Scribd Logo
Upload

Welcome to Scribd!

  • 38 views

    BWC B Sample

    Uploaded by

    مختبر الحرمين
    This document summarizes test results for a bituminous wearing course sample. It includes details of an extraction test to determine the bitumen content, which was found to be 4.4-5.2%. A grain size analysis of the aggregate found it to be within specification limits. Additional tests measured the specific gravity, voids, stability, and flow of specimens to ensure quality of the mix for use in road construction projects in Makkah by Al-Haramin Company.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    BWC B Sample

    Uploaded by

    مختبر الحرمين
    38 views6 pages
    This document summarizes test results for a bituminous wearing course sample. It includes details of an extraction test to determine the bitumen content, which was found to be 4.4-5.2%. A grain size analysis of the aggregate found it to be within specification limits. Additional tests measured the specific gravity, voids, stability, and flow of specimens to ensure quality of the mix for use in road construction projects in Makkah by Al-Haramin Company.

    Original Title

    Bwc b Sample

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes test results for a bituminous wearing course sample. It includes details of an extraction test to determine the bitumen content, which was found to be 4.4-5.2%. A grain size analysis of the aggregate found it to be within specification limits. Additional tests measured the specific gravity, voids, stability, and flow of specimens to ensure quality of the mix for use in road construction projects in Makkah by Al-Haramin Company.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    38 views6 pages

    BWC B Sample

    Uploaded by

    مختبر الحرمين
    This document summarizes test results for a bituminous wearing course sample. It includes details of an extraction test to determine the bitumen content, which was found to be 4.4-5.2%. A grain size analysis of the aggregate found it to be within specification limits. Additional tests measured the specific gravity, voids, stability, and flow of specimens to ensure quality of the mix for use in road construction projects in Makkah by Al-Haramin Company.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 6

    Extraction for Bituminous Mix

    CONSULTANT: AL-AMRO Group Consulting Engineering

    PROJECT:

    CONTACTOR: AL-HARAMIN COMPANY

    Description of Sample BITUMINOUS WEARING COURSE CLASS - B Sample No:

    Location: Date Tested

    Date Sampled: Tested by:

    Bituminous Content ( Extraction Test)


    Sample No. 1

    A. Weight of Sample Before Test, gm

    B. Weight of Sample After Test, gm

    C. Weight of Filter Before Test, gm

    D. Weight of Filter After Test, gm

    E. Weight of Ash After Test, gm E=D-C

    F. Total Weight of Aggregatre, gm F=B+E

    G. Loss of Weight, gm G=A-F

    H. Bit. By Weight of Mix, % ( 4.8 +- 0.40 ) H = (G / A)*100

    I. Average Bit. Weight of Mix, % 4.4 -- 5.2

    Grain Size Analysis of Aggregate


    Oven Dry gms JOB MIX LIMITS Wash Oven Dry
    Sieve Size Cum.Wt.Ret. % JMF Specifications
    Inch mm gm Passing Lower Higher Lower Higher

    3/4" 19.000 95 100 100 100

    1/2" 12.500 87 97 90 100

    3/8" 9.500 - - 78 83

    No.4 4.750 50 60 46 60

    No.10 2.000 33 41 30 42

    No.40 0.425 14 21 14.0 25

    No.80 0.180 8 15 8.0 16

    No.200 0.075 3.0 6.0 3.0 7.0

    Pan

    Wash
    Total
    CONTRACTOR MATERIAL ENGINEER
    CONSULTANT: Euro Group Consulting Engineering
    PROJECT: Completion of Some Roads in Makkah Region ( Group - 14 )
    CONTACTOR: Mobco Civil Construciton

    Description of Sample BITUMINOUS WEARING COURSE CLASS - A Sample No:

    Location: SHAKSAN - HARAMAIN PLANT Date Tested :

    Date Sampled: 12/30/1899 Tested by:

    1. Specimen No. 1 2 3 4 5 6

    2. Wt. Dry in Air,gm

    3. Wt. Surf. Dry in Air,gm

    4. Wt. In Water, gm

    5. Wt. Of Displacved Water, gm

    6. Specific Gravity (Gmb)

    7. Ave. Specific Gravity (Gmb)

    8. Bit. % by Vol. (Vea)

    9. % Voids (Pa)

    10. % Voids Agg. Total (Vma)

    11. % VFA Filled

    12. Dial Reading (Stability)

    13. Stability Measured, kg

    15. Hieght of Specimen,mm

    16. Correction Factor 1.00 1.00 1.00 1.00 1.00 1.00

    17. Corrected Stability, kg

    18. Ave. Stability, kg

    19. Loss of Stability, %

    20. Flow, mm Failure

    21. Ave. Flow,mm


    CONTRACTOR MATERIAL ENGINEER
    AL HARAMAIN CO. for COMMERCE & CONTRACTING

    Run Time: 01/23/2023 / 08:15:28 File Name: 640278428.xls / Sheet3 Page: 4 of 6


    AL HARAMAIN CO. for COMMERCE & CONTRACTING

    Run Time: 01/23/2023 / 08:15:28 File Name: 640278428.xls / Sheet4 Page: 5 of 6


    AL HARAMAIN CO. for COMMERCE & CONTRACTING

    Run Time: 01/23/2023 / 08:15:28 File Name: 640278428.xls / Sheet5 Page: 6 of 6

    You might also like