Chemistry Worksheets Class 12 On Chapter 10 Haloalkanes and Haloarenes Worksheet With Answer Set 3.docx 1

CBSE Class 12 Chemistry Chapter 10 Haloalkanes and Haloarenes
Worksheet with Answer – Set 3

Q1. n-propyl bromide reacts with ethanolic KOH to form
(a) Propane
(b) Propene
(c ) Propyl alcohol
(d) None of the above
Answer:
(b) n-propyl bromide reacts with ethanolic KOH to form propene.
Q2. The formation of alkane by the action of zinc on alkyl halide is known as
(a) Wurtz reaction
(b) Kolbe’s reaction
(c ) Frankland’s reaction
Answer:
(c ) The formation of alkane by the action of zinc on alkyl halide is known as Frankland’s reaction.
Q3. Chloroform, when treated with benzene in the presence of anhydrous AlCl 3, the product formed is
(a) Chloro benzene
(b) A mixture of ortho and para chloro toluene
(c ) Tri phenyl methane
Answer:
Chloroform when treated with benzene in the presence of anhydrous AlCl 3, the product formed is tri
phenyl methane.
Q4. Phosgene is a common name for

(a) Carbon dioxide and phosphane
(b) Phosphoryl chloride
(c ) Carbonyl chloride
Answer:
(c ) Phosgene is a common name for carbonyl chloride.
Q5. The reactivity of alkyl halides depends upon

(a) The nature of the alkyl group only
(b) The nature of the halogen atom only
(c ) The nature of the alkyl group and halogen atoms
Answer:
(c ) The reactivity of alkyl halides depends upon the nature of the alkyl group and halogen atoms.
Q6. Write the IUPAC names of the following compound.
Answer:
The IUPAC name of the above compound is 3-Bromo-3-Methylhexane.
Q7. How will you convert benzene to 3-bromo nitro benzene?
Answer:
We can convert benzene to 3-Bromo nitro benzene by reacting it with concentrated sulfuric acid and
nitric acid to form nitrobenzene. Nitro benzene then reacts with bromine in the presence of FeBr3 to
form 3-Bromo nitro benzene.
Q8. What will happen when bromine attacks CH2 = CH – CH2 – C ≡ CH?
Answer:
When bromine attacks the molecule of CH2 = CH – CH2 – C ≡ CH, an addition will take place leading to
the formation of CH2 = CH – CH2 – C (Br) = CH (Br) molecule.
Reaction: CH2 = CH – CH2 – C ≡ CH + Br2 → CH2 = CH – CH2 – C (Br) = CH (Br).
Q9. How will you distinguish between C2H5Br and C6H5Br? Also, write the chemical equation involved.
Answer:
We can distinguish between C2H5Br and C6H5Br by heating them with the aqueous solution of sodium
hydroxide. C2H5Br reacts with the aqueous sodium hydroxide solution to give ethanol and sodium
bromide, which reacts with the silver nitrate to give a yellow precipitate of silver bromide. In contrast,
C6H5Br does not react with the aqueous sodium hydroxide solution.
C2H5Br + NaOH → C2H5OH + NaBr + AgNO 3 → C2H5OH + NaNO3 + AgBr
C6H5Br + NaOH → No Reaction
Q10. How will you distinguish between carbon tetrachloride and chloroform? Also, write the chemical
equation involved.
Answer:
We can distinguish carbon tetrachloride and chloroform via the carbyl amine test. Chloroform reacts
with aniline and alcoholic KOH to form phenyl isocyanide which has an awful smell. In contrast, carbon
tetrachloride does not react with aniline and alcoholic KOH.
CHCl3 + C6H5NH2 + 3 KOH (Alc) → C6H5NC + 3 KCl + 3 H2O
CCl4 + C6H5NH2 + 3 KOH (Alc) → No reaction
Q11. Justify the optical activity of 2 - Chloro butane.
Answer:
Optical activity is the ability of a compound to rotate in the plane polarisation of a beam of light that
passes through it. For a compound to be optically active, one carbon must be chiral. It happens when
there are four different atoms or groups attached to it. It must be asymmetrical. 2−Chlorobutane is an
optically active molecule. The carbon at position 2 is chiral. Hence it is optically active.
Q12. What is an ambident nucleophile? Explain with an example.
Answer:
A nucleophile which can perform nucleophilic attacks from two or more places in the molecule (or ion)
is known as an Ambident nucleophile. The attack from these nucleophiles can usually result in the
formation of more than one product.
Cyanide is an example of an ambident nucleophile.
Q13. What is beta elimination?
Answer:
When haloalkane or alkyl halide with a β- hydrogen atom is heated with an alcoholic solution of
potassium hydroxide (i.e. in the presence of alcoholic KOH), the OC2H5− ion acts as a base and
eliminates hydrogen from β- carbon atom. This elimination is known as β- elimination. It is also called
dehydrohalogenation.
Q14. What happens when chlorobenzene is treated with Cl2 / FeCl3?
Answer:
When chlorobenzene is treated with Cl2 / FeCl3, a substitution reaction takes place, leading to the
formation of 1,2 dichloro benzene and 1,4 dichloro benzene.
Q15. Why is Grignard reagent prepared under anhydrous conditions?
Answer:
The Grignard reagent is prepared under anhydrous conditions because it is very reactive. It reacts with
the moisture to form the corresponding alkane.
RMgX + H2O → RH + Mg(OH)X
Q16. What happens when n-butyl chloride is treated with alcoholic KOH?
Answer:
When n-butyl chloride is treated with alcoholic KOH, an elimination reaction leads to the formation of
butene potassium chloride and water.
CH3CH2CH2CH2Cl + KOH (Alc) → CH3CH2CH = CH2 + KCl + H2O
Q17. What happens when methyl bromide is treated with sodium in the presence of dry ether?
Answer:
When methyl bromide is treated with sodium in the presence of dry ether, the Wurtz reaction will take
place, leading to the elimination of the bromide ion and the formation of the successive alkane.
Q18. How would you differentiate between SN1 and SN2 mechanisms of substitution reactions?
Answer:
S. No. SN1 Reaction SN2 Reaction
1. It is a unimolecular reaction. It is a bimolecular reaction.
2. It obeys first-order kinetics. It obeys second order kinetics.
3. It takes place in two steps. It takes place in a single step.
4. The rate of reaction depends on the The rate of reaction depends on the
concentration of substrate. concentration of substrate and the
nucleophile.
5. It takes place via the formation of a It takes place in a single transition

carbocation. state.
6. It leads to the formation of a racemic It leads to an inversion of

mixture. configuration.
7. It is favoured in a polar protic It is favoured in a polar aprotic

solvent. solvent.
8. It can take place with a weak base. It requires a strong base.
9. The rate depends on the halide The rate depends on the halide
structure: 3o > 2o > 1o > CH3X. structure: CH3X > 1o > 2o > 3o.
Q19. How will you convert propene to 1-iodopropane?
Answer:
We can convert propene to 1-iodopropane by reacting it with hydrobromic acid in the presence of
hydrogen peroxide to form n-propyl bromide. N-propyl bromide reacts with the sodium iodide in the
presence of the acetone to form the required product, i.e. 1-iodopropane.
Q20. How will you differentiate between an alkyl halide and an aryl halide?
Answer:
S. No. Alkyl Halide Aryl Halide

1. Alkyl halides are open-chain Aryl halides are aromatic
hydrocarbons in which the hydrogen hydrocarbons in which the
atom is replaced with the halogen hydrogen atom is replaced with the
atom. halogen atom.
2. The halogen atom is attached to the The halogen atom is attached to an

sp3 hybridised carbon atom. sp2 hybridised carbon atom.
3. They are linear or branched. They are ringed.
4. They undergo nucleophilic They do not undergo nucleophilic

substitution reactions. substitution reactions.

Chemistry Worksheets Class 12 On Chapter 10 Haloalkanes and Haloarenes Worksheet With Answer Set 3.docx 1

Uploaded by

Copyright:

Available Formats

Chemistry Worksheets Class 12 On Chapter 10 Haloalkanes and Haloarenes Worksheet With Answer Set 3.docx 1

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Chemistry Worksheets Class 12 On Chapter 10 Haloalkanes and Haloarenes Worksheet With Answer Set 3.docx 1

Uploaded by

Copyright:

Available Formats

CBSE Class 12 Chemistry Chapter 10 Haloalkanes and Haloarenes

Worksheet with Answer – Set 3

(b) n-propyl bromide reacts with ethanolic KOH to form propene.

Q4. Phosgene is a common name for

(c ) Phosgene is a common name for carbonyl chloride.

Q5. The reactivity of alkyl halides depends upon

Q6. Write the IUPAC names of the following compound.

The IUPAC name of the above compound is 3-Bromo-3-Methylhexane.

Q7. How will you convert benzene to 3-bromo nitro benzene?

Reaction: CH2 = CH – CH2 – C ≡ CH + Br2 → CH2 = CH – CH2 – C (Br) = CH (Br).

Q12. What is an ambident nucleophile? Explain with an example.

Q13. What is beta elimination?

Q14. What happens when chlorobenzene is treated with Cl2 / FeCl3?

Q15. Why is Grignard reagent prepared under anhydrous conditions?

1. It is a unimolecular reaction. It is a bimolecular reaction.

2. It obeys first-order kinetics. It obeys second order kinetics.

3. It takes place in two steps. It takes place in a single step.

5. It takes place via the formation of a It takes place in a single transition

6. It leads to the formation of a racemic It leads to an inversion of

7. It is favoured in a polar protic It is favoured in a polar aprotic

8. It can take place with a weak base. It requires a strong base.

Q19. How will you convert propene to 1-iodopropane?

S. No. Alkyl Halide Aryl Halide

2. The halogen atom is attached to the The halogen atom is attached to an

3. They are linear or branched. They are ringed.

4. They undergo nucleophilic They do not undergo nucleophilic

You might also like