Catalogue - Sundez Brine To Water Heat Pump 3 9kw

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

Ground Source Heat Pump

Geothermal Heat Pump


Brine to Water Heat Pump

ZHONGSHAN SUNDEZ ECO-ENERGY SOLUTION CO.,LTD.


www.sundez.cn E-mail:[email protected]
Ground Source Heat Pump/
Geothermal Heat Pump
for House heating
Sundez 2013 new brine to water heat pump allows you to combine a water based heating system with
a modern heat producing device. It saves energy consumption up to 80% compared with electric
heaters.
The ultra quiet design makes the whole compressor and heat pump system on a floating plate, leads
to a compete isolation from the heat pump bottom, and reduce vibration and noise at the most extent.
That is to say, Sundez new brine to water heat pump is ideal for indoor installation.
The big controller screen with blue LED backlight and simple operation gives the best experience to
users.

Two colours for your choice:

Silver front panel + black casing Silver front panel + white casing

Installation Example

master controller/ Heat pump


thermostat controller

Buffer Tank

Fan Coil
Water
Distributor

Pump
Ground loop

Pump Radiator
Pump

Valve Pump

Under Floor Heating


High Efficiency Reliable

1. High COP (take model SDBW-60 for example) 1. Comprehensive and careful protection & functions to
6 protect safe operation, such as over high/low system
pressure, phase sequence, anti-freezing protection
5 4.6 for evaporator etc.
4 3.8
COP

3.0
3
2. Famous brand Toshiba R410A compressor.
2

1
R410A with high efficiency
0
B-5/W55 B0/W50 B0/W35
Low vibration

2. Big heat exchangers to extract more heat from the Low noise
ground.

Excellent tube-in-shell heat exchanger as condenser,


especially designed for R410A heat pump system. 3. Emerson thermostatic expansion valve with reliable
function and long life.
Copper tubes with surface
treatment to enlarge heat
exchange area.
Especially for R410A system
Wide openings
Accurate throttling

Tube-in-tube heat exchanger, copper tubes inside


with enlarged heat exchange area.

4. The condenser and evaporator are designed for R410A,


Copper tubes with bearing high pressure, also with outstanding feature
enlarged heat exchange
area treatment. for anti-corrosion.

Strict Noise Control

Intelligent Control Noise down to 30dB(A)

1. Double layers noise absorption


Touch key material attached fully inside
the casing. The harder layer can
Big screen absorb high frequency noise, and
the softer layer can absorb lower
clear display
frequency noise.

2. Isolation design for the compressor system.


The whole compressor system is on a floating plate,
isolated from the casing and the bottom plate,
1. Extremely simple operation. supported by the completely soft rubber feet. Such
a design isolates most of the vibration from the
2. With timer function.
compressor system to the bottom plate and the
3. Can work with master controller or room thermostat. floor.

4. Anti-frozen function for cooling mode.


5. With auxiliary electric heating function.
6. With control terminal for heating circulation pump
and ground source side circulation pump.
7. With setable anti-frozen protection for ground source The floating plate
side according to user’s climate.
8. With all kinds of protections for compressor.
Datasheet

Model SDBW 30 45 60 90
Power Supply V/ph/Hz 220~240/1/50 220~240/1/50 220~240/1/50 220~240/1/50
Max. heating water temperature DegC 55 55 55 55
Brine heat source temperature range DegC -5~25 -5~25 -5~25 -5~25
Heating capacity at B0/W35 * KW 3.1 4.3 6.2 9.0

COP at B0/W35 * 4.5 4.6 4.5 4.5

Heating capacity at B0/W50 ** KW 2.8 4.0 5.7 8.2

COP at B0/W50 ** 3.5 3.8 3.7 4.0

Heating capacity at B-5/W55 *** KW 2.5 3.6 5.3 6.2

COP at B-5/W55 *** 2.9 3.0 3.0 2.8


Norminal power consumption at B0/W35 KW 0.69 0.93 1.38 2.0

Rated Current at B0/W35 A 3.2 4.3 6.4 9.3


Starting Current A 30.0 32.0 35.0 51.0
Refrigerant R410a R410a R410a R410a
Compressor Style Rotary Rotary Rotary Rotary
Condenser tube-in-shell tube-in-shell tube-in-shell tube-in-shell
Evaporator tube-in-tube tube-in-tube tube-in-tube tube-in-tube
3
Heating water flow rate m /h 0.69 0.84 1.2 1.8
Water pressure drop, condenser Kpa 24 24 24 29
3
Brine flow rate m /h 1.4 1.7 2.5 3.7

Water pressure drop, evaporator Kpa 27 27 28 29

Heating water inlet/outlet dimension Inch 3/4" 3/4" 3/4" 1"

Brine flow inlet/outlet dimension Inch 3/4" 3/4" 3/4" 1"

Running noise dBA 30 30 31 31


Net dimension including rubber feet
mm 625×440×685 625×440×685 625×440×685 625×440×685
HxWxL
Net weight Kg 52 53 55 62
Packing dimension mm 685×500×785 685×500×785 685×500×785 685×500×785
Packing weight Kg 60 61 63 70

Test Condition: B0/W35: brine inlet temperature 0DegC, heating water outlet 35DegC.

ZHONGSHAN SUNDEZ ECO-ENERGY SOLUTION CO.,LTD.


www.sundez.cn E-mail:[email protected]

You might also like