Scribd
Upload
59 views1 page

Fyt 45

The GM8804C-A6 is a batching controller that has a 6 digit display, 24-bit analog to digital converter, supports up to 8 load cells, and has functions for calibration, weighing, digital and analog I/O. It is designed for panel mounting and has an operating temperature range of -10°C to 40°C with IP65 front panel protection. The controller can communicate via RS232, RS485 using Modbus RTU protocol and has optional analog output capabilities.

Uploaded by

مراد حمود
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
59 views1 page

Fyt 45

The GM8804C-A6 is a batching controller that has a 6 digit display, 24-bit analog to digital converter, supports up to 8 load cells, and has functions for calibration, weighing, digital and analog I/O. It is designed for panel mounting and has an operating temperature range of -10°C to 40°C with IP65 front panel protection. The controller can communicate via RS232, RS485 using Modbus RTU protocol and has optional analog output capabilities.

Uploaded by

مراد حمود
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

GM8804C-A6 batching controller

Specification:
INIDICATOR POWER
Power Supply 90V～260V AC 50Hz(or 60Hz)±2%
Power Consume About 15W
A/D CONVERTER
Type 24-bit Delta-Sigma
Analogue input range 0.2mV to 37mV
Linearity <0.01%FS
Gain Drifting 10PPM/℃
Minimum Sensitivity 0.5 µ V/d
Conversion Rate 120/s
Display Accuracy 1 / 30,000
DISPLAY & KEYBOARD
Main Display 1 6 digits, 7 segments, VFD
Sub Display 2 3 digits, 7 segments, VFD
Keyboard 16 buttons with beeping feedback
(18 indicator in VFD) ZERO, STAB, RUN, SUM, OVER, UNDER, SP1, SP2,
Status Indicators
SP3, DISC, NZ, FILL, HILIM, HI, GO, LO, LOLIM, HOLD
LED Status Gross, Net, Tare, Pack
CALIBRATION & WEIGHING FUNCTIONS
Calibration By test weight or by electronic calibration
Digital Filter Multiple FIR filter with 9 selectable levels
Weighing Functions zero, zero tracking, auto-zero at power
ENVIORNMENTAL
Operating Temperature -10℃ to 40℃
Storage Temperature -25℃ to 70℃
Relative Humidity 90% R.H without dew
IP Level Front panel IP 65
LOAD CELLS
Excitation 12V
Load Cells Drives 8pcs Load Cells 350Ω
MECHANICAL DATA
Dimensions & Weight 165×181×98 mm (L×W×H) weight approx. 2.5kgs
Standard Mounting Panel Mount
Certification CE
Enclosure ABS front panel, cast aluminum body
DIGITAL INPUT
Input Number 8
(12 Self-defined functions) Start, Stop, Zero, Clear Alarm, Recipe select,
Input Functions
Manual discharging, Manual fine feeding, Print, Key locker, Hi-limit, low-limit
DIGITAL OUTPUT
Output Number 12
(15 Self-defined functions) Run, Stop, Fast feeding, Moderate feeding, Fine
Output Functions
feeding, Fixed value, Discharging, No.1~No.6 Material.
INSTRUMENT WITH ANALOGUE OUTPUT(OPTIONAL)
Type Isolated 16-bit D/A converter
Accuracy 0.04%
Voltage Output 0-5V / 0-10V / -5-5V / -10-10V
Current Output 4-20mA / 0-20mA / 0-24mA
PRINT FUNCTION
Print RS232 Port
UART RS232/RS485 INTERFACE
BUS Standard Modbus RTU
CONT Sending Continuous (General Measure Protocol)
READ Read and Response mode (General Measure Protocol)

You might also like