ITP For Domestic Water Piping Installation

Download as xls, pdf, or txt
Download as xls, pdf, or txt
You are on page 1of 1

INSPECTION & TEST PLAN

PROJECT NAME & DETAILS REF. NO.

REV. NO. 0
DATE :
PAGE : 1 OF 1

ACTIVITY: INSTALLATION AND TESTING OF COLD AND HOT WATER SUPPLY PIPING SYSTEM AND ACCESSORIES (A/G & B/G)

AREA/LOCATION:

ITP approved by CONTRACTOR's QA/QC: ITP approved by consultant:


Signature: Signature:
Date: Date:
INSPECTION LEVEL
SERIAL NO. DESCRIPTION FREQUENCY SPECIFICATION/CRITERIA VERIFICATION RECORD
ITL CONTRACTOR consultant
1 DOCUMENTATION
1.1 Shop Drawing Approval Each Shop Drawing Project Specifications and drawings -- H H

Once (Approval prior to


1.2 Method Statement Approval Project Specifications and drawings -- H H
start of activity)
2 MATERIAL INSPECTION
2.1 Check the Material as per approved submittal. Each Delivery Project Specifications and drawings -- H H
3 INSTALLATION INSPECTION

Check the installation as per approved drawing. Check the physical Area / Room Wise or As
3.1 Project Specifications and drawings -- H H
Installation of equipment. instructed by consultant.

4 TESTING & COMMISSIONING

As instructed by
4.1 Perform the operation test. Check for leaks. consultant & For whole Project Specifications and drawings -- H W100
system at the end.

5 AS BUILT DRAWING

5.1 Maintain site as built drawing Continually Project Specifications and drawings -- H R

6 CLOSE OUT
Project Specifications and drawings
6.1 Close out non conformance reports. Each NCR -- H R
Project Specifications and drawings

7 Handover to main Contractor At End of Work Project Specifications and drawings -- H R


LEGEND: H: HOLD W: WITNESS S: SURVEILLANCE R: REVIEW
ITP Sign-Off post completion of Works
CONTRACTOR APPROVAL consultant APPROVAL

NAME : NAME :

SIGN : SIGN :
DATE: DATE:

PAGE 1 of 1

You might also like