Scribd
Upload
69 views1 page

Plan (Showing RCC Pedestal and Elastomeric Bearing

The document provides specifications for elastomeric bearings used to support a bridge structure. It specifies the maximum and minimum vertical design loads of 196.37 tons and 71.03 tons respectively that the bearings must be capable of resisting. It also includes an isometric view and sectional detail of the elastomeric bearing design.

Uploaded by

Shivam Sharma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
69 views1 page

Plan (Showing RCC Pedestal and Elastomeric Bearing

The document provides specifications for elastomeric bearings used to support a bridge structure. It specifies the maximum and minimum vertical design loads of 196.37 tons and 71.03 tons respectively that the bearings must be capable of resisting. It also includes an isometric view and sectional detail of the elastomeric bearing design.

Uploaded by

Shivam Sharma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

T

L L

6. THE MAX. DESIGN LOAD FOR BEARING :


MAX. VERTICAL LOAD _________196.37T (NORMAL)
T MIN. VERTICAL LOAD __________71.03T (NORMAL)
PLAN THE BEARING SHALL BE CAPABLE TO RESIST
(SHOWING RCC PEDESTAL AND ELASTOMERIC BEARING THE ABOVE DESIGN FORCES AND SAME SHALL
BE CONFIRMED BY MANUFACTURERS.

ISOMETRIC VIEW OF ELASTOMERIC BEARING

DETAIL - X
SECTION 1-1

DIMENSION SCHEDULE FOR BEARINGS

You might also like