1,480 800 2,977 1,350
DPV Figure Numbers
ANSI Class 1500 ANSI Class
Material
Dimensions (mm) Approx. Wt. 600 900 1500
Size
L H W ( lb. ) ( kg. ) A216 Gr. WCB 6022F 9022F 15022F
2" 368 550 300 256 116 A352 Gr. LCC 602CF 902CF 1502CF
2½" 419 580 350 276 125 A217 Gr. WC6 6026F 9026F 15026F
3" 470 625 400 320 145 A217 Gr. WC9 6029F 9029F 15029F
4" 546 750 450 463 210 A217 Gr. C5 6025F 9025F 15025F
5" 673 810 500 871 395 A351 Gr. CF8 6024F 9024F 15024F
6" 705 925 600 1,047 475 A351 Gr. CF3 6024LF 9024LF 15024LF
8" 832 1,225 600 2,040 925 A351 Gr. CF8M 6023F 9023F 15023F
10" 991 1,450 750 3,010 1,365 A351 Gr. CF3M 6023LF 9023LF 15023LF
12" 1,130 1,870 800 4,851 2,200 A351 Gr. CN7M 6027F 9027F 15027F

DELTA PACIFIC VALVE MFG CO 10

 SWING CHECK VALVES

SWING CHECK VALVE DESIGN FEATURES

u Swing Disc Design u Design : API 6D / API 600 / BS 1868
u Regular Opening Type u Shell Thickness : API 6D / API 600 / BS 1868
u Bolted Cover Construction u Flanged Ends : ANSI B16.5 (Sizes ≤ 24")
u Internal Hinge Design Standard MSS SP-44 (Sizes > 24")
u Through-Body Hinge Pin Design Available API 605 (Sizes > 24")
u Renewable Threaded-In or Welded-In Seat Ring u Face-to-Face : ANSI B16.10
u Testing : API 598 / BS 6755 Part 1

Typical Construction No. Part Name

1 Body
2 Seat Ring
3 Disc
4 Hinge
5 Disc Washer
6 Disc Nut
7 Hinge Pin
8 Bracket
9 Stud Bolt
10 Hex Nut
11 Washer
13 Capscrew
14 Nameplate
15 Cover
16 Lifting Lug
Note: Weld end valves available upon request

u Heavy duty BODY with shell thickness to u Standard internal HINGE design eliminates body
API / BS standards (where applicable) penetration and allows ease of maintenance
since all parts are accessible from the top
u SEAT RING and DISC ground and lapped to a and the valve can be serviced insitu
mirror finish to provide matching sealing surfaces
u Through-body HINGE PIN design available for
u Free rotating DISC design to minimize localized outside lever, counter weight or slam retarder
wear on sealing surface
u High strength alloy steel STUD BOLTS and
u Y Body Pattern available heavy series HEX NUTS used

11 DELTA PACIFIC VALVE MFG CO

 SWING CHECK VALVES

STANDARD MATERIALS OF CONSTRUCTION

ANSI B16.34 Material Group
Part Carbon Steel C-Mn Steel Alloy Steel
1.1 1.2 1.9 1.10 1.13
Body / Cover A216 Gr. WCB A352 Gr. LCC A217 Gr. WC6 A217 Gr. WC9 A217 Gr. C5
Hinge / Bracket A216 Gr. WCB A352 Gr. LCC A217 Gr. WC6 A217 Gr. WC9 A217 Gr. C5
Stud Bolts A193 Gr. B7 A320 Gr. L7 ← Alloy Steel ASTM A193 Gr. B16 →
Hex Nuts A194 Gr. 2H A194 Gr. 7 ← Carbon Steel ASTM A194 Gr. 2H →
Washer / Capscrew ← Carbon Steel → ← Alloy Steel →
Corrosion Resistant Steel
Part
2.1 2.2 3.17
Body / Cover A351 Gr. CF8 A351 Gr. CF3 A351 Gr. CF8M A351 Gr. CF3M A351 Gr. CN7M
Hinge / Bracket A351 Gr. CF8 A351 Gr. CF3 A351 Gr. CF8M A351 Gr. CF3M A351 Gr. CN7M
Stud Bolts ← ASTM A193 Gr. B8 → ← ASTM A193 Gr. B8M →
Hex Nuts ← ASTM A194 Gr. 8 → ← ASTM A194 Gr. 8M →
Washer / Capscrew ← Corrosion Resistant Steel →
Note: Other materials available upon request.

Trim Materials
API Trim No.
Part
1 2 5 8 9 10 11 12 13 14 15
Disc F6 304SS HF F6 Ni-Cu 316SS Ni-Cu 316SS Alloy 20 Alloy 20 HF
Seat Ring F6 304SS HF HF Ni-Cu 316SS HF HF Alloy 20 HF HF
Disc Washer F6 304SS F6 F6 Ni-Cu 316SS Ni-Cu 316SS Alloy 20 Alloy 20 304SS
Disc Nut F6 304SS F6 F6 Ni-Cu 316SS Ni-Cu 316SS Alloy 20 Alloy 20 304SS
Hinge Pin F6 304SS F6 F6 Ni-Cu 316SS Ni-Cu 316SS Alloy 20 Alloy 20 304SS
API Trim No. DPV Trim No.
Part
16 17 18 A B C D E F G H
Disc HF HF HF HF Bronze F6 304SS 316SS Ni-Cu Alloy 20 Bronze
Seat Ring HF HF HF HF Bronze PTFE PTFE PTFE PTFE PTFE PTFE
Disc Washer 316SS 347SS Alloy 20 Ni-Cu Bronze F6 304SS 316SS Ni-Cu Alloy 20 Bronze
Disc Nut 316SS 347SS Alloy 20 Ni-Cu Bronze F6 304SS 316SS Ni-Cu Alloy 20 Bronze
Hinge Pin 316SS 347SS Alloy 20 Ni-Cu Bronze F6 304SS 316SS Ni-Cu Alloy 20 Bronze
Note: Trim will be supplied either as a base material equal to body with overlay or solid trim at manufacturer's option.

Gasket Materials
ANSI Class
Type
150 300 600 900 1500
S.S. Spiral Wound l l ¡ ¡ ¡
Soft Iron Ring N/A N/A l l l
l Standard ¡ Optional Other types available upon request.

DELTA PACIFIC VALVE MFG CO 12

 SWING CHECK VALVES

DIMENSIONS

ANSI Class 150

Dimensions (mm) Approx. Wt.
Size
L H D ( lb. ) ( kg. )
2" 203 156 152 42 19
2½" 216 170 178 57 26
3" 241 180 191 62 28
4" 292 213 229 105 48
5" 330 229 254 152 69
6" 356 307 279 172 78
8" 495 357 343 293 133
10" 622 390 406 587 266
12" 699 410 483 765 347
14" 787 415 533 994 451
16" 864 460 597 1,226 556
18" 978 570 635 1,738 788
20" 978 625 699 2,020 916
24" 1,295 675 813 2,811 1,275

ANSI Class 300

Dimensions (mm) Approx. Wt.
Size
L H D ( lb. ) ( kg. )
2" 267 198 165 46 21
DPV Figure Numbers 2½" 292 203 191 66 30
ANSI Class 3" 318 222 210 94 43
Material
150 300 4" 356 266 254 146 66
A216 Gr. WCB 1532F 3032F 5" 400 292 279 185 84
A352 Gr. LCC 153CF 303CF 6" 445 326 318 276 125
A217 Gr. WC6 1536F 3036F 8" 533 400 381 430 195
A217 Gr. WC9 1539F 3039F 10" 622 455 445 666 302
A217 Gr. C5 1535F 3035F 12" 711 543 521 858 389
A351 Gr. CF8 1534F 3034F 14" 838 500 584 1,433 650
A351 Gr. CF3 1534LF 3034LF 16" 864 545 648 1,764 800
A351 Gr. CF8M 1533F 3033F 18" 978 605 711 2,139 970
A351 Gr. CF3M 1533LF 3033LF 20" 1,016 675 775 2,977 1,350
A351 Gr. CN7M 1537F 3037F 24" 1,346 785 914 4,873 2,210

13 DELTA PACIFIC VALVE MFG CO

 SWING CHECK VALVES

DIMENSIONS
ANSI Class 600
Dimensions (mm) Approx. Wt.
Size
L H D ( lb. ) ( kg. )
2" 292 224 165 76 34
2½" 330 245 191 139 63
3" 356 278 210 165 75
4" 432 307 273 212 96
5" 508 498 330 355 161
6" 559 394 356 501 227
8" 660 468 419 763 346
10" 787 554 508 1,202 545
12" 838 575 559 1,720 780
14" 889 580 603 1,929 875
16" 991 630 686 2,370 1,075

ANSI Class 900

Dimensions (mm) Approx. Wt.
Size
L H D ( lb. ) ( kg. )
2" 368 195 216 121 55
2½" 419 235 244 154 70
3" 381 260 241 198 90
4" 457 275 292 298 135
5" 559 320 349 364 165
6" 610 370 381 650 295
8" 737 435 470 1,158 525
10" 838 520 546 1,985 900
12" 965 530 610 2,370 1,075
DPV Figure Numbers
ANSI Class 1500 ANSI Class
Material
Dimensions (mm) Approx. Wt. 600 900 1500
Size
L H D ( lb. ) ( kg. ) A216 Gr. WCB 6032F 9032F 15032F
2" 368 220 216 154 70 A352 Gr. LCC 603CF 903CF 1503CF
2½" 419 270 244 187 85 A217 Gr. WC6 6036F 9036F 15036F
3" 470 290 267 254 115 A217 Gr. WC9 6039F 9039F 15039F
4" 546 310 311 386 175 A217 Gr. C5 6035F 9035F 15035F
5" 673 350 375 397 180 A351 Gr. CF8 6034F 9034F 15034F
6" 705 410 394 816 370 A351 Gr. CF3 6034LF 9034LF 15034LF
8" 832 485 483 1,499 680 A351 Gr. CF8M 6033F 9033F 15033F
10" 991 737 584 3,711 1,683 A351 Gr. CF3M 6033LF 9033LF 15033LF
12" 1,130 875 673 5,281 2,395 A351 Gr. CN7M 6037F 9037F 15037F

DELTA PACIFIC VALVE MFG CO 14

 API 600 CAST STEEL VALVES

BEVEL GEAR OPERATOR

Model Torque Thrust L L1 H W Weight Model

Ratio
No. ft-lbf NM lbf kN mm mm mm mm lb kg No.
BG-0 540 735 22,030 98 3:1 218 467 140 308 53 24 BG-0
BG-1 1,100 1,500 44,060 196 4.1:1 289 555 160 460 93 42 BG-1
BG-2 2,210 3,000 78,680 350 6:1 385 694 230 610 192 87 BG-2
BG-3 4,420 6,000 141,630 630 19.3:1 510 877 270 610 340 154 BG-3

Bevel Gear Operator Sizing

Gate Valve Globe Valve
Valve ANSI Class ANSI Class Valve
Size 150 300 600 900 1500 150 300 600 900 1500 Size
2" BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 2"
2½" BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 2½"
3" BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-1 3"
4" BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-0 BG-1 BG-2 4"
5" BG-0 BG-0 BG-0 BG-0 BG-1 BG-0 BG-0 BG-1 BG-2 BG-3 5"
6" BG-0 BG-0 BG-0 BG-0 BG-1 BG-0 BG-1 BG-2 BG-2 BG-3 6"
8" BG-0 BG-0 BG-1 BG-1 BG-2 BG-0 BG-1 BG-3 BG-3 - 8"
10" BG-0 BG-0 BG-1 BG-2 BG-3 BG-1 BG-2 BG-3 - - 10"
12" BG-0 BG-1 BG-2 BG-2 BG-3 BG-1 BG-3 - - - 12"
14" BG-0 BG-1 BG-2 BG-3 - BG-2 BG-3 - - - 14"
16" BG-1 BG-1 BG-2 BG-3 - BG-2 - - - - 16"
18" BG-1 BG-2 BG-3 - - BG-3 - - - - 18"
20" BG-1 BG-2 BG-3 - - BG-3 - - - - 20"
24" BG-2 BG-3 - - - - - - - - 24"
26" BG-2 BG-3 - - - - - - - - 26"
28" BG-2 BG-3 - - - - - - - - 28"
30" BG-3 BG-3 - - - - - - - - 30"
36" BG-3 - - - - - - - - - 36"
Note: BOLD & ITALIC means bevel gear operator recommended.

15 DELTA PACIFIC VALVE MFG CO

 API 600 CAST STEEL VALVES

OPTIONAL MODIFICATIONS
SPECIAL SERVICES OPERATION
u Extended Stem / Handwheel Elevations u Hammer-Blow / Impactor Handwheels
u Extended Bonnet / Elevated Stuffing Box u Bevel Gear / Chainwheel Operator
u Floorstands / Universal Joints u Multi-Turn Electric Actuator
u Soft Seal Inserts on Disc or Seat(s) u Linear Pneumatic Actuator
u Lantern Ring / Leak-Out Port u Linear Hydraulic Actuator
u Live-Loaded Packing u Linear Electro-Hydraulic Actuator
u Oxygen / Chlorine Service Chainwheel Operator
u Double Block & Bleed Operation No. Suitable for Valve Handwheel Ø
u Quick Closing / Opening Operation 0 2" to 4"
u Fail Closed / Fail Open Operation 1 4¼" to 5¾"
u Outside Lever & Weight for Check Valves 1½ 6" to 7½"
u Slam Retarder for Check Valves 2 7¾" to 9"
u Bypass Piping ( see below ) 2½ 9¼" to 12½"
3 12¾" to 15½"
NON-DESTRUCTIVE TESTING 3½ 15¾" to 19"
u Radiographic Examination 4 19¼" to 22"
u Magnetic Particle Examination 4½ 22¼" to 26"
u Dye Penetrant Examination 5 26¼" to 36"

AUXILIARY CONNECTIONS

Nominal Valve Size 2" to 4" 5" to 8" 10" to 12" 14" and Larger
Connection Size ½" ¾" 1" 1½"
* Same location on the other side.

DELTA PACIFIC VALVE MFG CO 16

 API 600 CAST STEEL VALVES

END FLANGE DIMENSIONS (in.)

ANSI / ASME B16.5 Class 150 R.F. ( 1/16" Raised Face )

OD T G BCD Bolt No. of Stud L
Size Outside Companion Valve R.F. Bolt Hole Bolt Bolt Bolt Size
Ø Flange Flange Ø Circle Ø Ø Holes Ø Length
2 6 3/4 5/8 3 5/8 4 3/4 3/4 4 5/8 3 2
2½ 7 7/8 11/16 4 1/8 5 1/2 3/4 4 5/8 3 1/4 2½
3 7 1/2 15/16 15/16 5 6 3/4 4 5/8 3 3/4 3
4 9 15/16 15/16 6 3/16 7 1/2 3/4 8 5/8 3 3/4 4
5 10 15/16 15/16 7 5/16 8 1/2 7/8 8 3/4 4 5
6 11 1 1 8 1/2 9 1/2 7/8 8 3/4 4 6
8 13 1/2 1 1/8 1 1/8 10 5/8 12 7/8 8 3/4 4 1/4 8
10 16 1 3/16 1 3/16 12 3/4 14 1/4 1 12 7/8 4 3/4 10
12 19 1 1/4 1 1/4 15 17 1 12 7/8 4 3/4 12
14 21 1 3/8 1 3/8 16 1/4 18 3/4 1 1/8 12 1 5 1/4 14
16 23 1/2 1 7/16 1 7/16 18 1/2 21 1/4 1 1/8 16 1 5 1/2 16
18 25 1 9/16 1 9/16 21 22 3/4 1 1/4 16 1 1/8 6 18
20 27 1/2 1 11/16 1 11/16 23 25 1 1/4 20 1 1/8 6 1/4 20
24 32 1 7/8 1 7/8 27 1/4 29 1/2 1 3/8 20 1 1/4 6 3/4 24
MSS SP-44 / ASME B16.47 Series A Class 150 R.F. ( 1/16" Raised Face )
22 29 1/2 1 13/16 1 13/16 25 1/4 27 1/4 1 3/8 20 1 1/4 6 3/4 22
26 34 1/4 2 11/16 2 11/16 29 1/2 31 3/4 1 3/8 24 1 1/4 8 1/2 26
28 36 1/2 2 13/16 2 13/16 31 1/2 34 1 3/8 28 1 1/4 8 3/4 28
30 38 3/4 2 15/16 2 15/16 33 3/4 36 1 3/8 28 1 1/4 9 30
36 46 3 9/16 3 9/16 40 1/4 42 3/4 1 5/8 32 1 1/2 10 3/4 36
API 605 / ASME B16.47 Series B Class 150 R.F. ( 1/16" Raised Face )
26 30 15/16 1 5/8 1 5/8 28 29 5/16 7/8 36 3/4 5 1/2 26
28 32 15/16 1 3/4 1 3/4 30 31 5/16 7/8 40 3/4 5 3/4 28
30 34 15/16 1 3/4 1 3/4 32 33 5/16 7/8 44 3/4 5 3/4 30
36 41 5/8 2 1/16 2 1/16 38 1/4 39 3/4 1 44 7/8 6 1/2 36

17 DELTA PACIFIC VALVE MFG CO

 API 600 CAST STEEL VALVES

END FLANGE DIMENSIONS (in.)

ANSI / ASME B16.5 Class 300 R.F. ( 1/16" Raised Face )

OD T G BCD Bolt No. of Stud L
Size Outside Flange R.F. Bolt Hole Bolt Bolt Bolt Size
Ø Thickness Ø Circle Ø Ø Holes Ø Length
2 6 1/2 7/8 3 5/8 5 3/4 8 5/8 3 1/2 2
2½ 7 1/2 1 4 1/8 5 7/8 7/8 8 3/4 4 2½
3 8 1/4 1 1/8 5 6 5/8 7/8 8 3/4 4 1/4 3
4 10 1 1/4 6 3/16 7 7/8 7/8 8 3/4 4 1/2 4
5 11 1 3/8 7 5/16 9 1/4 7/8 8 3/4 4 3/4 5
6 12 1/2 1 7/16 8 1/2 10 5/8 7/8 12 3/4 4 3/4 6
8 15 1 5/8 10 5/8 13 1 12 7/8 5 1/2 8
10 17 1/2 1 7/8 12 3/4 15 1/4 1 1/8 16 1 6 1/4 10
12 20 1/2 2 15 17 3/4 1 1/4 16 1 1/8 6 3/4 12
14 23 2 1/8 16 1/4 20 1/4 1 1/4 20 1 1/8 7 14
16 25 1/2 2 1/4 18 1/2 22 1/2 1 3/8 20 1 1/4 7 1/2 16
18 28 2 3/8 21 24 3/4 1 3/8 24 1 1/4 7 3/4 18
20 30 1/2 2 1/2 23 27 1 3/8 24 1 1/4 8 20
24 36 2 3/4 27 1/4 32 1 5/8 24 1 1/2 9 24
MSS SP-44 / ASME B16.47 Series A Class 300 R.F. ( 1/16" Raised Face )
22 33 2 5/8 25 1/4 29 1/4 1 5/8 24 1 1/2 9 22
26 38 1/4 3 1/8 29 1/2 34 1/2 1 3/4 28 1 5/8 10 1/4 26
28 40 3/4 3 3/8 31 1/2 37 1 3/4 28 1 5/8 10 3/4 28
30 43 3 5/8 33 3/4 39 1/4 1 7/8 28 1 3/4 11 1/2 30
36 50 4 1/8 40 1/4 46 2 1/8 32 2 13 36
API 605 / ASME B16.47 Series B Class 300 R.F. ( 1/16" Raised Face )
26 34 1/8 3 1/2 29 31 5/8 1 3/8 32 1 1/4 10 1/4 26
28 36 1/4 3 1/2 31 33 3/4 1 3/8 36 1 1/4 10 1/4 28
30 39 3 11/16 33 1/4 36 1/4 1 1/2 36 1 3/8 10 3/4 30
36 46 1/8 4 1/16 39 3/4 42 7/8 1 3/4 32 1 5/8 12 36

DELTA PACIFIC VALVE MFG CO 18

 API 600 CAST STEEL VALVES

END FLANGE DIMENSIONS (in.)

ANSI / ASME B16.5 Class 600 R.F. ( 1/4" Raised Face )

OD T G BCD Bolt No. of Stud L
Size Outside Flange R.F. Bolt Hole Bolt Bolt Bolt Size
Ø Thickness Ø Circle Ø Ø Holes Ø Length
2 6 1/2 1 3 5/8 5 3/4 8 5/8 4 1/4 2
2½ 7 1/2 1 1/8 4 1/8 5 7/8 7/8 8 3/4 4 3/4 2½
3 8 1/4 1 1/4 5 6 5/8 7/8 8 3/4 5 3
4 10 3/4 1 1/2 6 3/16 8 1/2 1 8 7/8 5 3/4 4
5 13 1 3/4 7 5/16 10 1/2 1 1/8 8 1 6 1/2 5
6 14 1 7/8 8 1/2 11 1/2 1 1/8 12 1 6 3/4 6
8 16 1/2 2 3/16 10 5/8 13 3/4 1 1/4 12 1 1/8 7 1/2 8
10 20 2 1/2 12 3/4 17 1 3/8 16 1 1/4 8 1/2 10
12 22 2 5/8 15 19 1/4 1 3/8 20 1 1/4 8 3/4 12
14 23 3/4 2 3/4 16 1/4 20 3/4 1 1/2 20 1 3/8 9 1/4 14
16 27 3 18 1/2 23 3/4 1 5/8 20 1 1/2 10 16
18 29 1/4 3 1/4 21 25 3/4 1 3/4 20 1 5/8 10 3/4 18
20 32 3 1/2 23 28 1/2 1 3/4 24 1 5/8 11 1/4 20
24 37 4 27 1/4 33 2 24 1 7/8 13 24
MSS SP-44 / ASME B16.47 Series A Class 600 R.F. ( 1/4" Raised Face )
26 40 4 1/4 29 1/2 36 2 28 1 7/8 9 3/4 26
28 42 1/4 4 3/8 31 1/2 38 2 1/8 28 2 10 28
30 44 1/2 4 1/2 33 3/4 40 1/4 2 1/8 28 2 10 1/4 30
32 47 4 5/8 36 42 1/2 2 3/8 28 2 1/4 10 1/2 32
36 51 3/4 4 7/8 40 1/4 47 2 5/8 28 2 1/2 11 36
API 605 / ASME B16.47 Series B Class 600 R.F. ( 1/4" Raised Face )
26 35 4 3/8 28 5/8 31 3/4 1 3/4 28 1 5/8 13 1/4 26
28 37 1/2 4 9/16 30 7/8 34 1 7/8 28 1 3/4 13 3/4 28
30 40 1/4 4 15/16 33 1/8 36 1/2 2 28 1 7/8 14 3/4 30
36 47 3/4 5 49/64 39 3/4 43 1/2 2 3/8 28 2 1/4 17 1/4 36

19 DELTA PACIFIC VALVE MFG CO

 API 600 CAST STEEL VALVES

END FLANGE DIMENSIONS (in.)

ANSI / ASME B16.5 Class 900 R.F. ( 1/4" Raised Face )

OD T G BCD Bolt No. of Stud L
Size Outside Flange R.F. Bolt Hole Bolt Bolt Bolt Size
Ø Thickness Ø Circle Ø Ø Holes Ø Length
2 8 1/2 1 1/2 3 5/8 6 1/2 1 8 7/8 5 3/4 2
2½ 9 5/8 1 5/8 4 1/8 7 1/2 1 1/8 8 1 6 1/4 2½
3 9 1/2 1 1/2 5 7 1/2 1 8 7/8 5 3/4 3
4 11 1/2 1 3/4 6 3/16 9 1/4 1 1/4 8 1 1/8 6 3/4 4
5 13 3/4 2 7 5/16 11 1 3/8 8 1 1/4 7 1/2 5
6 15 2 3/16 8 1/2 12 1/2 1 1/4 12 1 1/8 7 1/2 6
8 18 1/2 2 1/2 10 5/8 15 1/2 1 1/2 12 1 3/8 8 3/4 8
10 21 1/2 2 3/4 12 3/4 18 1/2 1 1/2 16 1 3/8 9 1/4 10
12 24 3 1/8 15 21 1 1/2 20 1 3/8 10 12
14 25 1/4 3 3/8 16 1/4 22 1 5/8 20 1 1/2 10 3/4 14
16 27 3/4 3 1/2 18 1/2 24 1/4 1 3/4 20 1 5/8 11 1/4 16
18 31 4 21 27 2 20 1 7/8 12 3/4 18
20 33 3/4 4 1/4 23 29 1/2 2 1/8 20 2 13 3/4 20
24 41 5 1/2 27 1/4 35 1/2 2 5/8 20 2 1/2 17 1/4 24
MSS SP-44 / ASME B16.47 Series A Class 900 R.F. ( 1/4" Raised Face )
26 42 3/4 5 1/2 29 1/2 37 1/2 2 7/8 20 2 3/4 17 3/4 26
28 46 5 5/8 31 1/2 40 1/4 3 1/8 20 3 18 1/2 28
30 48 1/2 5 7/8 33 3/4 42 3/4 3 1/8 20 3 19 30
32 51 3/4 6 1/4 36 45 1/2 3 3/8 20 3 1/4 20 1/4 32
36 57 1/2 6 1/2 40 1/4 50 3/4 3 5/8 20 3 1/2 21 1/4 36
API 605 / ASME B16.47 Series B Class 900 R.F. ( 1/4" Raised Face )
26 40 1/4 5 5/16 30 35 1/2 2 5/8 20 2 1/2 16 3/4 26
28 43 1/2 5 13/16 32 1/4 38 1/4 2 7/8 20 2 3/4 18 1/4 28
30 46 1/2 6 1/8 34 1/2 40 3/4 3 1/8 20 3 19 1/2 30
36 53 6 13/16 40 1/2 47 1/4 3 1/8 24 3 20 3/4 36

DELTA PACIFIC VALVE MFG CO 20

 API 600 CAST STEEL VALVES

END FLANGE DIMENSIONS (in.)

ANSI / ASME B16.5 Class 1500 R.F. ( 1/4" Raised Face )

OD T G BCD Bolt No. of Stud L
Size Outside Flange R.F. Bolt Hole Bolt Bolt Bolt Size
Ø Thickness Ø Circle Ø Ø Holes Ø Length
½ 4 3/4 7/8 1 3/8 3 1/4 7/8 4 3/4 4 1/4 ½
¾ 5 1/8 1 1 6/8 3 1/2 7/8 4 3/4 4 1/2 ¾
1 5 7/8 1 1/8 2 4 1 4 7/8 5 1
1¼ 6 1/4 1 1/8 2 1/2 4 3/8 1 4 7/8 5 1¼
1½ 7 1 1/4 2 7/8 4 7/8 1 1/8 4 1 5 1/2 1½
2 8 1/2 1 1/2 3 5/8 6 1/2 1 8 7/8 5 3/4 2
2½ 9 5/8 1 5/8 4 1/8 7 1/2 1 1/8 8 1 6 1/4 2½
3 10 1/2 1 7/8 5 8 1 1/4 8 1 1/8 7 3
4 12 1/4 2 1/8 6 3/16 9 1/2 1 3/8 8 1 1/4 7 3/4 4
5 14 3/4 2 7/8 7 5/16 11 1/2 1 5/8 8 1 1/2 9 3/4 5
6 15 1/2 3 1/4 8 1/2 12 1/2 1 1/2 12 1 3/8 10 1/4 6
8 19 3 5/8 10 5/8 15 1/2 1 3/4 12 1 5/8 11 1/2 8
10 23 4 1/4 12 3/4 19 2 12 1 7/8 13 1/4 10
12 26 1/2 4 7/8 15 22 1/2 2 1/8 16 2 14 3/4 12
14 29 1/2 5 1/4 16 1/4 25 2 3/8 16 2 1/4 16 14
16 32 1/2 5 3/4 18 1/2 27 3/4 2 5/8 16 2 1/2 17 1/2 16
18 36 6 3/8 21 30 1/2 2 7/8 16 2 3/4 19 1/2 18
20 38 3/4 7 23 32 3/4 3 1/8 16 3 21 1/4 20
24 46 8 27 1/4 39 3 5/8 16 3 1/2 24 1/4 24

21 DELTA PACIFIC VALVE MFG CO

 API 600 CAST STEEL VALVES

ANSI CLASS 150 PRESSURE-TEMP RATINGS

Pressure (psig)
Temperature ANSI B16.34 Material Group Temp.
°F 1.1 1.2 1.9 1.10 1.13 2.1 2.2 3.17 °C
WCB1 LCC2 WC63 WC93 C53 CF84 CF35 CF8M4 CF3M6 CN7M7
-20 to 100 285 290 290 290 290 275 275 275 275 230 -29 to 38
200 260 260 260 260 260 230 230 235 235 200 93
300 230 230 230 230 230 205 205 215 215 180 149
350 215 215 215 215 215 198 198 205 205 170 177
400 200 200 200 200 200 190 190 195 195 160 204
450 185 185 185 185 185 180 180 183 183 155 232
500 170 170 170 170 170 170 170 170 170 150 260
550 155 155 155 155 155 155 155 155 155 145 288
600 140 140 140 140 140 140 140 140 140 140 316
650 125 125 125 125 125 125 125 125 125 343
700 110 110 110 110 110 110 110 110 371
750 95 95 95 95 95 95 95 95 399
800 80 80 80 80 80 80 80 80 427
850 65 65 65 65 65 65 65 454
900 50 50 50 50 50 50 482
950 35 35 35 35 35 35 510
1,000 20 20 20 20 20 20 538
1,050 20a 20a 20a 20a 20 a
566
1,100 20a 20a 20a 20a 20 a
593
1,150 20a 20a 20 a
621
1,200 15a 20a 20 a
649
1,250 20a 20 a
677
1,300 20a 20 a
704
1,350 20a 20 a
732
1,400 20a 20 a
760
1,450 15a 20 a
788
1,500 10a 20 a
816
1
Upon prolonged exposure to temperatures above 800 °F (427 °C), the carbide phase of steel may be
converted to graphite. Permissible, but not recommended for prolonged use above 800 °F (427 °C).
2
Not to be used over 650 °F (343 °C).
3
Use normalized and tempered material only.
4
At temperatures over 1,000 °F (538 °C), use only when the carbon content is 0.04% or higher.
5
Not to be used over 800 °F (427 °C).
6
Not to be used over 850 °F (454 °C).
7
Use solution annealed material only.
a
For welding end valves only. Flanged end ratings terminate at 1,000 °F (538 °C).

DELTA PACIFIC VALVE MFG CO 22

 API 600 CAST STEEL VALVES

ANSI CLASS 300 PRESSURE-TEMP RATINGS

Pressure (psig)
Temperature ANSI B16.34 Material Group Temp.
°F 1.1 1.2 1.9 1.10 1.13 2.1 2.2 3.17 °C
WCB1 LCC2 WC63 WC93 C53 CF84 CF35 CF8M4 CF3M6 CN7M7
-20 to 100 740 750 750 750 750 720 720 720 720 600 -29 to 38
200 675 750 750 750 745 600 600 620 620 520 93
300 655 730 720 730 715 540 540 560 560 465 149
350 645 718 708 718 710 518 518 538 538 443 177
400 635 705 695 705 705 495 495 515 515 420 204
450 618 685 680 685 685 480 480 498 498 405 232
500 600 665 665 665 665 465 465 480 480 390 260
550 575 635 635 635 635 450 450 465 465 375 288
600 550 605 605 605 605 435 435 450 450 360 316
650 535 590 590 590 590 430 430 445 445 343
700 535 570 570 570 425 425 430 430 371
750 505 530 530 530 415 415 425 425 399
800 410 510 510 510 405 405 420 420 427
850 270 485 485 485 395 420 420 454
900 170 450 450 370 390 415 482
950 105 320 375 275 380 385 510
1,000 50 215 260 200 320 350 538
1,050 145a 175a 145a 310a 345a 566
1,100 95a 110a 100a 255a 305a 593
1,150 60a 200 a
235a 621
1,200 35a 155a 185a 649
1,250 115a 145a 677
a
1,300 85 115a 704
1,350 60a 95a 732
1,400 50a 75a 760
a
1,450 35 60a 788
1,500 25a 40a 816
1
Upon prolonged exposure to temperatures above 800 °F (427 °C), the carbide phase of steel may be
converted to graphite. Permissible, but not recommended for prolonged use above 800 °F (427 °C).
2
Not to be used over 650 °F (343 °C).
3
Use normalized and tempered material only.
4
At temperatures over 1,000 °F (538 °C), use only when the carbon content is 0.04% or higher.
5
Not to be used over 800 °F (427 °C).
6
Not to be used over 850 °F (454 °C).
7
Use solution annealed material only.
a
For welding end valves only. Flanged end ratings terminate at 1,000 °F (538 °C).

23 DELTA PACIFIC VALVE MFG CO

 API 600 CAST STEEL VALVES

ANSI CLASS 600 PRESSURE-TEMP RATINGS

Pressure (psig)
Temperature ANSI B16.34 Material Group Temp.
°F 1.1 1.2 1.9 1.10 1.13 2.1 2.2 3.17 °C
WCB1 LCC2 WC63 WC93 C53 CF84 CF35 CF8M4 CF3M6 CN7M7
-20 to 100 1,480 1,500 1,500 1,500 1,500 1,440 1,440 1,440 1,440 1,200 -29 to 38
200 1,350 1,500 1,500 1,500 1,490 1,200 1,200 1,240 1,240 1,035 93
300 1,315 1,455 1,445 1,455 1,430 1,080 1,080 1,120 1,120 930 149
350 1,293 1,433 1,415 1,433 1,420 1,038 1,038 1,073 1,073 888 177
400 1,270 1,410 1,385 1,410 1,410 995 995 1,025 1,025 845 204
450 1,235 1,370 1,358 1,370 1,370 963 963 990 990 813 232
500 1,200 1,330 1,330 1,330 1,330 930 930 955 955 780 260
550 1,148 1,270 1,270 1,270 1,270 903 903 928 928 750 288
600 1,095 1,210 1,210 1,210 1,210 875 875 900 900 720 316
650 1,075 1,175 1,175 1,175 1,175 860 860 890 890 343
700 1,065 1,135 1,135 1,135 850 850 870 870 371
750 1,010 1,065 1,065 1,055 830 830 855 855 399
800 825 1,015 1,015 1,015 805 805 845 845 427
850 535 975 975 965 790 835 835 454
900 345 900 900 740 780 830 482
950 205 640 755 550 765 775 510
1,000 105 430 520 400 640 700 538
1,050 290a 350a 290a 615a 685 a
566
1,100 190a 220a 200a 515a 610 a
593
1,150 125a 400a 475 a
621
1,200 70a 310a 370 a
649
1,250 225a 295 a
677
1,300 170a 235 a
704
1,350 125a 190 a
732
1,400 95a 150 a
760
1,450 70a 115 a
788
1,500 55a 85 a
816
1
Upon prolonged exposure to temperatures above 800 °F (427 °C), the carbide phase of steel may be
converted to graphite. Permissible, but not recommended for prolonged use above 800 °F (427 °C).
2
Not to be used over 650 °F (343 °C).
3
Use normalized and tempered material only.
4
At temperatures over 1,000 °F (538 °C), use only when the carbon content is 0.04% or higher.
5
Not to be used over 800 °F (427 °C).
6
Not to be used over 850 °F (454 °C).
7
Use solution annealed material only.
a
For welding end valves only. Flanged end ratings terminate at 1,000 °F (538 °C).

DELTA PACIFIC VALVE MFG CO 24

 API 600 CAST STEEL VALVES

ANSI CLASS 900 PRESSURE-TEMP RATINGS

Pressure (psig)
Temperature ANSI B16.34 Material Group Temp.
°F 1.1 1.2 1.9 1.10 1.13 2.1 2.2 3.17 °C
WCB1 LCC2 WC63 WC93 C53 CF84 CF35 CF8M4 CF3M6 CN7M7
-20 to 100 2,220 2,250 2,250 2,250 2,250 2,160 2,160 2,160 2,160 1,800 -29 to 38
200 2,025 2,250 2,250 2,250 2,235 1,800 1,800 1,860 1,860 1,555 93
300 1,970 2,185 2,165 2,185 2,150 1,620 1,620 1,680 1,680 1,395 149
350 1,935 2,150 2,123 2,150 2,133 1,555 1,555 1,610 1,610 1,330 177
400 1,900 2,115 2,080 2,115 2,115 1,490 1,490 1,540 1,540 1,265 204
450 1,848 2,055 2,038 2,055 2,055 1,443 1,443 1,488 1,488 1,215 232
500 1,795 1,995 1,995 1,995 1,995 1,395 1,395 1,435 1,435 1,165 260
550 1,718 1,905 1,905 1,905 1,905 1,353 1,353 1,395 1,395 1,123 288
600 1,640 1,815 1,815 1,815 1,815 1,310 1,310 1,355 1,355 1,080 316
650 1,610 1,765 1,765 1,765 1,765 1,290 1,290 1,330 1,330 343
700 1,600 1,705 1,705 1,705 1,275 1,275 1,305 1,305 371
750 1,510 1,595 1,595 1,585 1,245 1,245 1,280 1,280 399
800 1,235 1,525 1,525 1,525 1,210 1,210 1,265 1,265 427
850 805 1,460 1,460 1,450 1,190 1,255 1,255 454
900 515 1,350 1,350 1,110 1,165 1,245 482
950 310 955 1,130 825 1,145 1,160 510
1,000 155 650 780 595 965 1,050 538
1,050 430a 525a 430a 925a 1,030a 566
1,100 290a 330a 300a 770a 915a 593
1,150 185a 595 a
710a 621
1,200 105a 465a 555a 649
1,250 340a 440a 677
a
1,300 255 350a 704
1,350 185a 290a 732
1,400 145a 225a 760
a
1,450 105 175a 788
1,500 80a 125a 816
1
Upon prolonged exposure to temperatures above 800 °F (427 °C), the carbide phase of steel may be
converted to graphite. Permissible, but not recommended for prolonged use above 800 °F (427 °C).
2
Not to be used over 650 °F (343 °C).
3
Use normalized and tempered material only.
4
At temperatures over 1,000 °F (538 °C), use only when the carbon content is 0.04% or higher.
5
Not to be used over 800 °F (427 °C).
6
Not to be used over 850 °F (454 °C).
7
Use solution annealed material only.
a
For welding end valves only. Flanged end ratings terminate at 1,000 °F (538 °C).

25 DELTA PACIFIC VALVE MFG CO

 API 600 CAST STEEL VALVES

ANSI CLASS 1500 PRESSURE-TEMP RATINGS

Pressure (psig)
Temperature ANSI B16.34 Material Group Temp.
°F 1.1 1.2 1.9 1.10 1.13 2.1 2.2 3.17 °C
WCB1 LCC2 WC63 WC93 C53 CF84 CF35 CF8M4 CF3M6 CN7M7
-20 to 100 3,705 3,750 3,750 3,750 3,750 3,600 3,600 3,600 3,600 3,000 -29 to 38
200 3,375 3,750 3,750 3,750 3,725 3,000 3,000 3,095 3,095 2,590 93
300 3,280 3,640 3,610 3,640 3,580 2,700 2,700 2,795 2,795 2,330 149
350 3,225 3,585 3,538 3,585 3,555 2,593 2,593 2,683 2,683 2,220 177
400 3,170 3,530 3,465 3,530 3,530 2,485 2,485 2,570 2,570 2,110 204
450 3,083 3,428 3,395 3,428 3,428 2,408 2,408 2,480 2,480 2,028 232
500 2,995 3,325 3,325 3,325 3,325 2,330 2,330 2,390 2,390 1,945 260
550 2,865 3,175 3,175 3,175 3,175 2,258 2,258 2,323 2,323 1,873 288
600 2,735 3,025 3,025 3,025 3,025 2,185 2,185 2,255 2,255 1,800 316
650 2,685 2,940 2,940 2,940 2,940 2,150 2,150 2,220 2,220 343
700 2,665 2,840 2,840 2,840 2,125 2,125 2,170 2,170 371
750 2,520 2,660 2,660 2,640 2,075 2,075 2,135 2,135 399
800 2,060 2,540 2,540 2,540 2,015 2,015 2,110 2,110 427
850 1,340 2,435 2,435 2,415 1,980 2,090 2,090 454
900 860 2,245 2,245 1,850 1,945 2,075 482
950 515 1,595 1,885 1,370 1,910 1,930 510
1,000 260 1,080 1,305 995 1,605 1,750 538
1,050 720a 875a 720a 1,545a 1,720 a
566
1,100 480a 550a 495a 1,285a 1,525 a
593
1,150 310a 995a 1,185 a
621
1,200 170a 770a 925 a
649
1,250 565a 735 a
677
1,300 430a 585 a
704
1,350 310a 480 a
732
1,400 240a 380 a
760
1,450 170a 290 a
788
1,500 135a 205 a
816
1
Upon prolonged exposure to temperatures above 800 °F (427 °C), the carbide phase of steel may be
converted to graphite. Permissible, but not recommended for prolonged use above 800 °F (427 °C).
2
Not to be used over 650 °F (343 °C).
3
Use normalized and tempered material only.
4
At temperatures over 1,000 °F (538 °C), use only when the carbon content is 0.04% or higher.
5
Not to be used over 800 °F (427 °C).
6
Not to be used over 850 °F (454 °C).
7
Use solution annealed material only.
a
For welding end valves only. Flanged end ratings terminate at 1,000 °F (538 °C).

DELTA PACIFIC VALVE MFG CO 26

 API 600 CAST STEEL VALVES

SHELL MATERIAL SPECIFICATIONS

Carbon and Alloy Steel Castings

Unit A216 Gr. WCB A352 Gr. LCC A217 Gr. WC6 A217 Gr. WC9 A217 Gr. C5
1 3 4
C % 0.300 0.250 0.05-0.20 0.05-0.18 0.200
Si1 % 0.600 0.750
Mn1 % 1.0003 1.2004 0.50-0.80 0.40-0.70
P1 % 0.040
S1 % 0.045
Cr1 % 0.500 0.500 5
1.00-1.50 2.00-2.75 4.00-6.50
Ni1 % 0.500 0.500 5
0.500
Mo1 % 0.200 0.2005 0.45-0.65 0.90-1.20 0.45-0.65
Cu1 % 0.300 0.300 5
0.500
V1 % 0.030 0.030 5
-
T.S. MPa 485-655 620-795
Y.S.2 MPa 250 275 415
El.2 % 22.0 20.0 18.0
R.A.2 % 35.0

Corrosion Resistant Steel Castings

Unit A351 Gr. CF8 A351 Gr. CF8M A351 Gr. CF3 A351 Gr. CF3M A351 Gr. CN7M
1
C % 0.08 0.03 0.07
Si1 % 2.00 1.50 2.00 1.50
Mn1 % 1.50
P1 % 0.04
S1 % 0.04
Cr % 18.0-21.0 17.0-21.0 19.0-22.0
Ni % 8.0-11.0 9.0-12.0 8.0-12.0 9.0-13.0 27.5-30.5
Mo1 % 0.50 2.0-3.0 0.50 2.0-3.0
Cu % - 3.0-4.0
T.S.2 MPa 485 425
Y.S.2 MPa 205 170
El.2 % 35.0

1
Values listed are permitted maximums, unless otherwise stated.
2
Values listed are required minimums, unless otherwise stated.
3
For each reduction of 0.01% below the specified maximum carbon content, an increase of 0.04% Mn above the specified
maximum will be permitted up to a maximum of 1.28%.
4
For each reduction of 0.01% below the specified maximum carbon content, an increase of 0.04% Mn above the specified
maximum will be permitted up to a maximum of 1.40%.
5
Specified Residual Elements - The total content of these elements is 1.00% maximum.

27 DELTA PACIFIC VALVE MFG CO

 API 600 CAST STEEL VALVES

TRIM MATERIAL SPECIFICATIONS

Corrosion Resistant Alloys
Unit A182 Gr. F6a A182 Gr. F304 A182 Gr. F316 A182 Gr. F3473
C1 % 0.150 0.080
Si1 % 1.000
Mn1 % 1.000 2.000
P1 % 0.040
S1 % 0.030
Cr % 11.5-13.5 18.0-20.0 16.0-18.0 17.0-20.0
Ni1 % 0.500 8.0-11.0 10.0-14.0 9.0-13.0
Mo % - 2.0-3.0 -
N1 % - 0.100 -
Tensile Str.2 MPa 485 515 4

Yield Str.2 MPa 275 205

Elongation2 % 18.0 30.0
Reduc. of Area2 % 35.0 50.0
Hardness HB 143-187 -
Nonferrous Alloys Bolting
5
Alloy 20 Ni-Cu Alloy Alloy Steel Carbon Steel
Unit B462 UNS N04400 A193 A194
UNS N08020 B164 Gr. B7 Gr. 2H
C1 % 0.070 0.300 0.37-0.49 0.400 Min.
Si1 % 1.000 0.500 0.15-0.35 0.400
Mn1 % 2.000 0.65-1.10 1.000
P1 % 0.045 - 0.035 0.040
S1 % 0.035 0.024 0.040 0.050
Cr % 19.0-21.0 - 0.75-1.20 -
Ni2 % 32.0-38.0 63.06
- -
Mo1 % 2.0-3.0 - 0.15-0.25 -
Cu1 % 3.0-4.0 28.0-34.0 - -
Fe1 % Balance 6
2.500 - -
Tensile Str.2 MPa 551 480 860 -
Yield Str.2 MPa 241 170 720 -
Elongation2 % 30.0 35.0 18.0 -
Reduc. of Area2 % 50.0 - 50.0 -
1
Values listed are permitted maximums, unless otherwise stated.
2
Values listed are required minimums, unless otherwise stated.
3
Shall have a columbium plus tantalum content of not less than ten times the carbon content and not more than 1.10%.
4
For sections over 5 inches in thickness, the minimum tensile strength shall be 485 MPa.
5
Shall have a columbium plus tantalum content of not less than eight times the carbon content and not more than 1.0%.
6
Shall be determined arithmetically by difference.

DELTA PACIFIC VALVE MFG CO 28

 API 600 CAST STEEL VALVES

FIGURE NUMBER COMPARISON CHART

ANSI
Valve DPV® Crane Kitz Lunkenheimer Newco
Class
150 1512F 47 150SCL 1512 11F-CB
300 3012F 33 300SCL 3012 13F-CB
Gate

600 6012F 76 600SCL 6012 16F-CB

900 9012F 83 900SCL - 19F-CB
1500 15012F 87 1500SCL - 115F-CB
150 1522F 143 150SCJ 1542 21F-CB
300 3022F 151 300SCJ 3042 23F-CB
Globe

600 6022F 171 600SCJ 6042 26F-CB

900 9022F 183 900SCJ - 29F-CB
1500 15022F 189 1500SCJ - 215F-CB
150 1532F 147 150SCO 1572 31F-CB
Swing Check

300 3032F 159 300SCO 3072 33F-CB

600 6032F 175 600SCO 6072 36F-CB
900 9032F 187 900SCO - 39F-CB
1500 15032F 199 1500SCO - 315F-CB

ANSI
Valve Pacific Powell Stockham Velan Walworth
Class
150 2155 1503N / 1503 15-OF F-0064C-02 5202F
300 2355 3003N / 3003 30-OF F-1064C-02 5206F
Gate

600 2655 6003 60-OF F-2064C-02 5232F

900 2955 9003 - F-7064C-02 5247F
1500 21555 1303 - F-3064C-02 5262F
150 160 1531 15-GPF F-0074C-02 5275F
300 360 3031 30-GPF F-1074C-02 5281F
Globe

600 660 6031 60-GPF F-2074C-02 5295F

900 960 9031 - F-7074C-02 5301F
1500 - 1331 - F-3074C-02 5308F
150 180 / 184 1561 15-SF F-0114C-02 5341F
Swing Check

300 380 / 384 3061 30-SF F-1114C-02 5344F

600 680 / 684 6061 60-SF F-2114C-02 5350F
900 984 9061 - F-7114C-02 5353F
1500 1584 1361 - F-3114C-02 5356F

N.B. DPV® is an internationally registered trademark of D.P.S.I., New York, USA. All other names and/or trademarks
referenced above and elsewhere in the catalog are the properties of their respective owners.

29 DELTA PACIFIC VALVE MFG CO

 API 600 CAST STEEL VALVES
STANDARD TERMS AND CONDITIONS OF SALE
CONTROLLING PROVISIONS AND ACCEPTANCE
All DPV sales are expressly subject to these terms and conditions, which govern and prevail regardless of any terms and conditions set forth to the contrary by the Buyer.
The Buyer's acceptance of these terms and conditions is evidenced by the Buyer's placement of order with DPV.
QUOTATIONS AND PRICES
All goods are priced F.O.B. our warehouse. Inland freight to destination is for account of the Buyer, either on collect basis, or prepaid and then billed by DPV for payment
by the Buyer. Unless otherwise stated in writing, all prices are valid for thirty (30) days only. Published prices are subject to changes without prior notice.
DELIVERY
Delivery quoted is estimated based on availability of DPV's stock and/or production schedule at time of quotation/order, and is subject to changes in the event of prior
sales and re-scheduling to any occurences beyond the DPV 's control, though DPV, as a gesture of goodwill, will do its best stay as close as possible to the delivery
estimated. Title to the product(s) and risk of loss shall pass to the Buyer upon delivery to a common carrier or Buyer's transport. All claims of loss to the materials in
transit shall be filed by the Buyer directly with the carrier. All claims for shortages, corrections or deductions must be made to DPV within ten (10) days after receipt of
goods.
CANCELLATION AND RETURN
All cancellations and returns, etc., cannot be made without DPV's formal prior consent with a Return Authorization Number (RAN). A cancellation and re-stocking charge
will apply in accordance with DPV's Return Policy, which applies to all returns. Special items are not subject to cancellation or returns.
FORCE MAJEURE
DPV is not to be held responsible for any delays in delivery, or defaults in completing an order or contract, due to force majeure such as strikes, work stoppages, fires,
floods, accidents, inability to obtain fuel and transportation means, vendors' delayed deliveries or materials, parts, components, goods, etc., to DPV, acts of God, and/or
any other causes beyond Seller's control.
TAXES
All DPV prices are exclusive of all taxes, which, if applicable under government laws, shall be wholly for the Buyer's account and to be fully paid by the Buyer only.
Where the Buyer is lawfully entitled to exemption from any tax, all necessary documentation must be provided by the Buyer to DPV to effect such exemption. Any
taxes interests and penalties assessed against DPV on transactions which are otherwise determined as taxable, shall be borne by the Buyer. The term "Taxes" used
here shall include any impost, duty, levy or other charges imposed by any government or agency thereof upon the property, services or parties hereto, but shall not
included those measured by the net income of DPV.
ERRORS
All clerical and computational errors and/or omissions are exempted and are to be corrected by DPV.
LIMITED WARRANTY
All DPV products are guaranteed to the original Buyer only for a one (1) year period from and after the invoice date against defects in material and workmanship under
normal and proper use and service, and not caused or resulting from improper usage or application, improper installation, improper maintenace and repairs, modifications
or alterations, normal wear and tears, corrosion, erosion, or chemical attacks. DPV's obligation under this warranty is limited strictly to repairing or replacing, at it's
election, any parts or products determined by DPV to be defective, or refunding the purchasing price to the original Buyer. DPV shall bear normal surface transportation
cost for shipping the replacements, but shall not bear any losses, damages, installation, re-installation, enginering, or any other costs incurred thereof by the Buyer. The
Uniform Commercial Code (UCC) shall not apply to the sale, nor the Michigan statutes adopting the UCC. This warranty is expressly made in lieu of and excludes all
other warranties, guarantees, or representations expressed or implied. There are no implied warranties of merchantibility or fitness for a particular purpose.
EXCLUSIONS
Do not use DPV products in aircraft or aerospace applications. No warranties, guarantees or representations of any kind are made with respect to such applications.
The Buyer assumes on their own all risks of any use in such applications and will indemnify and hold harmless DPV against and from any claims, costs (including
attorney's fees) and liabilities arising out of such use.
LIABILITY
Notwithstanding any provision in the Buyer's order or elsewhere to the contrary, under no circumstances shall DPV be liable for any direct, indirect, special, consequential
or incidental damages (including but not limited to loss of revenue, loss of use, material, production or end products), or any other claims for damages arising out of the
purchase, delivery, installation or use of DPV products, whether claimed in contract, warranty, tort (including negligence) and delays, actual or imputed, or otherwise.
GOVERNING LAW
The contract shall be governed by, construed, and enforced in accordance with the laws of the State of New York in the United States of America. The provisions of the
"UN Convention on Contracts for the International Sale of Goods" shall not apply.
PARTIES
The abbreviaiton "DPV" referes to Delta Pacific Valve Mfg. Co., and the word "Buyer" refers to the Person, Party or Company purchasing goods and/or services from
Delta Pacific Valve Mfg. Co. (DPV).

DELTA PACIFIC VALVE MFG CO 30

 OTHER PRODUCTS
API 6D / BS 5351 Floating Ball Valves API 6D Trunnion Mounted Ball Valves
Fire Tested & Certified to API 6FA & BS 6755 Pt. 2 Forged Steel, 3-Piece Bolted Body Design
1-Pce & 2-Pce Body Design, Full & Reduced Bores ANSI Cl.150 to 2500, Full & Reduced Bores
ANSI Class 150 & 300, ½" to 12", WCB/LCC/CF8M Available in A105, LF2 and other Alloys

API 609 Butterfly Valves API 6D / API 594 Wafer Check Valves
Category A, Wafer & Lug Body Patterns Dual & Single Plate Designs
Concentric Disc & Seat Design, 2-Pce Stem ANSI Class 150 to 600, 2" to 24"
Rated 200 psig CWP, 2" to 12", WCB & CF8M Available in WCB, LCB & CF8M

Industrial Ball Valves - Investment Cast Industrial Strainers

1-Pce, 2-Pce & 3 Pce Body Designs Y & Basket (Simplex & Duplex) Types
Full & Reduced Bores, NPT/SW/BW Ends ANSI Class 150 to 1500, ¼" to 16"
ANSI Class 150 to 800, ½" to 4", WCB & CF8M Available in Cast Iron, Bronze, WCB & CF8M

Multi-Function Control Check Valves Pump Suction Diffusers

Y-Pattern Body, Cast & Ductile Iron, 2" to 14" Cast Iron & Ductile Iron Materials
ANSI Class 125, 150 & 300, Flanged Ends ANSI Class 125, 150 & 300, Flanged Ends

Corporate Head Office

DELTA PACIFIC VALVE MFG. CO.

400 Oser Avenue #400
Hauppauge, New York 11788-3600 U.S.A.
Tel: 1 (631) 231 1261 • Fax: 1 (631) 231 1794 • Email: [email protected]

England

DELTA PACIFIC MFG. LTD.

10 Victoria Way, Studlands Park Industrial Estate
Newmarket CB8 7SH, England, U.K.
Tel: 44 (1638) 606 226 • Fax: 44 (1638) 606 227 • Email: [email protected]

Distributed by:

Printed in U.S.A. Catalog# CSV02 ©2002 All rights reserved by Delta Pacific Valve Mfg. Co., U.S.A.