EI6703 FIBRE OPTICS AND LASER INSTRUMENTS LT P C

3 0 0 3

OBJECTIVES:
 To expose the basic concepts of optical fibers and their industrial applications.
 To provide adequate knowledge about Industrial application of optical fibres.
 To provide basic concepts of lasers.
 To provide knowledge about Industrial application of lasers
 To provide knowledge about Industrial application of Holography and Medical applications of
Lasers.

UNIT I OPTICAL FIBRES AND THEIR PROPERTIES 9

Principles of light propagation through a fibre - Different types of fibres and their properties, fibre
characteristics – Absorption losses – Scattering losses – Dispersion – Connectors and splicers –
Fibre termination – Optical sources – Optical detectors.

UNIT II INDUSTRIAL APPLICATION OF OPTICAL FIBRES 9

Fibre optic sensors – Fibre optic instrumentation system – Different types of modulators –
Interferometric method of measurement of length – Moire fringes – Measurement of pressure,
temperature, current, voltage, liquid level and strain.

UNIT III LASER FUNDAMENTALS 9

Fundamental characteristics of lasers – Three level and four level lasers – Properties of laser – Laser
modes – Resonator configuration – Q-switching and mode locking – Cavity damping – Types of lasers
– Gas lasers, solid lasers, liquid lasers, semiconductor lasers.

UNIT IV INDUSTRIAL APPLICATION OF LASERS 9

Laser for measurement of distance, length, velocity, acceleration, current, voltage and Atmospheric
effect – Material processing – Laser heating, welding, melting and trimming of material – Removal and
vaporization.

UNIT V HOLOGRAM AND MEDICAL APPLICATIONS 9

Holography – Basic principle - Methods – Holographic interferometry and application, Holography for
non-destructive testing – Holographic components – Medical applications of lasers, laser and tissue
interactive – Laser instruments for surgery, removal of tumors of vocal cards, brain surgery, plastic
surgery, gynaecology and oncology.
TOTAL : 45 PERIODS
OUTCOMES:
 Ability to understand and analyze Instrumentation systems and their applications to various
industries.

TEXT BOOKS:
1. R.P.Khare, Fiber Optics and Optoelectronics, Oxford university press, 2008.
2. J. Wilson and J.F.B. Hawkes, Introduction to Opto Electronics, Prentice Hall of India, 2001.

REFERENCES:
1. Asu Ram Jha, Fiber Optic Technology Applications to commercial, Industrial, Military and Space
Optical systems, PHI learning Private limited, 2009.
2. M. Arumugam, Optical Fibre Communication and Sensors, Anuradha Agencies, 2002.
3. John F. Read, Industrial Applications of Lasers, Academic Press, 1978.

88
EI6704 BIOMEDICAL INSTRUMENTATION L T P C
3 0 0 3
OBJECTIVES:
 To Introduce Fundamentals of Biomedical Engineering
 To study the communication mechanics in a biomedical system with few examples
 To study measurement of certain important electrical and non-electrical parameters
 To understand the basic principles in imaging techniques
 To have a basic knowledge in life assisting and therapeutic devices

UNIT I FUNDAMENTALS OF BIOMEDICAL ENGINEERING 9

Cell and its structure – Resting and Action Potential – Nervous system and its fundamentals - Basic
components of a biomedical system- Cardiovascular systems- Respiratory systems -Kidney and blood
flow - Biomechanics of bone - Biomechanics of soft tissues - Basic mechanics of spinal column and
limbs -Physiological signals and transducers - Transducers – selection criteria – Piezo electric,
ultrasonic transducers - Temperature measurements - Fibre optic temperature sensors.

UNIT II NON ELECTRICAL PARAMETERS MEASUREMENT AND DIAGNOSTIC

PROCEDURES 9
Measurement of blood pressure - Cardiac output - Heart rate - Heart sound - Pulmonary function
measurements – spirometer – Photo Plethysmography, Body Plethysmography – Blood Gas
analysers, pH of blood –measurement of blood pCO2, pO2, finger-tip oxymeter - ESR, GSR
measurements.

UNIT III ELECTRICAL PARAMETERS ACQUISITION AND ANALYSIS 9

Electrodes – Limb electrodes –floating electrodes – pregelled disposable electrodes - Micro, needle
and surface electrodes – Amplifiers, Preamplifiers, differential amplifiers, chopper amplifiers –
Isolation amplifier - ECG – EEG – EMG – ERG – Lead systems and recording methods – Typical
waveforms - Electrical safety in medical environment, shock hazards – leakage current-Instruments
for checking safety parameters of biomedical equipments.

UNIT IV IMAGING MODALITIES AND ANALYSIS 9

Radio graphic and fluoroscopic techniques – Computer tomography – MRI – Ultrasonography –
Endoscopy – Thermography –Different types of biotelemetry systems - Retinal Imaging - Imaging
application in Biometric systems - Analysis of digital images.

UNIT V LIFE ASSISTING, THERAPEUTIC AND ROBOTIC DEVICES 9

Pacemakers – Defibrillators – Ventilators – Nerve and muscle stimulators – Diathermy – Heart – Lung
machine – Audio meters – Dialysers – Lithotripsy - ICCU patient monitoring system - Nano Robots -
Robotic surgery – Advanced 3D surgical techniques- Orthopedic prostheses fixation.

TOTAL: 45 PERIODS
OUTCOMES:
 Ability to understand and analyze Instrumentation systems and their applications to various
industries.

TEXT BOOKS:
1. Leslie Cromwell, Biomedical Instrumentation and Measurement, Prentice hall of India, New Delhi,
2007.
2. Joseph J.carr and John M. Brown, Introduction to Biomedical Equipment Technology, John Wiley
and sons, New York, 4th Edition, 2012.

89
3. Khandpur R.S, Handbook of Biomedical Instrumentation, , Tata McGraw-Hill, New Delhi, 2nd
Edition, 2003.

REFERENCES:
1. John G. Webster, Medical Instrumentation Application and Design, John Wiley and sons, New
York, 1998.
2. Duane Knudson, Fundamentals of Biomechanics, Springer, 2nd Edition, 2007.
3. Suh, Sang, Gurupur, Varadraj P., Tanik, Murat M., Health Care Systems, Technology and
Techniques, Springer, 1st Edition, 2011.
4. Ed. Joseph D. Bronzino, The Biomedical Engineering Hand Book, Third Edition, Boca Raton, CRC
Press LLC, 2006.
5. M.Arumugam, ‘Bio-Medical Instrumentation’, Anuradha Agencies, 2003.

EE6004 FLEXIBLE AC TRANSMISSION SYSTEMS LTPC

3003
OBJECTIVES:
 To introduce the reactive power control techniques
 To educate on static VAR compensators and their applications
 To provide knowledge on Thyristor controlled series capacitors
 To educate on STATCOM devices
 To provide knowledge on FACTS controllers

UNIT I INTRODUCTION 9
Reactive power control in electrical power transmission lines -Uncompensated transmission line -
series compensation – Basic concepts of Static Var Compensator (SVC) – Thyristor Controlled Series
capacitor (TCSC) – Unified power flow controller (UPFC).

UNIT II STATIC VAR COMPENSATOR (SVC) AND APPLICATIONS 9

Voltage control by SVC – Advantages of slope in dynamic characteristics – Influence of SVC on
system voltage – Design of SVC voltage regulator –Modelling of SVC for power flow and fast transient
stability – Applications: Enhancement of transient stability – Steady state power transfer –
Enhancement of power system damping.

UNIT III THYRISTOR CONTROLLED SERIES CAPACITOR (TCSC) AND

APPLICATIONS 9
Operation of the TCSC – Different modes of operation – Modelling of TCSC – Variable reactance
model – Modelling for Power Flow and stability studies. Applications: Improvement of the system
stability limit – Enhancement of system damping.

UNIT IV VOLTAGE SOURCE CONVERTER BASED FACTS CONTROLLERS 9

Static Synchronous Compensator (STATCOM) – Principle of operation – V-I Characteristics.
Applications: Steady state power transfer-enhancement of transient stability - prevention of voltage
instability. SSSC-operation of SSSC and the control of power flow –modelling of SSSC in load flow
and transient stability studies.

UNIT V CO-ORDINATION OF FACTS CONTROLLERS 9

Controller interactions – SVC – SVC interaction – Co-ordination of multiple controllers using linear
control techniques – Control coordination using genetic algorithms.
90
 TOTAL : 45 PERIODS

OUTCOMES:
 Ability to understand and analyze power system operation, stability, control and protection.

TEXT BOOKS:
1. R.Mohan Mathur, Rajiv K.Varma, “Thyristor – Based Facts Controllers for Electrical Transmission
Systems”, IEEE press and John Wiley & Sons, Inc, 2002.
2. Narain G. Hingorani, “Understanding FACTS -Concepts and Technology of Flexible AC
Transmission Systems”, Standard Publishers Distributors, Delhi- 110 006, 2011.
3. K.R.Padiyar,” FACTS Controllers in Power Transmission and Distribution”, New Age
International(P) Limited, Publishers, New Delhi, 2008.

REFERENCES:
1. A.T.John, “Flexible A.C. Transmission Systems”, Institution of Electrical and Electronic Engineers
(IEEE), 1999.
2. V.K.Sood,HVDC and FACTS controllers – Applications of Static Converters in Power System,
APRIL 2004 , Kluwer Academic Publishers, 2004.
3. Xiao – Ping Zang, Christian Rehtanz and Bikash Pal, “Flexible AC Transmission System:
Modelling and Control” Springer, 2012.

EE6005 POWER QUALITY LTPC

300 3
OBJECTIVES:
 To introduce the power quality problem
 To educate on production of voltages sags, over voltages and harmonics and methods
of control.
 To study overvoltage problems
 To study the sources and effect of harmonics in power system
 To impart knowledge on various methods of power quality monitoring.

UNIT I INTRODUCTION TO POWER QUALITY 9

Terms and definitions: Overloading - under voltage - over voltage. Concepts of transients - short
duration variations such as interruption - long duration variation such as sustained interruption. Sags
and swells - voltage sag - voltage swell - voltage imbalance - voltage fluctuation - power frequency
variations. International standards of power quality. Computer Business Equipment Manufacturers
Associations (CBEMA) curve.

UNIT II VOLTAGE SAGS AND INTERRUPTIONS 9

Sources of sags and interruptions - estimating voltage sag performance. Thevenin’s equivalent source
- analysis and calculation of various faulted condition. Voltage sag due to induction motor starting.
Estimation of the sag severity - mitigation of voltage sags, active series compensators. Static transfer
switches and fast transfer switches.

UNIT III OVERVOLTAGES 9

Sources of over voltages - Capacitor switching – lightning - ferro resonance. Mitigation of voltage
swells - surge arresters - low pass filters - power conditioners. Lightning protection – shielding - line

91
arresters - protection of transformers and cables. An introduction to computer analysis tools for
transients, PSCAD and EMTP.

UNIT IV HARMONICS 9
Harmonic sources from commercial and industrial loads, locating harmonic sources.Power system
response characteristics - Harmonics Vs transients. Effect of harmonics - harmonic distortion - voltage
and current distortion - harmonic indices - inter harmonics – resonance. Harmonic distortion
evaluation - devices for controlling harmonic distortion - passive and active filters. IEEE and IEC
standards.

UNIT V POWER QUALITY MONITORING 9

Monitoring considerations - monitoring and diagnostic techniques for various power quality problems -
modeling of power quality (harmonics and voltage sag) problems by mathematical simulation tools -
power line disturbance analyzer – quality measurement equipment - harmonic / spectrum analyzer -
flicker meters - disturbance analyzer. Applications of expert systems for power quality monitoring.

TOTAL : 45 PERIODS
OUTCOMES:
 Ability to understand and analyze power system operation, stability, control and protection.

TEXT BOOKS:
1. Roger. C. Dugan, Mark. F. McGranagham, Surya Santoso, H.Wayne Beaty, ‘Electrical Power
Systems Quality’ McGraw Hill,2003.(For Chapters1,2,3, 4 and 5).
2. Eswald.F.Fudis and M.A.S.Masoum, “Power Quality in Power System and Electrical Machines,”
Elseviar Academic Press, 2013.
3. J. Arrillaga, N.R. Watson, S. Chen, 'Power System Quality Assessment', Wiley, 2011.

REFERENCES:
1. G.T. Heydt, 'Electric Power Quality', 2nd Edition. (West Lafayette, IN, Stars in a
Circle Publications, 1994). (For Chapter 1, 2, 3 and 5)
2. M.H.J Bollen, ‘Understanding Power Quality Problems: Voltage Sags and Interruptions’, (New
York: IEEE Press, 1999). (For Chapters 1, 2, 3 and 5)
3. G.J.Wakileh, “Power Systems Harmonics – Fundamentals, Analysis and Filter Design,” Springer
2007.
4. E.Aeha and M.Madrigal, “Power System Harmonics, Computer Modelling and Analysis, “ Wiley
India, 2012.
5. R.S.Vedam, M.S.Sarma, “Power Quality – VAR Compensation in Power Systems,” CRC Press
2013.
6. C. Sankaran, ‘Power Quality’, CRC press, Taylor & Francis group, 2002.

92
EE6006 APPLIED SOFT COMPUTING LTPC
300 3
OBJECTIVES:
 To expose the students to the concepts of feed forward neural networks.
 To provide adequate knowledge about feedback neural networks
 To provide adequate knowledge about fuzzy and neuro-fuuzy systems
 To provide comprehensive knowledge of fuzzy logic control to real time systems.
 To provide adequate knowledge of genetic algorithms and its application to economic dispatch
and unit commitment problems.

UNIT I ARCHITECTURES – ANN 9

Introduction – Biological neuron – Artificial neuron – Neuron model – Supervised and unsupervised
learning- Single layer – Multi layer feed forward network – Learning algorithm- Back propagation
network.

UNIT II NEURAL NETWORKS FOR CONTROL 9

Feedback networks – Discrete time Hopfield networks – Transient response of continuous time
system – Applications of artificial neural network - Process identification – Neuro controller for inverted
pendulum.

UNIT III FUZZY SYSTEMS 9

Classical sets – Fuzzy sets – Fuzzy relations – Fuzzification – Defuzzification – Fuzzy rules -
Membership function – Knowledge base – Decision-making logic – Introduction to neuro fuzzy
system- Adaptive fuzzy system.

UNIT IV APPLICATION OF FUZZY LOGIC SYSTEMS 9

Fuzzy logic control: Home heating system - liquid level control - aircraft landing- inverted pendulum –
fuzzy PID control, Fuzzy based motor control.

UNIT V GENETIC ALGORITHMS 9

Introduction-Gradient Search – Non-gradient search – Genetic Algorithms: binary and real
representation schemes, selection methods, crossover and mutation operators for binary and real
coding - constraint handling methods – applications to economic dispatch and unit commitment
problems.
TOTAL: 45 PERIODS
OUTCOMES:

 Ability to understand and apply basic science, circuit theory, Electro-magnetic field theory
control theory and apply them to electrical engineering problems.
 To understand and apply computing platform and software for engineering problems.

TEXT BOOKS:
1. Laurance Fausett, Englewood cliffs, N.J., ‘Fundamentals of Neural Networks’,Pearson Education,
1992.
2. Timothy J. Ross, ‘Fuzzy Logic with Engineering Applications’, Tata McGraw Hill, 1997.
3. S.N.Sivanandam and S.N.Deepa, Principles of Soft computing, Wiley India Edition, 2nd Edition,
2013.

REFERENCES:
1. Simon Haykin, ‘Neural Networks’, Pearson Education, 2003.
2. John Yen & Reza Langari, ‘Fuzzy Logic – Intelligence Control & Information’, Pearson Education,
New Delhi, 2003.

93
3. M.Gen and R,Cheng, Genetic algorithms and Optimization, Wiley Series in Engineering Design
and Automation, 2000.
4. Hagan, Demuth, Beale, “ Neural Network Design”, Cengage Learning, 2012.
5. N.P.Padhy, “ Artificial Intelligence and Intelligent Systems”, Oxford, 2013.
6. William S.Levine, “Control System Advanced Methods,” The Control Handbook
CRC Press, 2011.

GE6081 FUNDAMENTALS OF NANOSCIENCE LTPC

3 003
OBJECTIVES:
To learn about basis of nanomaterial science, preparation method, types and application

UNIT I INTRODUCTION 8
Nanoscale Science and Technology- Implications for Physics, Chemistry, Biology and Engineering-
Classifications of nanostructured materials- nano particles- quantum dots, nanowires-ultra-thinfilms-
multilayered materials. Length Scales involved and effect on properties: Mechanical, Electronic,
Optical, Magnetic and Thermal properties. Introduction to properties and motivation for study
(qualitative only).

UNIT II GENERAL METHODS OF PREPARATION 9

Bottom-up Synthesis-Top-down Approach: Co-Precipitation, Ultrasonication, Mechanical Milling,
Colloidal routes, Self-assembly, Vapour phase deposition, MOCVD, Sputtering, Evaporation,
Molecular Beam Epitaxy, Atomic Layer Epitaxy, MOMBE.

UNIT III NANOMATERIALS 12

Nanoforms of Carbon - Buckminster fullerene- graphene and carbon nanotube, Single wall carbon
Nanotubes (SWCNT) and Multi wall carbon nanotubes (MWCNT)- methods of synthesis(arc-growth,
laser ablation, CVD routes, Plasma CVD), structure-property Relationships applications- Nanometal
oxides-ZnO, TiO2,MgO, ZrO2, NiO, nanoalumina, CaO, AgTiO2, Ferrites, Nanoclays-
functionalization and applications-Quantum wires, Quantum dots-preparation, properties and
applications.

UNIT IV CHARACTERIZATION TECHNIQUES 9

X-ray diffraction technique, Scanning Electron Microscopy - environmental techniques, Transmission
Electron Microscopy including high-resolution imaging, Surface Analysis techniques- AFM, SPM,
STM, SNOM, ESCA, SIMS-Nanoindentation.

UNIT V APPLICATIONS 7
NanoInfoTech: Information storage- nanocomputer, molecular switch, super chip, nanocrystal,
Nanobiotechlogy: nanoprobes in medical diagnostics and biotechnology, Nano medicines, Targetted
drug delivery, Bioimaging - Micro Electro Mechanical Systems (MEMS), Nano Electro Mechanical
Systems (NEMS)- Nanosensors, nano crystalline silver for bacterial inhibition, Nanoparticles for
sunbarrier products - In Photostat, printing, solar cell, battery.

TOTAL : 45 PERIODS
OUTCOMES:
 Will familiarize about the science of nanomaterials
 Will demonstrate the preparation of nanomaterials
 Will develop knowledge in characteristic nanomaterial

94
TEXT BOOKS :
1. A.S. Edelstein and R.C. Cammearata, eds., “Nanomaterials: Synthesis, Properties
and Applications”, Institute of Physics Publishing, Bristol and Philadelphia, 1996.
2. N John Dinardo, “Nanoscale Charecterisation of surfaces & Interfaces”, 2nd edition,
Weinheim Cambridge, Wiley-VCH, 2000.

REFERENCES:
1. G Timp, “Nanotechnology”, AIP press/Springer, 1999.
2. Akhlesh Lakhtakia,“The Hand Book of Nano Technology, Nanometer Structure,
Theory, Modeling and Simulations”. Prentice-Hall of India (P) Ltd, New Delhi, 2007.

IC6002 SYSTEM IDENTIFICATION AND ADAPTIVE CONTROL LT P C

3 003
OBJECTIVES:
 To introduce Non parametric methods
 To impart knowledge on parameter estimation methods
 To impart knowledge on Recursive identification methods
 To impart knowledge on Adaptive control schemes
 To introduce stability, Robustness and Applications of adaptive control method

UNIT I NON PARAMETRIC METHODS 9

Non parametric methods: Transient analysis–frequency analysis–Correlation analysis–Spectral
analysis.

UNIT II PARAMETER ESTIMATION METHODS 9

Least square estimation – best linear unbiased estimation under linear constraints – updating the
parameter estimates for linear regression models–prediction error methods: description of
prediction methods – optimal prediction – relation between prediction error methods and
other identification methods – theoretical analysis - Instrumental variable methods: Description of
instrumental variable methods – Input signal design for identification.

UNIT III RECURSIVE IDENTIFICATION METHODS 9

The recursive least square method – the recursive instrumental variable methods- the recursive
prediction error methods – Maximum likelihood. Identification of systems operating in closed loop:
Identifiability considerations – direct identification – indirect identification.

UNIT IV ADAPTIVE CONTROL SCHEMES 9

Introduction – Types of adaptive control–Gain scheduling controller–Model reference adaptive
control schemes–Self tuning controller–MRAC and STC: Approaches–The Gradient approach –
Lyapunov functions – Passivity theory – pole placement method – Minimum variance control –
Predictive control.

UNIT V ISSUES INADAPTIVE CONTROL AND APPLICATIONS 9

Stability – Convergence – Robustness –Applications of adaptive control.
TOTAL: 45 PERIODS
OUTCOMES:
 Ability to apply advanced control theory to practical engineering problems.
95
 TEXT BOOKS:
1. Soder Storm T and Peter Stoica, System Identification, Prentice Hall International,1989.
nd
2. Astrom,K.J. and Wittenmark,B., “Adaptive Control”,Pearson Education, 2 Edition, 2001.
3. Sastry,S. and Bodson, M.,“ Adaptive Control– Stability, Convergence and Robustness”, Prentice
Hall inc., New Jersey, 1989.

REFERENCES:
1. Ljung L, System Identification: Theory for the user, Prentice Hall, Engle wood Cliffs,1987.
2. Bela.G.Liptak., “Process Control and Optimization”., Instrument Engineers’ Handbook., volume
2, CRC press and ISA, 2005.
3. William S.Levine, “Control Systems Advanced Methods, the Control Handbook, CRC Press,
2011.

EE6007 MICRO ELECTRO MECHANICAL SYSTEMS LT P C

3003
OBJECTIVES:
 To provide knowledge of semiconductors and solid mechanics to fabricate MEMS devices.
 To educate on the rudiments of Micro fabrication techniques.
 To introduce various sensors and actuators
 To introduce different materials used for MEMS
 To educate on the applications of MEMS to disciplines beyond Electrical and Mechanical
engineering.

UNIT I INTRODUCTION 9
Intrinsic Characteristics of MEMS – Energy Domains and Transducers- Sensors and Actuators –
Introduction to Micro fabrication - Silicon based MEMS processes – New Materials – Review of
Electrical and Mechanical concepts in MEMS – Semiconductor devices – Stress and strain analysis –
Flexural beam bending- Torsional deflection.

UNIT II SENSORS AND ACTUATORS-I 9

Electrostatic sensors – Parallel plate capacitors – Applications – Interdigitated Finger capacitor –
Comb drive devices – Micro Grippers – Micro Motors - Thermal Sensing and Actuation – Thermal
expansion – Thermal couples – Thermal resistors – Thermal Bimorph - Applications – Magnetic
Actuators – Micromagnetic components – Case studies of MEMS in magnetic actuators- Actuation
using Shape Memory Alloys.

UNIT III SENSORS AND ACTUATORS-II 9

Piezoresistive sensors – Piezoresistive sensor materials - Stress analysis of mechanical elements –
Applications to Inertia, Pressure, Tactile and Flow sensors – Piezoelectric sensors and actuators –
piezoelectric effects – piezoelectric materials – Applications to Inertia , Acoustic, Tactile and Flow
sensors.

UNIT IV MICROMACHINING 9
Silicon Anisotropic Etching – Anisotrophic Wet Etching – Dry Etching of Silicon – Plasma Etching –
Deep Reaction Ion Etching (DRIE) – Isotropic Wet Etching – Gas Phase Etchants – Case studies -
Basic surface micro machining processes – Structural and Sacrificial Materials – Acceleration of
sacrificial Etch – Striction and Antistriction methods – LIGA Process - Assembly of 3D MEMS –
Foundry process.
96
UNIT V POLYMER AND OPTICAL MEMS 9
Polymers in MEMS– Polimide - SU-8 - Liquid Crystal Polymer (LCP) – PDMS – PMMA – Parylene –
Fluorocarbon - Application to Acceleration, Pressure, Flow and Tactile sensors- Optical MEMS –
Lenses and Mirrors – Actuators for Active Optical MEMS.
TOTAL : 45 PERIODS

OUTCOMES:

 Ability to understand the operation of micro devices, micro systems and their applications.
 Ability to design the micro devices, micro systems using the MEMS fabrication process.

TEXT BOOKS:
1. Chang Liu, ‘Foundations of MEMS’, Pearson Education Inc., 2012.
2. Stephen D Senturia, ‘Microsystem Design’, Springer Publication, 2000.
3. Tai Ran Hsu, “MEMS & Micro systems Design and Manufacture” Tata McGraw Hill,
New Delhi, 2002.

REFERENCES:
1. Nadim Maluf,“ An Introduction to Micro Electro Mechanical System Design”, Artech
House, 2000.
2. Mohamed Gad-el-Hak, editor, “ The MEMS Handbook”, CRC press Baco Raton, 2001.
3. Julian w. Gardner, Vijay K. Varadan, Osama O.Awadelkarim, Micro Sensors MEMS and
Smart Devices, John Wiley & Son LTD, 2002.
4. James J.Allen, Micro Electro Mechanical System Design, CRC Press Publisher, 2005.
5. Thomas M.Adams and Richard A.Layton, “Introduction MEMS, Fabrication and Application,”
Springer, 2010.

EE6008 MICROCONTROLLER BASED SYSTEM DESIGN LT PC

3 0 03
OBJECTIVES:
 To introduce the architecture of PIC microcontroller
 To educate on use of interrupts and timers
 To educate on the peripheral devices for data communication and transfer
 To introduce the functional blocks of ARM processor
 To educate on the architecture of ARM processors

UNIT I INTRODUCTION TO PIC MICROCONTROLLER 9

Introduction to PIC Microcontroller–PIC 16C6x and PIC16C7x Architecture–PIC16cxx–- Pipelining -
Program Memory considerations – Register File Structure - Instruction Set - Addressing modes –
Simple Operations.
UNIT II INTERRUPTS AND TIMER 9
PIC micro controller Interrupts- External Interrupts-Interrupt Programming–Loop time subroutine -
Timers-Timer Programming– Front panel I/O-Soft Keys– State machines and key switches– Display of
Constant and Variable strings.

UNIT III PERIPHERALS AND INTERFACING 9

2
I C Bus for Peripherals Chip Access– Bus operation-Bus subroutines– Serial EEPROM—Analog to
97
Digital Converter–UART-Baud rate selection–Data handling circuit–Initialization - LCD and keyboard
Interfacing -ADC, DAC, and Sensor Interfacing.

UNIT IV INTRODUCTION TO ARM PROCESSOR 9

ARM Architecture –ARM programmer’s model –ARM Development tools- Memory Hierarchy –ARM
Assembly Language Programming–Simple Examples–Architectural Support for Operating systems.

UNIT V ARM ORGANIZATION 9

3-Stage Pipeline ARM Organization– 5-Stage Pipeline ARM Organization–ARM Instruction
Execution- ARM Implementation– ARM Instruction Set– ARM coprocessor interface– Architectural
support for High Level Languages – Embedded ARM Applications.

TOTAL: 45 PERIODS
OUTCOMES:
 To understand and apply computing platform and software for engineering problems.
 To understand ethical issues, environmental impact and acquire management skills.

TEXT BOOKS:
1. Peatman,J.B., “Design with PIC Micro Controllers”PearsonEducation,3rdEdition, 2004.
2. Furber,S., “ARM System on Chip Architecture” Addison Wesley trade Computer Publication,
2000.

REFERENCE:
1. Mazidi, M.A.,“PIC Microcontroller” Rollin Mckinlay, Danny causey Printice Hall of India, 2007.

EE6009 POWER ELECTRONICS FOR RENEWABLE ENERGY SYSTEMS LT P C

3003
OBJECTIVES:
 To Provide knowledge about the stand alone and grid connected renewable energy systems.
 To equip with required skills to derive the criteria for the design of power converters for renewable
energy applications.
 To analyse and comprehend the various operating modes of wind electrical generators and solar
energy systems.
 To design different power converters namely AC to DC, DC to DC and AC to AC converters for
renewable energy systems.
 To develop maximum power point tracking algorithms.

UNIT I INTRODUCTION 9
Environmental aspects of electric energy conversion: impacts of renewable energy generation on
environment (cost-GHG Emission) - Qualitative study of different renewable energy resources: Solar,
wind, ocean, Biomass, Fuel cell, Hydrogen energy systems and hybrid renewable energy systems.

UNIT II ELECTRICAL MACHINES FOR RENEWABLE ENERGY CONVERSION 9

Reference theory fundamentals-principle of operation and analysis: IG, PMSG, SCIG and DFIG.

98