9.

8: Solving Systems with Cramer's Rule

 Learning Objectives
Evaluate 2 × 2 determinants.
Use Cramer’s Rule to solve a system of equations in two variables.
Evaluate 3 × 3 determinants.
Use Cramer’s Rule to solve a system of three equations in three variables.
Know the properties of determinants.

We have learned how to solve systems of equations in two variables and three variables, and by multiple methods: substitution,
addition, Gaussian elimination, using the inverse of a matrix, and graphing. Some of these methods are easier to apply than others
and are more appropriate in certain situations. In this section, we will study two more strategies for solving systems of equations.

Evaluating the Determinant of a 2 × 2 Matrix

A determinant is a real number that can be very useful in mathematics because it has multiple applications, such as calculating area,
volume, and other quantities. Here, we will use determinants to reveal whether a matrix is invertible by using the entries of a square
matrix to determine whether there is a solution to the system of equations. Perhaps one of the more interesting applications,
however, is their use in cryptography. Secure signals or messages are sometimes sent encoded in a matrix. The data can only be
decrypted with an invertible matrix and the determinant. For our purposes, we focus on the determinant as an indication of the
invertibility of the matrix. Calculating the determinant of a matrix involves following the specific patterns that are outlined in this
section.

 FIND THE DETERMINANT OF A 2 × 2 MATRIX

The determinant of a 2 × 2 matrix, given
a b
A =[ ]
c d

is defined as

Notice the change in notation. There are several ways to indicate the determinant, including det(A) and replacing the brackets
in a matrix with straight lines, |A|.

 Example 9.8.1: Finding the Determinant of a 2 × 2 Matrix

Find the determinant of the given matrix.
5 2
A =[ ]
−6 3

Solution
∣ 5 2∣
det(A) = ∣ ∣
∣ −6 3∣

= 5(3) − (−6)(2)

= 27

Using Cramer’s Rule to Solve a System of Two Equations in Two Variables

We will now introduce a final method for solving systems of equations that uses determinants. Known as Cramer’s Rule, this
technique dates back to the middle of the 18th century and is named for its innovator, the Swiss mathematician Gabriel Cramer
(1704-1752), who introduced it in 1750 in Introduction à l'Analyse des lignes Courbes algébriques. Cramer’s Rule is a viable and

Access for free at OpenStax 9.8.1 https://math.libretexts.org/@go/page/1390

efficient method for finding solutions to systems with an arbitrary number of unknowns, provided that we have the same number of
equations as unknowns.
Cramer’s Rule will give us the unique solution to a system of equations, if it exists. However, if the system has no solution or an
infinite number of solutions, this will be indicated by a determinant of zero. To find out if the system is inconsistent or dependent,
another method, such as elimination, will have to be used.
To understand Cramer’s Rule, let’s look closely at how we solve systems of linear equations using basic row operations. Consider a
system of two equations in two variables.
a1 x + b1 y = c1 (1) (9.8.1)

a2 x + b2 y = c2 (2) (9.8.2)

We eliminate one variable using row operations and solve for the other. Say that we wish to solve for x. If Equation 9.8.2 is
multiplied by the opposite of the coefficient of y in Equation 9.8.1, Equation 9.8.1 is multiplied by the coefficient of y in Equation
9.8.2, and we add the two equations, the variable y will be eliminated.

b2 a1 x + b2 b1 y = b2 c1 Multiply R1  by b2

− b1 a2 x − b1 b2 y = −b1 c2 Multiply R2  by  − b1

––––––––––––––––––––––
b2 a1 x − b1 a2 x = b2 c1 − b1 c2

Now, solve for x.

b2 a1 x − b1 a2 x = b2 c1 − b1 c2

x(b2 a1 − b1 a2 ) = b2 c1 − b1 c2

c1 b1
[ ]
b2 c1 − b1 c2 c2 b2
x = =
b2 a1 − b1 a2 a1 b1
[ ]
a2 b2

Similarly, to solve for y ,we will eliminate x.

a2 a1 x + a2 b1 y = a2 c1 Multiply R1  by a2

− a1 a2 x − a1 b2 y = −a1 c2 Multiply R2  by  − a1

–––––––––––––––––––––––
a2 b1 y − a1 b2 y = a2 c1 − a1 c2

Solving for y gives

a2 b1 y − a1 b2 y = a2 c1 − a1 c2

y(a2 b1 − a1 b2 ) = a2 c1 − a1 c2

a1 c1
[ ]
a2 c1 − a1 c2 a1 c2 − a2 c1 a2 c2
y = = =
a2 b1 − a1 b2 a1 b2 − a2 b1 a1 b1
[ ]
a2 b2

Notice that the denominator for both x and y is the determinant of the coefficient matrix.
We can use these formulas to solve for x and y , but Cramer’s Rule also introduces new notation:
D:determinant of the coefficient matrix
D :determinant of the numerator in the solution of x
x

Dx
x = (9.8.3)
D

Dy :determinant of the numerator in the solution of y

Dy
y = (9.8.4)
D

Access for free at OpenStax 9.8.2 https://math.libretexts.org/@go/page/1390

The key to Cramer’s Rule is replacing the variable column of interest with the constant column and calculating the determinants.
We can then express x and y as a quotient of two determinants.

 CRAMER’S RULE FOR 2 × 2 SYSTEMS

Cramer’s Rule is a method that uses determinants to solve systems of equations that have the same number of equations as
variables.
Consider a system of two linear equations in two variables.
a1 x + b1 y = c1

a2 x + b2 y = c2

The solution using Cramer’s Rule is given as

c1 b1
[ ]
Dx c2 b2
x = = ,D ≠0 (9.8.5)
D a1 b1
[ ]
a2 b2

a1 c1
[ ]
Dy a2 c2
y = = ,D ≠0 (9.8.6)
D a1 b1
[ ]
a2 b2

If we are solving for x, the x column is replaced with the constant column. If we are solving for y , the y column is replaced
with the constant column.

 Example 9.8.2: Using Cramer’s Rule to Solve a 2 × 2 System

Solve the following 2 × 2 system using Cramer’s Rule.

12x + 3y = 15

2x − 3y = 13

Solution
Solve for x.
Dx
x =
D

15 3
[ ]
13 −3
=
12 3
[ ]
2 −3

−45 − 39
=
−36 − 6

−84
=
−42

=2

Solve for y .

Access for free at OpenStax 9.8.3 https://math.libretexts.org/@go/page/1390

 Dy
y =
D

12 15
[ ]
2 13
=
12 3
[ ]
2 −3

156 − 30
=
−36 − 6

126
=−
42

= −3

The solution is (2, −3).

 Exercise 9.8.1

Use Cramer’s Rule to solve the 2 × 2 system of equations.

x + 2y = −11

−2x + y = −13

Answer
(3, −7)

Evaluating the Determinant of a 3 × 3 Matrix

Finding the determinant of a 2×2 matrix is straightforward, but finding the determinant of a 3×3 matrix is more complicated. One
method is to augment the 3×3 matrix with a repetition of the first two columns, giving a 3×5 matrix. Then we calculate the sum of
the products of entries down each of the three diagonals (upper left to lower right), and subtract the products of entries up each of
the three diagonals (lower left to upper right). This is more easily understood with a visual and an example.
Find the determinant of the 3×3 matrix.
a1 b1 c1
⎡ ⎤
A = ⎢ a2 b2 c2 ⎥
⎣ ⎦
a3 b3 c3

1. Augment A with the first two columns.

∣ ∣
a1 b1 c1 a1 b1
∣ ∣
det(A) = ∣ a2 b2 c2 a2 b2 ∣
∣ ∣
∣ a3 b3 c3 a3 b3 ∣

2. From upper left to lower right: Multiply the entries down the first diagonal. Add the result to the product of entries down the
second diagonal. Add this result to the product of the entries down the third diagonal.
3. From lower left to upper right: Subtract the product of entries up the first diagonal. From this result subtract the product of
entries up the second diagonal. From this result, subtract the product of entries up the third diagonal.

The algebra is as follows:

|A| = a1 b2 c3 + b1 c2 a3 + c1 a2 b3 − a3 b2 c1 − b3 c2 a1 − c3 a2 b1

Access for free at OpenStax 9.8.4 https://math.libretexts.org/@go/page/1390

  Example 9.8.3: Finding the Determinant of a 3 × 3 Matrix

Find the determinant of the 3 × 3 matrix given

0 2 1
⎡ ⎤
A =⎢3 −1 1⎥
⎣ ⎦
4 0 1

Solution
Augment the matrix with the first two columns and then follow the formula. Thus,
∣ ∣
0 2 1 0 2
∣ ∣
|A| = ∣ 3 −1 1 3 −1 ∣
∣ ∣
∣ 4 0 1 4 0 ∣

= 0(−1)(1) + 2(1)(4) + 1(3)(0) − 4(−1)(1) − 0(1)(0) − 1(3)(2)

= 0 +8 +0 +4 −0 −6

=6

 Exercise 9.8.2

Find the determinant of the 3 × 3 matrix.

∣1 −3 7∣
∣ ∣
det(A) = 1 1 1
∣ ∣
∣1 −2 3∣

Answer
−10

 Q&A: Can we use the same method to find the determinant of a larger matrix?

No, this method only works for 2 × 2 and 3 × 3 matrices. For larger matrices it is best to use a graphing utility or computer
software.

Using Cramer’s Rule to Solve a System of Three Equations in Three Variables

Now that we can find the determinant of a 3 × 3 matrix, we can apply Cramer’s Rule to solve a system of three equations in three
variables. Cramer’s Rule is straightforward, following a pattern consistent with Cramer’s Rule for 2 × 2 matrices. As the order of
the matrix increases to 3 × 3 , however, there are many more calculations required.
When we calculate the determinant to be zero, Cramer’s Rule gives no indication as to whether the system has no solution or an
infinite number of solutions. To find out, we have to perform elimination on the system.
Consider a 3 × 3 system of equations.
a1 x + b1 y + c1 z = d1 (9.8.7)

a2 x + b2 y + c2 z = d2 (9.8.8)

a3 x + b3 y + c3 z = d3 (9.8.9)

Dx Dy Dz
x = ,y= ,z= ,D≠0
D D D

where
∣ a1 b1 c1 ∣ ∣ d1 b1 c1 ∣ ∣ a1 d1 c1 ∣ ∣ a1 b1 d1 ∣
∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣
D = a2 b2 c2 , Dx = d2 b2 c2 , Dy = a2 d2 c2 , Dz = a2 b2 d2 (9.8.10)
∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣
∣ a3 b3 c3 ∣ ∣ d3 b3 c3 ∣ ∣ a3 d3 c3 ∣ ∣ a3 b3 d3 ∣

Access for free at OpenStax 9.8.5 https://math.libretexts.org/@go/page/1390

If we are writing the determinant D ,we replace the x column with the constant column. If we are writing the determinant D ,we
x y

replace they y column with the constant column. If we are writing the determinant D ,we replace the z column with the constant
z

column. Always check the answer.

 Example 9.8.4: Solving a 3 × 3 System Using Cramer’s Rule

Find the solution to the given 3 × 3 system using Cramer’s Rule.

x +y −z = 6

3x − 2y + z = −5

x + 3y − 2z = 14

Solution
Use Cramer’s Rule.
∣1 1 −1 ∣ ∣ 6 1 −1 ∣ ∣1 6 −1 ∣ ∣1 1 6 ∣
∣ ∣ ∣ ∣ ∣ ∣ ∣ ∣
D =
∣
3 −2 1
∣
,Dx =
∣
−5 −2 1
∣
,D y =
∣
3 −5 1
∣
,Dz =
∣
3 −2 −5
∣
∣1 3 −2 ∣ ∣ 14 3 −2 ∣ ∣1 14 −2 ∣ ∣1 3 14 ∣

Then,
Dx −3
x = = =1
D −3

Dy −9
y = = =3
D −3

Dz 6
z = = = −2
D −3

The solution is (1, 3, −2).

 Exercise 9.8.3

Use Cramer’s Rule to solve the 3 × 3 matrix.

x − 3y + 7z = 13

x +y +z = 1

x − 2y + 3z = 4

Answer
3 12
(−2, , )
5 5

 Example 9.8.5A: Using Cramer’s Rule to Solve an Inconsistent System

Solve the system of equations using Cramer’s Rule.

3x − 2y = 4 (9.8.11)

6x − 4y = 0 (9.8.12)

Solution
We begin by finding the determinants D, D ,and D . x y

∣3 −2 ∣
D =∣ ∣ = 3(−4) − 6(−2) = 0
∣6 −4 ∣

We know that a determinant of zero means that either the system has no solution or it has an infinite number of solutions. To
see which one, we use the process of elimination. Our goal is to eliminate one of the variables.
1. Multiply Equation 9.8.11 by −2.

Access for free at OpenStax 9.8.6 https://math.libretexts.org/@go/page/1390

 2. Add the result to Equation 9.8.12.
− 6x + 4y = −8

6x − 4y = 0
––––––––––––
0 = −8

We obtain the equation 0 = −8 , which is false. Therefore, the system has no solution. Graphing the system reveals two
parallel lines. See Figure 9.8.1.

Figure 9.8.1

 Example 9.8.5B: Use Cramer’s Rule to Solve a Dependent System

Solve the system with an infinite number of solutions.

x − 2y + 3z = 0 (9.8.13)

3x + y − 2z = 0 (9.8.14)

2x − 4y + 6z = 0 (9.8.15)

Solution
Let’s find the determinant first. Set up a matrix augmented by the first two columns.
∣ 1 −2 3 1 −2 ∣
∣ ∣
∣ 3 1 −2 3 1 ∣
∣ ∣
∣ 2 −4 6 2 −4 ∣

Then,
1(1)(6) + (−2)(−2)(2) + 3(3)(−4) − 2(1)(3) − (−4)(−2)(1) − 6(3)(−2) = 0

As the determinant equals zero, there is either no solution or an infinite number of solutions. We have to perform elimination to
find out.
1. Multiply Equation 9.8.13 by −2 and add the result to Equation 9.8.15:

− 2x + 4y − 6x = 0

2x − 4y + 6z = 0
–––––––––––––––––
0 =0

2. Obtaining an answer of 0 = 0 , a statement that is always true, means that the system has an infinite number of solutions.
Graphing the system, we can see that two of the planes are the same and they both intersect the third plane on a line. See
Figure 9.8.2.

Access for free at OpenStax 9.8.7 https://math.libretexts.org/@go/page/1390

 Figure 9.8.2

Understanding Properties of Determinants

There are many properties of determinants. Listed here are some properties that may be helpful in calculating the determinant of a
matrix.

 PROPERTIES OF DETERMINANTS
1. If the matrix is in upper triangular form, the determinant equals the product of entries down the main diagonal.
2. When two rows are interchanged, the determinant changes sign.
3. If either two rows or two columns are identical, the determinant equals zero.
4. If a matrix contains either a row of zeros or a column of zeros, the determinant equals zero.
5. The determinant of an inverse matrix A is the reciprocal of the determinant of the matrix A .
−1

6. If any row or column is multiplied by a constant, the determinant is multiplied by the same factor.

 Example 9.8.6: Illustrating Properties of Determinants

Illustrate each of the properties of determinants.
Solution
Property 1 states that if the matrix is in upper triangular form, the determinant is the product of the entries down the main
diagonal.
1 2 3
⎡ ⎤

A =⎢0 2 1 ⎥
⎣ ⎦
0 0 −1

Augment A with the first two columns.

⎡ 1 2 3 1 2 ⎤

A =⎢ 0 2 1 0 2 ⎥
⎢ ⎥
⎣ 0 0 −1 0 0 ⎦

Then

det(A) = 1(2)(−1) + 2(1)(0) + 3(0)(0) − 0(2)(3) − 0(1)(1) + 1(0)(2)

= −2

Property 2 states that interchanging rows changes the sign. Given

−1 5
A =[ ]
4 −3

det(A) = (−1)(−3) − (4)(5)

= 3 − 20

= −17

Access for free at OpenStax 9.8.8 https://math.libretexts.org/@go/page/1390

 4 −3
B =[ ]
−1 5

det(B) = (4)(5) − (−1)(−3)

= 20 − 3

= 17

Property 3 states that if two rows or two columns are identical, the determinant equals zero.

⎡ 1 2 2 1 2 ⎤

A =⎢ 2 2 2 2 2 ⎥
⎢ ⎥
⎣ −1 2 2 −1 2 ⎦

det(A) = 1(2)(2) + 2(2)(−1) + 2(2)(2) + 1(2)(2) − 2(2)(1) − 2(2)(2)

= 4 −4 +8 +4 −4 −8

=0

Property 4 states that if a row or column equals zero, the determinant equals zero. Thus,

1 2
A =[ ]
0 0

det(A) = 1(0) − 2(0)

=0

Property 5 states that the determinant of an inverse matrix A −1

is the reciprocal of the determinant A . Thus,
1 2
A =[ ]
3 4

det(A) = 1(4) − 3(2)

= −2

−2 1
⎡ ⎤
−1
A = 3 1
⎣ − ⎦
2 2

1 3
−1
det(A ) = −2 (− )− (1)
2 2

1
=−
2

Property 6 states that if any row or column of a matrix is multiplied by a constant, the determinant is multiplied by the same
factor. Thus,

1 2
A =[ ]
3 4

det(A) = 1(4) − 2(3)

= −2

2(1) 2(2)
B =[ ]
3 4

det(B) = 2(4) − 3(4)

= −4

 Example 9.8.7: Using Cramer’s Rule and Determinant Properties to Solve a System

Find the solution to the given 3 × 3 system.

2x + 4y + 4z = 2 (9.8.16)

3x + 7y + 7z = −5 (9.8.17)

x + 2y + 2z = 4 (9.8.18)

Access for free at OpenStax 9.8.9 https://math.libretexts.org/@go/page/1390

 Solution
Using Cramer’s Rule, we have
2 4 4
⎡ ⎤
D =⎢3 7 7⎥
⎣ ⎦
1 2 2

Notice that the second and third columns are identical. According to Property 3, the determinant will be zero, so there is either
no solution or an infinite number of solutions. We have to perform elimination to find out.
1. Multiply Equation 9.8.18 by – 2 and add the result to Equation 9.8.16.
−2x − 4y − 4x = −8

2x + 4y + 4z = 2

0 = −6

Obtaining a statement that is a contradiction means that the system has no solution.

 Media

Access these online resources for additional instruction and practice with Cramer’s Rule.
Solve a System of Two Equations Using Cramer's Rule
Solve a Systems of Three Equations using Cramer's Rule

Key Concepts
a b
The determinant for [ ] is ad − bc . See Example 9.8.1.
c d

Dx Dy
Cramer’s Rule replaces a variable column with the constant column. Solutions are x = ,y= . See Example 9.8.2.
D D
To find the determinant of a 3 × 3 matrix, augment with the first two columns. Add the three diagonal entries (upper left to
lower right) and subtract the three diagonal entries (lower left to upper right). See Example 9.8.3.
To solve a system of three equations in three variables using Cramer’s Rule, replace a variable column with the constant column
Dx Dy Dz
for each desired solution: x = ,y= ,z= . See Example 9.8.4.
D D D
Cramer’s Rule is also useful for finding the solution of a system of equations with no solution or infinite solutions. See Example
9.8.5 and Example 9.8.6.

Certain properties of determinants are useful for solving problems. For example:
If the matrix is in upper triangular form, the determinant equals the product of entries down the main diagonal.
When two rows are interchanged, the determinant changes sign.
If either two rows or two columns are identical, the determinant equals zero.
If a matrix contains either a row of zeros or a column of zeros, the determinant equals zero.
The determinant of an inverse matrix A is the reciprocal of the determinant of the matrix A .
−1

If any row or column is multiplied by a constant, the determinant is multiplied by the same factor. See Example 9.8.7 and
Example 9.8.8.

This page titled 9.8: Solving Systems with Cramer's Rule is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by
OpenStax via source content that was edited to the style and standards of the LibreTexts platform; a detailed edit history is available upon request.
11.8: Solving Systems with Cramer's Rule by OpenStax is licensed CC BY 4.0. Original source:
https://openstax.org/details/books/precalculus.

Access for free at OpenStax 9.8.10 https://math.libretexts.org/@go/page/1390