This document provides a technical assessment for Grade 8 students on technical and livelihood education (TLE). It describes 10 tools and asks students to identify each tool and classify it. It also provides 20 fill-in-the-blank questions about computer parts and cleaning. Finally, it has a 30 item matching question to match terms to their definitions.
This document provides a technical assessment for Grade 8 students on technical and livelihood education (TLE). It describes 10 tools and asks students to identify each tool and classify it. It also provides 20 fill-in-the-blank questions about computer parts and cleaning. Finally, it has a 30 item matching question to match terms to their definitions.
This document provides a technical assessment for Grade 8 students on technical and livelihood education (TLE). It describes 10 tools and asks students to identify each tool and classify it. It also provides 20 fill-in-the-blank questions about computer parts and cleaning. Finally, it has a 30 item matching question to match terms to their definitions.
This document provides a technical assessment for Grade 8 students on technical and livelihood education (TLE). It describes 10 tools and asks students to identify each tool and classify it. It also provides 20 fill-in-the-blank questions about computer parts and cleaning. Finally, it has a 30 item matching question to match terms to their definitions.
Download as DOCX, PDF, TXT or read online from Scribd
Download as docx, pdf, or txt
You are on page 1/ 2
PAMBISAN NATIONAL HIGH SCHOOL
Assessment Grade 8 TLE Quarter 4
Direction: Identify the correct tool that is being described by the following statements. After identifying the tool, classify it as ESD, Hand Tool , Cleaning Tool or Diagnostic Tool. Write your answer in your answer sheet. 1. Used to strip and cut wires. (_______________, ______________) 2. Used to retrieve parts from location that are to small for your hand to fit. (_______________, ______________) 3. Used to loosen or tighten slotted screws. (_______________, ______________) 4. Used to loosen or tighten screws that have a star-like depression on the top, a feature that is mainly found on laptop. (_______________, ______________) 5. Used to blow away dust and debris from different computer parts without touching the components. (_______________, ______________) 6. Used to light up areas that you cannot see well. (_______________, ______________) 7. Used to hold small parts. (_______________, ______________) 8. Used to test the integrity of circuits and the quality of electricity in computer components. (_______________, ______________) 9. Used to clean different computer components without scratching or leaving debris. (_______________, ______________) 10. Used to test the functionality of computer ports. (_______________, ______________)
Fill in the blanks. Choose your answer from the box. Write your answers in your answer sheet.
Hex driver isopropyl distilled lead
Four insulator Philips hand tools counter clockwise Clockwise equalize safety
11. The purpose of an antistatic wrist strap is to ________ the electrical charge between you and the equipment. 12. Turn the screwdriver _________ to tighten the screw 13. Turn the screwdriver ________________ to loosen the screw. 14. Use a ________ head screwdriver with crosshead screws. 15. On electrical components, an excessive buildup of dust will act like an _________ and trap the heat. 16. When compressed air is used to clean inside the computer, the air should be blown around the components with a minimum distance of ______ inches from the nozzle. 17. Pencils should not be used inside the computer to change the setting of switches or to pry off jumpers because the tip contains _____ which can act as a conductor and may damage the computer components. 18. To clean the screens of CRT monitors, dampen a soft, clean, lint-free cloth with _______ water and wipe the screen from top to bottom. 19. Clean the contacts on components with _________ alcohol. 20. Use a __________ to loosen and tighten bolts that have a hexagonal (six-sided) head.
Matching Type. Match column A with column B. Write the letter of your answer in your notebook. Column A Column B ___21. These chips contain instructions A. Storage drive that can be directly accessed B SCSI Interface by the CPU. C. IDE ___22. A 40-pin connector that connects D. Dual Inline Package hard disk drives to the computer. E. Hard drive ___23. It reads or writes information on F. Portable storage drives magnetic or optical storage media. G. ROM __24. Sometimes referred to as removable H. Solid State Drive drives and can be used on multiple I. Memory computers. J. ROM chips ___25. A drive controller interface that can connect both internal and external drives. __26. It is often configured as the first drive in the boot sequence. ___27. It can be installed as a replacement for magnetic drives. ___28. Retain their contents even when the computer is powered down. ___29. It is intended to store data temporarily. ___30. Another term for individual memory chips.
